How to Notch Tube with Cheap Tools!

Рет қаралды 421,305

Күн бұрын

Learn to notch tubing quickly using a template and a grinder. This video shows how to create templates for quick notching and how to notch tubing if you don't have access to a tube notcher.
Tube notchers are most valuable in production work where many of the same notch are needed. In this video we discuss why an expensive tube notcher may not be worth the expense for small shops and how you can save time by just notching by hand.
0:00 Intro
1:26 Tube Notching Using a Template
5:10 Creating a Notching Template
7:03 Notching a Tube at 90 Degrees Without a Notcher
9:00 Why Tube Notchers Don't Save Much Time
13:08 Notching a Tube at 45 Degrees Without a Notcher
The Tools Featured in This Video:
As an Amazon Associate, I earn from qualifying purchases.
Empire Abrasives
lddy.no/vxuk
Get 10% Off! Use Promo Code GarageFab
Harbor Freight Grinder
Corded 4-1/2 in. 5 Amp Angle Grinder
Welder ESAB Fabricator
amzn.to/3hI8Thp
Plasma Cutter Hypertherm
amzn.to/3uShQbw
Vise Wilton
amzn.to/3tRNSDc
Hole Cutters - Hougen
amzn.to/3tMnbQp
amzn.to/3hudtPX
Sheet Metal Shears - Kett
amzn.to/3uW0VEQ
The Video Production Equipment I Use:
Cameras:
Sony A7iii Mirrorless Camera
amzn.to/3uTZlUb
Lumix G7 Mirrorless Camera
amzn.to/3wbihOw
Audio Equipment:
Rode Wireless Go Lav
amzn.to/3bvamDv
Giant Squid Lav
amzn.to/3wbiEso
Sound Recorder Zoom H4n Pro
amzn.to/3wg8s1P
Tripod Manfrotto
amzn.to/3tRdQqr
Tripod Head
amzn.to/3fhRpW6
Neewer Camera Slider
amzn.to/3floyjR
Teleprompter
amzn.to/2STdMK2
Lighting:
Flashpoint Ring Light
amzn.to/3wb6jUV
Phottix Nuada R3
amzn.to/3w7GANa

Пікірлер: 773

@rockypessoa9692 3 жыл бұрын

There really are a LOT of tube notching videos on YT but this one is by far the most detailed one I found. I’m in the process of building a roll cage(pre cut tubes cuz I’m a noob) and I’ll be making those templates for the next one. Thank you so much!! 🤘

@GarageFab 3 жыл бұрын

Thank you, Rocky! Pre made tubes is definitely the way to go if you have the option. Cutting and bending is crazy time consuming and tedious. 😩

@jerrypuckett6733 Жыл бұрын

Dude we were all NUBES! Life. Live it. Learn it. Sounds like a quote from Fast times at Ridgemont high. 🤘🏼🍺.

@blaphtome9382 4 ай бұрын

A chop saw, band saw, or better yet a modern cermet metal cutting saw set at 32 degrees will make perfect notches for 90 degree pipe connections in a fraction of the time with no template needed. You can learn the degrees needed for angles with very little experimentation. I mostly do structural work now, but have built thousands of feet of tube railing using this method. Cut pipe at 32, rotate pipe 180 and repeat. You'll figure out the rest quickly if you have a room temp IQ.

@PureClint 9 ай бұрын

I have a 3D printer, and this video made me go search for 3D printed tube notching models for templates. Turns out there are loads available. Thanks for pointing me in the right direction.

@GarageFab 9 ай бұрын

Nice! Lemme know how they work for you. I’m itching to learn 3D printing.

@Dunnimc1 4 ай бұрын

@@GarageFabBambu Labs A1. Go! But for real, super easy to get into now. That machine will take you places. There are some super simple CAD programs like TinkerCAD if the more advanced ones are a little daunting. If you want a printer that is a little more serious I would look into Bambu Labs higher end models. Could print ABS and Nylon for your projects.

