How to safely APC rinse your car | car detailing tips and tricks

How to safely APC rinse your car | car detailing tips and tricks | Stay Slick

Рет қаралды 25,212

Күн бұрын

In this video I hope to squash the fear and misinformation surrounding performing an APC rinse on yours or your customers vehicles. We will be going over all the myths as well as the truths and how you can perform this step in 3 different ways.
FOLLOW STAY SLICK:
Instagram: stayslick559
Facebook: stayslickautodetail
Products We Proudly Use:
All links below are affiliate links meaning we receive a small commission without extra cost to you. We would greatly appreciate you purchasing through our links.
Ryobi 1800 psi 1.2 GPM pressure washer: tinyurl.com/36u549py
P and S Xpress Interior Cleaner: tinyurl.com/2prpamff
Mirror Finish Touchless: tinyurl.com/2mdujcj9
Use Coupon Code “stayslick” for 10% off your order
Super towel Microfiber towels: tinyurl.com/yym4h3kh
Cerakote Headlight Kit: amzn.to/3GdhrFF
Detail Factory Brushes: amzn.to/3Gjep2T
McCulloch MC1385 Steamer: amzn.to/3rJ9Sms
Chemical Guys Fabric Clean: amzn.to/3GmMUFw
MTM PF22.2 Foam Cannon: amzn.to/3rIFxV8
Uberflex 50 ft pressure washer hose: amzn.to/3lDIxyc
MTM SGS28 Spray Gun: amzn.to/3Ez0sNJ
Active VE52 Pressure Washer: amzn.to/3ouYqbR
The Rag Company The Gauntlet drying towel: amzn.to/3pziAAT
Chemical Guys Tire Kicker Tire Shine: amzn.to/3GkE3En
IK Pro Foam 12 Foam sprayer: amzn.to/3Dr1b25
SuperClean Degreaser: amzn.to/3ouYQyX
P&S Bead maker Paint Sealant: amzn.to/3rNHzTX
Detail Guards Dirt Lock: amzn.to/3lJku0y
Bissel Set clean pro Carpet Extractor: amzn.to/3IrmCnz
The Rag Company waffle weave glass towels: amzn.to/3EvwwCk
Stoner Invisible Glass: amzn.to/3Dy1fx0
Chemical Guys Mr Sprayer: amzn.to/3lDoVdd
Maxshine M15 Pro Dual Action Polisher: amzn.to/31u1v3s

Пікірлер: 211

@salman13 11 ай бұрын

We might never meet but trust me, a lot of noobs appreciate you sharing the wealth. Specially in these tough times.

@StaySlick 10 ай бұрын

That’s why I do it. Thank you.

@MirandaDetailing 2 жыл бұрын

Dude! Excellent explanation on APC rinsing! Perfect logical points you brought out! So glad other detailers are using these methods and disproving the dogma of some detailers!

@StaySlick 2 жыл бұрын

Yes and thank you for being the reason I know about apc rinsing.

@frankyfreedomsp8974 2 жыл бұрын

When are u making one about apc always watch your video as well

@StaySlick 2 жыл бұрын

Phil has made quite a few featuring apc rinsing

@MirandaDetailing Жыл бұрын

@@yukonstriker1703 True...However, I get the most questions on this subject of pre-washing. So it's awesome that fellow detailers stay on point and discuss these methods so others who need help can understand them easily. 👍

@MirandaDetailing Жыл бұрын

@@frankyfreedomsp8974 kzfaq.info/get/bejne/idVhiJurvJjIc2g.html kzfaq.info/get/bejne/mtJhaa573q-VpmQ.html

@grandmasterkevv 2 жыл бұрын

Thanks for the tips! Greatly appreciated. Keep up the good work I'll have to try this on my next detail. I've also seen Wilson Auto Detailing put Super Clean into his foam cannon together with the snow foam to "supercharge" the foam

@StaySlick 2 жыл бұрын

Yes. Luke had some great videos.

