ever since you taught me the apc rinse and applying trim shine b4 protection saved me well over 45 mins just those 2 steps. I know I'm truly grateful 4 ur videos, tips and tricks, mentoring and most importantly ur friendship. b well good friend. ty again 4 EVERYTHING!!
@nicksdragon69292 жыл бұрын
I took your advice with SFN, GREAT product in the ik pro. I am sold on APC pre-wash. I know, I know, I was a vocal non believer at first, but now with my tail between my legs, I pubically please, mea culpa or simply put, I m eating my humble pie. 🤗😎👍
@MirandaDetailing2 жыл бұрын
Awesome man! Yeah we will go back and forth between using an apc or a high PH soap depending on the job. My fav is still the APC rinse since it works so well
@clintsaines92745 ай бұрын
Have you tried it in a foam cannon?
@MirandaDetailing5 ай бұрын
Hi. You mean the KCX Super Foam in a Foam Canon? It f so yes! It’s awesome. We use that for ceramic coated vehicles as a pre wash now.
@clintsaines92745 ай бұрын
@@MirandaDetailing ok thanks.
@justinrounds517 Жыл бұрын
A little tip I can give for any spray bottles and foamers. If you replace the plastic pickup tubes with flexible hoses, and weight the filter ends with stainless steel washers, you can turn the sprayers at angles without sucking up air since the weighted end will always be submerged. Makes wheels and tire wells much easier to hit. Works very well for interior bottles since you need to hit lots of different angles.
@MirandaDetailing Жыл бұрын
Awesome tip man!!
@annagraham6204 Жыл бұрын
The same pick up tubes in some of the better foam cannons, tornador w/solution bottle etc. challenge is finding tube long enough for larger bottles. Try taking the nozzle off any P&S 16oz bottle and pull back a bloody stump.
@bluegrasskid4835 Жыл бұрын
Which flexible hoses do you use?
@michellekempfsu2 жыл бұрын
Great video. I personally find that using the pump sprayer with the misting spray nozzle works great and uses less product than the foamer and the end results are the same. Keep it wet, work fast in the summer heat and the end result is a faster, more efficient job. Temps in my area are 94-100 degrees so the heat alone causes everything to dry quicker. Because of that, I spray one panel at a time and go at it quickly. I love my apc rinse. It is the way to go. No doubt!!
@MirandaDetailing2 жыл бұрын
Awesome! Yeah I have found that to be the case in some situations also. We go back and forth depending on the situation. Thanks for sharing! 😎👍🏼
@JoseAlvarez-rz6sl2 күн бұрын
That wasn't bad the Arnold voice 👌 😊like it.
@MirandaDetailing2 күн бұрын
😂👍
@muchachogrande20192 жыл бұрын
I hear the new APC from Phoenix E.O.D. foams up amazingly in a foam cannon. Maybe it'll be a new go-to pre-wash/APC rinse!
@MirandaDetailing2 жыл бұрын
I just got some also! Will have to try it!
@robertknapp8952 жыл бұрын
Love the video Philip 😄I tried the apc on my customer work truck I think it works but the carpet tire wheel well took a little longer but yea guys try it first Philip he's the man I love watching him they rock together as a team they booth have a great sense of humor thanks again 😺 Philip take care guys happy 4 th of july
@ddautodetailing2 жыл бұрын
You could really see the difference in gloss at the end there! 👍
@Invesibledetailer Жыл бұрын
Once again thank you for teaching us how to detail faster!!
@prestigedetailing98742 жыл бұрын
Hey Phil, you guys are doing a fantastic job!! Because of you guys we went ahead and updated our pre-wash method as well. I didn't really like the belt hamburger method too much nor did I really notice any difference then my previous APC pre-rinse method.
@Mdetailing2 жыл бұрын
Great video Phil happy independence day vacations in US. Much love from Greece
@millerdetailing41762 жыл бұрын
Another amazing video Phil always full of useful knowledge .
@NickVetter2 жыл бұрын
I have been using 3d presoak in a foam cannon. Pretty cheap at about $0.45 a wash. I like the big ik foamer but I can't convince myself to buy it yet. I usually do the wheels and pre soak outside then move into my garage and do rinseless since I have hard water. The presoak does such a good job breaking down contaminates I got off all the tar on my customers vehicle during the rinsless wash.
@MirandaDetailing2 жыл бұрын
Awesome! Thanks for sharing! 😎👍🏼
@njco4life2 жыл бұрын
Why dont u add a filter system? I use the blue TV filter and test my water with a water stick and it gives 0 ppm after 2 yrs I'm at 57 ppm so it's time for a new one.
@NickVetter2 жыл бұрын
@@njco4life it won't work
@ShineYourLightDetailing2 жыл бұрын
Jam packed with great information. That’s a lot of gunshots there Phil! thanks for the informative video! 👍🏼👍🏼
@greymark4202 жыл бұрын
Car looks wonderful Phil and Jess.