@skidroseracing Жыл бұрын

I love the marker slide trick!

@GarageFab Жыл бұрын

It’s the little things!

@garysheehan381 3 жыл бұрын

A wonderful instructor. Clear and concise. Thank you.

@GarageFab 3 жыл бұрын

Very kind words. Thank you. 🙏

@joytrucker5709 Жыл бұрын

"Keep Moving Forward", I like that.

@GarageFab Жыл бұрын

As do I. Things don’t always go smoothly but you can almost always make the best of it and squeak out some amount of progress.

@howardhughes6212 2 жыл бұрын

I was thinking about buying a notcher and I’m not. Great video. You earned this welders subscription

@GarageFab 2 жыл бұрын

Thank you, Howard! I kinda feel bad though. Notchers definitely have their place! I bought a cheap Harbor Freight notcher. It’s not the greatest tool but it comes in handy once every 3ish years. 😉

@_mylastname Жыл бұрын

Ditto

@Gangstar41145 Жыл бұрын

Same 👌🏿😎

@notme8121 Жыл бұрын

I have not yet needed to make any tubing notches but I have about seven or eight of those Grinders so if the need comes up I can certainly handle it thanks to your video. Thank you

@Adam-pk1bn 2 жыл бұрын

Very well explained , you can not beat simplicity

@GarageFab 2 жыл бұрын

Thank you, Adam! 🍻

@chuckieswickedgoodfab Жыл бұрын

Man, the teaching is just amazing in these videos. Well done sir

@GarageFab Жыл бұрын

Thank you my friend! It’s been a rewarding job so far.

@benbeecher5339 Жыл бұрын

I watch a lot of videos, you’re right up there at the top of my list. Thanks for sharing.

@dennishill6070 27 күн бұрын

As a steamfitter I often use a program that allows me to print out a continuous sheet of paper with x's on the sheet that I would then i.e. wrap this template around a 6" pipe, tape it and then take a punch and mark at each x on the sheet to end up with the correct cut line. Next I get the torch out and cut on the line, clean it up and ready to weld. I can do this in the field very easily for any size or angle and for instance I could put a 3" saddle on a 6" pipe at 45 degrees. In a fab shop we always have templates for various combinations and sizes or I would just get out the pipefitters handbook and layout according to the formula. I like your presentation. well done.

@GarageFab 27 күн бұрын

Thank you, Dennis! 🙏

@Goldwing1500rider Жыл бұрын

I started making square tubing onto round tube… it was challenging!! Thank you for sharing.

@GarageFab Жыл бұрын

Wait what?! You mean notching square tubing to round tubing? My pleasure my friend. Happy to be of service.

@daxinventor3542 Жыл бұрын

You are a good teacher. I sometimes have a problem following. I learn immediately from your videos. Thanks this is easy to follow and accomplish.

@GarageFab Жыл бұрын

I’m the same my friend. Always struggled with learning. Thank you!

@davidhenson3372 5 ай бұрын

Loving the videos!!! I once was a single grinder man too... Lol got me another and it has saved me more time than you'd ever imagine swapping from flappers to cutting discs!!!

@hawaiiansoja Жыл бұрын

Holy shit!! The trick where you slide the marker on the table to mark a straight line on the pipe is absolute genius!!!

@GarageFab Жыл бұрын

Sometimes it’s the simple things! Thank you my friend!

@loganfigeac1 Жыл бұрын

Best how to notch a tube video out there. You make it seem so simple because it is after this. You just made my next project come to life. Thank you. GOD bless 🇺🇸

@GarageFab Жыл бұрын

My pleasure, Logan. Lemme know how things go!

@stevejordan1354 2 жыл бұрын

This vid is fantastic- thank you so much for paying it forward. I'm a bit more confident moving ahead with my first roll cage installation.

@GarageFab 2 жыл бұрын

Right on, Steve! That’s what I like to hear. Good luck and I can’t wait to see what you create!

