How to Replace Throttle Body 02-06 Nissan Altima

No video

How to Replace Throttle Body 02-06 Nissan Altima

Рет қаралды 216,308

1A Auto: Repair Tips & Secrets Only Mechanics Know

7 жыл бұрын

Buy Now!
New Throttle Body Assembly from 1AAuto.com 1aau.to/ib/1ATB...
1A Auto shows you how to repair, install, fix, change or replace rusted, corroded, or stuck throttle body. This video is applicable to the 02, 03, 04, 05, 06 Nissan Altima
This process should be similar on the following vehicles:
2002 Nissan Altima
2003 Nissan Altima
2004 Nissan Altima
2005 Nissan Altima
2006 Nissan Altima
🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/oSI/1AX...
• 10mm Socket 1aau.to/oK7/1AX...
• 8mm Socket 1aau.to/oK7/1AX...
• Ratchet 1aau.to/oWi/1AX...
• Socket Extensions 1aau.to/oSf/1AX...
• Brake Parts Cleaner
• Paper Towels 1aau.to/ohL/1AX...
• 5mm Hex Wrench
Subscribe: / @1aauto
Check out our playlist:
Nissan Altima 2002-2006 3rd gen: • Nissan Altima 2002-200...
For More Info visit us at 1aau.to/h/acN/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Пікірлер: 138

@1AAuto 3 жыл бұрын

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*

@MeetJoeBlack55 3 жыл бұрын

Just an FYI .... your procedure didn't take ... you were still idling at 900 RPM. Don't be afraid to run the procedure SEVERAL TIMES until the idle falls down and then recovers to the proper level .... it sometimes takes MANY ATTEMPTS before you get the exact procedure done with the correct timing. You will know when it is done correctly when your final startup idles high.. then goes down .. then settles at the correct level. I had to do mine SIX TIMES before it took, but luckily I was informed of the multiple attempts sometimes needed. It's a tricky procedure getting the timing right, the pedal depressing right, and just a few seconds off either way can disrupt the whole procedure .... KEEP TRYING ... it will work.

@1AAuto 3 жыл бұрын

+Joe Black We appreciate the feedback. Sometimes there are multiple ways to accomplish the same repair.

@ryanhodges7101 6 жыл бұрын

Why do manufacturers make things so over complicated? All those steps and procedures to reprogram it were unbelievable.

@casanovaevren 5 жыл бұрын

Fuel economy of course.. I have got a carburetor i have got one screw to do all of the idle adjustment to my liking

@davecrupel2817 4 жыл бұрын

Thats modern computer-cars for you. I hate them.

@bsfatboy 2 жыл бұрын

if they kept it simple they, someone might accidentally do it without knowing.

@bgjobass Жыл бұрын

Very frustrating , I’ve had no luck getting this to work, installed new throttle body and TOS motor assembly, followed procedures exactly , didn’t work, so the car sits , not useable

@omarsosa9638 Жыл бұрын

@@bgjobass use this vid it was the only one that worked for mine kzfaq.info/get/bejne/fLSFqtVpqc6Wp2Q.html

@stevenA44 7 ай бұрын

Anytime I need to find out how to do something to my 2005 Nissan Altima 2.5, I always check here first! Wish I could find more videos of some common problems with my vehicle, like how to fix the fuel gauge not showing the correct amount of fuel, or how to fix the dome light not working.

@jaymccoy9494 4 жыл бұрын

Thanks bunches. Ive been trying several times a day for a week now. Found this video. Worked like a charm.

@1AAuto 4 жыл бұрын

+Jay McCoy Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1AAuto.com

@squirrelcovers6340 Жыл бұрын

That's a RIDICULOUS relearn procedure😂😂😂😂

@davidm6197 5 жыл бұрын

Quick question, even though i have no check engine light on and just want to remove the throttle body and clean it, do i still have to perform the relearn process?

@meemee9302 5 жыл бұрын

David M yes

@armandoperez2484 Жыл бұрын

No matter what, your videos always are so professional and direct to the point. Probably I will do that for my 1999 S70 volvo . Do you have the part? Ah and the most important thing, do I have to do the same process or is different for my S70? Thank you so much.

@AlbertoMartinez-tk9si 5 жыл бұрын

How do you do the last step when your car is push to start will it affect the process if I step on the brake to turn in my car ?

@layback3491 2 жыл бұрын

When replacing this. Does this give the vehicle more power??

@alan4sure Жыл бұрын

Probably not.