@chelsabailey10184 ай бұрын
Hi Phil. I am not a professional auto detailer. I'm simply a lady that ❤❤❤s her car and wants to keep it clean. I've been watching A LOT of car detailing videos for the best and simplest way to do that and I've found that the APC rinse/prewash is what works best for me. That said, I use either Super Clean or Purple Power with water as my APC rinse/prewash. For my contact wash, I mix 2 car regular car shampoos with Super Clean and water. Makes my car gleam!! For my next car wash, I intend to use Meguiar's Ultimate Compound with a polisher, do an IPA, then top it off with Turtle Wax's Graphene Flex Spray. Thoughts?
@MirandaDetailing4 ай бұрын
Hi! THats awesome! I'm glad that process works for you. your process sounds good! i would sub out the Flex wax with this this amzn.to/3xtcFoL then you can maintian it with the FLEX Wax.
@chelsabailey10184 ай бұрын
@@MirandaDetailing Hi Phil. Thanks for getting back to me. So, you're recommending that I use the Graphene Flex Wax as a topper for the Graphene To The Max Wax, right? I just want to make sure that I'm putting the right things on my car.
@MirandaDetailing4 ай бұрын
@chelsabailey1018 You’re welcome. Yes exactly!
@jeffreyrobert94602 жыл бұрын
IMO having a great pressure washer makes a big difference. Your AR is a spectacular machine. I want one but my rental only has a 15 amp circuit.
@MirandaDetailing2 жыл бұрын
Very true!!
@sixtysecondsofstephens23862 жыл бұрын
Top tip with the vaseline, my pump sprayers often leak. Going to try it out.
@m0th.shroommm5 ай бұрын
Loved the video and loved hearing the gunshots! Thanks for the content!
@dawondjones2 жыл бұрын
I love the combination of bead maker and dream maker
@miscellaneous5215 Жыл бұрын
I enjoy these pre-soak/prewash videos. Phil, do you think APC's are sufficient compared to the foaming products? Have you tried Bilt Hamber Touchless? I use Optimum Power Clean. I have a truck that sees off-road use. The foaming products, like Gyeon Foam, don't seem to work nearly as well as Optimum Power Clean and possibly other APC's.
@MirandaDetailing Жыл бұрын
Hi. Thanks. So we have found that our pre wash methods will change according to the condition of the vehicle and what service we are doing. For really nasty vehicles that we have not detailed in a while or first time customers we use a strong APC at 1:4 and do our APC rinse method. We have found that the snow foaming products even ones like Bilt Hamber don't clean as well as out APC rinsing methods. But that's just what we have found...other detailers have their methods that still work for them.
@davidminor12543 ай бұрын
I live in Texas and I purchased a 2023 Mazda CX-5 in November of last year. I want to keep it clean so I purchased different products and accessories. I don't have a garage to work in so I try to clean the car outside when it's not too hot. My method is to rinse down the car with the garden hose before using Griots red snow foam in their foam gun. Then I rinse that off with the garden hose before using SudsLab C1(?) car wash for the contact wash. Of course in the drying stage it seems I can't dry the water off before water spots form. So I purchased Griots water spot remover and the spray on rinseless car wash(?) to remove the spots and protect it. The problem I have with those 2 products is when drying it leaves an oily film. Should I switch to a different product since I can't avoid cleaning the car in the sun?
@MirandaDetailing3 ай бұрын
Hi. Are the water spots so hard after the rinse that using a quick detailer can't remove them? Usually if water spots are on a freshly washed and rinsed vehicle they are very superficial and can easily be removed with a quick detailer or a machine applied wax or sealant. Are you using the water spot remover while drying or using it after it's dried? I haven't used that one before so i don't what its like.
@matsudakodo11 ай бұрын
Looks good. Maybe foam it on with the cannon to cut a few more minutes off the process, if a gallon or so of water is available. All you need is one more bottle for the cannon. Then you can save the space from the IK foamer.
@MirandaDetailing11 ай бұрын
Hi. Thanks. Yeah that’s an option.
@trapcracker2 жыл бұрын
Have you ever considered a keg sprayer? Air pressure will last longer in them. They’re about the same price as IK sprayers if you build them yourself.
@MirandaDetailing2 жыл бұрын
Really?! Very interesting! Does it have a foaming tip also? Do you have any links to one you would recommended?
@stephen15032 жыл бұрын
@@MirandaDetailing detail kegs would be the big brand name on them. But they sell parts so you can build your own or buy a small used one. His channel has a video of him foaming 3 cars with 1 gallon of solution.
@MirandaDetailing2 жыл бұрын
@@stephen1503 Very cool! Thanks man!
@alloutcarwashanddetail2 жыл бұрын
Love the videos Phil definitely applying your tips and tricks to my business and have been getting awesome results thank you 💪🏾
@petebrandstrom1038 Жыл бұрын
Do the pre rinse since I saw it on your channel. Thank you!
@reyesmaria323 Жыл бұрын
First off - I'm learning so much from your videos, thanks! Quest: Could that small SPTA handheld polisher possibly be used with a cleaner polish as part of the prep process for a better bond before using a ceramic-based spray wax/sealant? Or is a full blown 8/15mm polisher much better for a cleaner polish?
@MirandaDetailing Жыл бұрын
Hi. Thanks so much! Yeah you could totally use that little SPTA polisher for very basic cleaner polishes, just to use as a prep.
