How to replace washing machine motor carbon brushes C.E.SET Hotpoint, Indesit, Scholtes & Ariston

Рет қаралды 67,530

10 жыл бұрын

Get your appliance fixed faster! Click the link below to browse our supplier's huge selection of appliance parts and support the channel at the same time! (repairpartsteam.co.uk/index?r...)
Tutorial: www.how-to-repair.com/help/re...
How to replace washing machine motor carbon brushes C.E.SET Hotpoint, Indesit, Scholtes & Ariston ETC
If your Hotpoint, Indesit, Scholtes or Ariston is not spinning then this video will help you.
Please remember to subscribe to our channel
kzfaq.info?...
Remember to Shop with www.how-to-repair.com and it would help us by posting the video or the website on your timeline. This helps us a lot and if we really helped you can always buy us a beer how-to-repair.com/help/buy-pau...
Please remember to mark us to your favourites also I would be grateful if you would subscribe to our channels social media as this really helps my site and keeps us going.
KZfaq. / apart4u
Facebook. / how.to.repair.appliances

Пікірлер: 58

@DJMarky1987 7 ай бұрын

Thanks for the assistance with this video! Thats my washer dryer back to full working order for a mere £15 from the local appliance repair centre :)

@user-pt3mo2ee4g 7 ай бұрын

Very helpful and detailed information video. I replace my indesit washing machine carbon brush my self it cost only 17 euro. Save money

@tinawells613 7 ай бұрын

Fab video, my machine is working again, turns out one of the brushes just got stuck! saved me £100's.

@gla76 8 жыл бұрын

Thanks to this video of yours I was able to replace the motor carbon brushes and thus fix my 2008 Ariston ARS68 washing machine all by myself! I just donated 5 pounds but as a matter of fact you're priceless!

@zubairmulla464 5 жыл бұрын

Thank you so much for this video. The step by step instructions were very clear to follow. The slight differences I encountered on my Hotpoint washing machine are that the motor is Nidec brand, the carbon brushes were PA66-GF and they were held in by 5.5mm hex head screws (which was annoying, as I had to order a 5.5mm socket). I ordered the carbon brushes from your eBay store and they arrived within 2 days. I can't explain how happy I am that the machine is working again. Thanks again.

@flapjac4155 Жыл бұрын

Thanks. We are halfway through this and doing great. We had a bit of problem removing the motor plug and had to push in some little plastic parts to get it to unclip.otherwise all good.

@stinstan747 8 жыл бұрын

Minus the cost of new carbon brushes, you have saved my family well over two hundred quid! We have this exact same washing machine, and this video has been an absolute godsend! Thanks very much!

@How-to-repair 8 жыл бұрын

I am glad I could help you with this problem. Please remember to subscribe to our channel kzfaq.info Remember to Shop with www.how-to-repair.com and it would help us by posting the video or website on your timeline. This helps us a lot and if we really helped you can always buy us a beer how-to-repair.com/help/buy-paul-a-beer/ Please remember to mark us to your favourites also I would be grateful if you would subscribe to our channels social media as this really helps my site and keeps us going. KZfaq. kzfaq.info Facebook. facebook.com/how.to.repair.appliances

@pauldunne4585 5 жыл бұрын

Genius video, especially showing the noise of the older brushes, that was the clincher for me after watcing 8 videos, thansk so much!

@kingasz100 5 жыл бұрын

I followed the video thinking I will just check if the belt is on and if the motor is moving......I got a bit carried away and before I knew it I had the motor in my hand. I had a look at the carbon brushes, they were very worn. I assembled it again and it's seems like our old HOTPOINT is turning again. I just ordered a pair of new carbon brushes form your website PAUL! My father - mechanical engineer - would be very proud, indeed, but to be honest after seeing this video it was easy......The biggest challenge was to find the right tools in my husband`s workshop and to figure out how to put THEM together and how they actually work...(before you comment - they are NO ORDINARY screwdrivers. I have my own set of thoses, unfortunately, they were not enough for the job....).