@terryjohnson8473 2 жыл бұрын

Stay slick there was a great video that you put out today you as always you put out some great videos you go in great details with explain it step-by-step. For now on I will be using a CP rents on all the vehicles I do here in the DMV. Keep up the good work congratulations on your work and keep getting those subscriber’s to your page. Terry from the DMV.

@StaySlick 2 жыл бұрын

Thank you terry im glad you’re getting some value from the videos. As a show of appreciation I would appreciate a discount on my tags or a smog certificate and a set of tags. I have a check engine light.

@RicardoRuiz-mk4pj Жыл бұрын

Truly great information here. I too have been scared off by what other people say about APC pre wash, but thank you for your assurance and guidance

@StaySlick Жыл бұрын

No problem brother I hate saying use common sense because sometimes it sounds like you’re saying the person is stupid but I really think it means is is don’t overreact or create an issue. That’s not there. People are so afraid to experiment and I think experimentation is what gets us to the level that we are at. I would experiment in different temperatures in all different types of surfaces and just see what results you get.

@unleashingalpha9279 2 жыл бұрын

Great video and as always, great content. Your topics and video format is easy to understand without taking 30 minutes plus. Super informative. Been seeing this a lot lately and maybe you can consider making a video about this in the near future as I’m sure it would shed some major light. APC on interior panels? Good, bad, yes, no and why? Thanks again for the knowledge and for the super dope content. Stay Slick!

@StaySlick 2 жыл бұрын

Right on thank you sir and thank for the idea.

@shannajones9014 2 жыл бұрын

Great job, Mr. Slick! I liked and subbed and look forward to exploring your catalogue. Thank you.

@StaySlick 2 жыл бұрын

Thank you shanna I really appreciate the support. Stay Slick 🤙🏽

@bensantos4244 2 жыл бұрын

Sound advice 👌, and great tips. Just know what you are doing. Stay slick!

@StaySlick 2 жыл бұрын

You got it. Stay Slick My Friend 🤙🏽

@superstring101 Жыл бұрын

Great video. Thanks!

@Dineskii Жыл бұрын

Wish I found you earlier. Finally turning my hobby of detailing into a business and watching all these detail videos have really complicated my detailing process. Just need to have more fun like you said👍 You got yourself a new sub stay blessed

@StaySlick Жыл бұрын

Haha yea I went through that too it’s unfortunate. Everybody wants to make Detailing seem like a science so they look more “Skilled”

@andrewzazaian4688 Жыл бұрын

Wow what a great video I was afraid to try it but after I saw your video I used it on my car here in Michigan that had tons of road salt on it and all's I can say is OMG it totally cleaned all of it unlike other pre-wash foams you made me a believer thanks a ton and keep up the great work

@StaySlick Жыл бұрын

Right on brother I’m glad it worked for you. You just Gotta try your best to make sure it doesn’t dry on the paint that’s really all you got to worry about. Dilute it 4:1 or 10:1 depending on the level of grime.

@rayzwashndetail9050 2 жыл бұрын

Another great video Gary G gotta stay slick 👍🏻

@StaySlick 2 жыл бұрын

Always always before you do anything else……Stay Slick 🤙🏽

@ddautodetailing 2 жыл бұрын

Great video. I'll be doing this process on an upcoming ceramic coating I have. Stay Slick!

@StaySlick 2 жыл бұрын

Right on man Stay Slick 🤙🏽

@David-Godin 2 жыл бұрын

Great video. Smash the dogma. Your videos are quickly becoming a favorite of mine. I like your story and how you keep things real. Keep up the good work

@StaySlick 2 жыл бұрын

Thank you man that’s very kind of you. I’m glad I’m delivering what you guys want. Stay Slick 🤙🏽

@georgecarousos6735 2 жыл бұрын

Great video and explanation!! Well done.

@StaySlick 2 жыл бұрын

Thank you sir

@jpwill7966 Жыл бұрын

Solid video and as many have stated, excellent explanation!

@StaySlick Жыл бұрын

Thank you 🙏🏼

@noobfisherman1626 2 жыл бұрын

Great presentation as always brother. Keep up the good work.

