How to Replace Valve Cover and Gasket 02-06 Nissan Altima L4 2.5L

No video

How to Replace Valve Cover and Gasket 02-06 Nissan Altima L4 2.5L

Рет қаралды 212,157

1A Auto: Repair Tips & Secrets Only Mechanics Know

Күн бұрын

Buy Now!
New Valve Cover from 1AAuto.com 1aau.to/ia/1AEV...
In this video, 1A Auto shows you how to fix a leaky valve cover and gasket. This video applies to the 02, 03, 04, 05, 06 Nissan Altima
🔧 List of tools used:
• 10mm Socket 1aau.to/oMa/1AX...
• Needle nose pliers 1aau.to/oi2/1AX...
• Needle nose pliers 1aau.to/oi2/1AX...
• Ratchet 1aau.to/o6L/1AX...
• Socket Extensions 1aau.to/oSY/1AX...
• Torque Wrench 1aau.to/orD/1AX...
• Brake Parts Cleaner
• Cloth Rags 1aau.to/of4/1AX...
• Paper Towels 1aau.to/of4/1AX...
• RTV
• 5mm Hex Wrench
• Razor Blade / Gasket Scraper 1aau.to/obr/1AX...
For More Info visit us at 1aau.to/h/aSb/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Пікірлер: 229

@1AAuto 3 жыл бұрын

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*

@jhonatadias1907 4 жыл бұрын

Thank you boss ! Saved me $150 in labor on my Nissan Altima 2005 . After I replaced my valve cover gasket I went to a car wash and washed the engine and it is clean and no leaks so far !!!

@1AAuto 4 жыл бұрын

+Jhonata Dias Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1AAuto.com

@bikerdewd 10 ай бұрын

This video SERIOUSLY SAVED MY BACON! I’m an old school technician who hasn’t had a lot of experience with working on this car. With this video, I was able to get it done VERY QUICKLY!!

@1AAuto 10 ай бұрын

+Bryan Metroka Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c

@monsterthekid1081 7 жыл бұрын

Nice. I don't even own a Altima, but I still like to learn new things👍👍

@henrickwhite9786 2 жыл бұрын

Hey if you want ill sell you one

@imbrok3n882 2 жыл бұрын

Same here lol

@jasonwallis1098 10 ай бұрын

I was looking for a video on valve cover gasket replacement for a 2005 Nissan Altima and ran across your video. I wasn’t sure how difficult the job would be, but this was a great straight forward video on the replacement and exactly what I was looking for. Thanks!

@beverlybooth3617 6 жыл бұрын

My boyfriend doesn't like it when I use google, to search for things related to my issue at the time. Especially when it comes to cars! I really feel that this may be the cause of the problem I am having with my car and this video was absolutely amazing. You made it look so easy, that I feel confident enough to do this myself! Thanks for sharing!

@1AAuto 6 жыл бұрын

+Beverly Booth Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com

@beverlybooth3617 6 жыл бұрын

You're welcome!

@gusti2wire Жыл бұрын

@@beverlybooth3617 are y'all still together lol

@luispalomo1224 5 ай бұрын

Your videos literally have saved me money for these repairs, thank you so much!!

@SeanA88 4 жыл бұрын

Thanks for the video. I replaced mine and I'm no mechanic. Took around 2 hours. So far so good, I'll check after a couple days for leaks. I bought a Nissan valve cover and gasket

@1AAuto 4 жыл бұрын

+Sean Anderson Thanks for checking us out! 1AAuto.com

@RIS1998 3 жыл бұрын

Did you have any leaks?

@nizmo90 3 жыл бұрын

Thanks for the video . My 05 has some oil build up between the valve cover and and engine head. Gonna be doing this once the part comes in

@Coda6766 5 ай бұрын

I really appreciate 1A Auto for these awesome videos.

@penecaballo96 4 жыл бұрын

thanks for the small tutorial you were calm asf and your the bob ross of mechanics

@1AAuto 4 жыл бұрын

+Esau Bonilla Thanks for checking us out! 1AAuto.com

@DoubleBogeyBaker 10 ай бұрын

I’m glad I seen this video. I was about to change just the valve cover gasket until I seen you point out the spark plug gasket was cracked on yours. So just to double check mine I noticed I to had a cracked spark plug gasket. This car is for my daughter when she turns 16 next summer so I wanted to get it all squared away. Thanks!

