How to set correct location of the magnets sensor in the gas geyser In Hindi
Like, Share, Subscribe & press the bell icon [🔔]
Share, Support, Subscribe!!!
--------------------------------------------------------------------------------------------
Gas geysers make use of Liquid Petroleum Gas (LPG) for the purpose of heating. These geyser types have no limited power to heat water. Gas geysers provide incessant flow of heated water and supply immediate heating. Gas geysers are less power efficient than electric geysers and have speedy recovery rate
A relay is an electromagnetic switch operated by a relatively small electric current that can turn on or off a much larger electric current. The heart of a relay is an electromagnet (a coil of wire that becomes a temporary magnet when electricity flows through it).
A magnetic switch is just like a light switch: it turns a circuit on or off depending on what position the arm of the switch is in. The only difference is that a magnetic switch is operated by a magnet, rather than your fingers.
Temperature control is a process in which change of temperature of a space (and objects collectively there within) is measured or otherwise detected, and the passage of heat energy into or out of the space is adjusted to achieve a desired average temperature.
Air-conditioners, space-heaters, refrigerators, water-heaters, etc. are examples of devices that perform temperature control. These are often broadly classified as Thermostatically Controlled Loads (TCLs).
A heat exchanger is a device used to transfer heat between two or more fluids. In other words, heat exchangers are used in both cooling and heating processes.[1] The fluids may be separated by a solid wall to prevent mixing or they may be in direct contact.[2] They are widely used in space heating, refrigeration, air conditioning, power stations, chemical plants, petrochemical plants, petroleum refineries, natural-gas processing, and sewage treatment. The classic example of a heat exchanger is found in an internal combustion engine in which a circulating fluid known as engine coolant flows through radiator coils and air flows past the coils, which cools the coolant and heats the incoming air. Another example is the heat sink, which is a passive heat exchanger that transfers the heat generated by an electronic or a mechanical device to a fluid medium, often air or a liquid coolant.
A magnet is a material or object that produces a magnetic field. This magnetic field is invisible but is responsible for the most notable property of a magnet: a force that pulls on other ferromagnetic materials, such as iron, and attracts or repels other magnets.
A permanent magnet is an object made from a material that is magnetized and creates its own persistent magnetic field. An everyday example is a refrigerator magnet used to hold notes on a refrigerator door. Materials that can be magnetized, which are also the ones that are strongly attracted to a magnet, are called ferromagnetic (or ferrimagnetic). These include iron, nickel, cobalt, some alloys of rare-earth metals, and some naturally occurring minerals such as lodestone. Although ferromagnetic (and ferrimagnetic) materials are the only ones attracted to a magnet strongly enough to be commonly considered magnetic, all other substances respond weakly to a magnetic field, by one of several other types of magnetism.
Bosch gas water heaters offer innovative and energy saving features that provide temperature and flow rate control for both single and multi-point hot water systems. Battery Ignition: Two D cell torch batteries provide the power to open the gas solenoid and fire the igniters when the unit detects water flow.
The gas burner fires and the heat exchanger warms the flowing water. Some have a secondary heat exchanger to pre-heat the water, using heat from the exhaust gases. A thermostat modulates the amount of gas that goes to the burner, maintaining the pre-set temperature.
An ignition control module (ICM) is a computer that controls the ignition coil or the ignition coil's firing time. ... The ignition control module relies on the car battery to provide the 'spark' that sets the ignition system in motion and then ultimately turns on the vehicle.
--------------------------------------------------------------------------------------------------
Subscribe: goo.gl/FCzYMF
KZfaq: goo.gl/L4y6mC
Twitter: / yogeshtechnicel
Facebook: / yogeshtechnical
Instagram: / yogeshtechnical
Google Plus: goo.gl/d7gD5o
______________________________________________________
#GasGeyser #GasGeyserFaultFinding #YogeshTechnical
___________________________________________________________________
About : YogeshTechnical is a KZfaq Channel, where you will find Technology videos in Hindi, New Video is Posted Everyday
Thank You For Reading 😀😀🙏😀🙏😀🙏