How To Restore Headlights - Chemical Guys Car Care

No video

How To Restore Headlights - Chemical Guys Car Care

Рет қаралды 793,549

9 жыл бұрын

►NEW UPDATED VIDEO:
• How To Revive REALLY B...
Hazy headlight damage is intense oxidation and micro-cracking caused by harsh UV sunlight and chemical stains in headlight plastic. Hazy headlight lenses reduce visibility at night and can cause accidents. Restoring headlights is easy! Greg walks us through the proper sanding, polishing, and protection steps needed to restore clarity to headlights, and keep them clear for years to come.
V Line Polish & Compound Sample Kit
bit.ly/3qsYMTU
JetSeal Paint Protection
bit.ly/43r7RLH
Orange Hex Logic Pad 4-inch
bit.ly/3X1Ugb9
White Hex Logic Pad 4-inch
bit.ly/45OrXRw
2000/3000 Grit Sand Paper Adhesive Pads (3 PACK)
bit.ly/3WVYRvl
Sanding block
bit.ly/42nFqwR
Streak Free Glass Clean
bit.ly/3MWfD9b
Professional Heavy-Duty Bottle & Sprayer (32 oz)
bit.ly/42sExmD
Good Screw Drill Adaptor
bit.ly/3MVn4gP
TORQ R5 Rotary Backing Plate 3 Inch
bit.ly/43tZ8bo
Workhorse Microfiber Towel
bit.ly/3qsZoZI
Don't fall for cheap bug spray or toothpaste DIY methods; they produce sub-par results that do not last. Follow our top detailing tips for a professional and PERMANENT fix to hazy headlight damage! Or if you don't have the time or equipment to do this yourself, hire a professional who only uses these professional methods to do the job.
Restoring the headlights you have can save you time, money, and the environment. High end vehicles can have expensive motors and HID components in stock headlights, which can cost thousands of dollars to replace the pair. Repairing headlights can prevent the need to tear apart the front end of the vehicle to remove and replace the units. Refinishing the headlights you have can also keep them on the car and out of the landfill, saving the environment from extra waste and plastic trash.
#chemicalguys #detailing #carcare

Пікірлер: 444

@ChemicalGuys Жыл бұрын

Restore Headlights Like A Pro!! - V Line of Compounds and Polishes: bit.ly/3qsZP6i - JetSeal Protectant: bit.ly/3OYOViM - Sanding Sheets: bit.ly/3oPLXm2 - Good Screw Drill Adapter: bit.ly/3OYhk8C

@petester_1839 3 жыл бұрын

this video was done in 2015, yet in March of 2021 these methods work today. My headlights on my 2008 honda crv were beyond oxidized, at night you could not see much light from headlights. I purchased the products shown in this video and did exactly the way this video instructed and lo and behold! My headlights were restored ! They look like new headlights! Wonderful products and great instructions from Chemical Guys. Thank you Chemical Guys for the products that work and the instruction to put to use for yourself. Truly works.

@ChemicalGuys 3 жыл бұрын

Thanks so much for watching, happy detailing!

@kevinvines1846 9 жыл бұрын

Just a quick tip, pop that hood and raise it up. Saves a little tape, but more importantly allows easier access to the top of the head lamp. 👍

@davemc3650 6 жыл бұрын

Kevin Vines wax is hard to clean up in engine bay

@PokeFit3 5 жыл бұрын

I was wondering the whole time why he didn't. As to the wax guy above... When did he apply wax?