@zdravkolukanov8469 10 ай бұрын

by far the best notching video.. ty

@GarageFab 10 ай бұрын

Thank you! Very much appreciated. 🙏

@XJTink 4 ай бұрын

I've just stumbled across a couple of your older videos and they've been very helpful! Thank you!

@Futemire Жыл бұрын

If you need to develop a notch template for the first time and don't have any pre-notched pipe at the angle you need, you could use something like Autodesk Fussion 360 or any other CAD system to generate the template. You can then export the template lines to a printer or even send them to a laser cutter if you have access to one. 👍

@GarageFab Жыл бұрын

I downloaded Autodesk a while ago. Steep learning curve on that one! I hope to get the hang of it in the future. Sending files out to have cut would be amazing!

@mikenewman4078 Жыл бұрын

Agreed regarding CAD. FreeCad is now a good option without the baggage.

@mikenewman4078 Жыл бұрын

Like your work,subscribed

@GarageFab Жыл бұрын

Thank you, Mike! Times 2!

@cameronkeating6780 10 ай бұрын

@@GarageFab Autodesk is powerful, but if you just need simple 2D parts my goto product is Vetrics, it's what I have used for years, and it talks well with other programs.

@biglouie69 7 ай бұрын

Excellent in every way, notcherally!

@terryfrymire2705 Жыл бұрын

Thank You Sir. I LOVE your videos. I'm in the process of doing a frame off restoration of a 1950 chevy pickup. With this and your rear suspension videos give me the confidence that I can do this too.

@GarageFab Жыл бұрын

Nice. Sharing confidence is the whole goal of the channel. Best of luck, and lemme know if you need guidance. Cheers!

@mikekoss1i 4 ай бұрын

Bro! You knock it out of the park when it comes to show and tell! Keeping it simple, hot tips and explanations! I'm learning this for PVC pipe to add structural integrity for a 5'x6'8"work station covered in transparent 5 Mil plastic with a electric heater inside so I can slide it up to my house to replace threshold and sill plate. However, I need to level and pack sections with concrete which needs a minimum temperature to cure properly for durability and longevity! This will help, thank you!

@mikemccoy7379 4 ай бұрын

Great teacher! You've put alot of work into simplifying things so they cant be misunderstood. You have a real gift. Thanks for sharing. I'm not a car guy but the way you explain thinks makes it fascinating.

@GarageFab 4 ай бұрын

Thank you Mike! That means a lot to me. 🙏

@AlpacaRenee 15 күн бұрын

Great marking tips thank you so much!

@ricardoislas5701 2 жыл бұрын

Thank you. Best notching vid i have found by far

@GarageFab 2 жыл бұрын

Thank you, Ricardo! Very much appreciated. 🙏

@johnmathews3027 Жыл бұрын

Thanks very much for taking the time to show us how to do that good tricks and tips

@GarageFab Жыл бұрын

Absolutely. Hope it helps you sometime.

@michaelbrown1438 Жыл бұрын

I've only seen a few videos on knotching, but gut frustrated. Your descriptive explanation, and examples are amazing. I feel I can now better attempt to start a custom bike build. Thank you so much. Amazing.

@GarageFab Жыл бұрын

Yes! You absolutely can. And if you get stuck on something, I’ll try and help. Best of luck my friend.

@kingfishstacy 5 ай бұрын

Great video man. I also have a small garage and one week I might be wood working and the next metal fab. You show some good CLEAR little tricks that will help me out next time when doing tube work.

@Thatdavemarsh Жыл бұрын

Thanks for sharing these great tips!

@GarageFab Жыл бұрын

My pleasure, Dave. Hope they help you as much as they’ve helped me. Cheers!

@raymondsteele4142 7 ай бұрын

Nice . I have a step to repair on a friends truck . This has been very instructive .

