How to Replace Your Tractor Front Wheel Bearings

Рет қаралды 51,029

3 жыл бұрын

Replacing your tractor front wheel Bearings is not that hard and can be done easily by the tractor owner with no need for an expensive mechanic’s bill.
Follow along and you can replace your own tractor front wheel bearings.
Please support our channel by buying some merchandise here: bundybearsshed.com/
Links to the products used in this video are below.
Left Hand King Pin assembly: queenslandtractorspares.com.a...
Right Hand King Pin Assembly: queenslandtractorspares.com.a...
Front Wheel Bearing Kit for Both Wheels: queenslandtractorspares.com.a...
Front Wheel Bearing Kit Single Side: queenslandtractorspares.com.a...
Front Spindle Castellated Nut: queenslandtractorspares.com.a...
Spindle Washer: queenslandtractorspares.com.a...
Split pin or Cotter Pin: queenslandtractorspares.com.a...
Hello Im Lance (aka Bundy Bear) and doing these videos is my hobby. I do own Queensland Tractor Spares in Australia where I sell parts and offer technical advise to customers.
Parts seen in our videos can be purchased from www.queenslandtractorspares.co...
We have a lot more than we can offer on our web site available to us and in our store. If you dont see what you would like please email info@queenslandtractorspares.com.au and we will help where we can.
I do try and help with technical advise at bundybearsshed@gmail.com if you have a question or are having trouble with your project.

Пікірлер: 62

@johnp1388 3 жыл бұрын

Great Video Lance. These are the sorts of videos that make us constantly view your channel - Good Old Fashioned "Olden' Days Know-How" 👍

@BundyBearsShed 3 жыл бұрын

Glad you enjoyed it, more to come soon hopefully

@promechanics2395 Жыл бұрын

Few manufacturing companies use space here and that is one the great way to set preload or end float because one has nothing to do as everything remains within the predetermined setting.But in conditions like this without spacer great tutorial by the experienced guy.

@BundyBearsShed Жыл бұрын

Thankyou.

@vanityplates_se Жыл бұрын

Thank you so much! Now I feel confident enough to change my rim where the studs spun.

@BundyBearsShed Жыл бұрын

Glad it helped

@billzadow8420 3 жыл бұрын

Good morning from Canada. Nice to see the repair videos again. This proccedue also works on small trailers. Keep up the good work, and i hope you get your rain.

@BundyBearsShed 3 жыл бұрын

Thanks 👍 Yes we need it still.

@michaelhowse9320 3 жыл бұрын

Hi Lance,Have done loads of wheel bearings in my time,But love your videos showing others who My not have done the job before how it’s done correctly.

@BundyBearsShed 3 жыл бұрын

Thanks 👍

@paulbuxton5531 3 жыл бұрын

Thanks Lance, Great video on the wheel bearings. I was taught to pack some grease in the cap also. Cheers, Paul.

@BundyBearsShed 3 жыл бұрын

We did that in my apprenticeship in the shop but the general opinion now is that it doesnt help. But in saying that Im sure it wouldnt cause any harm either.

@charleshart6992 3 жыл бұрын

Excellent video Lance, looking really good!

@BundyBearsShed 3 жыл бұрын

Thank you! Cheers!

@Ckktopa 3 жыл бұрын

Great video thanks Lance

@BundyBearsShed 3 жыл бұрын

Glad you enjoyed it

@Mike-Penny Жыл бұрын

Seen a few comments on the discs used to insert the races. Did mine at the weekend and panicked when I didn't have anything to drive the inner (larger) race home. Not sure if this is by design but the hub-caps worked perfectly - exactly the right size and the threads don't touch the race! Your mileage may vary but it worked for me!

@BundyBearsShed Жыл бұрын

Thanks Mike that is something I never knew. You never stop learning when playing with tractors.

@kt3537 Жыл бұрын

Great video 🤠

@BundyBearsShed Жыл бұрын

Glad you enjoyed

@michaelmurray8683 Жыл бұрын

Thank you Sir for the video.

@BundyBearsShed Жыл бұрын

You are welcome

@LordIronFoot 3 жыл бұрын

Well this just made my day! :D

@BundyBearsShed 3 жыл бұрын

That was easy then, lol.

