Find my favourite tools here! www.amazon.com/shop/chrisnotap

I tried every other KZfaq instruction on how to press back a pesky back that refused to pop back in. Brute force, press with a plank of wood, press down full body weight with handle of spanner, hammer, pliers , bice grip... nothing worked, I had resigned to taking it to a shop untill I searched one last time and found your method. No need for one dollar store as I already had everything. I lined everything up and turned till I heard that pop... was either going to be cracked watch face 😅, or the back popping in. No cracked glass, kudos to your instructions, gentle and steadily increasing pressure is the trick, thank you! 🙏

Thank you sooooooooo much! I moved to the country and we have no jewelry repair shops for miles. Your video is perfect for me to do it myself. I own many watches and they usually go out near the same time. Now I'm ready when they do.

Thank you so much, my husband has 5 or so watches that need new batteries. I can't seem to find any good watch repair shops in the area, and a local jewelry store quoted me $50 per watch! I plan to knock them all out this weekend. You're the best!

Thanks, Chris Notap! I have been just buying replacement cheap watches since having a jeweler change the battery was costing MORE than a new watch!

So straight to the point with very clear instructions. I like this guy. Five Star video.

First person who helps you get the back replaced without buying a new tool

i spent about 3 hours yesterday trying to get a watch back off an older Victorianox. No joy after watching a half dozen videos but that method for popping the case back on is ingenious and i modified it to help me remove the back of my watch. this video is canadian ingenuity at its finest. Thanks so much.

This worked perfectly! Love the important safety tip about using a felt pad on the crystal side. And sure enough, simple household tools work even better than watch repair kits. Thank you!

This worked, took much more pressure than I thought. Thank you. During Covid couldn’t do the jewelers.

Freakin' awesome educational video! I was literally going to jewelry store to change battery because I was informed by "them" that a special tool needed to change battery but your video showed us how to do it ourselves. I so love learning new things, whatever it may be, because the more I know, the less I know. Thank you so much. Gratitude, Appreciation & Respects....from San Antonio, Texas

Here after getting lazy and now have 6 dead watches lol

Thank you for this video and the tips! I just replaced a battery using your method. Got the case closed on the very first try. Two felt pads, two U.S. quarters, and a C-clamp. I have a Timex Weekender 31 mm watch that I love. Thrilled that I could replace the battery on my own. Thank you!!

I'm excited to try changing and replacing batteries on many AVON watches I own. I hope to save some money doing this method. I'm tired of paying the watch repair shop to replace dead batteries in my watches. Really good video! Thank you!

Just changed the battery in my Lorus ladies watch. The C clamp worked a treat. Thank you for this really useful video.

I just watched 10 videos about the same and yours is by far the best. Thanks for the clear video and explanation.

A great video, all the stupid stuff cut out. More videos should be like this. Clean, concise, and simplistic.

I've done this plenty of times over the years and was always able to snap the back on easily, but I have a Timex who's back was particularly stubborn. I already bought a watch case press from Amazon. It was only $10.00, but I already had the tools you showed. So yeah....insert regret face here lol. I can attest to your methods though as being a reasonable work around and they should help a lot of people. Thanks for making this video, this is why the DIYers on KZfaq are such a great bunch of people!

Worked perfectly. Clamp was not required for my watch. Strong thumbs! Was able to bring a watch back to life after being told by multiple jewelers they wouldn't change it due to the water resistant warranty. Thank you!

Can’t thank you enough for posting this! So glad to have a solution for what seemed impossible. Now I have my watch back! God bless you! ❤️

Your 2nd method worked great for me, as I don't have the thumb strength anymore due to arthritis. I just modified it a bit to use 2 socket wrench sockets that matched the size of the bezel and the back, then clamped as you did. There was no audible pop, but I could feel it click in

Best video I've seen on this subject!

Everything is so complex. You just made this wonderfully simple! Thank you!

The clamp hack to provide the pressure to re-seal the back plate was brilliant! I just put it to good use :)

Thanks to you, I changed batteries in two of my watches for the very first time!! Yay! Time and money saving tips! Thanks again! 👍

The c-clamp idea is genius! It worked perfectly. BTW I reduced the number of moving parts to juggle, by removing the cover on the sticky side of the circular pad. I stuck the coin right to it. Fewer things to adjust in the clamp. I use a hobby/craft magnifier on a stand for the close work. Thanks for all the useful info!

This... was the best video ever!! Straight to the point! I love it! And very helpful, thank you!

I was struggling to find the right "tool' to remove the backing on my watch. I finally found a small, cake spatula that was thin enough to pop the cover right off! Appreciate your video!!

Thank you for the knowledge! I just got a crazy deal on some watches that only need new batters. $35 dollars for 5 watches that are brand new and sell for $130 a piece. I'm going to replace the batteries and attempt to sell them.

Great instruction and calm voice, I am happy 😃 thanks for taking time to share this.

Hi Chris, like many other people looked at 2 or 3 other videos before I got to yours and yours looked the safest bet so as to not damage the watch. I had bought two vintage watches that needed new batteries, which I replaced, but then the back would not go on. Needless to say the back of both are now on and watches all intact. Thankyou

clamp went crazy putting the back in place. huge thanks bossman

this worked a treat.....already had a pack of assorted batteries from the dollar store...actually less than a dollar with exchange rate.....so ended up being a 5 cent fix! Cheers

Exactly what I needed, and strait to the point. Thank you!

Thanks so much for this! Last time my watch died it cost me $15 to have the battery replaced, this time, following your instructions, a dollar for the battery! Thanks again!

dude. u r amazing. simple tools. thank you for the dollar store tip as well! much appreciated. from dallas,

Thanks for this. I tried some of the other suggestions like a piece of wood or spanner across the watch back but it was too tight to close. I used a bench vice instead of a c clamp, slightly fiddly due to all the parts trying to drop out, but it worked with that extra bit of pressure.

