How To Saddle Pipe at Odd Angles

Рет қаралды 82,167

Жыл бұрын

In this video, I show you how I figure out the odd angle on this custom gate. I will be using digital prints to help me on this gate. You can find the prints on our website arosswelding.com (link below). We will be building 2 - 12 foot gates made out of 4 1/2" pipe and 3 1/2" pipe.
Digital Prints - www.arosswelding.com/shop?cat...
TEXT ME - (405) 643-7176
AROSS STORE: www.arosswelding.com/shop
------------------------------------------------------------------------------------------------------------------
AROSSWELDING TRADESCHOOL - www.arosswelding.school/
Free Course Example - www.arosswelding.school/offer...
------------------------------------------------------------------------------------------------------------------
Free Resources - www.arosswelding.com/resources
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
JOIN THE INNER CIRCLE: arosswelding.mn.co/landing/pl...
Details about the Inner Circle: arosswelding.mn.co
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
AROSSWELDING.COM - www.arosswelding.com
NEW CHANNEL WITH QUICK TIPS AND TRICKS
AROSSWELDING SHORTS - kzfaq.info/love/sPG...
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
Social Media links - come hang out after hours.
My Instagram: / arosswelding
My Facebook: / arosswelding

Пікірлер: 59

@lyster1ne681 Жыл бұрын

It takes a real businessman to know when and how to delegate, even if your pride as a welder might make you want to burn every joint on your own. Doing all that cutting and fitting to ensure that everything’s correct and up to standard, and then letting someone else do the easy work, is a testament to your humility and knowledge!

@XBKLYN Жыл бұрын

I have no idea how I got here but this vid was strangely relaxing and informative. This gent is the Bob Ross of pipe fitting 😊

@neilheriot2361 Жыл бұрын

I start a new job in a week, they require one of those angle finders and a bevel gauge . My idea of the angle finder was way way off and I didn' t know what a bevel gauge was, I have never had to use them. I definitely learned something over coffee today, thank' A R. 👌

@olddawgdreaming5715 Жыл бұрын

Great looking gate and lots of good info too. Thanks for sharing with us, stay safe around there. Fred.

@emmanuelgermain769 Жыл бұрын

Nice work! It's in times like these that you sometimes miss having a good fitter with you that can develop templates fast. But it's also by doing that you get better and increase speed and productivity so I give you a great thumbs up for taking your time to do your templates and work to a good standard of quality.

@petermccuskey1832 Жыл бұрын

From an old welder, Nice tutorial!!!

@johnlakebrink8000 Жыл бұрын

When building gates or working on say 3,4,or 5 rail fence; I ask all guys on my crew to use this terminology and mark the pipe accordingly with soap stone, TT-is top top aka high side of pipe top side, TB is top bottom, aka top side of pipe on lower side if running down hill, BT-is bottom top aka bottom side of pipe in correlation to the tt side , last but not least BB or bottom bottom; follows suit with aforementioned… it helps guys to start visualizing their cuts and copes and to quickly realize that if their line posts or gate ends r square or titsmcghee level, then the opposing cuts will be exactly the same…most importantly it helps stop guys from wasting pipe by not paying attention and putting their short side cuts on same side of pipe I really like the custom templates; especially for gates… great stuff brother keep it coming.

@simpleman4224 Жыл бұрын

Great job buddy! Have a great weekend! 👍👍👍👍🇺🇸🇺🇸🇺🇸🇺🇸🙏🙏🙏🙏

@MastaYoda Жыл бұрын

Hey Austin thanks for the amazing videos

@arosswelding Жыл бұрын

Glad you like them! Thanks for watching!

@Grunttamer Жыл бұрын

Austin, why don’t you keep these cut templates and then transfer them to metal and market them with your plans for the gates

@LifetimeinWelding Жыл бұрын

Because they are easy enough to make them oneself

@Grunttamer Жыл бұрын

@@LifetimeinWelding fair. If it was me wanting to fabricate a gate from his site for one of my first pipe projects I would want it to be as idiot proof as possible. He makes it look easy but he has an insane amount of experience.

@LifetimeinWelding Жыл бұрын

Get the practical skills first and that is:- look up “finding the joint lines of interpenetrating geometric solids “ & “parallel line development” Other wise your whistling in the wind.

@brandonattakai1791 Жыл бұрын

⁰

@johnnyboy8228 Жыл бұрын

Every angle is different

@gaildimick1831 5 ай бұрын

Very nice, thanks for the info. Makes me want to get out and work, if the weather will cooperate. God Bless and Keep the Faith.

@mikesmith2383 Жыл бұрын

Recently found your channel. I was going to ask why you stick weld most all your projects instead of MIG. Also, those cutting torch skills are second to none!! Thanks for the videos, good sir!

@malabuu_1557 Жыл бұрын

When you’re outside MIG doesn’t work very well because the environment will mess up the shielding gas and cause malfunctions in your weld. MIG is mainly used indoors.

@greatestever545 Жыл бұрын

Nice!!

