2008 Acura TSX - Episode 2: Valve Cover Gasket Time
Рет қаралды 1,466
6 ай бұрынOur initial inspection of the 2008 Acura TSX revealed some oil leaks originating from the valve cover area. It's our duty now to replace the valve cover gasket, the spark plug well gaskets, and the gaskets around the valve cover bolts to seal this valvetrain area back up. Let's put a stop to these annoying oil leaks.
@slowedrolitas8917 4 ай бұрын
Awesome work , this is very useful!
@autoobsessivegarage 4 ай бұрын
Glad it helped!
@bounlomphouachith1326 Ай бұрын
is a good VDO But you did not show the point where or how to put the ring in where you tap them down?
@autoobsessivegarage Ай бұрын
You may have missed that section of the video, but the spark plug tube gasket installation is detailed at 7:48.
@AdiRuparel 14 күн бұрын
you should have adjusted the valve clearance with this job
@autoobsessivegarage 12 күн бұрын
Trust me, every time I remove a valve cover I check the valve clearance. I stopped adding that footage if no adjustment was necessary. Figured 15 mins of feeler gauge action in every VC gasket video wasn’t the most entertaining. This TSX was perfectly in spec.
Симбочка Пимпочка
Рет қаралды 2,5 МЛН
Fel-Pro Gaskets
Рет қаралды 279 М.
Donny The Late Model Tech
Рет қаралды 131 М.
How to Automotive
Рет қаралды 33 М.
Levon_Mkr
Рет қаралды 1,1 МЛН
Mechanic BD
Рет қаралды 3 МЛН
Серёга, Чтоб Вы поняли
Рет қаралды 3,3 МЛН
Доступное право. Юристы
Рет қаралды 1,9 МЛН