@KevinBeGood 2 жыл бұрын

So my idle keeps surging up and down and won't stabilize after cleaning my throttle body did I mess it up.? Your steps aren't working for me 03 nissan altima 2.5 4 cylinder

@legendofthestrings1 6 жыл бұрын

hey this was great thanks. I just did mine this morning. Had to replace the top intake too.

@soldierdiehard5397 2 жыл бұрын

Great stuff , explained very well. thank you Master ! I have learned something today. You are really great teacher. Salamat, Arigato, gracias, donkinshon. Means , Thank you.

@kxkaz9292 8 ай бұрын

i couldn’t do the idle and had to drive on it. it won’t reset anymore the engine light won’t flash, what do i do?

@_papa._popa._71 2 жыл бұрын

Could u give me directions on how to do this on a Nissan 2008 Altima it’s kinda weird since I have a push start instead of the key my part comes in tmr I would love help 😅

@quepe7211 2 жыл бұрын

Question: Do you have to relearn the throttle body if you're just cleaning the throttle body & mass air flow sensor??

@Alnahdabldg 6 жыл бұрын

i love it ..thanks from Morocco

@user-uc9mr8jy9s 3 жыл бұрын

How to do the relearning process with a push-to-start? Thanks for the video!

@eliezerramosjr1017 3 жыл бұрын

Same procedure push button twice for run position without starting.

@_papa._popa._71 2 жыл бұрын

@@eliezerramosjr1017 I’m lost bro I have a push start could you help

@bigfox9218 2 жыл бұрын

Can I do this procedure for my 2017 Nissan Altima 2.5L L4 after I take my throttle body off to clean it? My car been doing this rough idling for 2 months now and I’ve changed idle pulley, serpentine belt, Ac compressor pulley, fuel injector system cleaning, and it’s still giving me this rough idling and it gets worse when I put my ac on.. Earthquake car omg😢

@DTUFINOPhotography 2 жыл бұрын

I'm installing a brand new TB tomorrow, my old one failed. Do i need to clean the new TB with TB cleaner before installing? Just curious.

@fuckgoogle7314 6 жыл бұрын

Can you replace the TPS without replacing the whole throttle body?

@jacobmoon6191 6 жыл бұрын

FUCKgoogle+ yes

@alan4sure Жыл бұрын

Nope

@jaykey6166 5 жыл бұрын

I have 2015 nissan altima 2.5s almost 60k miles plan on cleaning throttle body and mass flow sensor, if i unplug negative terminal, will it relearn or whats the process?

@josephhbangers9697 3 жыл бұрын

I have a 2013 nissan sentra i disconnected the negative and positive battery cables and i just loosen the throttle body i moved the throttle plate a little bit gently where i used shop towel i sprayed throttle cleaner on towel and wiped the plate and the edge and put it together i never had check engine light on seems to not hestitate as bad

@masonbackus8688 5 жыл бұрын

where is the throttle position sensor?? the replacement I bought from autozone was said to fit my car but doesn’t look like it’ll fit anywhere

@23e445 4 жыл бұрын

Excellent this guy know what he is doing!!!

@1AAuto 4 жыл бұрын

+Hall of Fame Thanks for checking us out! 1AAuto.com

@ronald911 Жыл бұрын

Need to know the relearn procedure

@robmcguire9756 Жыл бұрын

Did mine it worked until I turned on the ac then the cel came on error code was idle to high I was at 600rpm ac off 800rpm ac on

@alan4sure Жыл бұрын

Are you sure about that 64 inch pounds torque? Seems high--- I tried 40 inch lbs torque on a 3/8" nut and bolt with a pile of washers in between. The washers were deforming under the bolt head yet the (new) torque wrench still hadn't reached the slip point. ???

@marcoaguilar793 5 жыл бұрын

So I just installed a new throttle body on my 05 nissan altima 3.5 and when I did the reprogramming the check engine light did not come on? But I took it for a drive around the block seemed pretty good. Just wanted to know if that would be a problem if the check engine light did not come on and im driving it. Pls help

@felixbeltran7919 5 жыл бұрын

I'm having issues with my nissanno5 murano. I accelerate and it stutters

@rameshm2100 5 жыл бұрын

spring 12 Hey thanks for the video. I wonder if you can help with an issue. I replaced the maf sensor and the cleaned the throttle body on maxima 2011. Then the car did not run right and when pressing the gas hard , it seems that there was no air and the car was gasping for air. Took it to one mechanic after charging 120 bucks he said he can’t fix it. i took it to anther , he couldn’t fix it either. So I took the car home and opened it up again and I when I opened the part that fit to throttle body the whole thing came off. There is a tubing connection that goes under the throttle body and it just came off. Not sure where this thing connects to