@404notfound.....2 жыл бұрын
Another excellent video! I just picked up a new Ik former today @ appreciate the tips. I have a couple of bottles of both dreammaker @ beadmaker and will try combining the two. Tks phil & jess. 👍🇨🇦
@chrisw.70399 ай бұрын
That Schrader valve on that sprayer is a great idea. I was wondering if it is a particular type and does it have to have a nut on the inside to hold it or will it just hold being screwed in tightly with a generous amount of Teflon tape.
@MirandaDetailing9 ай бұрын
Hi. So the IK Foamer Pro 12 comes with it already. It’s pre installed. So you don’t have to worry about that.
@lisaogembo4732 жыл бұрын
George Orwell, animal farm! It may not be the original (I don't know) but that's where I heard of it first. Great book for all that never read it.
@MirandaDetailing2 жыл бұрын
Exactly! Very interesting especially with todays issues!
@nickvishnani39482 жыл бұрын
Hey Phill, what kind of hose are you using with your pressure washer. I’m looking to upgrade for a kink free experience. Thanks
@MirandaDetailing2 жыл бұрын
Hi. This is the hose we use, the 50Ft version bit.ly/3JpSt7r
@johns.8530 Жыл бұрын
Awesome video! Couple questions. Have you ever used Koch-Chemie - Green Star? Also, genius idea with the Schrader valve. What size hole do you drill to install the valve?
@MirandaDetailing Жыл бұрын
Hi. Thanks. Oh yeah. We use green start all the time. Love it as an exterior APC.
@IntervalePC2 жыл бұрын
From the novel 'Animal Farm' by George Orwell
@MirandaDetailing2 жыл бұрын
Exactly!
@vickyl7772 жыл бұрын
Great video as always and thank you for the tips! Apc rinse fan here. But the downside is on direct sunlight I do have some trouble since I’m working alone I have to work fast and with your method with the foam rinse with a high ph soap might just be a better alternative in those kind of situation. Will definitively give it a try this summer! Keep the good work Phil&Jess love your humour 🙌
@MirandaDetailing2 жыл бұрын
Thanks! 😎👍🏼
@timmumau59426 күн бұрын
What pressure washer do you recommend 🤗
@MirandaDetailing5 күн бұрын
We use the ARblue630 and love it! kzfaq.info/get/bejne/ibZ5a6qEtru9c6s.htmlsi=E4tawH8pjjWcHefV
@njco4life2 жыл бұрын
Love ur channel... What cordless polisher is that and how long do the batteries last?
@MirandaDetailing2 жыл бұрын
Hi. Thanks. It’s the SPTA cordless polisher. If you just spreading wax/sealants you can get 4+ vehicles. If you are doing a light polish or enhancement about half way around before you need to change the battery.
@careenthusiast5 ай бұрын
how many minutes before rinsing the pre wash solution? thank you sir for great tips 😊
@MirandaDetailing5 ай бұрын
Hi. That all depends on how hot it is and if it’s in direct sunlight. It’s not about minutes it’s about watching the paint and making sure it doesn’t dry completely. It really only takes 30-60 seconds then rinse off.
@careenthusiast5 ай бұрын
@@MirandaDetailing awesome thanks sir.. looking forward for more tips from you 😊.. love your channel from san francisco ca ✌️
@numberoneJATT2 ай бұрын
if I use a pump sprayer for APC, can i rinse it out thoroughly, and use same pump sprayer for spraying rinseless wash at a later date?
@MirandaDetailing2 ай бұрын
Hi. Oh yeah that’s totally fine.
@numberoneJATT2 ай бұрын
@@MirandaDetailing thank you for the speedy reply
@westechyt2 жыл бұрын
It is funny because I watched your previous video about the APC rinse this morning and then you released an updated version this afternoon. Does using APC rinse strip wax or sealant every time you use it? Great video and really enjoy your content!
@MirandaDetailing2 жыл бұрын
Hi So using a strong apc or soap for maintenance washing is not what we do. These methods are only for the initial cleaning only. For maintenance washing you only need to rinse and wash per usual.
@Mogsy28uk2 жыл бұрын
cracking job both of you, Mountain Grey is a good MB colour. I thought the alloys were bronze too.....😂 Just got some P&S Dreammaker, must try a combo mix, thanks for the idea (not a real fan of BM, but have some left over).
@Mogsy28uk2 жыл бұрын
update: used BM & DM mix yesterday (60/40) on a deep clean of the Outback (2 months since last bath) -- outstanding combo, the gloss was incredible and then sealed with Infinity Wax's SuperGloss+ Spray Wax -- you could dive into the Deep Blue Pearl now, thanks Phil. 😎
@MirandaDetailing2 жыл бұрын
Awesome!
@jayp94506 ай бұрын
Nice content. Off the topic question 🙋 what’s the best compound and polish working out in direct sunlight when doing paint correction
@MirandaDetailing6 ай бұрын
Hi. Most modern compounds and polishes can be used outdoors and even in direct sun. The Meguiar’s D300 correction compound is one of them. And 3D One and 3D Speed are also excellent for polishing in the sun b
@jayp94506 ай бұрын
@@MirandaDetailing wow good to know I got a 3D store 10 minutes out from where I live too. Haven’t heard much of them. Thanks
@MirandaDetailing6 ай бұрын
I love 3D products.
