How to Set Up A Paint Gun

Рет қаралды 21,610

Жыл бұрын

Subscribe to my channel- / chucho1216
Music From This Video from - 🎶www.epidemicsound.com/referra...
Contact Information-J.Lulo_1@yahoo.com
Spray Gun I Use-Sata 4000 B HVLP 1.3 Tip
Pressure Guage-Sata Pressure Guage

Пікірлер: 61

@tompeter7326 11 ай бұрын

Well, the outer scale of the pressure gauge is in BAR so base is in 2 bar, 1st. clear in 3 bar and second clear in 2.5 bar. Anyway thanks a lot for sharing your experience !

@johnjackson6623 10 сағат бұрын

By far this is the best video out there on set up. Teaches on my level. Any tips on spaying urethane on wood? You rock brother.

@J.Lulo_ 8 сағат бұрын

Thank you 🙏 for the kind words I appreciate it. Iam not sure about spraying wood because wood absorbs paint differently than metal. But what you can do is check to see how your application is absorbed into the wood and adjust how much the fluid out affects the finish on what you are spraying.

@davidharrison8397 Жыл бұрын

I have an old sata 3000rp....it's my go to gun. I've got some iwata's and devilbiss guns too......but that sata spray's the best for me. My gun settings are very close to yours....great video

@J.Lulo_ Жыл бұрын

Thanks for the kind words I always appreciate it.

@CustomMinded 6 ай бұрын

J. Lulo, I don't know where you came from but thank goodness i found you. Another clear understanding keep it coming class is in session and I'm learning. 👍

@J.Lulo_ 6 ай бұрын

Thank you 🙏 for the kind words I appreciate it. Iam glad 🙂 your learning from my videos and I will do my best to keep them coming. 👍👍👍

@eapauto Жыл бұрын

Another great video sir. Really enjoy the knowledge you give.

@J.Lulo_ Жыл бұрын

Thank you 🙏 for the kind words I always appreciate it.

@asksteevies4941 3 ай бұрын

Thanks for your experiences, your a good man...

@J.Lulo_ 3 ай бұрын

Thank you 🙏 for the kind words I appreciate it.

@BearBudgetTurbine Жыл бұрын

Newer subscriber. You got some good videos, I need to go back and check out more of them. I'm doing some kind of paint n body work 7 days a week right now as a side gig, and in the evening I catch a few paint videos daily. Always looking for ways to improve

@J.Lulo_ Жыл бұрын

Thanks 🙏 for the kind words I appreciate it. And it sounds like you’re hustling hard man. Remember to take a break sometimes you don’t want to burn yourself out. Good 👍 luck with everything you’re doing and I agree with you it’s always to good to keep improving your techniques. Take care man thanks 🙏 for the love.

@LoloLolo-uk6jy Жыл бұрын

Been trying out your settings over the past week. Getting some really nice finishes. It does look like you set the pressure for the clear at 40 psi.

@J.Lulo_ Жыл бұрын

As long as your jobs are coming out nice 😊 from my instructions iam happy 😃.

@user-zp7bj6vn2q Жыл бұрын

good information to me, thanks

@J.Lulo_ Жыл бұрын

Your welcome 🙏. Thank you 🙏 for the kind words I always appreciate it.

@CoreyHinojosa 2 ай бұрын

nice work brother. I'm running 2 digital 5500 sata, one RP other HVLP, (those are my clear guns 1.2 tips) 1 digital 3000 (base 1.3 tip) and 2 old sata 2000 (sealer and primer 1.4 and 1.5) and an old devilbiss finishline fl03 with the 1.8 tip for heavy primer surfacer. I run all my pressures at 2bar 29psi, fluid wide open (pull the trigger and screw in till i feel the trigger pushing forward. Air all the way open and 1/4 close. for distance from panel pinky and thumb rule for base but closer for clear and run super fast with 80% overlap (just for clear). a little trick I learned about a super flat finish straight out of the gun is that I DA the Primer with 800 and a interface pad. I shoot OMNI which I know it says 400 but was getting to much orange peel and did a experiment with 800 and beautiful. I always tack between each coat of the base. I'm going to try out your setting and see . thanks Corey

@J.Lulo_ 2 ай бұрын

WOW Dude you have a great spray gun collection. I have a SATA HVLP 4000 1.3, SATA jet 100 BF 1.7 primer, and 3M PPS 2 generation spray gun. I really like the 3M spray gun because you can change the tips for whatever the job is. It doesn’t spray as good as the SATA but I like all the options it gives me.

@rickymorenza1742 Жыл бұрын

I’ve been having problems with my clear. Thank you lot of runs and orange peel

@J.Lulo_ Жыл бұрын

Your welcome 🙏. And Thank you 🙏 for the kind words I appreciate it.

@jtekdryice Жыл бұрын

Dope 👌

@J.Lulo_ Жыл бұрын

Thanks 🙏 for the kind words I appreciate it.

@midobanderas4749 3 ай бұрын

U are the best

@J.Lulo_ 3 ай бұрын

Thank you 🙏 for the kind words I appreciate it.

