This is my project for tomorrow. I sew regularly and this is my first upholstery job. I never would have thought about the spray adhesive. Thank you! I also agree that the fast forward part was awesome.

Thank you! That was a well done video. Not too long, but exactly what I wanted and needed to know so I could reupholster my seat. Thank you!

All set!!! My seat is 23 years old and the pan s cracked up. Can't even imagine doing this without the spray glue. It came out great and the seat now fits back on the 4wheela and even clips on now! Likely from not being distorted by the old cover! Thank you so much!

Was not expecting that choice of music

Great job! Have done regular chair seats. Thanks for the heads up on heating the vinyl & where to start at. Saving ourselves $$ on our atv seat...have 2 razor seats to redo next.

I was trying to do mine without the spray glue, and it was dang near impossible. The spray glue really makes it work good. It's like having an extra set of hands to hold it in place.

I've installed factory vinyl covers that have matching seat bends. Great video for making any vinyl match your seat curves for excellent pro fit. you da' man!

awesome little trick with the dryer

Awesome job. I know everyone should know how to do this kinda stuff, but it is kinda intimidating when you're not sure exactly what to do. Your video helps show step by step. I've got three seats to do... I start tomorrow. Thanks for your video and help!

The dryer & the spray adhesive - great tips! I think I can do this, thanks man!

Thank you for this, I figured it would be this type of process, it having it confirmed is reassuring. Loved the music.

Nice job, just what I needed to see for an easy install. 100 degrees in CA, I'll heat soak new black vinyl in hot sun. Nice touch with (timeless) classical music that kept me in video to the end. Life is a gift. Be Blessed

Great video, also, If you have cracks or holes on the foam part of the seat, use polyurethane caulk to fill the holes or divots, then cover with thick tape, let it dry for overnight, then the seat will be even and smooth again, then use glue and marine vinyl the next day.

Thanks man. I don't think I have ever posted on a video before but I had to on this one. You really did a great job teaching the process. I never would have even thought of trying to do that. After watching your video I was like - heck that doesn't look bad at all. Came out great and saved me $100. Have a good one

Great job bro, appreicate the hacks about the dryer and the adhesive.

The whole dryer trick is the key..it made a major difference in the entire thing..thank you so much for sharing...😊

Thankyou for the video! The music was a nice touch too!

Did my 2012 Honda for a rip in the back. Actually added some extra foam beforehand. Thanks for the clip!

I do leather re-upholstery but have never worked with vinyl. I was trying to re-cover a seat for a friends fourwheeler but the vinyl just wouldn't stretch right and kept getting wrinkles in it. The dryer trick was the answer! Thanks!

Smack dab in the midst of doing mine... Got it peeled but now it looks like I gotta get spray glue and hit the dryer! Awesome video!!!

caleb our videos have been some real help dude and nice wash/dry dude

Thank you I'm fixing up my nephew 4 wheeler for his birthday 🥰

Good job man. You gave me the courage to try to do my seat ;)

Wasn't expecting to hear some Yo Yo Ma in this. Well done!

The fast forward part was so funny. Nice job!

Best video ever!!!! Really helped us! Went just like he said!!!! Thank you

That's one bad ass dryer. Thanks for the tips.

Outstanding, that really looks great, and great tips, who says a 68 year old man can't learn something from a youngster LOL Thanks!! now to redo my polaris 300 xplorer seat.

Great job man, thanks for the lesson.

I just did the seat on my foreman! Your a genius!!

Thank you so much. My atv now has an awesome seat cover!!!!

thanks for the video my good man, my foreman seat developed a tare in it but it was underneath the overlapping of the cushion from my back seat, so i never noticed, till one day i was washing my atv and noticed the seat split open the whole way across the back, i think ill attempt this over the winter thanks for the courage ps. wish i seen this video sooner my friend just paid someone 80 bucks to do this

Cool deal! Thanks for making this video!

Good job man..excellent!! Great music too!!!

Thanks for the vid man. I’m gonna take a crack at this on my Honda atc. Not worth bringing to a shop since the whole machine is about 500 lol. Love the music choice btw too!!

Thank you! Great video!! Explained very well,I watched a few vid's, your the only one to put it in dryer.This is my first time,hopefully it works.It showed on another video to use tape to cover any holes.

That looks good thanks for the vid

Greta info, Excellent job on the video too. :) ...like the music.

Short and sweet, very nice!