@StaySlick 2 жыл бұрын

Thank you sir. Stay Slick 🤙🏽

@kashmulatx Жыл бұрын

Thanks for the game Gary! In this Texas heat, I've never tried an APC rinse in fear but I gotta try these tricks. I usually spray in a designated area then rinse, but I wanna try it in a foam cannon.

@StaySlick Жыл бұрын

There you go. Experimentation is key to finding your groove.

@jorgenvonstrangle000 Жыл бұрын

I recently started using APC, had some dirty dirty cars and wondered why, after 6 years I never risked it. Had someone give me a bottle of LA’s apc from dollar tree once and didn’t use it. I hsed some APC from Adams Polishes recently and omg felt so much better while working. Much faster for those dirty dirty cars. Obviously adding on protection afterwards as well which comes out nicely too

@sergiorubio5273 2 жыл бұрын

Thank you for this great information!!!

@StaySlick 2 жыл бұрын

Yessir

@jules198625 2 жыл бұрын

Great video , i usually use carpro lift and then contact wash

@StaySlick 2 жыл бұрын

Yep that’s a good one too

@777AndrewR 2 жыл бұрын

Great VIDEO! Don't like spraying apc with foamer on paint it leaves streaks on the paint for some reason probably traffic film issues so gonna try it in foam cannon with soap see what happens.

@StaySlick 2 жыл бұрын

Yes sir I would do a full vehicle apc rinse then if youre getting streaks. Also make sure youre not missing anything while doing your contact wash. I notice if I’m rushing I get that too.

@josephrottina1901 2 жыл бұрын

Great information brother as always.👍🇺🇸🇺🇸

@StaySlick 2 жыл бұрын

Thank you sir. Stay Slick 🤙🏽

@traviscrown9189 6 ай бұрын

I saw one my local guys doing apc rinses. Miranda detailing. Now I use super clean at 10:1. Works un real well. Also the msn from Koch chemie is great at 30:1!!

@allendavis6714 Жыл бұрын

Thanks for the tip

@Zeuqzav01 Жыл бұрын

Thank you! I have seen that you can't use super clean because it will eat the clear coat and cause marring and xyz. But I used it on my engine bay and wasn't very careful with it, I even sprayed the painted parts on the bay, with awesome results, so maybe now I will try this method on rocker panels and wheel wells! Thank you very much for this video!

@StaySlick Жыл бұрын

If it makes you feel more comfortable just dilute it 10:1 to make it a light cleaner

@frankyfreedomsp8974 2 жыл бұрын

1st and thanks for all these tips 🙏

@StaySlick 2 жыл бұрын

Absolutely. Thank you sir.

@TheFast6861 4 ай бұрын

Apréciate your video brother god blessed you

@ositoandhisadventures Жыл бұрын

Great video I definitely took something from this!

@StaySlick Жыл бұрын

Glad to help brother

@viperrcr 11 ай бұрын

Thank you so much about explaining the dilution ratio math! That just made everything so much easier! I previously used a calculator online to get the info but never though much about the math. I love it! Just subscribed! If using SuperClean in sprayer/foamer I understand 4:1 is probably best but if I am using a foam cannon for APC rinse using SuperClean, should I go 3:1 since it is going to be diluted further by the water from the foam cannon?

@BrotherLead 7 ай бұрын

Hope you find this reply but I would recommend figuring out your PIR (Panel impact ratio) if you’re using APC in a foam cannon. This ensures you’re using enough chemical in your foam cannon to ensure you’re getting the results you desire as the water flowing through when in use dilutes it.

@user-fc3yb5xy5s Жыл бұрын

Thanks brother for the practical and common sense…detail industry got everyone out here confused

@StaySlick Жыл бұрын

Absolutely. Not a problem.

@blackpanda7612 3 ай бұрын

Excellent video. Can a little bit of APC in a foam cannon be used as a weekly wash to boost the cleaning power of your existing foam soap?