@onurpinarbasi Жыл бұрын

As far as I understand, when making the adjustment of the spray gun, after adjusting the pressure to 2 bars, we leave the fan size fully open and adjust it only by turning the liquid knob from fully closed. We will find out how many rounds we will turn according to the model of the gun and the tip.

@drogba2k10 Жыл бұрын

TOP G

@J.Lulo_ Жыл бұрын

Thanks 🙏 for the kind words I always appreciate it.

@2011NOT2DAY 3 ай бұрын

🔥🚒🔥🚒🔥🚒🔥🚒

@drogba2k10 Жыл бұрын

Video suggestion: mixing paint, ratios. Solvent and water based

@J.Lulo_ Жыл бұрын

Thanks 🙏 for the suggestion I will try to work on a video like that.

@sealisland1 Жыл бұрын

You set that to 3 bar(40psi). 2 bar is 29psi.

@mosespau4908 3 ай бұрын

@LTVoyager 10 ай бұрын

I don’t think you know how to read your pressure gauge. You were setting pressures much higher than what you said you were setting.

@Sno7373anon 2 ай бұрын

What kind of gun is that i love its paint job

@J.Lulo_ 2 ай бұрын

The Spray Gun I used in this video is a SATA 4000 B HEART & SOUL special edition, with a 1.3 HVLP nozzle tip. My favorite Spray Gun since I purchased it. SATA spray guns are one of the most popular spray guns in the industry.

@TJA810 4 ай бұрын

Do you use the same gun for sealer, base and clear? Or do you have separate guns for each?

@J.Lulo_ 3 ай бұрын

I use my paint gun for painting base coat and clear coat. I have a primer gun for spraying primer because you shouldn’t use your paint gun for primer. A primer gun should have a fluid tip of between 1.6 or 1.7 to fill the body filler properly. Now there is a 3M PPS gun that allows you to change the guns tips so you can use one spray gun for everything. Here’s a video I made of the 3M PPS spray gun video link 👉kzfaq.info/get/bejne/jLuepsSE2ae0dqc.htmlsi=V30HIvd7FT1Z_73-

@TJA810 3 ай бұрын

@@J.Lulo_ yea my primer gun is only a 1.4 rn so I've been looking into one with a bigger needle so I'll definitely look into the 3m gun 🙂

@alexextreme3026 10 ай бұрын

Na SATAJET 3000 B RP qual configuração de pressao no manômetro.

@J.Lulo_ 10 ай бұрын

English please.

@haule8418 9 ай бұрын

what tip size are you using for base. is it water or solvent?

@J.Lulo_ 9 ай бұрын

I am using solvent and the size tip iam using is 1.3. The 1.3 tip is the most common used tip for water bourne and for solvent.

@taraz_avto_blesc995 Жыл бұрын

Привет я из Казахстана,хорошая покраска. Для меня SATA 4000/5000 лудшие пистолеты

@J.Lulo_ Жыл бұрын

I don’t understand this language. English please 🙏.

@TheDopeShow81 Жыл бұрын

Holy smokes...start at 2 turns out and adjust from there. Don't start out full or it may get you in trouble.

@J.Lulo_ Жыл бұрын

I close my fluid all the way and then I adjust from there. 2 turns out is a good place to start and then you can keep adjusting from there to get your desired spray pattern depending on the paint you’re using.

@FloridaWild 16 күн бұрын

I don’t count turns. Pull the trigger and hold it. Now turn the knob until it stops. Your fluid is now wide open. Otherwise, you’re choking the gun off.

@J.Lulo_ 16 күн бұрын

I do the count method because I like to adjust the spray gun depending on the kind of clear coat iam spraying. That helps me keep track of the fluid output depending on the viscosity of the clear coat.

@FloridaWild 16 күн бұрын

@@J.Lulo_ I’ve set up guns that way for 30+ years, without issue. Comes down to spray technique also. So many painters don’t realize the distance they should be from the panel for perfect atomization. Most I see are too far out and creates issues with runs. You must perfect your technique with the guns you use and determine the distance from the panel and how fast or slow you need to move. Not a fan of DV1 because it’s too slow for my liking. I can spray with them, but just comes down to personal preference and what feels best for me.

@J.Lulo_ 16 күн бұрын

I agree 💯 percent brother.

@serzgregory9124 6 ай бұрын

SATA HP? Важно всё: температура, вязкость, давление, форма факела, подготовка воздуха, расстояние, качество ЛКМ...

@J.Lulo_ 6 ай бұрын

SATA 4000 B HVLP 1.3 FLUID TIP.

@hobbyautobodyfun9315 9 ай бұрын

I have a 4000

@J.Lulo_ 9 ай бұрын

It’s a great spray gun isn’t. I love my sata 4000. Best spray gun I’ve ever owned.

@TJA810 4 ай бұрын

@@J.Lulo_Have you ever tried sagola paint guns?

@J.Lulo_ 4 ай бұрын

No I haven’t painted with a Sagola paint gun.

@TJA810 3 ай бұрын

@@J.Lulo_ Try one out sometime if you're ever in the market for a new gun. I have a base and clear one and I love them both a lot. Sprays similar to a sata

@J.Lulo_ 3 ай бұрын

Hopefully 🤞 I’ll get to try it one day. Sounds like a cool spray gun.