@shawnsharplis2662 Жыл бұрын
If its hot outside, do you suggest to rinse the vehicle before using the pre-wash application?
@MirandaDetailing Жыл бұрын
Hi. Excellent question! I have a video for that kzfaq.info/get/bejne/ea1ylbylyarVmKs.html
@thedellottocollector7478 Жыл бұрын
Lmao 😂I’m Arnold and we’re going to be detailing this vehicle Lmao 🤣 you are hilarious my bro
@SLW_GT29 ай бұрын
Where can I get a bucket with measurements on it? The link in description for the clear buckets doesn't work
@MirandaDetailing9 ай бұрын
Hi. Oh sorry. The link must be bad now. I got it from here. www.detail-division.com/products/ghost-bucket?variant=40881116414067¤cy=USD&gad_source=1&gclid=CjwKCAiApaarBhB7EiwAYiMwqr0lYq4WAgqlXlNlbg7Azu7fTLU2qSBkaxAgtWyZAgTRdFMI5INSgRoCmuoQAvD_BwE
@goatgod591 Жыл бұрын
But this takes too much time. Just use a concentrated cleaner like Zep purple degreaser or their truck and trailer wash in a foam cannon. Mix it about 1 to 1 or a little less in the cannon and it’ll dilute more with the washer but it makes a perfect ratio to 90% clean anything. Both products I mentioned are $15 a gallon or $40 for 5
@MirandaDetailing Жыл бұрын
Maybe for some it would take too much time, we used to do what you said and it wouldn’t work for us. Our method that we showed is much faster and more effective. We have tried it all and this wins every time. But it’s cool, if what you do is faster for you then keep on doing it .😎👍🏼
@goatgod591 Жыл бұрын
@@MirandaDetailing weird because when I use super clean or any other the foam does nothing but the Zep purple always makes the foam turn on tires turn brown and bug spots start to just fall down but yea man you’re right we all have things that work for us but don’t for others
@MirandaDetailing Жыл бұрын
@@goatgod591 Right on man! 😎👍🏼
@stephen15032 жыл бұрын
I’m assuming this is fine to use on every car, because if it’s coated the APC won’t eat it-and if it degrades the sealant on there, you’d be topping it anyway.
@MirandaDetailing2 жыл бұрын
So using a strong apc or soap for maintenance washing is not what we do. These methods are only for the initial cleaning only. For maintenance washing you only need to rinse and wash per usual.
@stephen15032 жыл бұрын
@@MirandaDetailing makes sense to me!!
@richardseem79482 жыл бұрын
another awesome video and tutorial/content good friend
@franciscofajardo95622 ай бұрын
8:25 what brand pump sprayer is this?? Thanks in advance👍🏻
@MirandaDetailing2 ай бұрын
Hi. It’s just a cheaper hand pump sprayer from Home Depot or Amazon. amzn.to/4erZRjf
@peterrudy9207 Жыл бұрын
9:08 Top seals - Maybe use plumbers grease / silicone grease .
@MirandaDetailing Жыл бұрын
Oh yeah. I actually just use Vaseline.
@keithcurley67602 жыл бұрын
Great job Phil, was that the SPTA cordless polisher that you were using to apply the sealant?
@MirandaDetailing2 жыл бұрын
Hey man. Thanks. Yeah it’s this. amzn.to/3I9F0kZ
@keithcurley67602 жыл бұрын
@@MirandaDetailing Awesome! I plan to buy one today, thanks Phil :)
@sethlover64985 ай бұрын
forget the apc rinse.... what shades are those phil???
@MirandaDetailing5 ай бұрын
🤣😎👍🏼. I got them at a TJMaxx
@greggriffin3242 Жыл бұрын
What is your choice of product and dilution ratio for the foaming wash
@MirandaDetailing Жыл бұрын
We use Super Clean mostly at a 1:10 dilution.
@zrxbeast1100 Жыл бұрын
Love it :) yall are great
@coreymerritt77422 жыл бұрын
Hi Phil that tire shine spray does it sling on to the paint or do you brush it in a little thanks 😊
@MirandaDetailing2 жыл бұрын
Hi. If applied to heavy I have found all dressings sling….so with this one. Spray it on, let it dwell and then go back with a towel and gently wipe down any access. It will be fine! 😎👍🏼
@coreymerritt77422 жыл бұрын
@@MirandaDetailing thanks I just spotted a combo pack at one of our automotive stores going to go check it out
@east16662 жыл бұрын
What machine are you using to apply the wax/sealant? Looks very handy....
@MirandaDetailing2 жыл бұрын
Hi. Its this little guy amzn.to/3ahI7ed
@richardmartinez6378 ай бұрын
Hey boss what apc did y’all use and what would ya recommend for a beginner 🙏🏽🙏🏽🙏🏽thanks y’all ‼️‼️keep up that 🔥🔥 work
@MirandaDetailing8 ай бұрын
Hi. We to this day still use Super Clean, we dilute it 1:10. I would dilute it 1:20, remeber to just not let it dry on the paint, only let it dwell for 30+ secs then rinse it off.