@kbgt1523 9 ай бұрын

I tried apc today for the first time without knowing anything about it. I don’t know how much I diluted it I just eyeballed it but that’s the fastest I’ve ever seen bugs come off of the front of my car. They had been baked on for awhile because the car was at my in-laws for a few weeks and I detailed it today and I was blown away. Even the road grime dissolved in less than 10 seconds

@BrotherLead Жыл бұрын

Thank you mate! Cheers from Australia! 🍺

@StaySlick Жыл бұрын

Thank you brotha much appreciated.

@moneyparhar 2 жыл бұрын

I use superclean. Here in NY after snow Strom I use full strength in foam Canon to wash undercarriage of my daily .I use 1:4 in foam fanon to wash lower body panels and rinse after 5 minutes not in direct sun. Works great. Superclean is best. One thing in notice that superclean looses it's color in spray bottle when diluted 1:4. Not sure why. Only in spray bottle

@TheHobbyDetailer Жыл бұрын

Great video. Thank you for including different ways to use the product! Exactly what I was looking for. Is it ok to spray the vehicle before a pre-rinse or should you spray water, apc, then rinse again before foam?

@StaySlick Жыл бұрын

Hey brother, thank you for watching you know it really depends on the weather. If you’re not worried about the APC drying on the vehicle you can go ahead and spray it down first without pre-rinsing but I would only let it dwell for about 30 seconds or so if it’s hot outside, I would definitely prerinse with water.

@nightdaychannel828 Жыл бұрын

Enjoying your videos! Question for you: since most pressure washers dilute the watrer/soap at a 10:1 ratio, could you use Super Clean at full-strength in a foam cannon so that it automatically dilutes it to a 10:1 ratio?!?

@StaySlick Жыл бұрын

That’s a good question. I usually still dilute it at least 4:1 in the foam cannon

@allendavis6714 Жыл бұрын

THANKS FOR THE VIDEO

@StaySlick Жыл бұрын

Not a problem

@CC-iz1yg 2 ай бұрын

What tip on the IK sprayer that you have foams ?? I am having trouble with it

@David-ym4fo 11 ай бұрын

Hi, so no problem in direct sunlight using super clean in a spray foam canon 4-1 for no longer than 30-60 seconds? If the vehicle has lots of grime apc is recommended? If not to bad just stick with a pre foam wash? Thanks

@cartailincautodetailing5465 2 жыл бұрын

When I apc rinse a whole vehicle with super clean in a foam cannon I usually use it 1:1 since it’s gonna dilute more with the water coming out werks like a charm but Thnks for the knowledge

@StaySlick 2 жыл бұрын

No that’s good knowledge. Good to know I will try that. I haven’t had a situation where the fourth one didn’t work but I want to try that anyways now that you said it

@rudolphnash7471 6 ай бұрын

I have super clean and I want to do a pre treatment prior to the contract wash is this safe? And also after I complete the contract wash/dry phase can I just add a spray wax?

@tropicole3437 Жыл бұрын

Nice. Where I live, automotive APC's are expensive. But they locally produce an APC stupid cheap in comparison called "Sacató". Not sure about other ingredients, but PH level is same as Super Clean. Good enough for me👌🏽

@robertmcdonald6091 7 ай бұрын

After apc rinse, would it be ok to use something like armor all ceramic soap for the contact wash?

@jerryguillaume6435 Жыл бұрын

Hey Stay slick! Thanks for teaching us your methods. I’ve been using this method and it works great but someone who’s been detailing longer than me told me it’s not safe on chrome parts, and chromes wheels. Is that true?

@StaySlick Жыл бұрын

Only if it’s raw aluminum.

@ferraowens Жыл бұрын

man thanks for just keeping it real and not turning fakeish like some people love the good honest content you are definitly one of my favorites

@StaySlick Жыл бұрын

Thank you very much I really appreciate that and I’m happy youre getting value from the content.

@lowridingtrucks88 Жыл бұрын

Cool video, 👍

@StaySlick Жыл бұрын

Thank you bro

@grandmastert01 Жыл бұрын

i always worried about the super clean ratio so thank you i will try the 4:1 ratio

@StaySlick Жыл бұрын

Yes sir 4:1 or 5:1 are great ratios.