@JB-zy4me 6 жыл бұрын

Hello I have Nissan Maxima 2006 I think throttle is bad but if I replace do I have to reprogram again and are you selling them

@volodymyrbuchak1852 6 жыл бұрын

Jasar B You think,or you know for sure?Usualy you’ll get the P2135 code for TPS ,i have the same car,changed it to used one from junkyard,works good,had to programm it

@cramos6638 5 жыл бұрын

Jasar B what were the the symptoms of your old part. My car only idles & won't accelerate. Also getting that code?

@ogstyle4817 5 жыл бұрын

@@volodymyrbuchak1852 when u bought the used throttle, did u reprogram it ?

@Sroor2023 5 жыл бұрын

Xterra 2007 Iam getting this code now p2135 and will have a trip to junkyard and hope thats will be ok no luck on cleaning throttle which was so help full with valvtronic selenoid and worked like a charm by ultrasonic cleaner and injector cleaner tester on off and every thing is ok after that iam getting p2135 🤪 🤒😓 whats this 🤕🤧 iam sick hope this will be last problem before New one on the road 😁

@jaguarblack4332 2 жыл бұрын

The elbow thats connected in between the intake air tube to the breather hose is completely ripped. Can that be the case of why my car is in limp mode? It's in limp mode right after I cleaned throttle without taking it apart, new crankshaft sensor, and spark plugs.

@1AAuto 2 жыл бұрын

+JaguarBlack We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

@shenton18 4 жыл бұрын

Is this procedure the same on a 2013 Altima in terms of the relearning procedures ?

@1AAuto 4 жыл бұрын

+Nixon Hazell. It may be a similar procedure, but at this time we do not have the install video for your vehicle. Thanks for checking us out!

@your1fan32 5 жыл бұрын

Why not just clean it? When would you have to replace the throttle body?

@oubimcius4032 5 жыл бұрын

I have to replace mines right now. Car wont start sometimes.

@nicholmoore4899 2 жыл бұрын

What is the book time on this? I need this done on my Altima

@rapidtransit8373 4 жыл бұрын

I'm going to do mine when i get home from work.Im not replacing but just doing the relearning process. The way you explained it . I should have no problem. I'll let you know how it goes.

@1AAuto 4 жыл бұрын

+Rapid Transit Best of luck with your repairs!

@rapidtransit8373 4 жыл бұрын

@@1AAuto I tried the relearning process the next day. But I didn't have a voltage meter to check the battery. But tried it anyway. After I pumped the gas 5 times in 5 secs. The check engine light didn't start blinging. Do you think thats from not checking voltage?? And if not up to voltage would it cause this to happen?

@amyshoemaker7909 2 жыл бұрын

What if the car won't crank.to do the 2nd part of the relearning process? It turns over but it's not cranking. I really need help.

@armandoperez2484 Жыл бұрын

Great question 🤔

@ginocapone7783 2 жыл бұрын

Can I do this on a 2012 altima

@richardflores8771 4 жыл бұрын

I'm about to do my throttle body as well. But are all 3 relearning procedures the same for a 2005 nissan sentra 1.8 ??

@1AAuto 4 жыл бұрын

+Richard Flores We don't have a how-to video for your vehicle right now, but the basic steps in this video should be enough to do this task. Buy this part for your vehicle on 1AAuto.com: 1aau.to/m/Shop-1AAuto-c

@dope1808 3 жыл бұрын

Can all these procedures work on a 2005 vqde?

@ayeayekaying 2 жыл бұрын

Can you set it as many times as you want ?

@scottyj1643 3 жыл бұрын

Is the throttle positioning sensor connected to the throttle body itself. cant find any info on it.

@1AAuto 3 жыл бұрын

+ScottyJ Thanks for checking us out! The throttle position sensor is attached to the throttle body assembly.

@argentino901 4 жыл бұрын

will this work for a 2007 GMC acadia? I have a reduce Engine message and the mechanic told me that I need to replace the BT, but He said I can't do it myself because it needs to be reprogram.

@1AAuto 4 жыл бұрын

+argentino901 We don't have a how-to video for your vehicle right now, but the basic steps in this video should be enough to do this task. Buy this part for your vehicle on 1AAuto.com: 1aau.to/m/Shop-1AAuto-c

@embergreenidge 3 жыл бұрын

Would this be the same work for the 2006 Nissan Murano? I think that is the problem with mine.