@matthewderidder8371 4 жыл бұрын

And how would the wax get on the engine bay....(sealant)

@rollingpoet 4 жыл бұрын

@@davemc3650 cover the entire compartment with a sheet, no clean up

@derriello 4 жыл бұрын

A little butter wet wax never hurt no one, available at chemicalguys.com

@Armelmarcus 6 жыл бұрын

We’re also going to be using our high performance chemical guys water for this restoration

@stephenclark15 4 жыл бұрын

yeah, it fixes dead headlights, the best water on the market by CHEMICAL HOES

@gdubya83 3 жыл бұрын

lol. The stuff works but it is imperative for thr vehicle owner to put a coat of wax on the lights after each or every other wash. The vehicle is being sandblasted by traffic in front of it. If the owner does not do that then the lights will fade a year after

@martinhurney2 3 жыл бұрын

@@stephenclark15 oō

@DvUs666 3 жыл бұрын

Even a nice ceramic coat will keep them clear for a very long time

@ManuelLopez-qf3cn 2 жыл бұрын

😂

@incog99skd11 5 жыл бұрын

I just finished following this video and restored my VW Phaeton headlamps. The Georgia sun was playing havoc with them and the car is 14 years old. All the dead plastic came off. I took my time and used the materials suggested in the video. I even bought the polisher. They now look like new. I am absolutely pleased. This Phaeton just turned 89K on the odometer, just had her timing chain and belts done, brakes renewed and she is ready for another 100k easy. Don't let anyone say the VW Phaeton is unreliable. It has been my daily driver since new and now she looks fabulous thanks to the Chemical Guys. If I ever sell this old lady, someone will get a beautiful example of an extraordinary car.

@heavymechanic2 9 жыл бұрын

Some comments indicate Chemical Guys are selling the world. I used the CG products I already have for auto detailing and it lasted 2-3 years before some oxidation returned. (No need to paint the headlights as other people suggest) My Process: 2000 grit sandpaper wrapped around a sanding sponge, lubricated with any car wash solution. A 4-inch orange pad on a drill. I used a med-cut swirl remover (1st step) as the grit wears out, spritz with water and polish at high speed. Repeat the (2nd step) polishing with a finish polish such as Pro Polish 3n or equivalent. I finished the job with M-Seal and a coat of wax. Most of these products are used for paint correction and general car care. Some headlight restoration kits come with a drill polishing pad and their brand of compound, machine polish for best results... This demonstrates you can fix your headlights by using most of the stuff in your detailing supplies without buying extra stuff. *No offense to Greg and the CG Team.

@DatCarGuy350 8 жыл бұрын

I wish my polishing could start music from outta nowhere

@wumana 8 жыл бұрын

lol

@AbdulHadi-ux1pg 8 жыл бұрын

+William Umana m. ,nbpoiu

@PHOENIXX954 7 жыл бұрын

Im dying laughing

@banjopete 5 жыл бұрын

DatCarGuy310 , take it back, mine always does!

@davidweum9334 4 жыл бұрын

Why are you laughing? He's doing a great job.

@Antto 9 жыл бұрын

This is what I wanted to see about headlight restoration. More information is always better. Great work!

@catchaser52 2 жыл бұрын

Me too,, I checked how much new Headlight assemblies cost ! OMG !

@SG01001 9 жыл бұрын

Those results were unbelievably awesome. Good job chemical guys

@599891 9 жыл бұрын

Probably one of your best video's ever, starting with crap and finishing up with like new!

@tomn.8475 7 жыл бұрын

Thanks for the video. I just restored my van's headlamps and they basically look brand new! My wife was surprised that they look that good again.

@ChemicalGuys 7 жыл бұрын

That's awesome a true transformation, thanks for sharing!

@kimvette1 5 жыл бұрын

When I restore headlights I extend the painters' tape out 3-4" so that I can scrub all the way to the edge of the lens without worrying about the paint, and then when I use polishing compound on the headlamp I can also take the buffing pad all the way to the edge and not mar the paint, and then it also protects from any dripping of the uv-resistant clearcoat on the paint.

@jskallingtin 4 жыл бұрын

Not necessary you just gotta be more careful and k ow how to work the machine... I've been doing it for years and got their torq polisher and I love it to do headlights

@kimvette1 4 жыл бұрын

@@jskallingtin It's not necessary until that one time you slip and wish you had put 30 more seconds into taping. It hasn't happened to me yet but I tape off further out regardless because it's good practice to do so.