@benjaminonlyway8051 6 жыл бұрын

Thank you for the video. I installed the gasket and cover with no problems.

@1AAuto 6 жыл бұрын

+Benjamin Campbell Thanks for watching. If any of our viewers needs to make this repair, we carry the auto repair part shown in this video on our website. Here is a link to them www.1aauto.com/2002-06-nissan-altima-sentra-valve-cover-and-gasket/i/1aevc00035?KZfaq&CTA+Comment&Qvqh3DQgsBo

@BabbittGuerrier 6 жыл бұрын

1A Auto Parts do you'll offer military discount?

@montrellrobinson120 Жыл бұрын

Thank you for this video because it looks easier than I thought it would be.

@martyt8099 4 ай бұрын

This is the best step by step descriptive video I’ve seen. Thank you

@truckersteve2520 4 жыл бұрын

You think you guys can make a video for replacing fuel injectors??

@Ahmadfrra 6 жыл бұрын

Amazing, very helpful and smooth tutorial!

@1AAuto 6 жыл бұрын

+Ahmad AlFarra Thanks for watching. If any of our viewers needs to make this repair, we carry the auto repair part shown in this video on our website. Here is a link to them www.1aauto.com/2002-06-nissan-altima-sentra-valve-cover-and-gasket/i/1aevc00035?KZfaq&CTA+Comment&Qvqh3DQgsBo

@Breaking_Chad 2 жыл бұрын

Thanks guys, Replaced mine with no problems.

@1AAuto 2 жыл бұрын

+Demonitized Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

@Andrew-rb4gs 3 жыл бұрын

From doing my 2005 Altima, to get more room under the wiring harness, unplug the O2 sensor connector,the cam sensor, and coolant sensor connector and you'll gain much more room when putting the cover back on.

@JoelRemix 3 жыл бұрын

Nice tip. Thank you

@elink786 4 ай бұрын

Thanks for the video, you forgot about spark plugs. But everything is fine ❤❤❤

@ronaldnichols7334 7 ай бұрын

Thank you for the help . You saved me a lot of money. God bless you and what you do ✝️🙏

@danpeete3014 5 ай бұрын

GREAT JOB!!!!!Thank you for making video.

@yoursmile3500 3 жыл бұрын

Great concise repair instructions. However I found it unnecessary to unclip the spark plug wires. Less chance of confusing the wiring. It was also easier to pull the valve cover off with the back hose attached and pull the hose off separately instead of fighting the lack of room to disconnect it on the car. Otherwise all worked well. I was especially impressed with replacing the entire cover rather than just the seal gasket. I replaced the gasket alone last year and then it started leaking around the sparkplug well. What's another $150 when labor is involved. Thanks so much.

@omarmorales6437 2 жыл бұрын

With the 06 4 cylinder it’s literally tapped into order when you lay it across the cover. I don’t see how you could possibly clip the wrong connections.

@daltropical5236 2 ай бұрын

Great vid....quick question...the rtv silicone you put in corners before putting new valve cover box back in, is that just a general all purpose rtv or a particular one? Thanks in advance

@williambialkoski1587 2 жыл бұрын

Thanks, your video turned a frightening job into a simple, 1 hour fix.

@1AAuto 2 жыл бұрын

+william bialkoski Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c

@goodnightvids 2 жыл бұрын

I ordered a gasket oem from Nissan but the one that came with the new valve cover I ordered looks and feels stiffer and better quality. The Nissan OEM one looks good also but feels more soft and stretchy. Should I stick to the stiff one or to the soft one?

@laughatdawn 4 жыл бұрын

Thank so much for this video!! Extremely helpful. We used it to do the job ourselves, only issue is that the mouth of the pcv hose broke, and the clamp won't go up to it's original spot when we place it on the valve. Is the only fix to replace the hose? And if so, do you have a video of how to do that?

@1AAuto 4 жыл бұрын

+SunnyDays If the end of the hose broke you may need to replace it. Thanks for checking us out! 1AAuto.com

@MrSparkymike1 4 жыл бұрын

DeNatured Alcohol works wonders at removing/dissolving silicone adhesives, evaporates fast! It can damage some plastics and rubber so be careful to use it primarily on metal surfaces.