That was sweet thank you for the tips I need my bayou redone my seat that was awesome

That turned out great!

i am redoing a mini bike harley davidson motorcycle using a 49cc motor its was given to me in rough shape i am restoring it and its seat was in need of major surgery it was actually in so bad of shape that you couldnt even call it a seat i put on a cover on it but was nothing like the one you did using the spray would help nice job with it.... this is my first seat to redo so hopefully it will come out the way you have it done great job

Good video... Great Music!

Good video man just ordered a new seat cover for my Honda 300 gonna use ur tips to replace mine, might make a video of it too, i got u subbed

Great tips. Gonna give it a shot. Thanx

Thank you for the Pro tips and making this look so easy. Where do I get the vinyl?

Thanks bud . You just save me 240$ I got a couple of 2002 TRX 250. The guys wants to charge me 120$ with my fabric EACH. I'll do it myself. Thanks again.

Great job brother I got to my banshee sit.

I love classical music and atvs so Im subscribing

Don't use spray adhesive! A good trick is to use a garbage bag over the foam so vinyl can slide. Heating the vinyl is a good recommendation as it allows you to stretch tight.

Me personally I don’t use the adhesive bc when you don’t use it it lets you get it way tighter and it also is way easier to work with

great vid. ya helped me out of a jam and wasted matts!

Super presentation. You didn't waste time with a bunch of yakking. Thanks.

I need to do a Kaw. 610 mule bench seat. Thanks for the info.

Seat work great. Music awesome.

Good job, Sir.

Great Video Kaleb! I'm going to try this on my quad and my snowmobile. How is your seat holding up?

damn good job on the seat and the video. very informative and clearly said.

Awesome job. 👍🏻

That's awsome 👍 I was having a terrible time trying to do mine

Sprinkle the sponge with 3M adhesive. The seat carver is heated with a hot air fan. I saw it well.

You chose the wright music a celloconcert I think from Locatelli and did a great job o the seat!!!

outstanding work.

It may be best to spray both seat and vinyl. Doing so will use less contact spray.

Good Job! Well done. Will save money

I had no clue when I first started. You wanna fix it, but you don't want to mess it up more than it already is. It is a bit intimidating. I am glad that my video helped. Thanks for watching!

nicely done !!

This was very helpful.

Pretty good..can see some slight wrinkle...but overall a damn good idea....

Great job

Good job!

My g right there, thanks man.

great video.. I just wanted to know if that glue was still holding. your seat looks professional. I'm inspired to try and fix mine. thank you...

nice work man

Pretty good man thanks

thanks. thought that would make a few people chuckle.

Great video, your choice of music was a delightful surprise, made me smile,... figured it would be some southern country rock but NOPE.. was it Tchaikovsky or Bach??

I tried it and had difficulty on the back around the corners. So it looks pretty welfare but good enough. Also my staples were only 3/8 which was definitely too small so I will have to get bigger ones to finish.

Good job bro

idk if i should do this or just got to the shop in town and have them do it they charge $40 and u get to choose wat color leather

Good video

I think I might have seen enough to attempt my 1982 xr500r it's a tricky bike. So far.. lol thanks

holy crap. You could get 3 four wheelers with a dryer like that!

Can I use canvas instead of vinal?

I covered my seat on my dual-sport using your method. Holy cow it worked so well! No more wet butt! My only problem was the stapler. The staples didn't want to go in. How did you get your staples in so easy? Thanks for posting. Am going to link to this.

that spray has directions on it. you spray both items and let them get tacky before putting together. Also never use glue on a job like that. good thing it was not made like that or you could have not reused the foam. Now if you tear the seat you will ruin the foam to replace next time. But it looks good and I hope you don't need to do it again.

Sprinkle the sponge with 3M adhesive. The seat carver is heated with a hot air fan. thanks.

Hey genius...what's the point of putting it in the dryer if it takes a 1/2 hour to put on and cools down in 30 seconds. Tip for those that read this. Heat gun. Heat up as you go in the areas your working on. Came out awesome...

awesome

Thanks for watching & commenting. Hopw your seat redo goes well.

Holy crap. How many staples were harmed in the making of this video?

What is the name of the song you used? Nice video too. The glue is a must.

Thank you!

Good shit

good job

Good luck a.nd thanks

If you ever have to change the seat cover again with it come off with that glue ????

Where did you buy the vinyl?

Thanks helps alot

Not bad at all