@pivvittle6003 Жыл бұрын

This was fascinating to watch... 😏

@johnnyr4767 Жыл бұрын

Interesting to hear north Dakota mentioned

@royestrada7061 Жыл бұрын

Could you make a video explaining difference of all the engine driven welders and explaining the gears and setting please. Thank you Austin

@briandowson5476 26 күн бұрын

Austin. Can you elaborate on those hinges in an upcoming video please? I’m quite interested in that design but I’m not quite understanding how’s it’s all supposed to come together.

@paulusmarc Жыл бұрын

Bon Boulo, Vidéo trop courte😀😀👍👍

@stanwooddave9758 Жыл бұрын

Austin, not trying to be a smart-arse, but the CAD program I'm using, (Turbo-Cad 2020) shows that if your vertical upright for the gate, is 5' Ft. next to the 16' Ft. - 6 1/4" in. 8" in. Dia. pipe, Gate Entrance upright. your overall gate width is 11' Ft.- 9.759" in. Allowing for one inch weld-on hinges. Front part (the vertical is 3.5" in. dia., X 3' Ft. - 8" in. tall / height) I'm getting /showing a 70.099° angle. That's measuring three inches down on the 5' Ft. vertical, and at the front / leading edge of the 3' Ft. - 8" in. vertical pipe measuring up from the bottom the gate front upright 5.637" in. approx.

@bartbley1269 Жыл бұрын

Does the cad program transfer well to the reality ? Can cad do cope templates for different wall sizes ? Wall thickness makes a big difference to cope fit .

@rodrigomelchor2142 Жыл бұрын

Where would you look to buy fence pipe in indiana?

@user-cv5kp7zz7q 2 ай бұрын

Where did you buy that grinding cone from?

@evansullivan3455 Жыл бұрын

Love watching ur videos . I have learned a lot from ur videos . Ur bad ass at what u do!!!

@paulhunter9550 Жыл бұрын

Great video!! Question? Not being critical here but I here you say learning curve or maybe learning more when you end having to take the long way around on a project. Do you figure out the best or fastest way and then your charging the customer or is the customer being charged while your figuring it out? Just wanting your opinion/advice so I can be fair with my customers, thanks

@mattcollier1712 Жыл бұрын

What do you use for template material?

@whoknows3347 Жыл бұрын

K ron...Karen makes me miss the neighborhood cat named carl....same colors....

@oldlincolnpipewelder Жыл бұрын

How is it cold in Oklahoma? It was in mid 80s all week here in VA!

@mikewilber2886 Жыл бұрын

How about a video on that welding bed you’re building?

@janvanniekerk3267 Жыл бұрын

How do you get your 7018 to restart that easy? I'm new to stick and I end up touching them up on the grinder or I can't seem to strike an arc with the Flux balling up over the tip. I've been using 6011 to root pass and cap with the 7018 on my h-braces

@jr.h6595 Жыл бұрын

Try using a file to file down that tip

@J_bar_S_Photography Жыл бұрын

OK, this is a weird question lol but what brand are all your jeans you wear and where do you get them??

@bigwhisky4676 Жыл бұрын

Nice job brother I know how those angles can be time consuming but you have that shit dial down, I just changed the timing belt in my classic I 250,It was so loose it was about ready to jump time, I was just wondering when was the last time you changed yours, just curious get back to me if you can on that! Good job bro

@apeterson23 Жыл бұрын

You have a link for the angle finder you use? I dont see it on your site. Great video!

@arosswelding Жыл бұрын

www.amazon.com/shop/austinandkayla/list/YYD1YWZBWPM1?ingressOrigin=shop&ref_=aip_sf_list_spv_ofs_mixed_m

@user-in1og6cj5g Жыл бұрын

Hi austin my names dalton so here in 4 months me and a friend and going to be going on the pipeline and I was wondering if you had any tips for me or anyone going with a friend and the pros and cons of it?

@stevekitchens7876 Жыл бұрын

Austin - 1/3 of the pipe diameter will get you real close on the ear length of a cope like that.

@jayjames7619 Жыл бұрын

I try to watch your videos when I can. I am a refrigeration technician apprentice... 2nd year.... my question is, are you R certified? I am a hobby and non certified welder. I was wondering the process of getting R certified and the prospects just that field... in your opinion. Thanks! I am 50 years old and decided to change change fields... from 20 plus years of manufacturing of food and pharmaceuticals to maintenance.

@2nickles647 Жыл бұрын

I'm certified 😜

@namarhodge568 Жыл бұрын

What happened to the 12" pipe entrance you were doing to be sent off?

@arosswelding Жыл бұрын

kzfaq.info/get/bejne/erZ1gJySrrGwZqM.html

@WCMusicProdigy 8 ай бұрын

What kind of gloves are you wearing in this specific video?

@LifetimeinWelding Жыл бұрын

Full size Set out of the gate or any frame out using chalk lines on a setting out floor. I.E. using multiple sheets of 3/4” steel sheets 8x4 stitch welded or larger on level concrete. Then make the template from the set out angle using “parallel line” development method. Accurately Cut and shape the parts no guesswork and cutting and grinding a second time. Convert the chalk line set out to an assembling jig. By welding on angle iron as side stops Question is. Why use pipe. Box section would be easier or T section or channel section or L section. Surface protection. Where I live they’ed need to be galvanised.