How to Replace Water Pump 2012-2020 Ford Focus

Рет қаралды 87,646

2 жыл бұрын

Buy Now!
New Engine Water Pump from 1AAuto.com 1aau.to/ic/1AEWP00091
This video shows you how to install a water pump in your 2012-2020 Ford Focus. The water pump keeps coolant flowing through your engine. Common failures of the water pump will leave the coolant leaking, or stagnant. Both will lead to overheating if left untreated. Install a new engineered to fit water pump from TRQ for total peace of mind.
This process should be similar on the following vehicles:
2011 Ford Fiesta
2012 Ford Fiesta
2013 Ford Fiesta
2014 Ford Fiesta
2015 Ford Fiesta
2016 Ford Fiesta
2017 Ford Fiesta
2018 Ford Fiesta
2019 Ford Fiesta
Tools you will need:
• Flat Blade Screwdriver 1aau.to/oa/1AXAA00013
• 10mm Wrench 1aau.to/oa/1AXAA00010
• 13mm Wrench 1aau.to/oa/1AXAA00010
• 15mm Socket 1aau.to/oa/1AXAA00015
• 18mm Socket 1aau.to/oa/1AXAA00043
• 8mm Socket 1aau.to/oa/1AXAA00017
• Coolant Funnel Set 1aau.to/oa/1AXAA00116
• 1/4 Inch Ratchet 1aau.to/oa/1AXAA00017
• 3/8 Inch Drive Ratchet 1aau.to/oa/1AXAA00015
• Ratchet 1aau.to/oa/1AXAA00016
• Torque Wrench 1aau.to/oa/1AXAA00044
• Block of Wood
• Brake Parts Cleaner
• Floor Jack 1aau.to/oa/1AXAA00068
• Rubber Mallet 1aau.to/oa/1AXAA00413
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Пікірлер: 64

@TRQ 2 жыл бұрын

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

@ytoal Жыл бұрын

Thanks for not editing out things that take longer to remove, show us all what we will face!

@fiily1 2 ай бұрын

Just did this tonight, 10 min. to remove overflow tank, a/c line, motor mount, upper tensioner pulley, support jack engine up ....45m to remove the corroded water pump to the mating surfaces just like in the video. TRQ saves the day once again!

@patrickmclaughlin413 Жыл бұрын

Great video... Thanks... Added tip. I bought a $10 strap wrench to hold the pulley while loosening and tightening bolts. Worked like a charm.

@christopherloewen1433 2 ай бұрын

I'm doing this on a 2012 ford focus and I have the big ac line going right past the engine mount. It definitely makes it a bit harder.

@josephwilliams3834 10 ай бұрын

You have my respect best ever step by step guide I've found after searching on KZfaq for almost a month❤thank you

@suar907 2 жыл бұрын

Great video. Super easy to follow. Keep up the great work TRQ.

@orrbitsgreyfeathercyberbos9072 7 ай бұрын

Real world issues and all, great video, thanks for the lesson on the water pump.

@chewbaca918 Жыл бұрын

Really convenient when you don't have A/C hard lines running over top of the engine mount

@07Review 2 жыл бұрын

Brothers, GOD BLESS YOU!!! Amazingly well done 👏

@Farty_McFly 2 жыл бұрын

Thank you for the very helpful video! Finished mine this afternoon

@dnleimer 2 жыл бұрын

Best water pump video ever.

@jamesbarber4765 Жыл бұрын

Really appreciate it. It's was straight forward and easy to follow. Thank you

@bernathfamily Жыл бұрын

Love the explanation of the torque specs!🙌

@tonyt6301 8 ай бұрын

Did you have to put a jack under the engine when removing the engine mount?

@tylerbrade9242 11 ай бұрын

Absolutely fantastic video, thank you!

@chrisfernandez3329 Ай бұрын

Easy peasy. Most informative video for this job. Completed replacement and drain/fill coolant in 2.5 hours. I was also taking my time too. Thanks!

@TRQ Ай бұрын

+@chrisfernandez3329 Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-TRQ

@hectorocaranza3587 Жыл бұрын

Exelente!!! Saludos!!!

@joeortiz7408 6 ай бұрын

Great Video , thanks for your time and knowledge.

@asakien Жыл бұрын

Realy good bro, i'm mexican and, i didnt speak English well. But your videos are too easy to understanding.

@mohammedshafiq4053 2 жыл бұрын

Very easy good job

@exavierortiz3783 Жыл бұрын

What did you use to clean the engine bag of corrosive material (coolant)?

@segurajosealfredo Жыл бұрын

Thank you!!

@Dhoopstickles 6 ай бұрын

Needed this thanks!