@roehee1234 4 жыл бұрын

I spray cologne on the fingertip of my work gloves when I need something shiny lol

@yamarhabawahalla3237 Жыл бұрын

Very nice job very good video talented people like you very helpful to others

@nodieza 4 жыл бұрын

Thak you so much. I can only imagine how much money you saved me with this video.

@1AAuto 4 жыл бұрын

+Ryan Secrets Thanks for checking us out! 1AAuto.com

@ProphetsAmongUs 3 жыл бұрын

how many "foot pounds" to set my torque wrench to for the bolts of the valve cover it can all be confusing?

@1AAuto 3 жыл бұрын

+Prophets Among Us Thanks for watching! If you use a torque wrench you will need a wrench that can be set to inch pounds, not foot pounds. We just do this by feel, as it is a plastic cover on an aluminum head, so it can be cracked if you tighten it too much.

@CORONAKAIZOKU1 5 жыл бұрын

Question why do the bolts holding in the valve cover have to be removed in a certain order?

@josefranciscojuarezmora6950 5 жыл бұрын

CORONAKAIZOKU1 I ask the same question

@devonwiebe4071 4 жыл бұрын

They don’t.

@pm7791 4 жыл бұрын

If you're replacing the gasket itself and your valve cover is fine. You would want to follow that sequence to not mess up the plastic threading

@roehee1234 4 жыл бұрын

During removal it's for setting of the threads and for replacement it's to prevent improper squishing and expanding of the gasket when putting it together apparently

@ricebike 4 жыл бұрын

well if you're experiencing oil in the spark plug wells, removing the bolts in a certain order is not neccessary. installing them is more important since it's a new cover/gasket & would want to ensure even force on the new rubber gasket

@yeongfoo7066 4 жыл бұрын

Excellent. Clear and concise.

@roadstar499 2 жыл бұрын

Is it a common issue for these to leak after 15 plus years and over 100k miles... i have a 2005... cleaned and looked for leaks everywhere under the car ,could not find source... today i will check valve cover... currently i use a quart every 700 miles and gets oil drips spots on my driveway... thanks for sharing...

@camarorob124 5 жыл бұрын

Oil leaked into the cylinders when I removed the spark plugs what should I do? I'm replacing my valve cover gasket and boots but is there anything else?

@finaljesus 4 жыл бұрын

Thank you for this video I have that common problem with the oil leaking into chamber #4 of the spark plug only that one I have all of the parts to replace it but I’m still not confident enough to do it myself I’m goin to watch this video over and over until I get it down

@1AAuto 4 жыл бұрын

+finaljesus Thanks for checking us out!

@AFatherToTheFatherless 3 жыл бұрын

Did you just replace the gasket or the whole cover

@dannyzamudio1252 2 жыл бұрын

@@1AAuto is this the same proccedure for 2011 nissan altima l4 2.5?

@otm777 3 жыл бұрын

MUCH easier than the replacing on G35 and all its wire harnesses

@shermstevens2540 4 жыл бұрын

Great video as always. LOL Intro music sounds like Michael Jackson's "Beat It"

@danahanlon5909 2 жыл бұрын

I did this job on my 2005 nissan altima 2.5 .I bought the valve cover from advance auto . When I went to put the valve cover on. I couldn't understand why it was rocking on the spark plug tubes.I was afraid something was wrong and brought the cover back and asked why does it seem the holes where the tubes line up seemed way to small.But the said put a little grease on them.I still swear something was wrong because of having to screw the cover down.I was afraid it was gonna push the new gaskets out ,it was so tight fitting .any comments

@itzdarian06 2 жыл бұрын

in theory couldnt you remove the need for spark plug tube seals just by raising the tubes of the spark plugs higher to prevent oil from ever being able to get in? definitely would save a lot of money

@abdulbeany1894 11 ай бұрын

Hi can i spray brake cleaner around cylinder to clean oil marks off thanks

@TK-ff5kc 4 жыл бұрын

If you are replacing the valve cover does it really even matter what order you remove the bolts?

@steved2667 3 жыл бұрын

Yes!

