Thanks for this. Your vids are my 'go to' when it is time to fix one of the old tractors. Clear and well made presentations every time. Best regards from Eastern Canada

Spot on video, Bundy. Thanks very much. Not only did this really help be get the fix done, but diagnosing the mysterious loss of fluid into the sump was invaluable. Thanks again, mate.

Very helpful!! I thought I knew what I was doing, but this video and your easy manner of narration were really helpful in getting the job done right. Thanks very much! My Massey Ferguson 285 is also grateful 😊

Thanks for your thorough professional tips and explanations of how the components are meant to work and potential problems with assuming that the shop bought/online products will always be ok. Cheers, Gaz

Great job of repairing a pump. I enjoyed the visit. I am so inspired now that I would do one myself but I am a bit short on tractors. Keep on keeping on.

This is what a call a masterpiece...Congratulations and thanks a lot from Argentina.

best video I found on Massey Ferguson power steering pump, thank you very much .

great job love your videos keep them coming thanks

Glad this was here!! I have to do this to my 69 165... I appreciate it!

These videos are so helpful. Thanks so much.

good video, cant wait to see the new press in action

This is great, you are a class act mate!

Great video, thanks for sharing. Im hoping to get a fergie shortly for my back yard.

Best little how to vid i ever watched. A 1 job.a big thank you. :-)

G day Lance, very interesting video. I don't have a tractor but enjoy watching your videos.

A well explained procedure. I am planning on moving to Bundie some time this year so be extra careful when crossing the roads :)

I'm just about to have a go on a mf 265, which I think is the same pump, very good video explained every thing. Thank you from Wales.

Excellent explanation. Enjoyed it. Thank U.

Very detail and helpful thank you

Great video! Thank u

Thanks for video really well presented, I would love to see reinstating it in tractor. 👍

very clear - thanks

Easy sitting down job. I always liked those kind when they came in. Got an old F-20 on steel sitting out in back but I don't believe it has a power steering pump. ;) Good video!! Mike

Hi there, i have watced sevral of your videos they are briliant. thank you.

Thanks Lance! The power steering pump is scary to look at. Feel better about it now!

Thanks Lance, I know that front end was a Tw 10 and the rest was a miss mash of other tractors sent to Ozzie by the poms as more punishment and assembled In Australia. Thanks mate an I will follow your advice. I hope I have a mechanical aptitude as I am a diesel fitter but no experience at all with tractors. Regards Huey

Very helpful 👍

Thank you for Good shoving Change packning and filter 👌🧙‍♂️👨‍🌾

thank u sir u did a very nice job

I hate circlips! Thanks for sharing.

Excellent video.. thanks.. de-mystified power steering pumps for me!

Good information

Thanks enjoyed the video . I have a massey 180 looks like same pump . Steering is failing hope it is as simple as resealing 😁

I re-sealed the pump and it's working again - thanks for the help. It has shown up other problems in the system. The previous owner welded (or braised) the steering shaft to the bracket that connect the shaft to the ram, and also welded the pin that holds the ram to the body of the tractor over on the far left (looking in towards the rad from the front). This last weld has broken and the pin is only sitting in place (not secured in any way). There plenty of play in the steering shaft and the ram/pin so I have no chance of adjusting the actuator mechanism to work both ways. I think I need to replace the whole front axle casting to solve the ram/pin issue and maybe also the play in the shaft. What do you think?

Hi Lance...noticed your phone just in front of your vice....whenever i pull something apart i use my phone to take a happy snap of the different stages of tare down...as they say...a picture is worth a thousand words and makes reassembly less confusing if you refer to the pics on your phone. Another good vid from you. Cheers.

Hi Bundy. Great video. This inspired me to take a look at my Massey Ferguson 175 power steering pump. The tractor is very difficult to turn and needs oil added occasionally. This pump has been taken apart before by someone else--it has the punch marks already in place--and the middle section of the pump is a brighter silver color. My pump is different. Instead of having a replaceable cartridge filter inside the reservoir canister there is a small screen which is attached by what I presume is 1/2 inch pipe thread. Also there is another device in there that is attached by the same type thread that has "relief" printed on the pump housing. The seal looks good, and I can see nothing obviously wrong with the pump itself. The O ring set is different and there are a couple of copper-looking flat pieces on either end of the gears. I should probably replace the seal and O ring and whatever else you think before re-assembling it. Do you know what seat kit this pump takes? Another issue with this pump is that the fill plug threads are about worn out-- I have to be careful not to over-tighten it and strip more threads. Thanks again for your great videos. Ed (using my wife Mary's account). Oregon

Thankuuuu

Thanks. Got a MF 275 to do.