@fairfax_fran5109 Жыл бұрын

This guy is all pro 😮

@Francois_Dupont Ай бұрын

the guy screaming halfway thru : *FORDDDDD!!!!!!*

@fight4blaque529 Жыл бұрын

Wonderful!! One question: What type of 3/8ths impact wrench are you using? I need one! Great video 👏🏾👏🏾👏🏾👏🏾

@denisportarescu9247 Жыл бұрын

Today I was driving ford focus 2012 And an a dashboard was sign motor over heating I stopped an the side of the street and Opened hood a little smoke but coolant everywhere and the passenger side I called towing to tow the car My question is (can be water pump bad ? Thank you for any advice

@SamGTA4 Жыл бұрын

How many inches can I lift the engine? There was a stubborn stripped bolt and was hard to get to.

@lukeyk94 Жыл бұрын

Is it possible to take the wheel off and cover and do it from the side?

@marcelolaglaive8330 Жыл бұрын

hello, excellent tutorial, didn't you need a hydraulic jack to support the engine?

@keithharris4378 5 ай бұрын

Great video

@jameslaiola4976 7 күн бұрын

I just changed the thermostat and im getting ready to change the water pump. I hope this is the reason for my overheating.

@JoseRodriguez-sw6mo 5 ай бұрын

Piece of cake!!😅 Dealership wanted $550 for this job

@rafiqseedat1244 19 күн бұрын

I was watching my mechanic work on my car and he had placed some sort of silicon onto the water pump where the rubber is located. And after two bottles of 1.5 Kool-Aid he mixed it with water, how would you rate this job?

@FULLCLiPiiiiii 2 жыл бұрын

You have to use thread locker ?

@sidology1.0 Жыл бұрын

I wish i could fix it myself

@travion4146 2 ай бұрын

What’s that stuff called you sprayed

@memphis_sean8169 3 ай бұрын

should you change tbe WP before it goes bad 🤔

@howardjordan8838 4 ай бұрын

Overflow tank is different from the original video, is there a reason why you edited the video with a newer ford focus

@frankmontez6853 2 жыл бұрын

Can bad pump failure cause water and oil to mix ? I don't think soo

@spencerbeales8965 Жыл бұрын

@rocknral 2 жыл бұрын

Great video. But how did you get that coolant tank so clean?! ....LOL.

@FULLCLiPiiiiii 2 жыл бұрын

It’s a new one I was like what the heck went from old to a new one. I replaced mine thinking it was the tank leaking and it’s the water pump.

@marcrudolph2753 Жыл бұрын

I took the tensioner off and with 8 inch punch, angled it and with a couple wacks of the hammer, the pump came right out

@NG-tz8wo Жыл бұрын

Keep in mind if you are doing this, there will be AC lines that are not shown in this video that go over the motor mount.

@knowelcarl2063 6 ай бұрын

Can you replace just the o ring instead of the whole water pump?

@DesiAnanth Жыл бұрын

i tried getting one out of a junkyard today and i broke its legs trying to pry it out so corroded into the engine. i think someone ran straight water which welded it on. went to another car and got it out without beating it up too much. i wouldnt pry on the shaft bearing if your resuing. get a screwdriver between those legs and hit that driver with a hammer itll come out

@iforgot3535 5 ай бұрын

What size are the water pump pulley bolts ?

@iforgot3535 5 ай бұрын

13s ?

@dylanmonen9881 8 ай бұрын

Is this the same as 1.0 liter eco boost 3 cylinder???

@TRQ 8 ай бұрын

+dylan monen This procedure might be different for your application. We do not currently have a how-to video for this particular year, make and model. Thank you for asking! 1aau.to/m/Shop-TRQ

@paulhodgkinson275 Жыл бұрын

My 1.5 ecoboost not the same as tensioner not in same place

@robbiemendenhall9381 2 ай бұрын

Thanks so much brother! You saved me a lot of aggravation and experimentation. I just got done putting mine in!

@DonaRae55 Жыл бұрын

Excellent! Of course I lack an engine hoist and a means to get to the underside to drain the radiator. By the way, you opened the radiator drain, took off the expansion tank cap to drain quicker but I didn't see you close the drain. Naturally, the water stayed in the tank so you must have closed the valve. 🙂

@SouthwestSasquatch Жыл бұрын

89 inch pounds = 7.4 foot pounds torque

@leondunn3802 Жыл бұрын

For a second it looked like you forgot a bolt in the water pump trying to pry it out...good video tho

@memphis_sean8169 3 ай бұрын

just get a bigger hammer 😂

@Francois_Dupont Ай бұрын

ford repair video: -first step is to remove the engine

@noneya3504 2 жыл бұрын

Nice video. You did skip the step closing the drain valve on the radiator. Just an oversight I am sure.

@rickyheck6780 Ай бұрын

A lil Vaseline will make it nice to slide in...

@ethanmattos2964 Ай бұрын

DIAPERS NOT PADS

@ariannaplayshouse Жыл бұрын

I can always spot a rookie repair when twice as many parts and time are spent removing a Focus Water pump. Its also a good way to break otherwise good parts. 20 year Master Tech and vocational instructor definitely earn this advantage. Its always the girl.