@nicholkid 2 жыл бұрын

This doesn't look too hard actually, would probably try it... But I don't have a garage and working outside with an open engine seems risky

@trm4life 2 жыл бұрын

About to do this on my SE-R and I was wondering if it needed sealant on any portion. Good to know. Thank you!

@mattvs117 Жыл бұрын

Any luck on this? I see this was 4 months ago. Anything different than the vid above? I have a 06 SE-R SpecV and fixing to do the same process. . .

@legent4k614 4 жыл бұрын

Thank you for being very informative.

@1AAuto 4 жыл бұрын

+Twitch_ LeGent Thanks for checking us out. 1AAuto.com

@brynthomas193 6 жыл бұрын

hi this is a really good video, just wondering if you have a video like this on how to replace a head gasket thanks!

@1AAuto 6 жыл бұрын

+Bryn Thomas We currently do not have an auto repair video that covers this particular repair. We will keep this request in mind in the event that we need to make this repair in the future. 1aauto.com

@superduperboyx 6 жыл бұрын

Yeah! That'd be great if you have that! I had a blown head gasket on my altima recently.. wished there were good detail videos to show how to replace it!!

@kaleidoscope8743 5 жыл бұрын

on an altima or on a honda accord.

@JohnyBoy512 5 жыл бұрын

Yes do a head gasket video ! Please and thank you

@robsorgdrager8477 4 жыл бұрын

Are the spark plugs tube seals serviceable? I am a mechanic/tech but I can't remember if I've ever had to replace the entire cam cover for those seals. I'm trying to do my good deed for the year right away😎. This the fun part about working at a Volvo dealer , Nissan parts typically are wrong😐 Also are the tubes known to leak like the old Mitsubishi / Dodge engines and can I service the tubes. Like I said before my Volvo parts guys ain't up on their Nissan.

@roehee1234 4 жыл бұрын

No it's kinda silly but you have to replace the entire valve cover panel thing because they put the seals in between two layers that you can't get at but you can order the panel for 80$

@roehee1234 4 жыл бұрын

Could probably rig up something to fit though lol

@rimofheaven 6 жыл бұрын

in changing the oil in my altima I see a grey paste in the chamber. What does this mean? I'm not seeing the same paste in on the dip stick.

@Moodboard39 Жыл бұрын

Have 2006 S bolts are different , what wrench too use

@brianfarrellf3294 Жыл бұрын

I have a 05 which is why I'm confused casue on the 05 you have to remove motor mount

@RocketLeon45 Жыл бұрын

that sucks for me, i just bought a valve cover gasket and now it doesn't stay in the valve cover.... i shoulda bought the whole set 'cause it looks like your stuff is higher quality

@eddiemoreno2922 Жыл бұрын

I'm replacing mine, but on my torque wrench it doesn't say inch pounds it says foot pounds on one side and Nm on the other what would be the conversion # in foot pounds, I don't want to break the bolts or under tightening them.

@ggonzalez435 6 жыл бұрын

Big help. Thanks

@isDogg96 3 жыл бұрын

Two of my spark plug wells have oil inside of them. Could it be a gasket issue? I haven’t gotten any misfires. I was doing a routine spark plug change

@nicksmith1155 2 жыл бұрын

Would this fit an 05 nissan sentera

@cliffhymen 4 жыл бұрын

What are your thoughts on putting Rtv in the cover groove before putting the rubber gasket in?

@cliffhymen 4 жыл бұрын

Is it possible to remove the cylinders that contain the spark plugs or are they welded into the valve train?

@markmcsharry5658 Жыл бұрын

Is it same as the 2.5 xtrail engine 👍

@dipwadz 3 жыл бұрын

I noticed on the link for the valve cover, the baffle is held on by melted down dowels, the one you have in the video doesn't have them. Which one would I get if I ordered through A1?

@1AAuto 3 жыл бұрын

+dipwadz Thanks for watching! The one in the link will be correct for the vehicle shown in this video. There might be some design differences between the two, but it will not affect fit or function.

@joetrujillo6868 3 жыл бұрын

Thank you

@camille8947 5 жыл бұрын

My first cylinder is misfiring and when I changed the spark plugs I noticed a lot of fresh oil around the first plug. Will doing this valve change help with that oil that's INSIDE where the spark plug thread is? Or do I likely have a bigger issue?

