In this video, I show you how to screw stock cabinets together to get them ready for installation to the wall. Good Luck!
Пікірлер: 70
@depdad13 күн бұрын
Thank you, sir for your clear, concise, and simple instructions :)
@joelransom65303 жыл бұрын
Well hey, this was *exactly* what I needed so thanks! I like the 2 minute format too.
@2MinuteHowTo3 жыл бұрын
Aww..thank you!
@love4samantha2 жыл бұрын
Thank you! This was super easy and simple to follow! Appreciate you!
@cwill228520 күн бұрын
This is sooo helpful!!! I'd like to combine a couple of base bathroom vanity cabinents.
@Mprotenic2 ай бұрын
PERFECT HOW TO VIDEO!! got what I needed without a lot of fluff❤
@detoxertx2 жыл бұрын
I've used your videos to make sure I was doing things right during home repairs. Thanks for being quick with the info.
@scottslotterbeck3796 Жыл бұрын
This works, so. It's a rental.
@djdudekevin Жыл бұрын
I see comments on counter sink heads. But how he is doing it is fine. I use the same screws and it looks perfect and works fine. I put cabinets in a Apts complex’s all day. Good job! I like those screws. Work great!!
@GBabuu Жыл бұрын
This was very useful. Thanks for the post
@mbarrera25able2 жыл бұрын
Thank you for the video!
@andreavignes31532 ай бұрын
Short and sweet. Thank u.
@Ginger126603 жыл бұрын
Thankyou...needed this.
@bravo35416 ай бұрын
Short but excellent detail.
@thefreedomcall1906 Жыл бұрын
Thanks i was trying glue and all sorts of other gimmicks before seeing this..... Good Stuff!!!
@victorvek52272 жыл бұрын
2 1/2” GRK trim head screws for this, or a wood screw if you don’t have any on hand. The cabinet screws with the flat head are being used incorrectly in this application.
@wattacatch3040Ай бұрын
Succinct, no fuss, no muss, thank you!
@CharlesHam19063 жыл бұрын
Yes perfect, I was thinking I had to get 1/2 or 1/4 inch wood in between them.
@carlburkey7823 жыл бұрын
Thanks that was great
@debbievaters43865 ай бұрын
Love Your Video
@lrparrish2279 ай бұрын
I noticed you screwed the faces together. I have been confused as to either screw the faces together or the insides together. Thanks so much
@larrybenrus76083 жыл бұрын
Actually, incorrect use of cabinet screws for holding cabinets together. Should have used 2 1/2 wood screws with countersunk heads. Cabinet screws are for holding cabinets to walls.
@charlesvenangojr.3513 Жыл бұрын
Yes, and use a bit with a countersink built in so the head is slightly below the surface
@DontNeedToKnow84 Жыл бұрын
But doesn’t the washer head provide extra grip when joining cabinets? I have IKEA cabinets that came with washer head screws for joining adjacent units.
@waveriderz2687 Жыл бұрын
Screw he used was perfect. Grk screws are thin head to sit fairly flush, and exert inward pressure without splitting wood. Screws with counter sinking heads always exert some outward pressure on the hole due to the angle of the counter sinking head. Less chance of wood splitting when moving large rows of cabinets, secured together as a unit, are moved around during installation. The washer head aids in distribution of pressure on the wood and less on the hole.
@DontNeedToKnow84 Жыл бұрын
@@waveriderz2687 Fuck. I just switched out my washer-head screws for countersunk-head screws based on the comments in this video.
@larrybenrus7608 Жыл бұрын
@@waveriderz2687 If you like the look of unsightly screw heads and washers up and down one or both sides of your cabinet frames, you are correct. I prefer to drill a pilot hole with a countersink bit and then use the correct screws which avoids any chance of splitting anything.
@sugarxnspice10 ай бұрын
Wow I needed this tutorial so badly.. now where to buy such long screws 🤔
@joeaguirre30693 ай бұрын
Awesome video. Those are the same cabinets I'm installing. Question... do we do the same for the back, or do they not go connected in the back? Also, do you have any video on how to attach the cabinets to the wall?