@Deanwrd 2 жыл бұрын

Very good tip, also adding newspaper/newsprint around the light area into the body helps too. ;-)

@barcode170 8 жыл бұрын

I noticed there was a small neglected part closer towards the Grill of the car that looked a bit hazy bothered me 4 the whole damn video

@flspeid 6 жыл бұрын

Ivan Moreira indeed.

@BostonBorn 6 жыл бұрын

It was just the camera lighting.

@cortexback 5 жыл бұрын

Noticed!

@ronwilliams329 4 жыл бұрын

@@BostonBorn That was irritating AF but you're correct, was the lighting.

@KronicDaydreamZ 3 жыл бұрын

I was staring at it too. But yeah I was watching on a big TV and it was just the angle of the camera and the lighting

@tangsuto978 3 жыл бұрын

I’m watching all these videos all these years later and these homies be spitting game for free. Thank you.

@ChemicalGuys 3 жыл бұрын

Thanks for watching!

@Macurry98 8 жыл бұрын

this is so satisfying to watch

@dsl11080 9 жыл бұрын

Got a call from a client who said they failed their MOT(UK thing) due to the headlights so went and had a look head lights faded, so a slight change to the way you did it, I clayed the light then V34 and then Jet sealed 109 to finish the head light and came up a treat and finished with V07 detail just to top it off. nice one for the guidance. improvise, adapt & over come. job done.

@AutOdometer 5 жыл бұрын

That looks really good. My BMW E36 headlights have these little raised pieces that makes it hard to sand and polish.

@MrKen-wy5dk 5 жыл бұрын

Thank you for an extremely informative video. It was not too long. I couldn't get enough of the real time information that you were giving.

@ChemicalGuys 5 жыл бұрын

Hi! Thanks for the awesome feedback, we are glad to have you apart of the Chemical Guys family!

@fairlanewhip79 4 жыл бұрын

This is the best video about headlight restoration on KZfaq, I’ve watched plenty 😁

@ChemicalGuys 4 жыл бұрын

Thanks for the amazing feedback, we are glad to have you part of the Chemical Guys family!

@kimb9539 7 жыл бұрын

Bringing headights back to life in this manner is what I have wondered about for quite a few years - not anymore with the help of Chemical Guys' greatest teachers.

@ChemicalGuys 7 жыл бұрын

Hi Kim, we made the impossible, possible!! It depends how oxidized the headlights are, some headlights can't be restored, especially when they are oxidized inside and out. You have to be very careful with headlights, you can ruin them because the plastic is very thin.

@kimb9539 7 жыл бұрын

Thank you for alerting me. I paid very close attention as the sandpaper was being used, the amount of pressure applied, allowing the paper to do it's work rather than trying to overwork it and not being aggressive.

@ChemicalGuys 7 жыл бұрын

The part that you really have to pay attention to is when you polish with a drill, which acts like a rotary polisher. Unfortunately with a drill there's no speed control, you could actually end up burning through the headlights. It's tricky, but if done right could make you a wealthy man : ]

@kimb9539 7 жыл бұрын

Chemical Guys Being experienced with a drill, it can be tiring to the hands and arms after a while with extended use and consideing that it is necessary to have good speed control, so thankful for your help, I can see that the right kind of equipment beyond a drill would be in both my and my customer's best interest.

@sk8meup9 7 жыл бұрын

whenever this guy does a video i almost fall asleep

@NewfieMan98 6 жыл бұрын

G0NAGN relaxing voice or boring?

@ericflowers2146 6 жыл бұрын

I did fall asleep.

@bobmar8614 4 жыл бұрын

Talks too mucking Fuch

@davidweum9334 4 жыл бұрын

I lie his approach

@matthewshambler2644 6 жыл бұрын

24:19, Pinkies out, like a Sir! Headlights came out great by the way.

@818BigA 4 жыл бұрын

Thanks for the side hustle info

@ChemicalGuys 4 жыл бұрын

Happy detailing!!

@BaretoesAM 8 жыл бұрын

Worked like a charm on my 2008 Subaru WRX Sti. Thanks for the video and your products!

@CalebRodriguez1988 9 жыл бұрын

CG fan here and I have to say this is a great video guys. Great camera work and background music. The products speak for themselves really. Keep it up.