@camille8947 5 жыл бұрын

Also, do you know if I'd have to empty the cylinder of oil first? After replacing the valve?

@DancingAmongZombiess 4 жыл бұрын

Hey, how did you end up resolving this issue? I'm having the same problem right now

@ricebike 4 жыл бұрын

that valve cover seal/gasket is the most prevalent cause. just make sure the person replacing it puts silicone on that area as shown. possibly get an OEM cover too since some aftermarket nissan covers are a hit/miss on this & may have to do the job twice if the replacement aftermarket is also bad/poorly made

@ricebike 4 жыл бұрын

@@camille8947 you can cram some paper towels down the hole to absorb it

@roadstar499 2 жыл бұрын

was the factory cover plastic also???thx

@alexissaldierna2955 4 жыл бұрын

Where can i buy the bolts for the valve cover

@1AAuto 4 жыл бұрын

+alexis saldierna Try searching eBay Motors. Thanks for checking us out!

@devonwiebe4071 4 жыл бұрын

You don’t need to tighten those valve cover bolts with a torque wrench, all you do is tighten them until the sleeve on the bolt bottoms out on the mating surface of the head.

@ricebike 4 жыл бұрын

well, that's the torque specs from the Factory Service Manual. but the main thing is to do it in a criss cross fashion to evenly tension that gasket to the cylinder head

@Dasherrrrrr 6 жыл бұрын

Recently did this to my vehicle and it still stutters the same with no check engine light also checked if it leaked again and no leak

@CORONAKAIZOKU1 5 жыл бұрын

TheChampEdgar have you tried changing spark plugs and ignition coils?

@ricebike 4 жыл бұрын

any OBDII codes? how was the visual inspection of the coils? new spark plugs?

@Tngoz Жыл бұрын

How much for the new cover itself? I own a 2008 Altima 2.5

@orlandocruz9473 5 жыл бұрын

Shouldn't be no right way to take it out long as you take it out I did it and car runs perfectly fine again

@papasmurf5888 5 жыл бұрын

Could this solve a heavy smoke coming from muffler??

@123vandle123 4 жыл бұрын

Papa Smurf yes, my car was smoking heavily because there was oil filling my spark plug cylinder. Once I cleared out the oil. It was good to go

@justmake6601 2 жыл бұрын

Are the spark hole seals removable. I have a 2005 altima 2.5 sl

@anthonyraylujan2083 2 жыл бұрын

What’s the labor on this kind of replacement??

@adventuresofperseus945 4 жыл бұрын

The new valve cover I put on my moms I started putting in the bolts that hold in the sparkplug coils but they started to come out. Its the little gold looking things inside the valve cover.I tried pushed them and lightly tap them in but would go in.hope I made Sence. Any help on this would be great.

@roehee1234 4 жыл бұрын

It's possible the coil boots aren't seated all the way down, it should feel like a suction sort of other than that, disassemble and glue those bolts in lol

@alexrdh3591 4 жыл бұрын

“I broke the deal there the spark plug was so I’m just changing the whole cover” lol

@BrandorVideos 3 жыл бұрын

The spark plug tube seals can't be serviced regularly by themselves. It's very recommended to just change the whole valve cover

@josephv5170 4 жыл бұрын

I have a 2009 Rogue. Does this video the same and whats the part number for a valve cover? thanks

@Azjrod 6 жыл бұрын

Can u do this job when the car is hot or do u have to let it cool down first?

@1AAuto 6 жыл бұрын

+jay mac You should let the vehicle cool down first. 1aauto.com

@ricebike 4 жыл бұрын

cool = better so you won't strip those valve cover bolts on soft aluminum head threads

@ricebike 4 жыл бұрын

did they fix / updated the problems with aftermarket plastic valve covers? i'm seeing the Dorman and similar failures of made in China ones all over youtube

@YeetxBoi 3 жыл бұрын

Any of them made after 2015 by Dorman are fixed

@Joseph1213 5 жыл бұрын

What kinda bolts are on the valve cover ? 3 of mine snapped and I’m having a hard time finding them online

@davidm3210 5 жыл бұрын

I use Nissan Parts Deal for hardware

@xart23x 5 жыл бұрын

Go to Nissan dealer. Only way to replace them.

