How to service a motorcycle - Kawasaki ZRX1200R and ZRX1100

No video

How to service a motorcycle - Kawasaki ZRX1200R and ZRX1100

Рет қаралды 12,227

Jon's Motorcycle Rescue and Review

Күн бұрын

Пікірлер: 63

@flexjay87 2 жыл бұрын

Kawasaki did a great job designing this bike. It looks fast sitting still :)

@jonsmotorcyclerescueandrev3538 2 жыл бұрын

Happily, in this case, looks aren't deceiving!

@impalaSS65 2 жыл бұрын

Thank you, very well structured and easy to follow. The answer to "what tool?" is the most important and it saves time to know. Thanks you!

@jonsmotorcyclerescueandrev3538 2 жыл бұрын

You're welcome!

@SteveHoward-qf8de Жыл бұрын

Having had a 1100 around 10 years ago, i decided i wanted another, but its been a headache choosing which one to go for. I'm almost 60 years old and no rocket man nowadays. Thank you for helping me decide. I'll just get the best one.

@jonsmotorcyclerescueandrev3538 Жыл бұрын

Right on Steve!

@Spartansrule118 11 ай бұрын

love the zrx content. subscribed!

@jonsmotorcyclerescueandrev3538 11 ай бұрын

Right on, thanks!

@geoffhess2267 4 ай бұрын

Jon, I need to do a service on my GSX650F shortly, so I found this super helpful. Btw, I love the ZRX. Yours is a keeper!

@jonsmotorcyclerescueandrev3538 4 ай бұрын

Right on, thanks, Geoff!

@Lt_dangle 6 ай бұрын

Love it ,about to purchase one soon ,thanks for a video ,

@jonsmotorcyclerescueandrev3538 6 ай бұрын

You're welcome. They are great bikes!

@davidanderson4500 2 жыл бұрын

good vid jon. brill. great bike too.

@jonsmotorcyclerescueandrev3538 2 жыл бұрын

Thanks David!

@m27931 Жыл бұрын

Good video - weirdly the hardest part of maintaining this bike is getting the oil filter back on because the exhaust header is in the way. The best way I found is to get the filter housing on first without the big bolt and hold it in place once you get past the header, then get the bolt with your left hand while you press the filter housing in place with your right hand. Still takes some effort to hold that filter housing up with one hand due to the spring tension, but it’s doable, and easier than trying to get the whole filter unit past the header with the bolt already in it.

@jonsmotorcyclerescueandrev3538 Жыл бұрын

It definitely could be easier.

@michaelZ1B 3 ай бұрын

Yes. The better method (if aligned properly) to enable the long bolt to slide right up just as you say. Otherwise it's a royal pain. The engineering on this part was poor. Even the Shop Manual should suggest what you said as a much preferred method.

@ridehard876 4 ай бұрын

Wow, great video! I have the same bike and this feels like a digital owners manual. Will save lots of time, thanks!

@jonsmotorcyclerescueandrev3538 4 ай бұрын

You're welcome! You can check out my full ZRX playlist if you want more ZRX videos. Cheers!

@ScooterWV 4 ай бұрын

I like how you recommended the Kawasaki oil YOU USE, and then put Mobil One in the bike. GOOD CHOICE, I use Mobil One in just about every vehicle I've owned.

@jonsmotorcyclerescueandrev3538 4 ай бұрын

Oops! Mobile One is a great product. Cheers!

@gilbertreeves2084 2 жыл бұрын

jon..I was thinking of the fan and then you mentioned it.The only thing I wish my zrx had was a temp gauge.The faired zrx`s had one so i think there is a simple solution underneath the gas tank on the the thermo housing.The motor is so understressed they just gave it an overheat light that you can only hope works if the thermostat stay`s closed or you hole the radiator.Loved the vid..Cheers.

@jonsmotorcyclerescueandrev3538 2 жыл бұрын

Thanks Gilbert! I was just out on the ZRX today filming two more comparisons. I was going to mention the lack of temp guage in the video but didn't - it really should have one. But I loved every minute of riding the ZRX. They're great machines!

@jean-yvesmuller9689 10 ай бұрын

Hi, thanks for your tutorial 👍🙂

@jonsmotorcyclerescueandrev3538 10 ай бұрын

You're welcome, Jean!

@LanciaD50 Жыл бұрын

wonderful bike and video

@jonsmotorcyclerescueandrev3538 Жыл бұрын

Thanks!

@LanciaD50 Жыл бұрын

@@jonsmotorcyclerescueandrev3538 i have a zrx 1200 r too :)

@jonsmotorcyclerescueandrev3538 Жыл бұрын

@@LanciaD50 Nice Dan, they're wonderful bikes!

@joehooyen725 2 жыл бұрын

Hi,great video on a beautiful bike. On every bike I have had with that cartridge style oil filter they have always assembled spring , flat washer then oil filter. The flat washer stops the spring from digging into the rubber groumet in the filter.

@jonsmotorcyclerescueandrev3538 2 жыл бұрын

Thanks Joe, you're correct. The flat washer often sticks to the underside of the old filter and gets thrown out. In the past, I have serviced many bikes with the washer missing. In fact, I had to buy one for this ZRX. Thankfully, I've never seen a spring push into a filter without the washer. Why Kawasaki added a part (the cup shaped part that sits on top) to an assembly that is so often improperly installed is beyond me. I specifically included the proper assembly sequence in the video because I've seen it done incorrectly so many times. 🙂 In the past, I serviced a bike with both the spring and washer missing, 🤔 not good.

