How to Replace Throttle Body 97-06 BMW 325 Xi

Рет қаралды 36,115

1A Auto: Repair Tips & Secrets Only Mechanics Know

5 жыл бұрын

Shop for New Auto Parts at 1AAuto.com 1aau.to/c/229/n/throttle-body-...
In the video, 1A Auto shows how to remove and replace a stuck, soiled, clogged, or failing throttle body assembly. The video is applicable to the 97, 98, 99, 00, 01, 02, 03, 04, 05, 06, BMW 325Xi, and similar 3 series vehicles.
This process should be similar on the following vehicles:
2001 BMW 325Xi
2002 BMW 325Xi
2003 BMW 325Xi
2004 BMW 325Xi
2005 BMW 325Xi
2006 BMW 325Xi
🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/ouI/1AXAA00013
• 10mm Wrench 1aau.to/ofQ/1AXAA00010
• 10mm Socket 1aau.to/orm/1AXAA00017
• 13mm Socket 1aau.to/ouA/1AXAA00015
• 6mm Socket 1aau.to/orm/1AXAA00017
• 8mm Socket 1aau.to/orm/1AXAA00017
• Needle nose pliers 1aau.to/odd/1AXAA00051
• Needle nose pliers 1aau.to/odd/1AXAA00052
• Side Cutters
• T30 Socket
• Ratchet 1aau.to/owi/1AXAA00016
• Socket Extensions 1aau.to/ouA/1AXAA00015
Subscribe: / @1aauto
Check out our playlist:
BMW 325Xi 1997-2006 4th Gen: • BMW 325Xi 1997-2006 4t...
For More Info visit us at 1aau.to/h/bNA/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Пікірлер: 27

@1AAuto 3 жыл бұрын

√

@NorthernChev Жыл бұрын

FUN FACT: The alternator wiring connector and the mass air flow sensor connector are the EXACT same design connector and can be fitted to either one with no problem! Ask me how I know? When you take them off for this job, they both lay in the engine bay right next to one another. Viewer at home: You've been warned.

@comedianredds8022 Жыл бұрын

ok guys in order to change the throttle body, step 1: remove the engine

@Vics251 2 жыл бұрын

I wish I’d seen this video before I did the job on my car. It took me two hours to figure it out. There’s very limited access.

@lem7827 Жыл бұрын

you are amazing, very cool guy and explained very cool

@monty_hendrix 3 жыл бұрын

Excellent video

@samoo8933 2 жыл бұрын

Have e53 3.0 same engine, do I need to change throttle body or just cleaning usually?

@NorthernChev Жыл бұрын

Do not put the actual plastic-handled dipstick in until you've finished putting the air box in. Especially if you replaced the rubber intake hoses and they're still a little stiff. You'll end up snapping that brittle plastic handle off fighting that air box. Never install the dipstick on BMWs or Volvos until you are done.

@blackpassenger 2 жыл бұрын

jeeezus! if only the e46 was that easy. im replacing the TB on my 2000 320 with the m52 engine. Cant get the barrel connector back on the new (or old) throttle body. once the connector is removed, it locks. How the heck does one unlock it?

@blackpassenger 2 жыл бұрын

wow, that looks significantly more difficult than on my 2000 320. by the way, can I buy a new throttle body from you and do you ship to japan?

@harrisjohnny477 4 жыл бұрын

What mechanic do you know starts working from the bottom compared to working on the top why didn't he just take out the throttle body to take out

@meandyou917 2 жыл бұрын

Where is the throttle position sensor located?

@familygunsandrides....8024 4 жыл бұрын

Its kinda of fun how no one says nothing about reprogram the new throttle body . Everyone just says on KZfaq, just replace part and your ready 🙂 to go.....🤔 Interesting.....

@blackterminal 2 жыл бұрын

hmmm theres a lot more room in a 4 cylinder e36

@jonsbmw8199 Жыл бұрын

Wow, u did that soo backwards haha

@swattylizzz454 4 жыл бұрын

Do you have to program it?

@adasterdezaster2865 2 жыл бұрын

The boot was already off the throttle body. Waste of a video getting the boot off is the hardest part. 90% of the time you have to cut it off because you can't get access to the screws holding the clamps on.