@charlienewman9824 Жыл бұрын

I have been professionally fabricating for years and I learn every day, every tip even if one nugget of info Helps ! ( the sharpie tip was slick ) great instruction Thanks for taking your time to share Best Charlie

@GarageFab Жыл бұрын

Thank you, Charlie! That’s a good way to live. Always strive to be a know-it-all but always remember we are not. Cheers mate! I appreciate you.

@jimbojimson Жыл бұрын

I'm blown away by all the simple yet ingenious tricks I keep learning from this channel, there are so many projects I can use this on

@GarageFab Жыл бұрын

I’m running out of tricks! What happens then?! 😳 Just kidding. I’ve got a few more. Happy to help my friend!

@jimbojimson Жыл бұрын

@@GarageFab You'll think of more, but even if there are no more tricks there are always more projects

@GarageFab Жыл бұрын

Yes!! 🙌

@UnconventionalMetal 2 жыл бұрын

Genius idea with the marker!

@GarageFab 2 жыл бұрын

Thank you!

@johnkozero6842 Жыл бұрын

You do a excellent job notching tubing Thank you for all the tips

@GarageFab Жыл бұрын

My pleasure, John. Thank you.

@MrFafolaktik Жыл бұрын

Now for the killer ask !! How to bend DOM at home cheaply ....? Great content as always !!

@GarageFab Жыл бұрын

Interesting question, Stephane. This one would be going back to my roots. I now have a super spendy bender, so cheaply isn’t an option anymore. I am looking for some ideas for shorter videos so I might pick up a Harbor Freight bender and see what I can do with it. 🤔 Thank you my friend!

@MrFafolaktik Жыл бұрын

@@GarageFab Much appreciated!! Any content you can make would be very useful as your explanations and production are top notch (see what I did there 🤭😆) !!!

@dopedreamz Жыл бұрын

I bought and repaired a stick welder last year, this video will enable me to do my own exhaust work with the tools I have! Thank you for taking the time

@GarageFab Жыл бұрын

My pleasure! Best of luck my friend.

@toddkennedy7623 10 ай бұрын

This video was very helpful and informative, one of the best tubing joint cutting seen yet.

@GarageFab 10 ай бұрын

Thank you, Todd! Happy to be of service.

@OldYorkie-mi4ki 10 ай бұрын

Great video thanks for sharing

@options1369 5 ай бұрын

Thank you, very helpful.

@NeffTattoo 5 ай бұрын

very informative! Thanks!

@immanutt4442 Жыл бұрын

Thanks a Mint for another jolly good tutorial !!!

@GarageFab Жыл бұрын

My pleasure.

@RoninJeremy Жыл бұрын

Thanks, just started Fabricating. Very good tips.

@GarageFab Жыл бұрын

Nice! How’s the new hobby going so far?

@RoninJeremy Жыл бұрын

@@GarageFab Semi retired, thanks for asking. Made a tractor cab, might not be square but close enough to keep the snow and rain off. Planning a outdoor woodboioler for the summer. thanks for the tips will follow up on some more Vids. cheers!

@Hnkka 10 ай бұрын

Thank you! I did build rollcage for my folkrace car :)

@GarageFab 10 ай бұрын

Nice! Sounds like a good time. 🙌

@vikitheviki 3 жыл бұрын

Clear and precise! Just what I was looking for! Subbed!

@GarageFab 3 жыл бұрын

Thank you! Pleased to have you. See you again soon. 🍻

@markjames9205 10 ай бұрын

Learned something today. Thanks.

@GarageFab 10 ай бұрын

Mission accomplished! Thank you, Mark!

@bigleroy753 Жыл бұрын

I fabricate, repair and weld all day every day on farm and construction equipment and I am learning many many little nuggets of info and tips from you. Thanks.

@GarageFab Жыл бұрын

That’s awesome to hear! I feel like I could probably learn something from you as well.