Thank you so much for your excellent video with admirable brevity!! There are how-to videos on replacing watch batteries on YT that are *_18 MINUTES_* long, which is my idea of Hades….so much needless and dare I say unconscious repetition without the helping hand of an editor,man’s a lot of wasted time. This is wonderful!

Thank you, sir! You just saved me a lot of money by teaching me this. Lately, the prices of changing a battery watch went insane and I need to change the battery on 4 of my watches. Thank you again!

He’s my favorite, straight to the point. Love him.🥰

Straight to the point! Love it, thank you!❣️

Thanks so much! Never had a watch before and my Grandpa gave it to me as a gift. Now I know how to change the battery!

Nice simple straightforward video. Thank you!

There are great videos on this subject and are short and to the point. Your video is a great video.

this guy LOVES the dollar store

worked great, tired of the problem, he solved it.

The clamp worked like magic!! Thanks for the great idea. 😊

Thanks, it worked! It took a bit more force than I thought it would but otherwise, much better than paying someone else to do it.

exactly what i needed. thanks again

You’ve saved me a fortune. Thank you so so much for sharing!

Awesome video! It's simple and straightforward! It saved me from buying a new watch

Thanks. Short and sweet.

Thank you. I changed out the battery in no time. Good, useful video.

Thank you very much! Everything you described helped. Just did my first watch repair. Yeah!

Just did this! Worked flawlessly!!! Yhank you so much!!!!

Great video. I have a lot of watches that stopped ticking. Excellent method of getting the back plate secured. Cheers

Thank you very much! Very useful video!

This video just saved my bacon just now bought a Quartz watch at the thrift store really nice looking almost like new didn't realize the darn thing wasn't working and I'm not paying someone a arm and a leg for something I can probably do myself god bless good ol reliable KZfaq and god bless your quick and easy insightful video

Fortunately, I didn't need the C clamp :) Worked like a charm. Thank you!

Clear and concise and it works!

This was closest to what worked for me. I tried two other methods described elsewhere with no luck and almost ordered a watch case press but it would have taken too long to arrive for my impatient mother waiting to get her watch back so I studied videos of the presses and figured out a way to improvise my own. I used a small drill press vise and found a large socket set socket that fit over the watch face but caught the outer body of the watch. I considered a small steel nut to place against the back but settled on a small crescent wrench round end that was smaller than the diameter of the watch back and then slowly tightened and...snap. Success. I love dollar stores as well for cheap materials/tools that can be used by creative problem solvers.

Thank you for the idea and instructions. It was a big help.

Thanks for the Info. Very helpful.

Thanks for sharing! I marked the back of the watch with a marker so I could put it back the exact same way, which was really helpful.

You're amazing 😍 how simple and not too much yaping to kill 30 minutes on simple battery replacement Thank you ✌️

Wow! What a great video. I needed the C-clamp / vice grip method and it worked. Thank you!

Thank you so much! No extra money used!

Thanks! We used a pair of tweezers to pry the back off and it worked great.

It worked, thank you. Although in my case it didn't make any snapping sound when it came on, so I wasn't sure if it did the trick or not until I removed the clamp (I used an F-clamp).

Very Good, So Simple, Thank You.

It worked! Thank you for all your help.

Thanks for this video. I knew it wasn't rocket science,, but didn't know how to do it before I watched your video.

Thanks, this helped a lot and saved me £20+ :)

Thanks..worked great for me! Appreciate your taking the time. I clicked on your ad so hopefully you'll make a penny or two.

My sister went to a jeweler who charged her $90 American for a battery and replacement. Rip off time at the jewelry store. Her husband has since learned how to replace the battery which saves her a bunch of $$$. There are jewelry stores who will rip off people, and say they are giving them a good deal saying that they won't find the battery any cheaper anywhere else. Hmmm. Try the $ store or Walmart.

Very helpful. Thanks!

Thanks a ton just follow ur instructions and be able to replace my son's watch battery. May u always enjoy your good time 😊

This video saved my sanity!!! Thank you!!!!

this is one of the best videos I watched in KZfaq! Thanks man!

Just changed the battery on my watch by watching your video , luckily the back snapped in so I didn’t have to clamp it , thanks again!

That’s amazing !! You went straight to the subject ⭐️⭐️

Very useful demo- Thanks!

Very nice way of doing it. Thanks 😊

Thank you, I have a dozen watches that need batteries. Thanks for the tutorial and making it simple :)

Thank you! I never heard a click, but the back is on. Worked great!

Thank you!!! Saved me a trip to town!

Very good simple way to put on a watch back. Thanks I have two watches to do now and will try.

Great advice and very clearly presented!

I thought I'd never get that back on; glad I watched your video. I had to position the clamp In a couple of places to get the back down all the way, but it worked!

Thanks!! Was able to change the battery in my favourite watch easily because of this 😊

This was so helpful, thank you!!!!

THank you very much. I guessed how to do it but thought I'd need a jewellers to do it. Easy as pie. The hardest part was getting the back to slot in properly but it clicked eventually. Brute force and ignorance.

Used the c clamp method and it worked a dream. Many thanks

Very very helpful. Thank you

Totally just did it !! Awesome.

Wow its very easy. I tried it. Thanks

Agreed. Yours is the best! To the point and I got it! thanks Chris

This video saved me so much money. I had the tools but couldn't get the back off. Now I know.

Great video! Thanks a bunch!

Thanks for the quick and informative video