@pamburrows5839 8 жыл бұрын

Excellent demonstration on how to fit new carbon brushes on Hotpoint washer/dryer

@How-to-repair 8 жыл бұрын

@AslamYusof 8 жыл бұрын

Thanks very much. I think this is the solution to my problem. Really appreciate it!! Now I can start working

@Maxxxshop 10 жыл бұрын

This video is so relaxing. Yesterday I replaced a capacitor on my Indesit. Unfortunately my carbon brushes are doing their job properly. Yet! I hope they'll break soon. :-) thx and greetings from Germany

@Ronnie1001 4 жыл бұрын

This is a great video! I took the motor out to discover what type it was, to be able to order the correct brushes, then I found that if you take the plastic case off the brush there are two little brush-retaining tabs in the brass tube. If you bend them away then the carbon comes out an extra millimetre or two, which means you can reassemble the motor with the old brushes and get a load more washing done whilst waiting for the new brushes to arrive and a convenient time to fit them.

@How-to-repair 4 жыл бұрын

but if you damage amarture then motor nackerd. Iam Glad we could help you. If you ever need help please use our site for 24 hour response www.how-to-repair.com/help/contact-us/ If have a question please use our site for 24 hour response www.how-to-repair.com/help/contact-us/ Please remember to subscribe to our channel kzfaq.info Remember to Shop with www.how-to-repair.com and it would help us by posting the video or website on your timeline. This helps us a lot and if we really helped you can always buy us a beer how-to-repair.com/help/buy-paul-a-beer/ Please remember to mark us to your favourites also I would be grateful if you would subscribe to our channels social media as this really helps my site and keeps us going. KZfaq. kzfaq.info Facebook. facebook.com/how.to.repair.appliances

@sanlu297gamers4 5 ай бұрын

Soy de Argentina, no se ingles, pero esta tan bien hecho el video mostrando cada paso a seguir desde el inico de sacar la tapa, etc, que entendi todo re bien, lo voy a hacer, muchas gracias 👌

@rossemans8996 6 жыл бұрын

Excellent video - much better than others I'd seen on the same subject. Very clear explanations and really good tips for someone who has never done this job before e.g. on getting the lid off and taking off and replacing the belt. Thanks to this video I got the motor off our Hotpoint Wf740 which had stopped spinning. Getting the brushes off the motor on our machine needed a socket size which I didn't have (rather than a screwdriver), so I took the whole motor to a friendly and helpful local appliance repairer and dealer, who took the old worn brushes out, cleaned the armature and then replaced the brushes. Once the motor was back in the machine, the machine was back to normal. Total cost: less than £17. This video saved me a load of money. Thanks very much! I have subscribed to your channel.

@stephensnell1379 5 жыл бұрын

Actually it was a waste of time you watching the video if you never changed them yourself! Total waste of time.

@sickboy123uk 6 жыл бұрын

Great video guide, you sir have saved me a lot of money.

@farnthboy 7 жыл бұрын

Great video. New brushes fixed our "DOOR" lock problem. Thanks for posting.

@How-to-repair 7 жыл бұрын

I am glad I could help you with this problem.Please remember to subscribe to our channel kzfaq.info Remember to Shop with www.how-to-repair.com and it would help us by posting the video or website on your timeline. This helps us a lot and if we really helped you can always buy us a beer how-to-repair.com/help/buy-paul-a-beer/ Please remember to mark us to your favourites also I would be grateful if you would subscribe to our channels social media as this really helps my site and keeps us going.KZfaq. kzfaq.info Facebook. facebook.com/how.to.repair.appliances

@farnthboy 3 жыл бұрын

Just as a adjunct 4 years later had to replace the brushes again. Interestingly it was also 4 years from when we bought the machine in 2013 I had to replace the 1st set of brushes which was 2017. Machine now on its 3rd set of brushes but still going fine.

@GThu1 2 жыл бұрын

Very professional video! Thank you.

@DesignRec 10 жыл бұрын

thanks for this when i heard i needed to replace a carbon brush i was like what the hell... this video made me realise its very simple :)

@aikfakeer3847 2 жыл бұрын

THANKS Life saver or rather washing machine saver video bless you 👍😊

@jfish2970 7 жыл бұрын

Thank you for ur good and lovely information bro

@paul1967a 3 жыл бұрын

Excellent video, I shall buy parts from your eBay in future. Thanks

@ribamarsantarosa4465 Жыл бұрын

many thanks, thanks to your video I realized that I couldn't get my belt in place, this technique to put it back works like a charm!