@Natasha831_1 2 жыл бұрын

When I did this I put the tape out more than 4 inches so I could make sure to sand all the way to the edge without worrying about hitting paint. Great job! They look fantastic.

@ChemicalGuys 2 жыл бұрын

Great tip!

@mrlaw711 4 жыл бұрын

He does a good job of presenting and explaining. I've watched others.

@ChemicalGuys 4 жыл бұрын

Thanks for watching!

@Maghau6 9 жыл бұрын

I really like these videos! Makes me want to start a buisness out of this. Just restoring headlights, if you do that alot you get really good at it and can take on many jobs. way to many cars have this problem. all my 3 cars have glass headlights but some of my friends and family have plastic. Thank you for your videos, I love them! 1080p, kick back eat some snacks and chill and watch you do your magic! I just have to say this too, the first song I didnt really like. But the last one was awesome :) Keep on detailing!!

@bendavidlungu9029 Жыл бұрын

Chemical guys... you're absolutely amazing. Thumbs up to you all

@ChemicalGuys Жыл бұрын

Glad to have you as part of the Chemical Guys family!

@samuelcabrera9456 9 жыл бұрын

When you used the second sandpaper, you should have gone up and down. Since the first pass you went left and right, you can remove the sideways peaks even better, since you're going in the opposite direction.

@jimmieroan9881 5 жыл бұрын

that isn't right , anyone that does any type of paint and body work knows that, all you do then is create more scratches , the idea is to take away not add, think about what you just said

@rokel396 5 жыл бұрын

@microtechmachineshop 4 жыл бұрын

@@jimmieroan9881 so true

@michaelanderson4836 Жыл бұрын

No you go front to rear in a straight forward backward motion not up and down that would make more damage

@ElginEdmonds 6 жыл бұрын

Excellent job, I will get mine done.

@sohchx 9 жыл бұрын

It's bugged me the entire video seeing the hood not popped lol

@itspapaj4732 6 жыл бұрын

sohchx should of just took the headlight off 😂. It's more work, but you'll get the best results.

@fwmoxy 6 жыл бұрын

Congrats on the 300k...win or lose its greats products and videos.

@bigworm6635 5 жыл бұрын

Quick easy $25-40 . I do em all the time. Some will come out like new If damage is on outside. Some get tiny cracks in plastic and that won’t come out. Comes with experience but you can tell right off if it’ll come out or not. Gives cars a lot better appearance for cheap and quick

@johnwilsoniii4757 9 жыл бұрын

Great job Greg!!

@ExeDist 9 жыл бұрын

I just use toothpaste, a coarse brush, a cloth, a sponge and some polish for afterwards. Works for me, so it should work for you and leaves you car with nice and minty X) Edit, it might save you $50 as well, that is one expensive headlight repair kit, seeing as autoglym does one for $30, for everything you are selling plus the guarantee that they are a company that has been trading for the best part of eighty years! I have used many other products which are inferior, and every autoglym product I have used has been the bees guts!

@dddev641 Жыл бұрын

Unreal , you are inspirational !!!

@ChemicalGuys Жыл бұрын

Happy detailing!!

@billgutierrez2980 5 жыл бұрын

The '80s sounding music is freaking awesome....make sure y'all play it when you do your headlights. Just makes is rad...

@ChemicalGuys 5 жыл бұрын

We agree! Happy detailing!

@koioo2 6 жыл бұрын

nice to see jeff in chemical guys nice job

@user-rh6zv8vd5o 11 ай бұрын

Just got the kit did my headlights I'm so upset it worked so good now the rest of my car looks like s**t😅 It's just tooooooo good Thank you I can see at night again

@ChemicalGuys 11 ай бұрын

😄Enjoy your detailing products!!!!

@edrickmendez1729 9 жыл бұрын

Great work!!

@americandetailpros3225 4 жыл бұрын

This is some great info. Gonna order soon those products

@charlie12102 9 жыл бұрын

Great video, I will be trying this at the weekend, thanks!