@grandmastert01 Жыл бұрын

@@StaySlick thank you

@hector8147 2 жыл бұрын

Hey Slick! one think I noticed right away at the beginning of your video is that you are using the vortex G2 foam cannon. Wanted to ask how you would compare it to the MJJC? I only ask because according to G2 it gets "75% more foam than the competition". Just your 2cents. Thanks a lot man keep up the great work!

@StaySlick 2 жыл бұрын

The one I’m using is white label meaning it doesn’t have a brand. It was poor foam at best so I did what I always do which is replacing the 1.25mm orifice with a 1.1mm and it got good foam after that. In my opinion it’s not that great. The two best foam cannons for foam are still the mtm pf22.2 and the MJJC foam pro. If it’s being rebranded I’m positive the manufacturer is either doing nothing and just making claims or they’re replacing the orifice with a 1.1 and then installing a filter with foam smashed in the middle of the metal. You can buy these filters on dtlrsupply.com

@hector8147 2 жыл бұрын

@@StaySlick gotcha thanks for the honestly and reply man. Happy Sunday!

@tomcolls9264 Жыл бұрын

Hi mate. I have a ceramic coated SUV. I generally use a bug remover and citrus foam wash (same retailer as the ceramic) before my contact wash. I'd considered using an APC (I have a gallon of Mothers APC) at 10:1 to hit my lower panels ,grill, roof racks, badges and window seals before going over with the Citrus foam. Would that be safe on the ceramics? I note you mention that it can degrade protection in this video. I also intened to hit the window seals, grill and badges with soft bristle detailing brush before rinsing. Thanks

@StaySlick Жыл бұрын

Yea that was referring to spray sealants and wax’s. An actual. APC won’t harm ceramic coatings as long as it’s diluted 4:1 or more.

@johncherry2163 2 жыл бұрын

One of the best videos I’ve seen about this, is this safe on ceramic coating? I have 2 work trucks that are ceramic coated but get pretty dirty. And the pressure washer don’t get it all off.

@StaySlick 2 жыл бұрын

Thank you I appreciate it. Yes ABC rinsing is safe on ceramic code of vehicles I was just deleted a little bit more than usual. For example I use super clean 4:1 for my APC rinsing but I might do 6:1 or even 8:1 on a ceramic coated car.

@johncherry2163 2 жыл бұрын

@@StaySlick thank you

@tubejim101 Ай бұрын

I really like Meguiar's Quick Interior Detailer Cleaner, but at $6 a bottle, it is expensive. Will Super Clean 10:1 get me the same results, and be safe on the interior?

@guzmansautodetailservices4449 2 жыл бұрын

Good information bro …. We have a problem with super clean that strip the paint on a very hot day but we fix it polishing the paint .. what do you think and pure red degreaser?

@guzmansautodetailservices4449 2 жыл бұрын

*Streaks

@StaySlick 2 жыл бұрын

I’ve only had super clean streak if it isn’t diluted enough. 4:1 minimum.

@jrjr8738 2 жыл бұрын

Thanks bro 😎

@StaySlick 2 жыл бұрын

Anytime brudda

@rudolphnash7471 Ай бұрын

Thanks!!!!!!!!!!!!!!!

@gerardhedgepeth3318 2 жыл бұрын

What foam cannon did you use for the APC? Like that design

@StaySlick 2 жыл бұрын

Hey brother I believe it’s called the grenade foam cannon. It was gifted to me.

@desi579 2 ай бұрын

Is (for example DIY All Clean the same as Super Clean Degreaser) all ApC the same?

@Kwharton66 Жыл бұрын

I will try that

@greenhat8178 Жыл бұрын

Not sure if I missed it, but what happens when it dries and how to fix streaking, or how to fix when it dries? Thanks for the video

@StaySlick Жыл бұрын

Hey brother usually you just re wet it and it clears up.

@waynejohnson3214 11 ай бұрын

I use Super Clean on my car 3- 4 times a week. I wet the whole vehicle, including rims and tires with it, then rinse off with a pressure washer. My car is clean all the time, with very little work. If I'm going to do a hand wash, I do so after the SC application and rinse. In the spring when bug splatter is bad, I use SC almost daily. The clear coat remains pristine because there's very little grit on it to cause scratches.