@franciscolopezsanchez1857 5 жыл бұрын

Joe Guzman did you en up finding the bolts ?

@JohnBlatt71 5 жыл бұрын

Music needs more cowbell

@cutesubliminals2226 3 жыл бұрын

reminds me of that SNL blue öyster cult skit, nice!

@queerdor 4 жыл бұрын

Is the cover needed?

@cliffhymen 4 жыл бұрын

I just ordered this part. Please tell me what type of RTV to buy. Thank you so much!!!

@1AAuto 4 жыл бұрын

+MDA Thanks for watching! Any high-heat RTV should do the job.

@YeetxBoi 3 жыл бұрын

Oil resistant is preferred, usually a black rtv

@tracelistener 3 жыл бұрын

Permatex Ultra Grey is recommended by Nissan.

@EvolKnives 3 жыл бұрын

Does the valve cover actually come with a gasket or do i have to order it separately, because I see no image of a gasket in the valve cover on your website

@EvolKnives 3 жыл бұрын

update for anyone doing this: the valve cover DOES come with a gasket. It does not show it in the photos on their website, but it is already on the cover when it arrives.

@RD-Man 2 жыл бұрын

Does anyone know how to access the fuel rail on this car model? Do I have to remove the valve cover to do it?

@SeanA88 4 жыл бұрын

Do you need to let the rtv sealant sit or can you apply it and put the valve cover right on?

@YeetxBoi 3 жыл бұрын

You put it on immediately, it will set in about 20mins to an hour and be ready to drive in 24hrs with most rtv, you'll want a black/oil resistant type and there is the 90 minutes type and the regular 24 hour cure time type.

@JohnnyJr396 3 жыл бұрын

So the tubes for the coil pacs and spark plug . One of mine has engine oil in the well/tube . Will this kit have the seals to fix that?

@bailon718 3 жыл бұрын

Yes the gasket seals come included

@isDogg96 3 жыл бұрын

Two of my spark plug wells have oil inside of them. Could it be a gasket issue? I haven’t gotten any misfires. I was doing a routine spark plug change.

@jonathan9607 7 ай бұрын

😭😭😭😭 its been 2 hours THE COVER AINT COMEIN OFF

@kinglangren 3 жыл бұрын

So did you rtv the entire surface or just the ends

@YeetxBoi 3 жыл бұрын

Just the ends where he showed, as per the factory service information.

@CTaylor7013 6 жыл бұрын

Im about to do this to my Altima, After putting the silicone on, should I also run a bead of permatex/gasket sealent on the block surface before putting the new cover on???

@CTaylor7013 6 жыл бұрын

*on the rest of the block surface

@ricebike 4 жыл бұрын

i've seen others do that, but it's not necessary . the proper tightening sequence , in 2 stages, is more important to evenly distribute the rubber seal on the cylinder head. plus too much of that stuff may squeeze into the oil passages and clog the system

@queerdor 4 жыл бұрын

How do you know this needs to be done? I have one and i think this is the issue but im not sure

@1AAuto 4 жыл бұрын

+Mr. Ray We recommend having your vehicle diagnosed. Thanks for checking us out!

@truthfound8574 4 жыл бұрын

This engine is a pain when is over heating

@damianwilliams1423 6 жыл бұрын

Can you do one on a 07 Altima v6

@1AAuto 6 жыл бұрын

+Damian Williams We currently do not have an auto repair video that covers this particular repair. We will keep this request in mind in the event that we need to make this repair in the future. 1aauto.com

@FauxShelby 5 жыл бұрын

Can the cover be removed without first removing the coils? My coil bolts are stripped.

@ricebike 4 жыл бұрын

maybe... but you'll need those bolts to secure the coil to the new replacement cover

@mckoylach1622 6 жыл бұрын

So the valve cover grommets are not replaceable or serviceable,that’s why you are replacing whole valve cover?

@1AAuto 6 жыл бұрын

+mckoy lach That is correct, those seals are not replaceable. There could be other reasons for replacement, like the cover itself is cracked etc. 1aauto.com

@dannyv1948 6 жыл бұрын

yea

@narutointel 3 жыл бұрын

👍

@1AAuto 3 жыл бұрын

+Vickz gaming Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

@narutointel 3 жыл бұрын

@@1AAuto thank you. i order the parts from you guys and I watched the video and I took the courage to replace the valve cover my self. I just finished replacing everything and now my car works fine. Thank you again. Keep up the good work .