@How-to-repair Жыл бұрын

Really glad you found it helpful. Please remember to subscribe to the channel as that really helps us. glad we could help you Ribamar Santarosa this is for you kzfaq.infoe432SAb2g08 please remember to subscribe as that's what keeps this channel going. Thanks 👍

@tatenda.mawoneke2864 6 жыл бұрын

Your video helped me fix my moms washing machine. Many thanks, keep doing what you do good Sir.

@mrbackinblack73 7 жыл бұрын

brushes ordered cant wait to fix it and watch it spin

@BensWorkshop 3 жыл бұрын

Many thanks. A couple of questions if I may. 1. Why did you remove the retaining plastic tab before fitting the brush rather than afterwards as that would stop having pressure on the brish as you are aligning it? 2. Was it necessary to remove the motor (other than for making it easier to see on the video) as opposed to laying the washing machine on its side and changing the brushes in situ?

@jaicruvoir 10 жыл бұрын

Thanks Fron France

@johno4521 Жыл бұрын

I just tipped my washer on its side, brushes accessible from underneath. Didn't have to take the motor off 10 minute job

@How-to-repair Жыл бұрын

Thank you For leaving a comment this is for you kzfaq.infoe432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍

@BatXDude 8 жыл бұрын

Would the burning out of one of these cause sooty black deposits on the back plate/spider/belt of my hotpoint? Would it also smell like burning/burning rubber after a load?

@devkamal7705 5 жыл бұрын

thank you do you have IFB senator 400-1100 repair manual. I have same issue after (2001-2018) 18 year old machine. it sparked a lot. and now not working.

@frankalexander6629 Жыл бұрын

An excellent video that shows the amateur exactly what to look for and what to do. I have a John Lewis JLBIWM1403 but can’t find any info on it, can you tell please which company produces the machines for them. Kindest regards, Frank

@How-to-repair Жыл бұрын

JLBIWM1403 914528148 00 20151120 JOHN LEWIS 2017-12-11 Factory ZP - ZANUSSI S.P.A., PORCIA FACTORY if you contact me through the website I might be able to get you the workshop manual Thank you for leaving a comment, I would love you to leave your opinion on our poll about manufactures building in obsolescence to appliances. kzfaq.infoUgkxygHomnUySd_bYjaJBdEHPO6T4dYo9Ahm and this is for you kzfaq.infoe432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍

@faisalaus 6 жыл бұрын

hy I just saw your video . I have ariston washine machine looks similar to the one you have in video . when I press start button it give me door sign and make few clicks . but it doesn't start at all .. do you have any idea wt the problem will be . I would appreciate your help .. thank you

@aladarbunak 9 жыл бұрын

Thanks a lot from Czech Rep. What kind of beer Paul likes? :-)

@How-to-repair 9 жыл бұрын

i use to love the bud výčepní but its been many years since i drank your very cheap beer in the 1990's what a great city you have

@stuartallcock3516 7 жыл бұрын

done everything you said my motor won't pull off at all..it's stuck

@tomtandog5024 4 жыл бұрын

how much carbon for ariston pls reply

@tadelkumsa6801 3 жыл бұрын

Hi how can contact you

@tolgaturhan4691 5 жыл бұрын

are carbon brushes expensive

@chrisbalanda9368 5 жыл бұрын

Older machine better more room to move about

@stephensnell1379 5 жыл бұрын

All machines now have many parts that are welded as it mentions in other videos

@victorcruz8089 8 жыл бұрын

come toportugal PAUL I will drink a beer with U

@How-to-repair 8 жыл бұрын

+Victor Cruz This will shock you. I Am already here so waiting for the beer here is our shop in Faro como-reparar.com/contact-us/

@karmaraw5197 9 жыл бұрын

Hiya, my machine stopped working and want to call a repair person... any chance of a quick diagnostic? How much should it cost? kzfaq.info/get/bejne/irSFf6uVm5vOgmg.html

@chrisbalanda9368 5 жыл бұрын

Brushes quiet messy advice old clothes on

@stephensnell5707 Жыл бұрын

You mean quite

@BatXDude 8 жыл бұрын

Would the burning out of one of these cause sooty black deposits on the back plate/spider/belt of my hotpoint? Would it also smell like burning/burning rubber after a load?