@alexsantana4247 Жыл бұрын

Quick question, when in the foam canon is it paint safe to use super clean throughout exterior of car diluted of course?

@StaySlick Жыл бұрын

Yes just make sure your solutions are correct and that it doesn’t dry.

@ItzF8aL 2 жыл бұрын

When stuff is still stuck on lower panels after apc rinse, could you hit it with apc again and scrub or should you spray foam and scrub?

@StaySlick 2 жыл бұрын

The idea of an APC rinses to do two things remove what it can and loosen up the rest. So in theory some stuff should come off and whatever doesn’t come off should be loosened up and safely removable with a wash mitt

@serranosmobile Жыл бұрын

i want a hat, how can i get one or buy one

@halldaddy7266 Жыл бұрын

Rockin' glasses!! 🎶 Please tell me what they are. I'm in FL so no fear of stealing your thunder. 😉 T H A N K S

@StaySlick Жыл бұрын

Honestly I don’t remember I think they’re just some cheap shades

@user-yb2tp4qf1r 3 ай бұрын

I live on the countryside so APC is a must for me. Lots of things fall over the paint and APC is the best safe way to remove them. Works great for bugs, fresh tree sap and sure, all kind of road grime. Not sure why most APC are advertised for the interior while it's great on exterior paint.

@fonzymtv9317 10 ай бұрын

Do you think a good 3 cap fulls of Super Clean added to my PH nuetral soap as a prerinse will be fine?

@StaySlick 10 ай бұрын

You can use it that way for sure.

@andrewzazaian4688 Жыл бұрын

Hey brother just a thought people are afraid to use APC because it is so basic PH. superclean has a pH of 13 but if you dilute it at 4:1 that's 20% APC and that brings the PH down to 8.2 in the foam Cannon as it mixes with water .as it shoots out so it's actually neutral pH by the time it comes out of the foam Cannon am I wrong in my thinking

@StaySlick Жыл бұрын

No your right man most people don’t know that the ph can be lowered by diluting it.

@Tundra_Guy Жыл бұрын

I've had APC dry on the paint and it left streaks that had to be polished off. Left it on for exactly 1 min and still left streaks. temp was 55 degrees and not in direct sunlight.

@StaySlick Жыл бұрын

Interesting. The only experience I have had like that was using a super heavy degreaser by mirror finish polished.

@jaredharbaugh8419 2 жыл бұрын

Do you have any apparel yet. I would love a shirt.

@StaySlick 2 жыл бұрын

I don’t but it’s in the works.

@mkygod 2 жыл бұрын

What's the best dilution ratio if i want to strip wax and sealant off the car?

@StaySlick 2 жыл бұрын

I never go stronger than 4:1

@mrdalekjd903 8 ай бұрын

What if i have a Wax or Sealant on my paint can super clean degreaser start to hurt and breakdown the protection?

@StaySlick 8 ай бұрын

Yes. Just dilute it more at 10:1 if you have some type of sealant on the paint.

@elinino5275 Жыл бұрын

Can you add some super clean to any foaming soap?

@StaySlick Жыл бұрын

Yes you can

@djrecklessralph6697 2 жыл бұрын

What is the red foam cannon you use

@StaySlick 2 жыл бұрын

I believe it’s called the grenade foam cannon. I’m not sure. It was gifted to me.

@dannysandoval5195 Жыл бұрын

Great APC tip with washing cars. Do you normally rinse the car first then apply APC or do apply the APC first then rinse?

@StaySlick Жыл бұрын

I always rinse first for a couple reasons: 1. to knock off any loose dirt That’ll come off with just the water. 2. To lower the surface temperature of the paint. 3. To keep the apc from drying prematurely.

@dannysandoval5195 Жыл бұрын

That's good info! Will keep that in mind.