@SKott1213 3 жыл бұрын

You guys always make these videos so easy to follow and I’m so grateful. Would this process be the same on an 05 Altima 3.5L 6 cylinder?

@kaleidoscope8743 5 жыл бұрын

For a DIY-Daddy's girl, could you clarify. 1) It appears you did not remove the spark plugs? 2) Guys at work say put dab of dielectric grease on boot to prevent boot from seizing to the plug tip? Is this a good idea only if I change a coil or plug, or good idea regardless? 3) And lastly does that "decorative" engine cover serve a vital purpose in protecting anything or does it trap heat around the coils and wiring? it seems like a barrier that prevents me from keeping an eye on the engine seals.

@1AAuto 5 жыл бұрын

+Kaleido Scope The engine cover would be best to prevent rusting.

@ricebike 4 жыл бұрын

1) guess that's a separate video, but if it's over 100,000 to 105,000 miles on the original, i'd definitely replace them with NGK platinum or iridium plugs 2) yes that's a good idea! 3) it's a "beauty cover" not to prevent rusting at all (you got a hood to keep most of the rain/snow out!)

@kaleidoscope8743 3 жыл бұрын

@@1AAuto I bought my replacement valve cover from you (1A Auto ) 2 yrs ago (2006 Nissan Altima 2.5 l 4cyl. ). Since I had one arm in cast [out of commission], I took my cover and gasket (with its integrated O-rings ) to a mechanic and he replaced it. Reasonable price. Last week my car sputtered and and almost stalled out. This week crank/ no start. P0302 I bought new plugs and in processing of changing them, I found oil in 1 and 4 wells , and the integrated rings were cracked and literally chipping and crumbling chunks on the 1 & 4 seals!! This cover is 2 years old! Manufacturer or mechanic?

@boxnation1338 5 жыл бұрын

Great video. Exactly what rtv silicon type was it or does it even matter? I see a red paste gasket maker.

@zosorob4559 4 жыл бұрын

7:39 Wait wait wait so we only add the rtv silicone to the LEFT side and then put the cover on? Or did he just not show him putting it on the rest..

@DrEaMzZz868 4 жыл бұрын

I'm guessing it's just for that specific engine but the same gunk he scraped off using the razor blade you should see it on your engine also so that's where you would need to put it...

@roehee1234 4 жыл бұрын

It's because it's not raised up on the other side apparently, it's flat and seals tight

@chrisElearning 6 жыл бұрын

Same engine as Nissan X-Trail? Looks almost the same. Edit. Just looked it up. VR25DE. Same. Here in Australia it's quoted as being 2.4 not 2.5 which is odd but anyway. Also noted in Japan the X-Trail came out as a GT edition with the SR20VET turbo engine. Nice. lol

@YeetxBoi 3 жыл бұрын

This motor is actually the qr25de

@JM-ic1sf 5 жыл бұрын

Having white smoke coming out, burning oil says my valve needs replace but no one will do it. I live in Woodbridge nj. Anyone can help

@ricebike 4 жыл бұрын

check the cover/ pcv first... they're the easier cheaper route to go. but also may want to use OEM cover as this part shown as well as Dorman covers may still show signs of burning / using up oil. google or youtube other videos to confirm

@YeetxBoi 3 жыл бұрын

@@ricebike Any Dorman valve cover MADE after 2015 were redesigned with a fixed design. Gotta look at the top of the cover to see the manufacture year

@cindymerkley5758 4 жыл бұрын

My estimate of labor time, also on u tube was 1to 5 hrs it took you less than 15 mins what's up with the extreme time differrnce??? Thank you for the vid it's great

@1AAuto 4 жыл бұрын

+Cindy Merkley Thanks for checking us out. 1AAuto.com

@ricebike 4 жыл бұрын

where did you get 5 hours for a valve cover gasket, from the stealership ???

@Libraquemini 5 жыл бұрын

So do the tube seals come with the new valve cover?

@ricebike 4 жыл бұрын

yes, those tube seals aren't "serviceable" that's why most people will have to change the whole plastic cover when oil is found in the spark plug wells