@nexora326 Жыл бұрын

Thank you so much for that video. Now I can easily make my control arms for my car by using templates. And thanks to you, I found a website thats calculate every values I need for notching. Big thanks to you !

@GarageFab Жыл бұрын

My pleasure my friend! I’d love to see what you create! Hit me up on Instagram @GarageFab I’ll be starting my own custom control arms in a few weeks! 🙌 Best of luck!!

@brenkeenan8892 2 жыл бұрын

Genius. That’s all I can say. You’re a genius ! Thank you.

@GarageFab 2 жыл бұрын

Thank you, Bren! Your kind words are greatly appreciated. 🙏

@lisaleedavidson Жыл бұрын

Great instructional video.

@GarageFab Жыл бұрын

Thank you, Joel. 🙏 Cheers!

@JavierDrWeld Жыл бұрын

I thought I knew this stuff until I watched your videos, your tips and tricks makes it so easy.

@GarageFab Жыл бұрын

Don’t listen to me. I can’t be trusted!!

@toddkennedy7623 10 ай бұрын

That was awesome I've always just cut and cut til I got close then welded it up

@GarageFab 10 ай бұрын

Whatever gets the job done! Lemme know if this works out for you. 👊

@barry7608 Жыл бұрын

Nice to see a bit of precision in these vids thanks very helpful

@GarageFab Жыл бұрын

Thank you, Barry!

@bradleyb5633 Ай бұрын

Thank you! This was awesome and very helpful

@GarageFab Ай бұрын

Happy to be of service, Bradley. Lemme know how it works for you in the real world. 👊

@garyyorke1080 3 жыл бұрын

Pretty darn straightforward. Subscribed to see more

@GarageFab 3 жыл бұрын

Thank you, Gary! 🙏 Glad to have you. Here’s to a productive week. 🍻

@ericchevalier74 2 жыл бұрын

Thanks for sharing.

@GarageFab 2 жыл бұрын

My pleasure!

@Davincisgarage 10 ай бұрын

Thanks for the tips bro!! Its helping a lot.

@GarageFab 10 ай бұрын

My pleasure my friend! Thanks for watching. 🙏

@bluesman6955 Жыл бұрын

Thank you for making a very well produced video. You shared some great tips.

@GarageFab Жыл бұрын

Thank you for watching! I’m happy to be of service.

@tonywilkes1781 2 жыл бұрын

Very simple ,but very effective 👍

@GarageFab 2 жыл бұрын

Thank you, Tony! You are appreciated. 🍻

@dreammakergarage1133 2 жыл бұрын

Really like your teaching style. Learned a lot from this video.

@GarageFab 2 жыл бұрын

Thank you my friend! Happy to be of service. 🍻

@J1RM 10 ай бұрын

You made it very simple compared to all the other videos

@GarageFab 10 ай бұрын

Thank you my friend!

@FilterYT 6 ай бұрын

Nice, thank you!

@douglas4200 Жыл бұрын

Great tips bro, love that little marker trick!

@GarageFab Жыл бұрын

Thank you, Douglas!

@lloydrmc Жыл бұрын

Bravo explaining a process in a way that leads me to believe I could get acceptable results myself, (per usual)

@GarageFab Жыл бұрын

Haha! You definitely can. With a little practice and preferably no caffeine jitters.

@justinsmith8383 2 жыл бұрын

Great job with the notching and the video editing… watched all the way through and subscribed!

@GarageFab 2 жыл бұрын

Thank you, Justin! You are appreciated. We’ll be seeing you around!!

@alinaqi4557 2 жыл бұрын

Wonderful tutorial, great thanks.

@GarageFab 2 жыл бұрын

Thank you, Ali! 🙌

@nipponshark1 Жыл бұрын

Thank you 🙏 you just saved me a lot of money

@GarageFab Жыл бұрын

Happy to help! Let me know how things went!

@dirtyburd71 Жыл бұрын

I used the same method for making sheet metal tees at work at an HVAC shop. Layout takes too long for quick fitting construction! What a time saver!!!