@briangreco21622 жыл бұрын
Phil, great video. Could you use this method when cleaning a ceramic coated car? I have Gyeon mohs and top it with their ceramic detailer after every wash.
@MirandaDetailing2 жыл бұрын
So using a strong apc or soap for maintenance washing is not what we do. These methods are only for the initial cleaning only. For maintenance washing on coated vehicles you only need to rinse and wash per usual.
@barrybij80792 жыл бұрын
An animal farm reference... nice... my favorite was something like... no animal shall sleep in a bed...later the pigs added... with sheets... that always cracked me up... was the shooting range there when you moved in.? That constant banging would be annoying...
@MirandaDetailing2 жыл бұрын
Exactly! 🤣 yeah that was funny! No the neighbors just shoot in their back yard. Oh well🤷🏻♂️. Hence the reference….🤣
@galandetail Жыл бұрын
can u put superclean on paint
@vicjensik59852 жыл бұрын
Do you use the same process if the vehicle has protection like a ceramic coating? If not what would you differently? Thanks!
@MirandaDetailing2 жыл бұрын
So using a strong apc or soap for maintenance washing is not what we do. These methods are only for the initial cleaning only. For maintenance washing you only need to rinse and wash per usual.
@granddetailing2 жыл бұрын
Hi Phil...love your videos!!! you and your wife are awesome!! your tips and tricks are great! I have one question for you .... any thoughts on Ozone machine? ... do you use it to "disinfect" cars? I read mixed info about it eg. it needs to be really strong machine to actually kill bacteria, or that repeated use is harmful to the surfaces in a car....i find it also inconvenient since i cant be present during the time machine is working. also afterwards during refreshing air in the studio. how do you deal with disinfection and is it a service you offer? feel free to make a short video :-D Thank you!!!
@MirandaDetailing2 жыл бұрын
Hi. We do use an ozone machine sometimes for very light odors. But we never guarantee odor or completely disinfecting. There is just no way of guaranteeing that.
@johnhufnagel2 жыл бұрын
would you consider the turtle wax max-power for the APC? i only ask because, I have it here now and it sounds like it's stronger concentrations would fit the bill?
@MirandaDetailing2 жыл бұрын
That could really well also. Give it try!
@johnhufnagel2 жыл бұрын
@@MirandaDetailing which concentration would you start with. The mild, moderate, or just go flat out aggressive and call it a day?
@MirandaDetailing2 жыл бұрын
It’s not as strong as a dedicated apc, so I have used it full strength in the foam cannon before and it’s seems to work really well!
@ran3532 Жыл бұрын
Nice video! Did you use Kosch or P&S APC for the exterior pre wash? Did you time it before rinsing? Thx
@MirandaDetailing Жыл бұрын
Hi. At minute 4:47 I showed that we used KCX Super Foam for the pre wash this time. We don't need to time anything, just wait about a minute and keep an eye on it so that it doesn't dry.
@ran3532 Жыл бұрын
@@MirandaDetailing thanks for the great tips and content!
@patxx11679 ай бұрын
hello I am new to your channel, dsl de mon English I am using a translator, I am from Quebec, question I do a lot of customers in the spring with really dirty vehicles, and I have not yet found a good prewash method, but in seeing your video I can't wait to try it, I have a lot of gallons of P&S | ALL PURPOSE CLEANER GALLON but I don't find that does a good job for pre-washing unless I don't have the right ratio, I read that you take a lot of super clean and KOCH CHEMIE GREEN STAR which would be the best for vehicles dirty and the right ratio to mix thank you very much and I subscribed to your channel see you again
@MirandaDetailing9 ай бұрын
Hi. Thanks for watching! Definitely try the Koch Chemie Green stat at either 1:4 or 1:10. Try both and see how they work. I still use Super Clean 1:10 and I found that to be the most effective and most affordable.
@patxx11679 ай бұрын
@@MirandaDetailing thank you very much for the information
@kirbyschneider41872 жыл бұрын
So your prewash should be alkaline, regardless of foam or spray? Also, what does Mercedes call that color? It’s beautiful sleek grey. Thank for the video!!
@MirandaDetailing2 жыл бұрын
Hi. Yeah the pre wash for vehicles that need full details is always a high ph to help clean better. Not sure on the color name but it’s awesome!
@sikkinixxmc Жыл бұрын
Do you use this on ceramic coated vehicles? I Do in mine every month and it seems to help clean it better than a regular wash
@MirandaDetailing Жыл бұрын
Hi. You definitely can.
@D_Rok80 Жыл бұрын
In regards to the polisher you were using. Do you know if using a paste wax on the pads instead of a liquid wax be ok?
@MirandaDetailing Жыл бұрын
Hi. Yes you can use paste waxes with this polisher and pad also.
@ayodine12 жыл бұрын
Nice job as always Phil and Jess. I always learn alot. On a lighter note with all those gun shots is Elmer Fudd hunting wabbits?
