How to service the wheels on your bike. Lubricating the bicycle bearings

Рет қаралды 13,884

Күн бұрын

Hello! Today we will service the wheels of our bicycle. Most of our customers' bikes ride on wheels with loose bearings.
In order for our favorite bike to please us for a long time and ride well, we need to regularly service the wheel hubs.
I'll show you how to disassemble a bicycle hub and wash it properly.
After cleaning, we can inspect the bushing bearings; if everything is in order, then we can reassemble the bushing.
But before assembly, you need to lubricate the bicycle wheel bearings well.
Video without spoken language, enriched by technical audio cues. Universally relatable; presented in a DIY video style.
00:00 How to disassemble a bicycle hub.
01:24 How to remove a brake disc from a bicycle wheel hub.
02:54 How to wash the inside of the wheel hub.
03:23 Bicycle wheel hub cone.
06:07 Lubricating the bicycle bearings.
07:00 How to lubricate bicycle wheel hub bearings.
07:31 How to adjust a bicycle wheel hub.

Пікірлер: 21

@tadi78 20 күн бұрын

Nice Bike Service video, always fun to watch! 😺😺

@NiceBikeService 19 күн бұрын

glad to be of service! thanks for your feedback 😘

@jutjub1691 20 күн бұрын

Thank you for this perfect video !!!

@NiceBikeService 19 күн бұрын

Thank you for your comment! 😍 if you liked this video, share this video with your friends ❤️ it will help the development of the channel! 📈

@user-dp4bq8ny2v 17 күн бұрын

Bel lavoro, complimenti! È possibile sapere che tipo di grasso hai usato per i cuscinetti (marca e nome)? Grazie

@NiceBikeService 17 күн бұрын

Grazie per il suo commento. Per il lubrificante, utilizziamo il grasso di calcio denso Divinol

@benjleath9406 20 күн бұрын

Good Video 👍😁 No Grunting Noises !!! 😂

@NiceBikeService 19 күн бұрын

😸😺👍

@don_SHAKE. 19 күн бұрын

Note from my side :) I think the screw thread should be cleaned of sand before turning

@NiceBikeService 19 күн бұрын

Thank you for your feedback! 😘

@blackIwaterIpark 19 күн бұрын

👍👍👍

@NiceBikeService 19 күн бұрын

😸😺👍

@naromsky 20 күн бұрын

Appreciated. 🙏

@NiceBikeService 19 күн бұрын

thank you for your comment! 😘

@user-xw2cu1dn1y 13 күн бұрын

💯👍👌

@NiceBikeService 12 күн бұрын

😸👋👍

@Gabbro.88 20 күн бұрын

Ciao dove posso trovare queste grosse siringhe che usi per ingrassare i mozzi..su Amazon i??

@NiceBikeService 19 күн бұрын

Le siringhe vengono acquistate in una normale farmacia, mentre i beccucci vengono acquistati in ferramenta o nei grandi mercati online.

@ΑΣΔΦΓΗΞΚΛ 19 күн бұрын

I've known people so fussy they did this every time the bike was exposed to water Both wheels and pedals Is that white spirit? I hate using that, over here we have a product named "elbow grease" bright yellow and pretty cheap - also lemon fresh! Water based and rinsable, make sure to rinse well it's caustic, then dry off and use WD40 to displace the rest

@NiceBikeService 19 күн бұрын

Thanks for the advice, we'll see. We wash very greasy parts with refined gasoline "kalosha", so I understand that the analogue is camping gasoline or coleman (camping) fuel, it has a more or less normal smell. For some tasks, we use sprays, but they are really caustic and better suited to old grease

@ΑΣΔΦΓΗΞΚΛ 18 күн бұрын

@@NiceBikeService ah, OK, that sounds like "white gas" which is expensive over here about £10/litre, I'm supposed to use it in my Whisper lite stove, but regular unleaded is much more cost efficient as a fuel. There's solvent based water rinse degreasers out there but "elbow grease" is better - there was once a similar bike specific one "Dr X's Muc Off" it might still exist, but it was as pricey as white gas - elbow grease is ⅕th the cost and works better. Both elbow grease and Muc Off are spray on, brush in, rinse with water no need for immersion so you don't use much either, and no vapours But it may not make sense outside the UK, solvents and especially alcohols over here are taxed sky high