Thanks for your helpful videos! I'm just finishing doing the same job on a similar but different Plessey pump on my MF188. All went well until I started to tighten up the bolts, any more than just snug and the shaft gets very hard to turn and feels like the pump gears are binding up. I have looked more than once and can't find anything wrong. How hard should the driven shaft be to turn after it's all buckled up? How much torque should the bolts have? Thanks for your help!

thanku sir there is also leakage in shoker can it be repaired

Thank you,just finished my resealing of my 5610 ford power steering pump ,following your skills step by step, tag on my pump was E0NN-3K514CB using seal kit from ford new holland / CNH IDUSTRIALRIAL PN.DHPN3A674B ,$ 90.00 us save me big money, thanks again for your videos, 👍

👍

Thank you so much for this video. I had my New Holland 5030 pump leaking into the crankcase. I replaced the front end seal but eventually lost steering power. It was hard before changing the seal, I thought it was the oil loss. Oil no longer escaping but there is no pumping pressure. What could be the problem now? Can I try replacing the other seals?

Great video / I will apply your "skills" to my ford 5610 power steering pump rebuild, Do you have any tips on a 5610 power steering pump, they no longer make this unit and theres lots of after market pumps out there at a heavy price tag, my pump works great just a few leaks bleeding into oil pan witch is a big concern , I have a seal kit for this pump $90.00 just trying to save a factory pump befor going to a cheaper aftermarket pump ,Thanks again for you skills,

This is off topic because I'm asking about using a machine before getting into needed pump unit service, repair, or replacement. I just bought an MF65 diesel. I noticed steering assist was not working on the initial test. The owner was never unaware of this so it has likely been in this state already during several years of his ownership and before. He had used the tractor regularly, but not prolonged heavy use. I found there was no fluid visible in the reservoir. So it seems there is a good chance the pump is already too damaged to repair. I intended to put fluid in, try to detect leaks, and drive it the 30 miles home. I thought I could get my urgently needed mowing done now and deal with the steering issue when I have more time and better information.. I posted about this on a vintage tractor web site and was advised of the risk of damage to injector drive components from a damaged pump. I'd still like to carry out my plan except, also add regular stops on the trip home to add fluid for lubrication. And, when I get there, remove the steering pump if possible before mowing to remove that risk of damage to the drive components. I'm asking you if it might be possible to do that. I assume it would be desirable to fashion a dust cover for the resulting opening in the injector pump case, but don't know if the steering pump is adding structural support. Also don't know yet the procedure for separating the pumps. a link to an online manual would be helpful. Maybe after what the pump has apparently gone through it needs to be replaced. I see options on offered on ebay and wondered about the reliability of the various options.

My massey ferguson 165 tractor with a 203 engine, I replaced a new seal on the shaft and it still leaking oil in the engine. It force out the seal out of the shaft. What advice u can give me. Thanks.

pls.. can u tell me what kind of hoses to be fiteded between the to pumps.

Hi Lance yet another great vid, could you please tell me where you get your little sqiggy oil cans from?

nice..now i can go aut and fix my mf b-50 digger/loader...it have drinking stering oil for some years...old dry hardnenet simmerings/teightings..its a 1974 modell..basis is a mc 165..good video..i give a beer if you komes to denmark!!

What kind of yellow oil you use to mound and it red something also?

I adjusted the turn buckle both ways and I can get power steering to the left and to right but can't get it so both will work. I get it right in the middle and power steering don't work either way. I don't know whats up with it?

hllo sir i am from india i have 245 power stering bt i doesn't work maye be fault of grari can it buy new

Hi Lance, I've just done my Plessey Pump using the Sparex kit suitable for it, but I've got an issue as the pump doesn't turn freely when the 4 bolts are tightened down. As long as the bolts are only hand tight it turns nicely, but when I tighten them down the two guides in which the gears turn are squeezed together and block the gears, because of the inner O-rings push on them. Without the gear on I can't turn it by hand. The O-Rings seem to have good protrusion, it doesn't seem to be too much (~ 0,2-0,3 mm) Did you also have this issue? Is it normal to be as tight before the O-Rings get warm for the first time and maybe settle down? Thanks in advance.

The steering of my Massey Ferguson 3303 is hard to drive, the problem is the filter to change or eventually seals to repair?

I have a MF 165 Perkins 212 engine tractor. Bought it reasently.&. I repaired the power steering pump.and fixed new filter too like the one which was already there.(paper filter with a steel outer . like the one you have in your video) But when I started it did not work. I checked the oil lines, checked the jack, the valve and I checked the oil pressure too, and found the pressure was week, Finally I found out that the filter is not draining enough oil to the jack to move. Then l got rid of the paper filter and fixed a steel mesh filter (like the one in the hidrolic pump.) Now the pump & steering work s well. So please let me know whether the steel filter is the correct one or the paper filter.(like the one in your video.thanks.

how do you change the power steering pump belt on a MF702 with a front pump for the loader?