@GarageFab Жыл бұрын

If it works, it works! 🙌

@kellyjones334 3 жыл бұрын

Great video..you have a great way of explaining things.

@GarageFab 3 жыл бұрын

🍻

@oBseSsIoNPC Жыл бұрын

There are some stores that sell notching templates or they can be ordered, but actually going through the motions is just as important for different angles and fitting different size pipes or tubes. Best video on YT because you actually show how long it takes to make the notch and point out the difference between DIY and pro tool.

@GarageFab Жыл бұрын

Thank you Dan! Very much appreciated. Are you familiar with blocklayer.com? If not, there’s a pretty fancy tube notching template program there. Check it out!

@oBseSsIoNPC Жыл бұрын

@@GarageFab I am familiar now, thanks for sharing the link. One can never have enough resources for toys, tools and inspiration!

@brentmcknight5344 Жыл бұрын

Loved that. Awesome video mate. Probably one of the best fab videos on KZfaq

@GarageFab Жыл бұрын

I’m honored! Thank you Brent. 🙏 Cheers!

@jimlarkin8392 2 жыл бұрын

Your videos are really great thank you very much ,so much really gteat information, and your personality and teaching technique and delivery are tops ounce again thank you very much ,I am really glad I found your channel

@GarageFab 2 жыл бұрын

Thank you, Jim. I’m glad you found the channel as well! Your kind words are appreciated. See you in the next one! 🍻

@leslieaustin151 Жыл бұрын

Thanks, that was very instructive. I’m going to watch it through again, right now. Les in 🇬🇧 UK

@GarageFab Жыл бұрын

Thank you, Les! I appreciate your time my friend.

@leatherbycrowfoot 2 жыл бұрын

H there. So this is such valuable information. I've just started building Recumbent Bikes with round 2 inch and inch and a half round tubular steel. Your video is invaluable. Thanks.

@GarageFab 2 жыл бұрын

Thank you Murray! Your words are appreciated. Good luck with the bike journey! 🍻

@sandyt4343 2 жыл бұрын

That’s about the best video of the series of notching that I’ve seen yet. No show business , just clear concise and thoroughly understandable instruction. And the narrator should do voice overs because rather than having to pot town the vocal portion, the voice quality is unusually good. Great job all around

@GarageFab 2 жыл бұрын

Thank you! That means a LOT. I attended a single voice over course and I was told I’d need a lot of work before considering a career in the field. That was pretty discouraging. I appreciate you! Cheers! 🍻

@sandyt4343 2 жыл бұрын

@@GarageFab I think it’s important to never take the option of any one person with more weight than than what it is, the option of somebody who could be completely wrong. Meryl Streep was told that she would never make it in the movies because she just didn’t have a look. You can believe that somebody’s eating their words after that opinion as well. I like to believe I’m a very discerning voice critic and I think they were way off and their assessment. I certainly would’ve not even thought of making a comment about it ,had it not stood out as unique tonal quality and enunciation

@GarageFab 2 жыл бұрын

I agree with you totally. My skin has gotten thicker over the last year dealing with haters. I’d recommend KZfaq to anyone that struggles with self worth or a lack of confidence. Negative opinions loose their sting after a while. Thank you again. 🙏

@roberthowland4503 2 жыл бұрын

I like the way you think it's right on thanks

@GarageFab 2 жыл бұрын

Thank you, Robert! 🙏

@fredastaire6156 9 ай бұрын

How do you only have 55K subs?! I found this video looking for notched piping and your video has got to be hands down the best one ove seen so far!! You've given me the confident to actually use pipe tube instead of square tube to fab a front bumper for my Subi!! A million thank you's good Sir!!

@GarageFab 9 ай бұрын

So very much appreciated, Fred. 🙏 The main reason is I don’t post often enough to make the KZfaq Algorithm happy. But I must say the growth over the past year has been more than exciting. So it’ll take awhile but I’m confident the channel will be huge in a few years. Thanks again my friend! I appreciate your time.