@davidboyce6427 Жыл бұрын

How to remove red dye stain out of carpet in car. This pink stain came from Uber Wolfgang rinseless Wash bottle 😩. Any suggestions Stay Slick? Thank you in advance 👍

@StaySlick Жыл бұрын

I usually start with the p and s three step system ( terminator, carpet bomber, finisher ) if that doesn’t work then a dedicated red stain remover would be next. Also steam is a big help.

@user-fc3yb5xy5s Жыл бұрын

Does the apc prewash diluted to 4:1 degrade any sealants on the car?

@StaySlick Жыл бұрын

Yes it will. Reapply a topper or a drying aid recommended

@justincooper9488 2 жыл бұрын

Will super clean 10:1 degrade waxes or sealants?

@StaySlick 2 жыл бұрын

Honestly probably not. It’s pretty light at that dilution.

@DREKREY 2 жыл бұрын

is this only for unprotected vehicles? no sealants/wax/coatings on the vehicle yet?

@StaySlick 2 жыл бұрын

You can apc rinse a ceramic coated car but I wouldn’t recommend it on a vehicle with waxes or sealants cuz it may strip them off.

@JLocauto 8 ай бұрын

I noticed on black cars or platics it stains alittle sometimes

@perezautofreshdetailing55 2 жыл бұрын

I HAVE A 2 GALLON HOME AND GARDEN SPAYER, HOW MUCH DO I ADD WATER AND SUPER CLEAN ?

@StaySlick 2 жыл бұрын

If you have a 2 gallon sprayer realistically you only should use a gallon and a half so you have some headroom for air so if you filter it 4:1 you need 38 oz of super clean.

@salman13 Жыл бұрын

so this replaces iron and bug decontamination stuff?

@StaySlick Жыл бұрын

Not iron but bugs yes

@desi579 2 ай бұрын

How would I safely use APC if I had black plastic trim on the bottom part of my car? Without damaging the black color of fading it Pre maturly.

@joshuadwyer941 Жыл бұрын

I've noticed apc stains the the matte black trim on the door surrounds and pillars. thats from meguiars and autosmart. anyone else notice that issue?

@StaySlick Жыл бұрын

It can. Depends on the chemical and dilution of course.

@SwavyDetails Жыл бұрын

Is this method safe for cars with plastic trims?

@StaySlick Жыл бұрын

Yes indeed

@jonruelas1011 Жыл бұрын

What up Gary G . Will an APC rinse take off a wax or sealant?

@StaySlick Жыл бұрын

Most of the time yes

@austinpasta8298 9 ай бұрын

Why when I use super clean degreaser I rub the paint with my hand after I clean it and it comes off

@StaySlick 9 ай бұрын

Either an issue with the paint or you’re not diluting it.

@469christian Жыл бұрын

💯💯💯

@StaySlick Жыл бұрын

🤙🏽

@jonathanmariani5627 2 жыл бұрын

Can apc fade the pillars on the exterior doors?

@StaySlick 2 жыл бұрын

No sir as long as you stick to your dilution ratios and try to keep the vehicle wet at all times while using the apc

@BrandonBuilds-pf1hz Ай бұрын

you spray super clean on a wet panel??? @StaySlick

@alejandrodominguez3172 2 жыл бұрын

Will super clean strip waxes and sealants ?

@StaySlick 2 жыл бұрын

4:1 or stronger will degrade coatings

@alejandrodominguez3172 2 жыл бұрын

Would you recommend a 4:1 if I want to completely remove any current waxes ? I want to clay bar it as well and use an iron remover to add daddy o paint sealant

@StaySlick 2 жыл бұрын

Yes iron remover and super clean will definitely get most protection off. Just make sure the water behavior is flat. No beading or sheeting

@Garzaautodetailing 2 жыл бұрын

Dawn dish soap in a foam cannon works really well , i use that to strip off current waxes/sealants - Detailer out in Texas 🔥

@StaySlick 2 жыл бұрын

Dawn dish soap is probably the worst possible thing you can put on your paint. Especially if youre using it for the contact Wash. there is zero lubrication.

@peterrudy9207 Жыл бұрын

As I heard , rinse vehicle with simply water to cool surface . Then to spray whatever APC you want and rinse off .