@jodavey3053 2 жыл бұрын

Hi Jon, ever since I have owned and serviced the bike, the cup that sits on top of the oil filter was missing, and never had any problems, should I buy one and put in in on when I do the next service...... cheers

@jonsmotorcyclerescueandrev3538 2 жыл бұрын

@@jodavey3053 That's a great question. I would first verify that your specific year has the cup. If so, I would get one just for my own peace of mind. If you don't want to get one, I would recommend at least talking to a Kawasaki tech to get their take on it.

@jodavey3053 2 жыл бұрын

@@jonsmotorcyclerescueandrev3538 Thanks Jon

@rustywilliquette2803 Жыл бұрын

Will explain thank you

@jonsmotorcyclerescueandrev3538 Жыл бұрын

You're welcome.

@TimHarakalOfficial 2 жыл бұрын

What can I do of the eccentric marks are not in the same spot? Great video!

@jonsmotorcyclerescueandrev3538 2 жыл бұрын

They should be. You could loosen one pinch bolt and turn that adjuster till it lines up with the other side. You'll probably need to readjust the chain afterwards.

@DrBo1 Жыл бұрын

What is the thing we used to do to the eccentric to rotate it 180 degrees to raise the rear a bit to quicken up the steering. Along with lowering the front a bit.

@jonsmotorcyclerescueandrev3538 Жыл бұрын

Yep, I've done that to a previous ZRX. The ZRX1100 actually handled a bit better with the narrower rear tire and, I think, slightly different chassis geometry.

@benjamincastillo7924 Жыл бұрын

Is there a video out there on how to install stock front turn signals for a 2002 ZRX1200R??? Thanks Benjamin

@jonsmotorcyclerescueandrev3538 Жыл бұрын

I'm sure there is but I didn't make one, sorry.

@vicpnut1 Жыл бұрын

Is the zrx still the 4 carb setup like the inline 4’s I rode in the 1980’s? I ask because I’ve been infatuated with the zrx since I first saw one at Kawasaki showroom back in 2004 +/- …..and I’m now squirreling away any $ I can in hopes of getting a bike by spring…….I’m leaning hard towards either a zrx or a Fz1……or which ever is the best bike/ brand / model similar to those two I can afford when the time comes…..anyways if I am lucky enough to find a zrx in my price range, am curious if I need to stow away extr $$ for a card sync / adjusting …..it’s weird ,when I was young I did all a repairs myself , but my bikes i be felt confident becaus of the way I rode back then ( very punishing on the bikes ) but now not to least alll…if you have any how to’s on carb syncing/ adjusting I be Interested in those too (suppose I should just go to your channel and look lol) …ways great basic service / safety Vid, thanks for posting

@jonsmotorcyclerescueandrev3538 Жыл бұрын

Thanks Vic! Yes, the ZRX is a four carb setup. As long as it runs good when you get it and you winterize it properly, that setup holds a tune for a long time. It's not high maintenance. Good luck in your search!

@vd1170 5 ай бұрын

Hello great video. May i know are these still available to buy in europe? Where can we get spares to keep it running? Thanks for sharing your experience.

@jonsmotorcyclerescueandrev3538 5 ай бұрын

I'm in the US, but I believe they are available on the used motorcycle market in Europe like they are here. Parts can be found through the Kawasaki dealers, scrap yards, online, etc. There is no one-stop shop, and you may need to get creative at times when sourcing parts on any older bike. Cheers!

@vd1170 5 ай бұрын

@@jonsmotorcyclerescueandrev3538 thank you 🙏

@quayinlock 11 ай бұрын

What stand are you using?

@jonsmotorcyclerescueandrev3538 11 ай бұрын

I think it's a PitBull stand.

@michaelZ1B 3 ай бұрын

Says he likes using Kawasaki Oil and he features it. But the video shows him using Mobil 1.

@jonsmotorcyclerescueandrev3538 3 ай бұрын

Good catch. Mobile 1 is a great product, too. Cheers!

@JJ-mh3hb 10 ай бұрын

What are these worth?

@jonsmotorcyclerescueandrev3538 10 ай бұрын

Depends on condition. You can check out NADA guides for the value in your area. Few bikes are in excellent condition. Most nice ones are in the good to very good condition range. Cheers!

@benjaminwilliams3568 2 ай бұрын

Whoaaaaaa?😮 At time Stamp 19.43 you are installing MOBILE OIL, Not the Kawasaki Brand you showed and talked about. What's the Deal Here Neal??? Why Mobile and not The Kawa Engine Oil???

@jonsmotorcyclerescueandrev3538 2 ай бұрын

I have a clean 1 qt Mobile 1 container that I use to measure the precise amount. Sorry for the confusion. Cheers!

@benjaminwilliams3568 2 ай бұрын

No, It's I owing of an apology to you. I made an assumption based on the label of the bottle. I'm wrong I'm sorry.

@jonsmotorcyclerescueandrev3538 2 ай бұрын

@@benjaminwilliams3568 Apology accepted, Benjamin. Cheers!

@richardmerrifield8186 Жыл бұрын

Spray the WD-40 on the cleaning rag ....not directly on the chain .A chain wet with WD-40 will repell the chain lube .Trust me !

@jonsmotorcyclerescueandrev3538 Жыл бұрын

Good to know!

@raf900foss9 25 күн бұрын

mobil 1 is not motorcycle oil

@jonsmotorcyclerescueandrev3538 25 күн бұрын

@@raf900foss9 They make motorcycle oil among their other products. Also, my single-quart Moblil 1 container is what I use to precisely measure oil instead of trying to guess while pouring from a gallon jug. Cheers!