@pagingiera 2 жыл бұрын

Great bro I love every bit of your teaching thanks a lot

@GarageFab 2 жыл бұрын

Thank you, Patrick! I appreciate you. 🙏

@chadlegault9993 Жыл бұрын

We are having a good time too. How have I not heard of your channel since this week. Sheesh. Love it.

@GarageFab Жыл бұрын

Haha! I must’ve pissed off the KZfaq algorithm in a passed life. Thank you Brother!

@PaFREd0 2 ай бұрын

Awesome stuff 🙏

@RalfyCustoms 2 жыл бұрын

Great video, I've been fabricating for decades and you nailed it buddy, subbed 👍

@GarageFab 2 жыл бұрын

Thank you for the kind words my man! 🙏 I’ll be seeing you around. 🍻

@user-qv3ou8ie6q Жыл бұрын

omg nice! absolutley awesome. this video help me. thanks

@GarageFab Жыл бұрын

Excellent! Happy to be of service my friend. Thank you.

@MuratTYlmaz Жыл бұрын

hi, thank you these knows... I'll be need it. thanks.

@GarageFab Жыл бұрын

You are welcome, my friend!

@Justforfun-ek7et 11 ай бұрын

Thank you sir for all this invaluable information! Got yourself a new subscriber!

@GarageFab 11 ай бұрын

Thank you my friend. Thrilled to have you! See you in the next one.

@MOVIMKR7 Жыл бұрын

Great teacher

@GarageFab Жыл бұрын

Thank you, Warren! 🙏

@turboflush 2 жыл бұрын

Great video. Keep the videos coming. Video presentation and information is spot on. I hope your channel continues to grow.

@GarageFab 2 жыл бұрын

Thank you my friend! The recent surge in growth has gotten me pretty excited for the future. Your words are always appreciated. 🙏

@stevecastaneda4425 4 ай бұрын

Thanks & very helpful to DIY like me.😊

@GarageFab 4 ай бұрын

Thank you, Steve! Happy to be of service.

@showmeez Жыл бұрын

Excellent video production and great content, subscribed. Teaching myself to weld and this has helped immensely with my current project.

@GarageFab Жыл бұрын

Nice! 🙌 Thank you my friend. Thrilled to have you. See you in the next!

@ProtonFilms_Mark 8 ай бұрын

I think I will 3d print myself some templates for this purpose. Colour code them too. Neat idea, thanks for the inspiration.

@shedenvy691 Жыл бұрын

Great video I really enjoyed watching and learning.i will definitely be buying some tube and making some templates.

@GarageFab Жыл бұрын

Yes! Lemme know how things go!

@danielfuks Жыл бұрын

what a great video, thanks a lot

@GarageFab Жыл бұрын

Thank you, Daniel! My pleasure.

@MohammadUmar329 2 жыл бұрын

Excellent. 10/10

@GarageFab 2 жыл бұрын

Thank you, Mohammad! 🙌

@frankm8533 2 жыл бұрын

Nicely done very good explanation and tips

@GarageFab 2 жыл бұрын

Thanks Frank!

@guyfranks4354 3 күн бұрын

Aaron, thanks for the great info on notching. I'm a new subscriber and I find your videos very helpful.

@thahoustonbassrunnaz4389 2 жыл бұрын

Great video! 🙏🏾

@GarageFab 2 жыл бұрын

Thank you, my friend!!

@williamfolk3099 Жыл бұрын

I am a complete Novice, This is a very detailed and concise Instructional process. The knowledge of the 1/4 of the tube diameter resolves tons of trial and error. Fantastic information great job! Very clear and the sequence of information really makes the process make more sense. Thank you Sir!

@GarageFab Жыл бұрын

Excellent! Happy to be of service, William. Lemme know if the info is still good when it comes time to do it yourself! Best of luck my friend.