@MirandaDetailing2 жыл бұрын
Thanks! 🤣 🐇 🔫
@edwinnegron7758 Жыл бұрын
like your videos and the detailed information. I am a weekend warrior but like my cars to be in tip top shape and shine. what product do you use for a spray on wash off for rims to keep them clean? I have seen a few but like your opinion. thank you
@MirandaDetailing Жыл бұрын
Hi Thanks. So we have used Gyeon Wet Coat and recently Pureest Hydrophobic Shampoo on wheels. With that product i spray, agitate with a soft wheel mitt then rinse and it beads up like crazy. bit.ly/3zZnwVz
@Batman34882 жыл бұрын
Do you still use meguuairs apc? What's your ratios of dilute for interiors and exterior
@MirandaDetailing2 жыл бұрын
Hi. I haven’t in a while. But when we used to we used 1:10 for light to medium and 1:4 for heavy cleaning.
@bbdetailing91232 жыл бұрын
Looked great
@johnhufnagel2 жыл бұрын
that little hand held polish applicator you used, what is that! I might want one.
@MirandaDetailing2 жыл бұрын
Hi. It’s this. amzn.to/3I9F0kZ
@Tundra_Guy Жыл бұрын
I just used Super Clean at 4:1 on a Honda Accord and let it dwell on the paint for 30-40 seconds then rinsed off. I noticed I now have streaks on the paint where it appeared to have dried? Temp outside today was only 55 degrees and not in direct sunlight. Have you experienced the paint staining from any APC and if so, how did you remove it? Not coming off when drying the paint or using a quick detailer.
@MirandaDetailing Жыл бұрын
Hi. Did you pre rinse first or apply on dry surface? Honda paint is typically soft so it may need a light polish or just machine applied wax or AIO.
@Tundra_Guy Жыл бұрын
@@MirandaDetailing rinsed off panel first then APC. APC wasn't dried on the surface after second rinse.
@MirandaDetailing Жыл бұрын
Could just be sensitive paint. I light polish or machine applied sealant should fix it
@jerryguillaume6435 Жыл бұрын
Hey Miranda! What foam tip are you using in your IK foamer, is it grey one, the green one or the orange one?
@MirandaDetailing Жыл бұрын
Hi. Actually i'm not use, I never changed it when I bought it. I think its the green one.
@Hutch4002 жыл бұрын
Yup savin this one to. Hey Phil, I noticed the tires were still a little brownish in color. I keep getting the same thing . Not to worry?? Or does the dressing just cover it anyway?
@MirandaDetailing2 жыл бұрын
Hi. Yeah even after heavy cleaning some tires will always have that blooming that happens. I don’t worry about that however because the tires always get dirty again. Customers simply don’t care that much.
@Hutch4002 жыл бұрын
@@MirandaDetailing by the way....I love the stool, used it this weekend. Huge back saver👍
@bsm1th992 жыл бұрын
I didn't see the link to that battery powered polisher you were using unless I might have missed it. Curious as to the brand that is and the cost?
@MirandaDetailing2 жыл бұрын
Hi. Oh sorry. Here it is amzn.to/3PiZTgc
@jefferrrson1x3 ай бұрын
What APC was used in the video?
@MirandaDetailing3 ай бұрын
Hi. I said it at minute 1:40. I was using my the Koch Chemie Super Foam
@jefferrrson1x3 ай бұрын
@@MirandaDetailing thanks sir!! Big fan of your videos man. Hope you’re in great spirits and aren’t experiencing any burn out w being a creator. All the luck and blessings!
@MirandaDetailing3 ай бұрын
@jefferrrson1x You’re welcome!! Thanks!
@jakogaming92222 жыл бұрын
Does SFN product is APC ? You sayd its about 12PH but in other video you told us that is about 5PH. When you mix it with water 1/4 its PH is also going down ?. The other question is if i want to use bug spray as pre-wash can i change bug spray for APC(SFN) product and use it in pre-wash and if yes than can i pre-wash whole car with APC deluted with water ? I will focus mainly on Mobile car wash. Thank you for answer.
@MirandaDetailing2 жыл бұрын
Hi. The SFN soap is not an APC. Its a high ph soap. I may have misspoke or was talking about another soap if I said it was ph5, its a ph of 12. it can be used as a prewash, used in either a foam cannon or the IK pro foamer12. it does great on bugs also in the prewash.
@jakogaming92222 жыл бұрын
@@MirandaDetailing okey thank you for the answer. So can you explain basicly for what is APC and when should we use it ? Im new in detailing and Im starting also with my girlfriend. Ps.We was happy that there is couple that doo detailing together
@detailguyautocare10242 жыл бұрын
What dilution do you recommend for 3D APC for a pre rinse?
@MirandaDetailing2 жыл бұрын
Hi. I believe they have the dilutions on the bottle. Which 3D apc are you using? The nano pals?
@zesz-vexx645 Жыл бұрын
Does the pre wash cause any prior coatings to be stripped? Would this only be used on cars that will be stripped and re-coated or will it be ok to do on maintenance washes as well?
@MirandaDetailing Жыл бұрын
Hi. Yes this strong pre wash is for vehicles that we are initially detailing and will either protect after or polish and coat. If you search maintenance detail in our channel you will find more videos like this kzfaq.info/get/bejne/etybd7aiya3HmoE.html
@stevel38812 жыл бұрын
What little handheld polisher did you use to apply the sealant?
