Рет қаралды 138,855
🆕 UPDATED: Please enable youtube subtitle/CC for instructions.
✅ CONFIRMED WORKS FOR: MP190, MP198, MP250, MP258, MP270, MP276.
Using a #Scanner on #Canon #Printer without #Ink or Cartridge.
www.instructabl...
~~~~~~~~~~~~~~~~~~~~~~~~~~~
Step 1: REMOVE ALL CARTRIDGE.
We need to remove all cartridge. Remove ink and cartridge.
How to remove ink and cartridge? Turn printer ON, lift upper body to access cartridge, remove cartridge by pulling it to the front (to you).
~~~~~~~~~~~~~~~~~~~~~~~~~~~
Step 2: ENTER 0 MODE.
Now we need to enter 0 mode. I call this 0 mode because its simply show "0" on the display.
How to enter 0 mode on Canon MP198 model?
-Turn printer OFF.
-Disconnect USB cable.
-Close front lid.
-Insert A PAPER into paper tray.
-Press and HOLD "stop/reset" button.
-Press and HOLD "ON" button.
-Release "stop/reset" button.
-Press and release "stop/reset" button 2x.
-Release "ON" button.
-Wait a moment, it will enter into 0 mode.
-AFTER show "0", turn OFF printer.
-PAPER will slightly coming/moving in.
Go to next step after PAPER slightly coming/moving in.
~~~~~~~~~~~~~~~~~~~~~~~~~~~
Step 3: ENTER E3 MODE.
Then we enter E3 mode.
E3 mode will blink "E" and "3" continuously.
-TURN ON printer.
-PAPER will continue moving in.
-After half of paper inside, it will stop.
-Then it will display E3.
Continue next step after E3 mode.
~~~~~~~~~~~~~~~~~~~~~~~~~~~
Step 4: ENTER 1 MODE.
We will then enter 1 mode, (because it will show "1" on its display). 1 mode means printer are ready to use (as scanner) even without ink or cartridge.
-Open front lid.
-PAPER will continue come in,
until eventually out from front lid.
-Close front lid again.
-Finish, wait and it will go to 1 mode.
~~~~~~~~~~~~~~~~~~~~~~~~~~~
Step 5: START SCANNING.
Its done!, Connect USB cable from printer to your PC, and finally you can start using your Canon MP 198 as a scanner (again).
~~~~~~~~~~~~~~~~~~~~~~~~~~~
For detailed instruction, go here:
www.instructabl...