@Ike-yq3gf 7 жыл бұрын

Looks great guys! Good job. I am going to do this tonight

@ChemicalGuys 7 жыл бұрын

Thanks so much for the amazing feedback and welcome to the Chemical Guys Family!

@Bongskiman 7 жыл бұрын

how hard is it to pop open the hood of that car?

@leebakprime2297 6 жыл бұрын

Wich is the name of the song that starts on 18:55? Nice video!

@ItsRyan. 9 жыл бұрын

Awesome video.. alot better than some of your others!!

@Fireaspider 9 жыл бұрын

NICE ! Its just like chemical guys knows what I'm looking for XD i was just searching the net for products to restore my yellow faded headlights

@michaelsylvester7272 6 жыл бұрын

Hot damn fantastic job with that headlight

@jose15238 9 жыл бұрын

I was sanding the orange peel on my repainted hood and i accidentally applied too much pressure and left some scratches. i used 1500 and 2500 grit with wet sanding but can i re-sand the hood again with 2500 to try to remove some of the left over scratches? im scared of eating up the clearcoat, or would i be fine with just a light sand ? Thank You Chemical Guys

@classic-kool 6 жыл бұрын

Great "How to" vid … Thanks!

@drewhall3958 9 жыл бұрын

100k subs! Congratulations!!

@mattbromfield1883 6 жыл бұрын

Hi there, I’m thinking this same process would fix a heavily crazed Range Rover sport head light too? - thank you.

@artsmart Жыл бұрын

Great job!

@ChemicalGuys Жыл бұрын

Happy detailing!

@ScottPC 9 жыл бұрын

Decent helpful video for a change! Thanks!

@luisantoniosblog.gonzalez9315 6 жыл бұрын

Just loved it

@michaelstephenson9384 3 жыл бұрын

Awesome as always CGs

@ChemicalGuys 3 жыл бұрын

Glad you like them!

@jrus1 3 жыл бұрын

Great video! SO, if i apply the JETSEAL and , lets say I take it a step further and apply a PPE film on light + ceramic coating. will this light last me another alot longer?

@ChemicalGuys 3 жыл бұрын

Hey Gianni! Absolutely, that will add a ton of protection.

@EpicWarDog Жыл бұрын

Wow very impressed.

@ChemicalGuys Жыл бұрын

Glad you enjoyed the video!

@SofaKingTouge 7 жыл бұрын

really worked fantastic.

@JewCrew420 6 жыл бұрын

Lovely vid 👌

@ChemicalGuys 6 жыл бұрын

Thank you very much! Stay tuned for more piston pumping daredevil detaling from the afficiandos at the Detail Garage C.G. Alex -

@nsanzuredgers3105 2 жыл бұрын

Awosome video bt I have a question is it good to use rubbing compound on Head lights restore

@ChemicalGuys 2 жыл бұрын

Absolutely!

@christinamartinez8132 7 жыл бұрын

Looks good

@3mteers 9 жыл бұрын

I would really love to see a video of you guys using the drill with a good screw adapter so that we can see the proper technique.... my biggest fear/issue is controlling spin speed (since a drill doesn't really have a speed setting?)

@somerandomguy3239 6 жыл бұрын

use the cordless small ones,they have no more than 1k-2k rpms and you can blast it on max and keep it there.

@CraigLambert 9 жыл бұрын

Wow. Just wow. Very nice!

@jackw1252 6 жыл бұрын

So what u gone do about that dull border?

@aaronfuksa2047 4 жыл бұрын

I want to know if there's a recommended clear protection film, like the auto paint protect film, will that be fine?

@juanjovillafana8954 6 жыл бұрын

Amaizing.......

@judymclaurin3989 5 жыл бұрын

The drill is better to use but they both work..the rotary drill is variable speed

@sexyquan5 8 жыл бұрын

will you get the same results if you use the hex hand pads ?

@jessejaviangel 8 жыл бұрын

if for some reason you took all the steps and still think it's a little hazy can you redo all the steps again? or is to much sanding bad for the head lights ?

