Out of all the videos I have watched over the years and recently about how to turn off a check engine light, this is the first one that has shown this method. Great information 😎👍

Dude, you rock. This right here is the difference between your knowledge and wisdom. I'm compiling a list of useful car knowledge, and this is going in it.

It worked for me 2014 ES 350. Had it read at Autozone it was a Gas Gap Code. Checked cap and it was off (kids helped pump gas and didn't screw the cap in). After over 100 miles light didn't reset. Tried the ECU fuse as explained on the video and it worked.

Thank you I was trying to find the key sequence to reset the ECU in a Subaru for example my 2014 Dodge Avenger if you want to reset the ECU you could just turn the key to the on position and pump the gas 7 times but nobody seemed to know it so this idea is 100x better than disconnecting the battery and pumping the brakes

THANK YOU!! You are a life saver, and this sure beats undoing the battery terminals.

7-years later and this morning the dreaded dash light came on, initially YTube vids disconnect battery cables but watched your vid for short cut fix it. Now I need to DIY to see if I get your results👍

WOW ! Why didn't I know that; amazingly easy and avoids other problems; THANK YOU !!!!!!!!!!!!

😆 I just came back into the house to wait out the 15 mins after joining my positive and negative battery cables together based on another KZfaq video. And then I run across your video.

thanks for the perfectly clear instructions

You Sir, are a life saver. It was fast and easy. Thanks!!!°

This video saved me hundreds of bucks. Great help! Thanks!

OMG This was so helpful. I hate take the cables off the battery. Thank you. 🤗

Hey thanks for the video. Changed my life.

My car has four ecu fuses. I pulled them all. Super easy. Thanks.!

Brilliant . Disconnecting battery terminal can upset folding mirror function and window shutting .

You are a genius! Thank you!!!

Thank you dude that was real simple I like that God bless you

Hey, just want to say thank you for this video. It works on my civic with the E-MID blank screen problem. This method is much faster and safer than to unplug the battery.

Thank you very very much it worked perfect for my car honda frv. I made it the old school I took the whole plug of the battery left it for 10 min and then pluged it in.. tara! Many thanks again.

Best method, so much better than taking batt cbl off. My radio has about 40 settings that are lost at battery change etc. On my Ranger I killed the pwr to the PCM memory and drained it by putting a load on it at the fuse box. (an analog meter, then let the needle fall to 0). Still have intermittent flooding at start after replacing fuel injectors. So if anybody has suggestion I'm listening. Other than smelling gas at warm start sometimes it runs great and the trans shift points are smooth as glass now.

😁I had recently purchased a 2018 Ford Escape that was getting poor mileage because it had been "living" at sea level and it now lives in Denver, CO which is 5400 above sea level. I took your advice, plus I also pulled all other fuses connected with with the engine or transmission. Mileage went from 22.5 to 27.2 immediately. Thanks! Jim in Denver

Great advice thank-you.

Thanks a lot. I tried different thing but this method worked instantly 🙏🏼

I haven't tried it yet, but it makes a whole lot of sense to just reset the ECU fuse only.

Thank you for the info. I love the background music.

Great advice thank you

Thank you so much my friend.This light on my Instrument panel stays on all the time. I will try having a go at this easy fix. This will save me a lot of money.You are very Helpful my Friend. Jonathan and Audi A3 owner.

Awesome it worked on my van. And i didn't have to disconnect battery which would make my pass lock security system activate and wont let the ignition circuit work unless i do some reset procedures that take time ......👍

How about the capacitors on the computer itself?

Dude u helped me get this fixed thanks man

a good idea ... thanks for taking the time to make this 👍

You are a life saver! Thank you!

Short, helpful and clear, thanks!

Thank you for this video I did what you told ~~ Engine light was reset and gone great and helpful information 👍👍👍👍👍👍👋👋👋👋👋

The music made mine work. Even put the baby to sleep for the real win.

Great, I have done your method and held good result. thanks a lot

When reprogramming a new BCM to disable the Anti theft make sure ALL fuses are installed and working. It is setup to need to communicate with certain parts of the car and without all fuses present (even RDO funny enough) it won't work. This happened to me until I found the info on a forum.

Thank you sir for the video!

I need a beer.

It works like a charm, mechanics can take control over your car and keep your car running bad in order to get more money out of you. The mechanics can keep you coming back for repairs with their scanners and they can use the scanner to keep your car running bad

Thank you Sir. I will try this tomorrow

Nicely explained

Omg it actually worked thanks so much is subbed and liked

Thanks worked for me!👏👏

Thanks alot you helped me very much with this Information 👌

How we can reset on accord 2013. Please tell me.

And it does nothing on my bucket. Any suggestions?

sir, thank you for this advice.

It worked! Thank you!

Thank you, great idea

Thanks a lot!

It solved my Honda Odyssey van’s problem of lights not operating properly.