@alan4sure Жыл бұрын

Yes.

@HassanKhan-qx5wl 3 жыл бұрын

Hi, yesterday I drove my car to the Mountains, and the acceleration was dying and felt like the gear or engine will fall, I change CVT Oil a couple of days ago and cleaned Mass Air Flow Sensor too but the problem was a little back then now. While driving on a normal road the gear is like pushing the car. Please help me I have a small family and I was hoping yesterday that I at least reach home and reached.

@1AAuto 3 жыл бұрын

+Hassan Khan We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

@omaraguilar9645 3 жыл бұрын

Is the steps for throttle body idle volume learning the same for manual Nissan?

@1AAuto 3 жыл бұрын

+Omar Aguilar Yes the procedure should be the same for a standard transmission.

@omaraguilar9645 3 жыл бұрын

@@1AAuto Ive been trying it multiple times and I cant get the Service engine light to blink after stepping on and of the gas 5 times

@marvinguevara2996 6 жыл бұрын

I put a new throttle in mine and dude the te-learn and still goes out to 1500rpms ??(new throttle installed alreay

@geometro8055 5 жыл бұрын

I have the same problem, wish they would reply

@Tonychavez8226 4 жыл бұрын

Geometro805 yep

@techreviews3968 4 жыл бұрын

Vacuum leak or bad throttle body or connector on tps

@alan4sure Жыл бұрын

Shouldn't you clear any error codes before disconnecting battery negative?

@jacobmoon6191 6 жыл бұрын

Do you still have to do this process when you're just removing the old throttle body and putting it back on or when you're only getting a new throttle body?

@1AAuto 6 жыл бұрын

+Jacob Moon It should only have to be done if you are installing a new one! 1aauto.com

@jacobmoon6191 6 жыл бұрын

1A Auto Parts Sorry I should have explained that better. Will I have to do a hard reset if I'm putting the old throttle body back on?

@juansorto6162 2 жыл бұрын

What temp should it be at

@Rickedafied 3 жыл бұрын

Should the idle relearn be done every so many miles or years? I have an 03 altima 2.5 L and the engine shakes at idle in drive and in reverse. Can this be a sign of a need of idle relearn? or throttle body cleaning? I already changed all motor mounts and belt tensioner.

@PLATINUM2U 3 жыл бұрын

You might need a new valve cover if oil is on the spark plugs. I had shaking and misfire from a old valve cover. Try replacing it and your spark plugs... but it also could be your coil packs

@meestadeuce 2 жыл бұрын

@@PLATINUM2U is absolutely correct. I changed battery, fuel pump, alternator, cam and crank sensors(aftermarket then after they failed got nissan ones) spark plugs, coil packs, and a valve cover(had oil pooled up in cylinder 1and was getting misfires). Car wasn't maintained for years. Runs so much better. Got a p0507 code so im gonna clean the etb and then do the relearn. Tinted it, changed the radio, painted it with a maaco deal, got some junkyard rims and painted them and the calipers. Feels like a new car to me lol.

@eandesavingchallenges 4 жыл бұрын

You guys did it again. $17 instead of $350. I think I found a new calling.

@1AAuto 4 жыл бұрын

+Essie Roger Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1AAuto.com

@mranoraks5860 3 жыл бұрын

If you are doing it your self when you buy the new electronic throttle body . you will get a papper its the warranty and idle relearn procedure for your car.

@1AAuto 3 жыл бұрын

+mr anoraks Thanks for the feedback!

@_papa._popa._71 2 жыл бұрын

So it gives u paper instructions on what to do??

@nickibarra5217 4 жыл бұрын

would the relearn be same steps on a 3.5 v6 2009 altima???

@1AAuto 4 жыл бұрын

+Nick Ibarra The part in this video fits your application, and the install should be the same or similar. Buy this part on 1AAuto.com: 1aau.to/m/Shop-1AAuto-c

@jalixortiz8228 2 жыл бұрын

Is it the same for a rogue 2015 T32??