@tedcontreras9729 6 жыл бұрын

Will the headlights stay clear after the wet seal dries,I use other products and after I put the clear protectant on,after it dries it doesn't look as clear as when it was wet?

@IamtheAnimalLover 8 жыл бұрын

Can you do anything to remove heat-related crackling in a plastic lens?

@loskoors2mames276 6 жыл бұрын

Nice video 💯

@harleminthebuildn9234 2 жыл бұрын

TOP MARKS MATE 👍🏽👍🏽👍🏽🎯🎯🎯🔥🔥🔥👏🏼👏🏼👏🏼🙂🙂🙂

@ChemicalGuys 2 жыл бұрын

Happy detailing!

@imoboxingtalk5394 6 жыл бұрын

Do you guys have a video explaining the different polishes you show, like the strengths of each one?

@ChemicalGuys 6 жыл бұрын

Hi! That's a great question. The V Line Series is our complete compound and polish kit. It is our most versatile and comprehensive option and the full system removes anywhere from light to severe paint defects. V32 and V34 are compounds and V36 and V38 are polishes. They are sequential so the lower the number, the more aggressive the product. Next, we have VSS which is an all in one product. It fits somewhere between V34 and V36 and is for the detailer looking to purchase one single product rather than two or three. Then, we have All in One Polish, which is a polish and sealant in one. Not only will it cut away those swirls and scratches in one step, it will also lay down a layer of sealant to leave your paint with a great shine! The video below explains the V Line series pretty well. Make sure to give it a watch and let us know if you have any further questions! kzfaq.info/get/bejne/ftiFoLRn2rK3gH0.html&t

@imoboxingtalk5394 6 жыл бұрын

Chemical Guys awesome thanks

@ChemicalGuys 6 жыл бұрын

You're welcome! I'm also going to leave an article for you below that explains which pad and polish to start off with on your car when using the V Line series. It was really helpful for me and I think it will be for you too! Thanks for watching! www.chemicalguys.com/How_To_Choose_The_Right_Compound_Or_Polish_For_Your_Car_s/644.htm

@imoboxingtalk5394 6 жыл бұрын

Chemical Guys cool, I only do headlights but I'll check it out

@4gClearWimax 5 жыл бұрын

You said you use jet seal on the tires please explain thanks!

@ChemicalGuys 5 жыл бұрын

Hey! JetSeal is only attended for painted, shiny or clear surfaces! Happy detailing!

@keonthompson8166 6 жыл бұрын

I heard the sanding kit works for paint to get rid of Orange peel if so what sand paper do u use frist???

@19NAWTY2 7 жыл бұрын

AWESOME 👏

@patrickmcgee9910 5 жыл бұрын

I question the cost difference of taking my Jeep to you guys to do this vs purchase of a new headlamp assy. Seems like a lot of product I would have to buy if I did it myself. Plus the work involved.

@DeBelgischeBelegger 9 жыл бұрын

i have swirls on my rear lights can these be removed like this? Or is sanding too agressive?

@wellnessforall6663 4 жыл бұрын

This is the best head light restoration video. You guys are awesome. I am from India. Do you ship your products to India? Plse let me know.

@ChemicalGuys 4 жыл бұрын

Hey! Thanks for the amazing feedback! We recommend checking your local listings to locate a reseller near you.

@Samandar678 7 жыл бұрын

Does the kit come with the orange and white pads you used here in this video? I don't see it in the list on your website.

@likkaweyy 9 жыл бұрын

Can I take in my car to a chemical guys location, so I can have this done?

@kingbotzcustoms 9 жыл бұрын

VERY cool track playing at 21:00! Is that a generic track available free from KZfaq or did you guys use your own custom music? Thanks! Oh, and great tutorial by the way, thanks for the upload! :D

@javoresblakley7101 4 жыл бұрын

Hey I purchased the kit and I know you say that it should be able to do 40 cars, but how do I reuse the sandpaper after I peel it off and switch to 3500. Also sandpaper says 2000 and 3000, not 2500 and 3500?