After replacing fuel pump, maf sensor, map sensor spark plugs ,spark plug wires, catylic converter,throttle body , lower intake gasket,manifold gasket ,vent solenoid,purge canister,and maf sensor for the second time to redo everything po172 and po171 kept comin on till I came to a mechanic that had asked me if I’ve rest the ecm. Come to find out he was gonna charge me 40$ to check it and another 120 to reset it on his scanner which I already paid in the past..This video reminded me of the hassle I went through until I pulled the damn ecm fuses out and disconnected the battery which now has my ecm reset so that it can compensate correctly and now my engine is A1 and no engine light has come on yet….2008 impala flex fuel headache car 🤕……yes I replace everything on that car….always use ac delco or original manufacture not no bull crap brand learned the hard way on that too

Hi brother I have a 2016 Nissan Sentra the check engine light come on it’s says mass airflow sensor and I replace it 4 time in one week is still the check engine on what do you recommend to do thank you

On my car (1997 Saturn SC2) it says PCM (Powertrain Control Module). There are two. One says Powertrain Control Module and the other says Powertrain Control Module Memory. Do I just remove the first one?

Thank you for the clear instructions

Crap! I woulda never thought about that! Lol! Thanks bud!

can you tell me how I can Remove the check engine light at my Lexus Ls400 1998....

Hi mate can you help I have replaced the Lamda sensor what was originally causing check engine light to come on few weeks it was OK 👍 and know it keeps comming back what do you suggest even though I have took it to garage and reset it what other way can I get rid of this engine light it's really annoying hope to hear from u soon

Will this work on a Kia 2007 Sorento, my car has trouble starting up sometimes.

This worked for my 07 Cadillac CTS

What a about a ford probe gt v6 93 model ? I replaced everything except the ecu and now still no fire or fuel could it have a shot ecu?

Just replaced a wastegate actuator solenoid on my 1.5T SI. I’ve got the Christmas tree curse now 🙄 Has this trick shown to resolve such an issue? Will follow up w/ edit..

Does this help with replacing an ignition cylinder

mri car ford ikon ka fan lgatar chll rha hai but uski starting m koi prblm nhi haii prr mechanic keh rha hai ki iska ecm khrab haii mene abhi hi isme new gaskit dala haii but abb iska fan ruk nhi rha horr temprature wali needle activitynhi krr rhi now what to do

Question Would it pass emission test I ones reset my car by disconnecting the negative then I took it over to the emission testing and they would not pass it because they said that they could see that it’s been computer clearness

How shall I know which fuse I should take off, I have kia Optima 2012

You're videos are helping my troubleshoot my Civics idle surge. D16y8 SOHC manual ,(so there's NO fast idle valve). New IACV, plugs, wires, coolant burped, TPS calibrated, map sensor working. Yet it's still surging. It also is idling high (2,000rpm). Vacuum leak? When I plug the throttle body with my hand, it does NOT stall. This suggests a vacuum leak, correct?

Merci pour ces infos. Seb of France :)

IF your car has a problem the light is going to come back on again before long, do yourself a favor and buy an inexpensive code scanner (about $40) and you can read all the codes and fix the problem the right way, or if you just want to turn the light off it will do that too without popping the hood

Thanks alot for your shows your very good man 👍👍💋

Okay. So I uploaded 1 of meant to be 6 files because I was trying to update the system but only 1 of the files got uploaded and is playing about with the pedals and the gearbox making them stiffer so how do I get rid of that file

Thank you

While doing this does the car key needs to be in the ingnition or not

Thank you this worked!!!

Bloody brilliant…..

Thank you to try it on my Honda Accord

thankss so muchh!!! it workedd!! i think i made the light come on because i pulled the 02 heater fuse by mistake and then started the car.... and then i almost had a heartattack when the light wouldnt go off after i put the fuse backs i actually meant to pull out the compressor fuse cos my blower motor is fried and i didnt want someone to turn on the AC and ice up the lines or something... anyway... light is off. engine sounds fine... hopefully everythings good :)

Thank you so much sir

It's great but I don't know if you do this with the ignition on or off

Tank you ro information. Its à master

Is this the same as throttle body reset? 😬

Does it work when u remove the cats and put the o2 sensor back in

How do i know which one is the right fuse there is no indication on the fuse box

I have a 2011 gmc 2500hd gas ,the gague shows overcharge,I had the battery and alternator checked twice,both say ok,,the started had a thump when starting,but only once,then gague will move back to normal,also no engine on ,also checked for loose ground wires ect,

Does it work same for 2002 Acura rsx type s

Top video mate

how to reset ford escape 2012 engine check light. philippine version

Thank you, bro. It worked like a charm On my tacoma truck. God bless you and happy new year ^ ^

Thank you!

Hi there dont no if you can help me but When I changed my car battery my car doors will no longer lock if I disconnect the battery again it works again but then don't start the car then I have to turn the key to the off position and turn it again to start but then the car doors stop working again dont make any sense to me just thought I would ask someone who mite no more about it than me ?

How it work for chevy Malibu 2006?

Would this work on older cars I have a 99 Lexus

I try this night,omg..is working!tq very mush 4 yours advise.i am from Malaysia..👍🏻👍🏻👍🏻

I unplugged the wires and plug it back now my car won’t start what u think ?

Thank you broo

Thanks bro

Thanks I will try it I change my gas cap light went off but then came back on so I tried the battery trick I drove it a few miles and then I'll I came back on this is a real pain in the neck

Best one on the internet.

On a Mercedes Sprinter, does this fixes the P2610 code?