@StaySlick Жыл бұрын

You can do it dry if the weather allows for it. If it’s in direct sunlight I would recommend spraying it down first.

@peterrudy9207 9 ай бұрын

@@StaySlick ok

@Pearl3Drummer Жыл бұрын

Whats the ratio for the APC?

@StaySlick Жыл бұрын

I explained a few times in the video. 4:1 or 10:1

@MiamiAutoShine 3 ай бұрын

Isnt the point of a apc pre rinse to avoid sending dirt flying and scratching the paint? I dont get the point of pressuring waahing it

@snbforever Жыл бұрын

Hi, just want to update my experience. Meguiars super degreaser from a foam cannon works the best: use it about 10 to 1 ratio, probably a bit stronger, but definitely not 4 to 1, too strong in my opinion. Works much better than APC, removes bugs and other grime ect real good.

@StaySlick Жыл бұрын

That’s good man. I use super clean 4:1 everyday with exceptional results. Every body has their way. 🤙🏽

@MultiFisherofmen Жыл бұрын

Meguiars super degreaser is fantastic product from what I’ve heard but have you compared against super clean? Is it worth the $35-$40 per gallon when compared to $8.99 a gallon for SuperClean ?

@StaySlick Жыл бұрын

Super clean is amazing. Other people will bash on you for using it but don’t pay them any attention.

@MultiFisherofmen Жыл бұрын

@@StaySlick I’m very surprised at the amount of business I’ve been getting in a couple RV parts and truck stops in my area. I can’t leave those places without having people come up and ask if I can clean their rig next. I’ve only been doing this part time for about 5 weeks. Just recently learned about this method and I’m blown away by how much time and effort it is saving me. I was told by one customer that I wasn’t charging enough. I’m confused on what to charge. I have been getting $100 for a wash which was taking me up to 3 hours to finish. After watching several videos like yours I’m wondering how long it should take. Washing is the easy part. Spray waxing and wiping down is what take me so long.

@wayermane5069 Жыл бұрын

@@MultiFisherofmenthat’s a lot for $100 😮

@snbforever Жыл бұрын

What about Meguiars Super Degreaser?

@StaySlick Жыл бұрын

I haven’t used it yet.

@snbforever Жыл бұрын

@@StaySlick I have heard good things about it. I know it cleans Wheels very well, and am looking to use it in my foam cannon @ 4 to 1 as a pre clean.

@StaySlick Жыл бұрын

@@snbforever nice I’m a die hard super clean user. 4:1 as well.

@snbforever Жыл бұрын

@@StaySlick Will test it today and post results.

@snbforever Жыл бұрын

Meguiars APC is the winner.

@roberthunter1220 2 жыл бұрын

I wish I had done better in math class. Let's see, multiply 4:1 solution by ? Why cant we just mix 50/50? A lot easier. Oh, I like your videos.

@StaySlick 2 жыл бұрын

Lol I hear you tell me what size container you’re using and I will tell you how much product you need

@zenpink4517 Жыл бұрын

Wat would happen if you don’t diluted it any risk

@StaySlick Жыл бұрын

Yes it’s highly likely it would stain the paint and plastics

@zenpink4517 Жыл бұрын

Ok good to no thanks man

@fjoco1 2 жыл бұрын

Using super clean on bugs is way safer than scrubbing your paint and bumper to death.

@StaySlick 2 жыл бұрын

Absolutely.

@SUPERSID1968 Жыл бұрын

Don't pre rinse weaken the chemicals 🤔🤔🤔🤔 i never pre rinse just straight on with the a p c or t f r 👍👌

@matsudakodo 10 ай бұрын

And people on the internet are still afraid of Dawn dish soap. Myths need to die!

@takeovamxbc3403 2 жыл бұрын

This stuff will melt away the bird droppings

@StaySlick 2 жыл бұрын

Absolutely. It works amazing.

@takeovamxbc3403 2 жыл бұрын

@@StaySlick hey I had a question can I put a dressing on my 22 civic? Or what do you recommend

@StaySlick 2 жыл бұрын

@@takeovamxbc3403 what kind of dressing and where?