@erichabursky8613 7 жыл бұрын

can you do this by hand or do I have to buy one of these tools to start?

@lafinestautodetailing 9 жыл бұрын

Great Video 👍

@skelitalmisfit12 9 жыл бұрын

The only thing i don't like is how he keeps referring to the damaged plastic as dead plastic. The plastic was never living. I am a perfectionist I guess.

@antoniopalos72 7 жыл бұрын

skelitalmisfit12 That's what I was saying!!

@rhonorful5088 6 жыл бұрын

Dead as in slain by UV rays!

@snavarro228 6 жыл бұрын

Yeah it's just bad UV plastic coating...

@kentonquint8688 5 жыл бұрын

Well, since plastics is a petroleum product and petroleum is made from dead dinosaurs......

@discingaround 4 жыл бұрын

The perfectionist didn't capitalize the 'I'. Nice.

@mohammedfaraj1111 6 жыл бұрын

Perfect

@Efra-tesa0818 6 жыл бұрын

Im done i can't spend 28 min watching something that i can finish in 10 min. Nice job btw

@atticuschiu 7 жыл бұрын

Whats the soundtrack called?

@craigfam7054 3 жыл бұрын

I have hydroslick and hydrocharge. Can I use these as a sealer?

@ChemicalGuys 3 жыл бұрын

Hi Craig! Absolutely, use the Hydro Line for a durable layer of protection.

@31bradi 6 жыл бұрын

Very nice job 👏👏

@ChemicalGuys 6 жыл бұрын

Thank you Jean, we're grateful for the support, and we look forward to making more awesome videos like the one you just saw. Stay tuned Jean, we have another spectacular video launching tomorrow which should be equally spectacular. C.G. Alex -

@Rebecca_The_Dragon 4 жыл бұрын

what do you guys recommend on newer headlights? My 17 Focus ST's UV coating is flaking off my headlights and i dont know how to remove the rest of it without sanding and I dont have the tools necessary like a polisher or anything, I dont see any point in buying them if I will only use them once then never again.

@TheCreationman 9 жыл бұрын

The only thing that bothers me.... Is that Your shipping prices to Canada suck! lmao I had my cart filled up with $90 worth and the shipping was like $70!!! I mean, I'll spend $200 on all products and accessories, if only I had free or cheaper shipping

@TheCreationman 9 жыл бұрын

papitosabe Buffing pads, detailing brushes, polishes, waxes, all purpose cleaner. And probably a couple more things :P

@TheCreationman 9 жыл бұрын

papitosabe When I get the money I'll try it out... thanks!

@olivier.st-amand 9 жыл бұрын

The Creationman I agree... I contacted them concerning this issue last week. No reply yet. I also mentioned that amazon.ca has decent prices but relatively bad product range, whereas amazon.com has a lot of stuff but won't ship everything to Canada. Keeping my fingers crossed...

@mariolaberge7741 9 жыл бұрын

The Creationman check at eshine.ca its in Ontario and if you order for $150 its free shipping

@davidrintjema4225 9 жыл бұрын

The Creationman FYI Chemical Guys now has a Canadian location in Bradford, Ontario! The online store is not open yet but here is a link to the website. www.chemicalguyscanada.ca/ Should be open soon! They also have a facebook page. facebook.com/chemicalguyscanada?fref=ts

@Canthurtmebro 6 жыл бұрын

Would any standard drill work for this?

@crystalsabundance 7 жыл бұрын

Impressive

@ratherbeshooting8072 9 жыл бұрын

can you use a porter cable DA polisher or do you need to use the rotary polisher?

@mechantetv4211 9 жыл бұрын

I'd also like to know sinc I only have a DA Porter Cable

@ratherbeshooting8072 9 жыл бұрын

MechanteTV I used chemical guys headlight restore kit and used the porter cable DA with 3" backing plate with the orange pad V34 and black pad with V36 and finished with jet seal. Came out pretty good just had a light fog line in the middle of headlight that did not come out, but not bad. looking into dvelup headlight restore kit for the next one and will determine which one is better.