@MirandaDetailing2 жыл бұрын
Hi. It’s this amzn.to/3bX2fmx
@GoTMLGo1967 Жыл бұрын
With the right dilution, could you do a apc wash as part of the decontamination process with a ceramic coated car?
@MirandaDetailing Жыл бұрын
Certainly can! I would do 1:10 and see if that works. You could also can do 1:4 on really dirty coated vehicles.
@GoTMLGo1967 Жыл бұрын
@@MirandaDetailing would super clean @ 1:10 ratio be to harsh?
@MirandaDetailing Жыл бұрын
@@GoTMLGo1967 that’s what we use also and it’s fine.
@GoTMLGo1967 Жыл бұрын
@@MirandaDetailing thank you 🙏
@greggriffin3242 Жыл бұрын
Does super clean foam up
@vcs59962 жыл бұрын
Can you use the pre wash on Matte paint & Matte painted wheels?
@MirandaDetailing2 жыл бұрын
It depends on if it’s matte PPF, vinyl, or actual matte paint, you can still use these methods but at a weaker dilution.
@jonathanmariani56272 жыл бұрын
Great video If you doing a pre rinse with a apc which one would you go with? Super clean? Or a Koch chemie greenstar start or does it matter? Also what would be the recommended ratio for a pre rinse with an apc?
@MirandaDetailing2 жыл бұрын
For APC rinsing I go back and forth between Super Clean and KC Greenstar. both work really well.
@Garzaautodetailing2 жыл бұрын
@@MirandaDetailing what are the dilution ratio's for GS?
@MirandaDetailing2 жыл бұрын
I like to use it 1:4-1:10 for an apc rinse and 1:10-1:15 for interiors.
@flowinthrou Жыл бұрын
How many washes do you think an lsp will last if you spray apc as a prewash?
@MirandaDetailing Жыл бұрын
Hi. Well the pre wash like this is not meant for maintenance details. I don’t use it on protected vehicles with waxes and sealants. On coatings it’s fine if they we showing signs of clogging. kzfaq.info/get/bejne/e6yRiqqmzq3Hj5c.html kzfaq.info/get/bejne/pd-BhcSqkpnGg6s.html
@chriskeomek3320 Жыл бұрын
What if the vehicle has a wax or sealant what can I use as a pre treatment? I’ve heard I could just dilute some onr but what are your suggestions?
@MirandaDetailing Жыл бұрын
Hi. So this pre wash process is for initial details only. Vehicles that have a wax, sealant, or coating are washed differently. Basically just pre rinsing, foaming and washing. But if you need a little extra cleaning power for protected vehicles you can use a dedicated pre wash foam like AM details Snow foam. It’s tough enough to clean without compromising any protection bit.ly/3IWNKwr Use code MIRANDA10 for 10% off
@chriskeomek3320 Жыл бұрын
@@MirandaDetailing so if I do pre-treat a vehicle with apc, can I use like a spray wax after? What about if I’m mobile detailing and I’m trying not to let the water dry? Is a drying aid the same thing as a wax?
@MirandaDetailing Жыл бұрын
So are you washing a vehicle that has protection already on it? Or is this an initial detail that you want to deep clean and then wax or seal afterward? That’s where the difference is for me. For a maintenance wash on a vehicle that is already protected if you need to use a stronger pre wash then you should follow up with some sort of spray protection to top it. Not all “drying aids” have protection in them. So find something that is a spray wax/sealant that can be applied wet or dry. The hybrid solutions wet wax is a ceramic based spray on ceramic sealant that can be applied wet or dry. bit.ly/3Nh3vRq
@stlwrx2 жыл бұрын
What decon are you spraying on the paint Phil?
@MirandaDetailing2 жыл бұрын
Hi. It’s Hybrid Solutions Rapid Decon in the electric spray bottle! It’s awesome stuff! bit.ly/3F4kuA5 bit.ly/3NTULPw Use code Miranda10 for 10% off
@greggriffin3242 Жыл бұрын
What did you use to clean the rims
@MirandaDetailing Жыл бұрын
It's this bit.ly/3lovTFQ
@andrewcramer72142 жыл бұрын
Another great video!! Im in the pnw so the main thing I fight is moss, I stopped pre-soaking a while back since It didn't matter what I did I just had to spend the same amount of water and time rinsing the moss out of the seams. Any suggestions on a moss specific pre? I'm going to look around thanks for reminding me it can be helpful! On a side note, if my neighbor was letting freedom ring in the first week of July I'd join him/her. And get their number so I could let em know in advance that I was filming at a certain time and maybe they would save their rediculously pricey ammo at that time. Just a thought. I know if I had enough property to have a berm I would happily oblige my friendly neighbors if they needed certain quiet times. Thanks again for a great video I'm off to look for a moss specific pretreat :)
@MirandaDetailing2 жыл бұрын
Hi. Thanks! Oh wow moss build up. That’s crazy. I would assume a high alkaline treatment would soften it enough to blast off. We have done a few neglected mossy vehicles and we just used a strong degreaser/apc mixture to pre soak and it seemed to work well. Oh I understand that the 4th of July thing…but this was filmed a few months back. It’s just random gunfire on their property. Their fireworks are usually pretty awesome actually. 😎👍🏼
@jdisdetermined2 жыл бұрын
✊ fellow PNW detailer! I find the best thing for moss, algae, etc. is Romabio Algae and Moss Cleaner. I’d link it, but KZfaq will block it. Its on Amazon. It’s environment friendly and safe on all exterior surfaces and works great without agitation just follow up pressure wash, highest psi you’re comfortable with. It inhibits further growth too, and I find it makes a difference on rubber seals that don’t get a lot of protection attention like paint does. My big hassle is pollen.. when it builds up around door and window gaps and cracks.. stuff is sticky as hell. I usually soak it with Citrol and then steam, but if you have a good method for that crap, let me know.