@douglasflores1462 Жыл бұрын
Hi, do you have a video about joining one cabinet on top of the other? Thanks in advance.
@surya20896 ай бұрын
Which drill is better to hang wall units
@singletrackflow27 күн бұрын
What size cabinet screw did you use?
@michaelhinchey Жыл бұрын
So no need for wood between the two cabinets? Also no screws in the back of the cabinets. For reference I'm building an island.
@darylmclain51812 жыл бұрын
How about attaching 3 base cabinets at an angle
@joho84795 ай бұрын
I’m using these cabinet screws on these exact cabinets and every screw has broken off after the threading despite having a pilot hole. What could I be doing wrong?
@mikeweckesser44503 жыл бұрын
did you have any "end panels" to install? if so how did you do this? I bought some unfinished cabinet from menards and one end has an end panel to cover up the composite wood. I am trying to find the best way to go about this. Construction adhesive, wood glue and brads...? Im trying to stay away from contact cement or aerosol adhesive because the cabinets are installed already and man that stuff smells. Any help would be greatly appreciated.
@2MinuteHowTo3 жыл бұрын
Yes construction adhesive works great. Power grab has an instant stick.
@ClumsyCars3 жыл бұрын
Caulk and brad nails
@garneroutlaw1 Жыл бұрын
A bit of construction glue and I put 5 small brad nails. You can't even see the brad nails if you are painting them.
@Dragon-Slay3r Жыл бұрын
🙀
@chascollette3 жыл бұрын
What happened on the first hole you drilled😉
@shaunehemphill32593 жыл бұрын
What kind of screw is that
@marcopolo62943 жыл бұрын
Hi, great video, can you tell me what kind of drill and size? And also tell me the screw size and type? I’m a beginner and know almost nothing.
@Dragon-Slay3r Жыл бұрын
🙀
@Dragon-Slay3r Жыл бұрын
Nice thanks guys
@mjudy12138 ай бұрын
what size clamps are those
@stevenbgreen72442 жыл бұрын
Was that wood split where the hinges attached?
@2MinuteHowTo2 жыл бұрын
Honestly I’d have to go back and look. That was a while ago🤣
@charlesvenangojr.3513 Жыл бұрын
Also if you drill at hinge mark you’ll never see screws with door back on
@2MinuteHowTo Жыл бұрын
True and that’s great advice!
@Chopper1669 ай бұрын
How can you address the gap in the back of the cabinets if they aren't going against a wall? The gap that is created by the front trim being proud.
@JustinSmith-yr7xj9 ай бұрын
Measure the gap in the front. Cut shims out of plywood to that size. Place in the back gap and screw cabinets together. If you’re putting up against a wall its not really necessary.
@AlexKost-tq6bj Жыл бұрын
I thought you don't need to predrill with those GRK fancy screws? At least that's how they market them...
@marcusjames3035 Жыл бұрын
That’s how they’re marketed however if you split that face frame then they are ruined. Predrill with a tapered bit. Don’t drill the entire way though. You want the screw to slide freely through the first cabinet and screw into the second cabinet pulling it right
@waynedejager35117 күн бұрын
We call the screw head Torx not star.
@Spawny5009 ай бұрын
Would counter sink
@matts7476 Жыл бұрын
You screwing them together before or after screwing them to the wall??
@2MinuteHowTo Жыл бұрын
I screw them together first. Sorry if I didn’t talk about that🙈
@PTBadger2 жыл бұрын
What about the gap in the back of the cabinets?
@victorvek52272 жыл бұрын
Exactly. Always place a spacer, typically 1/2” ply squares, at the back bottom & back top.
@msmoomoo532 жыл бұрын
@@victorvek5227 how do you get the bottom one out?
@Dragon-Slay3r Жыл бұрын
@@msmoomoo53 you take it out the electric connector plug
@Dragon-Slay3r Жыл бұрын
Are you blind? This screw is from am electronic connector plug
@neil-ko5ff Жыл бұрын
Totally wrong wrong screw no counter sink bad teachings this is how not to do it