Hi Lance I live near Kingaroy and own a Ford 8401. I know that a lot of cane farmers used them as haul out tractors. The wiring has been cut and joined and is a mess. New Holland is not interested in helping so could you tell me where to find a wiring diagram. Love the vids, Regards Huey

After watching your video i open pump after closing the pump it doesn't rotate what type of fault may be occur may be houseing interchange

I can’t figure what p/s pump I have for Massey 255. No plate on it identifying it and trying to get seal kit. Looks like alloy reservoir on it. Any idea on kit number

Hey Lance I have a 70’s model Massey Ferguson 185. Seeking some assist in diagnosis with the steering problem. Steering feels loose. Steers to quick in both directions and locks/drags when trying to steer. No visible leaks. Power steering fluid tank is full. Any suggestions would be appreciated. Regards Bernard.

Hi Lance, Excellent videos. I have a Massey Ferguson 35 on which the dynamo was replaced with an alternator. In doing so the tractormeter cable was removed . How can I connect a new cable ? Many Thanks , Martin Hatch , Cavan Ireland

My Massey 175 has had a small power steering leak for a year or so. Was out bush hogging today and when I parked the tractor, there was a clear fluid leaking out from under the tractor just behind the radiator. Cannot find where it's coming from, any idea's? I checked the pump and it seems dry around it and could not see a leak on the line any place.

I came across a p.steering pump on my 390 that has some different looking seals. Can u identify the pump by the pic?

Great video!! How can I find information about this power steering seal kit? I’d like to know if it would work on my older tractor. It’s a 1996 Tafe 45Di. Made in India.

Hi i redid my pump. Is the tank to have pressure in it when pumping , ? Also how do i bleed steering system ? I have a 2002 mf 290 4x4 please if u can help , i would be grateful

What size are your 90 degree adapters that attach to the metal lines going to the cylinder? I am having problems getting metal lines for my Massey165 because they are standard pitch thread, and I can only find metric threads at the hydraulic shops.

You did a great on . But where is the best place to get the rebuild kit at here in N.C.

My Massey Ferguson 175 has the same or a similar pump. The steering has become very difficult. I have added oil, and it disappears but doesn't help the steering. Do you think that pump could be repaired?

Had my pump rebuilt & got it back on the tractor this evening. It's for sure has about 80%-90% better steering but still not fixed. I'm thinking it's the control valve adjustment on the steering column because I adjusted it, not knowing what I was doing. This was before I took the pump off trying to diagnose the steering problem. Do you know the best way to adjust that control valve?

How do we know for sure this is our tractors problem. No power steering now but there was still a lot of oil in the reservoir? Thanks!

Hi , gday what would happen if u turn one bearing wrong suction to pressure, pressure to suction ?

My Massey 175 diesel turns good to the left but hangs up and power steering won't work turning right what causes that

Gday !! Lance , i got the steering moving , but i notice the pump is getting hot is this supposed to happen ?

Hello, , Lance. Indiana, USA. here 2020 .. You did not tell about what type or kind of oil to use ? As all Manufactures have there brand of oils .. But, when you got an older model and the company sold out in mid 80's I believe Agco, now for Massey Ferguson. Hell, I would use old cooking oil just to see if it works and builds pressure ! Thanks .. G day .... PATRICK

Where did you get that sweet vise?

Something is going on with the steering on my 1998 Massey Ferguson 231 tractor. It has hard spots that wanna stop the wheel from turning mainly when you turn to the right. It will do it to the left also but not near as bad. At idle it seems to steer fine but when the RPMs are up it struggles to steer. Do you have an idea of what's going on? The tractor has 1,315 hours. Thank You

I can't seem to find a three bolt gasket for between the pump and the engine block. There only appears to be a two bolt version - will this work with the three bolt pump?

What type of oil do u recommend to use in that pump?

I have searched everywhere and I can’t find a pump rebuild kit for my Massey Ferguson 65 does anybody know if I can use a 165 Power steering pump rebuild kit?

hi mate i have mf 860 back hoe gear box oil going in to da engine oil...can you help me pls

What is the purpose of the valve on the pump?

distributor is repairable or not

8:49 something ran across the floor on the right.

is available in india

sir it is new available

can u provide me video of repairing distributor

I should get a tractor.

A bit of rag?! lol

pls.. can u tell me what kind of hoses to be fiteded between the to pumps.