@gs_mick2 жыл бұрын
Hey Phil loved the vid - sorry if dumb question but would a prewash with such a high Ph be ok on ceramic coatings?
@MirandaDetailing2 жыл бұрын
So using a strong apc or soap for maintenance washing is not what we do. These methods are only for the initial cleaning only. For maintenance washing on protected vehicles, whether coated or waxes/sealed you only need to rinse and wash per usual.
@gs_mick2 жыл бұрын
@@MirandaDetailing aah I see! Thanks for clarification 👍👍👍👍
@davidbram2 жыл бұрын
What is the little cordless polisher that you used?
@MirandaDetailing2 жыл бұрын
Hi. It’s this. amzn.to/3I9F0kZ
@jjjjjjjjjjjhjjjjjhjj2 жыл бұрын
Is the gtechniq citrus apc a good pre wash for the IK foamer or sprayer ? Also what do you do with the hose reel after each use ? Mine collects a lot of rocks and dirt is it okay to roll it up and leave it every time ? Thanks, I’m going to get a pump sprayer ordered today for this
@MirandaDetailing2 жыл бұрын
The Gtechniq citrus foam is good but I still like to use super clean or other apc for the pre wash or apc rinse. For the hose reel I use a towel to wipe the hose as I reel it in to keep it clean.
@jjjjjjjjjjjhjjjjjhjj Жыл бұрын
Does that foam pump sprayer need to be rinsed out after each use before storing ? Everything IK I’ve tried never works what else can I use to spray an APC to pre wash the paint???
@TripleGAutoDetailing2 жыл бұрын
Great video. I have adopted this "process" 💯 % and getting amazing results!! 💎 Gonna try the Bead & Dreammaker combination. 👍 Take cover Phil you're under fire...🔫🤦
@MirandaDetailing2 жыл бұрын
Thanks man! What do you mean under fire?
@TripleGAutoDetailing2 жыл бұрын
@@MirandaDetailing lol...all those gun shots in the background
@MirandaDetailing2 жыл бұрын
Ohhhh right! 🤣🤣🤣
@mauricefallon-di7rw Жыл бұрын
It sounds like if he was under fire he would be at a disadvantage.
@MirandaDetailing Жыл бұрын
Yup…anyone with a gun is a danger to us.
@paul-fk7de2 жыл бұрын
Great video just a question see the pre wash if I put it in a 5ltr pump sprayer but I only use a small amount will it be ok for the next time the stuff I have mixed or will it break down over weeks ??
@MirandaDetailing2 жыл бұрын
Hi. It doesn’t go bad or anything. So you’re good. 😎👍🏼
@paul-fk7de2 жыл бұрын
@@MirandaDetailing Thank you 😊 ❤
@RenzoSpeed3 Жыл бұрын
Could I mix some meguiars d101 APC with my snow foam soap to get a bit extra bite? It’s been a rough weather couple of days here in Texas
@MirandaDetailing Жыл бұрын
Hi. Depending on the soap it may not need that...but if you find its not cleaning enough yes you can add a few oz of a strong apc to increase the cleaning.
@SeaFoamSparkles2 жыл бұрын
How you liking that sgs-28 and acqualine nozzle set up?
@MirandaDetailing2 жыл бұрын
I love them! Such a nice gun and nozzle setup.
@SeaFoamSparkles2 жыл бұрын
@@MirandaDetailing glad to hear. I really want the sgs-35 Bc I love the color, but I’ll probably settle with sgs-28 because of the pride difference lol
@fortmillautospa2023fortmill2 жыл бұрын
Good morning Phil Great video What’s your coffee of choice?
@MirandaDetailing2 жыл бұрын
Morning! This weeks coffee came from a small batch brewer in KY. Kankuamos Colombian!
@flowinthrou2 жыл бұрын
I make my regular washes in 1,5 hour (alone) and I`m in a hurry
@edmay9472 Жыл бұрын
Alan what do you use as a clay lube?
@MirandaDetailing Жыл бұрын
We usually just use the soap on the vehicle as the clay line because we wash and use the clay mitt or towel at the sale time. Sometimes we clay separately and just whatever clay lube we have laying around. Doesn’t really matter much.
@vinicius_valerio Жыл бұрын
Hey guys, first time here and subscribed. How much would you guys charge for that outside detail? im about to start my detail business here in Australia. wish me luck😂
@MirandaDetailing Жыл бұрын
Hi! Welcome! That’s awesome! We wish you success! Usually for our exterior details they start at $175 for a basic wash, clay bar, and sealant. Our polishing services start at $500.