@1AAuto 2 жыл бұрын

+Jalix Ortiz We don't have a how-to video for your vehicle right now, but the basic steps in this video should be enough to do this task. Buy this part for your vehicle on 1AAuto.com: 1aau.to/m/Shop-1AAuto-c

@fernandor887 3 жыл бұрын

Will it be the same for a nissan sentra 2.5

@1AAuto 3 жыл бұрын

+Fernando R The part in this video fits your application, and the install should be the same or similar. Buy this part on 1AAuto.com: 1aau.to/m/Shop-1AAuto-c

@tomyperez3120 5 жыл бұрын

What happens if I continue to drive it while the check engine light is on about the throttle body?

@1AAuto 5 жыл бұрын

+Tomy Perez If your vehicle is misfiring, you can impact damage to the catalytic converter (which might give codes for your O2 sensor), excess unburnt fuel can break down your oil, and overall you will have poor driving performance

@deliliahprice7551 6 жыл бұрын

I need some help plz. So i took the intake tube of and a bunch of oil spilled out of the tube. What does that mean?

@karmavr3358 5 жыл бұрын

Deliliah Price did you even take the right one off? Because that ain’t supposed to happen

@mcncheese1235 5 жыл бұрын

Deliliah Price lol

@xKillZone99 Жыл бұрын

seems easier than replacing the crankshaft position sensor... my God that was s nightmare

@don_juan9582 6 жыл бұрын

Is it the same procedure for a 2002 Nissan altima manual transmission

@1AAuto 6 жыл бұрын

+don_juan Yes as long as you have the 2.5L engine too.

@don_juan9582 6 жыл бұрын

I replaced the throttle body and did all the other steps and it when I turn it on it won't go past 15 mph

@WalterBarger-io9ck Жыл бұрын

Quarter inch torque wrench you can't even hear it click

@MrJpagan2 6 жыл бұрын

Is this the same for a 2004 maxima ?

@1AAuto 6 жыл бұрын

+jose pagan It may be a different procedure on your application. We currently do not have an auto repair video for this particular year, make and model. Thank you for asking. 1aauto.com

@delta8911 4 жыл бұрын

Is this procedure the same for an 04 Nissan maxima? I❤ your channel 🙌🍀

@bandotv1267 4 жыл бұрын

The title clearly reads 02-06 Altima. Hope that was helpful lol

@elbaron51 6 жыл бұрын

can this procedure be done on a 3.5 engine

@1AAuto 6 жыл бұрын

+el baron R We currently do not have an auto repair video that covers this particular repair. We will keep this request in mind in the event that we need to make this repair in the future. 1aauto.com

@volodymyrbuchak1852 6 жыл бұрын

el baron R All Nissans have the same process,i did it on my 06 Maxima 3.5 works good,

@Vadum6959 3 жыл бұрын

Okay I just want to point out something that I saw smoke during the part of 8:30-8:40 in the engine part area

@eliezerramosjr1017 3 жыл бұрын

DIDNT noticed till I went back but seen it and it could be the new throttle body and/or the cleaner they used.

@blueviper520 7 жыл бұрын

Nice video. What are symptoms of a bad throttle body?

@1AAuto 7 жыл бұрын

+Miguel Gonzalez You may get a hesitation when you step on the gas

@blueviper520 7 жыл бұрын

I have a 2003 Nissan altima with the same engine as this one and after I removed the throttle body and cleaned it. I did the throttle body reprogram and I have been noticing that when I accelerate it accelerates slowly and then it starts to accelerate fast and when it shifts I feel the car jerk forward like it suddenly gets a push. Could this be caused by the throttle body or is my transmission going out? I checked the transmission fluid and it looks red and is filled to the top and it doesn't smell burnt. Any advice would be greatly appreciated. Thank you.

@JLE1177 6 жыл бұрын

Miguel Gonzalez mine is doing the same, I’m cleaning the throttle now.

@akemihomura3300 6 жыл бұрын

I have the exact same issue. Did it work for you?

@akemihomura3300 6 жыл бұрын

Did it work :o ? I've tried it in the past several times, but I'm not sure if the sequence was done correctly.

@shonnabp5028 4 жыл бұрын

What kind of throttle is this ?

@1AAuto 4 жыл бұрын

+Shonna Bp This throttle body is from our company 1A Auto!

@shonnabp5028 4 жыл бұрын

So I have a Nissan Altima 2006 I was just wondering how do I know which throttle body to get for my car

@shonnabp5028 4 жыл бұрын

Or is there no specific type ?

@pescayaprendizaje 5 жыл бұрын

Were is ur location

@1AAuto 5 жыл бұрын

+pesca y aventura Thanks for watching! We have two warehouse locations where we ship our parts from. One is in Kansas and the other is in Massachusetts. 1aauto.com