@billnaha15 6 ай бұрын

Thank You! Excellent

@BundyBearsShed 6 ай бұрын

You are welcome!

@giemme4492 3 жыл бұрын

great, thanks for uploading

@BundyBearsShed 3 жыл бұрын

You're welcome

@jesusmorales1467 Жыл бұрын

...nice...nice..video .. un excelente video gracias por compartirlo

@BundyBearsShed Жыл бұрын

Thankyou.

@daveklooster4905 3 жыл бұрын

I have a bearing packer with which you use a grease gun to pack the bearings, but I find it's much quicker and easier to pack them by hand, as you did. Often times the old way is the best way.

@BundyBearsShed 3 жыл бұрын

I could not ever get on well with those so the hand it is.

@AaronEngineering 3 жыл бұрын

Nice work Lance. You don’t feel like coming to Melbourne and doing a water pump change out in a Mazda CX-5 for me 😂

@BundyBearsShed 3 жыл бұрын

No way!, lol .

@mikeparr8736 2 жыл бұрын

I watched this then went out and stripped the hubs off to inspect the bearings and adjust the slack, these videos take out the worry of tackling a job you've never done before with a degree of confidence, thanks Lance. one thing I found were my bearings remained in the hub when i removed it, is the normal yours seem to have separated when you pulled the hub from the king pin?

@BundyBearsShed 2 жыл бұрын

Yes at times they stay, thats not a problem.

@MrRandyj72 3 жыл бұрын

I'd love to see you pop that whole spindle assembly and show us how to fix one and take out all that slop

@BundyBearsShed 3 жыл бұрын

Video there very soon, probably today.

@MrRandyj72 3 жыл бұрын

@@BundyBearsShed sir you are the man!!!!!! I was reading how to do it and all the talk about hone'n the bushings to perfect the fit..... I was like I just need to see it done

@amatoratolye7541 2 жыл бұрын

Thank you for video. I will replace bearings on my Leyland 154.

@BundyBearsShed 2 жыл бұрын

Glad to help

@derricksmiley8293 2 жыл бұрын

@@BundyBearsShed i have a 2005 terrimite t5c do u think it will work on it

@nickrowntree1 3 жыл бұрын

Great video Lance - thanks for putting it together. Where did you get your 49mm and 62mm metal cups from? Can't find them anywhere in the UK! Cheers

@BundyBearsShed 3 жыл бұрын

They are a kit from E Bay

@nickrowntree1 3 жыл бұрын

@@BundyBearsShed Cheers Lance. Any idea what I should be searching for?

@nickrowntree1 3 жыл бұрын

Found them - I searched for 'bearing race driver kit'

@vincemarinaccio247 Жыл бұрын

Another great video Lance! So where do you find these punch disks. Not sure if that’s what they’re called but I sure could use a set.

@BundyBearsShed Жыл бұрын

They are just a cheap set from either E bay or Amazon, I have seen them in both places.

@chrisgreig5628 3 жыл бұрын

First , thanks

@BundyBearsShed 3 жыл бұрын

Well done

@promechanics2395 Жыл бұрын

What is its end float setting by manufacturer?

@BundyBearsShed Жыл бұрын

They just give a torque on the nut, so no end float or a torque wouldnt be possible.

@tommyrooney8954 4 ай бұрын

Do you fill that hub with oil

@BundyBearsShed 4 ай бұрын

A bit of grease not oil nowadays.

@seanoconnor1586 2 жыл бұрын

What tractor is this wheel bearing off

@BundyBearsShed 2 жыл бұрын

Probably TEA20 from

@garytaylor8601 3 жыл бұрын

Do u ever work at Toyota amazon 2004 4.2 I am in county Antrim n ireland gary taylor the name a wee video in repair wood help

@BundyBearsShed 3 жыл бұрын

No That is not a model we have here but a lot of the earlier vehicles are the similar process to this

@bigun447 3 жыл бұрын

You did not say if that was the driver's side or the passenger side. (laugh, laugh, nudge, nudge)

@BundyBearsShed 3 жыл бұрын

Im that handy I did both. lol.