2 for 2 using the 2 frame nucs with swarm cells this spring. Easy to manage, easy to monitor. One of the better tutorials I have seen on KZfaq. Thanks for providing user friendly instructions without a whole lot of fanfare.

what I love about these is you use the same frame as your typical deep. I tried using the mini frames and it became such a hassle to try and support the mini frames in a standard deep box.

Learned allot from you I started to keep bees watching your videos with others but learn so much from you cause unlike most bee videos you teach lot different alot more than others.love it .thank you.

Hi David Chris from the UK. Great vids, I am learning a lot from them. I am a first year beekeeper, I have done a the two beginner courses. Theory and Practical. And now have my first 12 bar Nuc installed 01 August 19, they are doing fine. Soon putting them away for the winter. Still a lot to learn and you are helping, Many thank.

I'm getting my husband to make some of these right away! What a great system. Thanks much.

David- very informative video. Thank you for taking the time to explain thoroughly!

Thank you, very informative videos! I keep coming back when I have a question about bees.

David i built my mating nucs off your plans and they work AWESOME! I was just at y'all's store Saturday to pick up my nuc and wanted to mention Jimmy and Heather are SO FRIENDLY, KNOWLEDGEABLE AND HELPFUL! In fact Heather is so helpful i went to carry some stuff out to my truck and heard someone not far behind. When i looked back it was a beautiful young lady toten a nuc plum full of bees to put in the bed of my truck. I didn't intend for her to lift that HEAVY thing and was going to come back in and get it. A sight i'm likely to never forget is a beautiful girl toten a box full of bees across the street in downtown Chatsworth :) WAY ABOVE AND BEYOND AWESOME CUSTOMER SERVICE and SATISFACTION! It was the bee's, but not so much the bee's last year that impressed me to be a return customer this year. Honestly y'all are a class act outfit with CLASS ACT CUSTOMER CARE and not to mention something that's nearly GONE WITH THE WIND.....100 % PURE SOUTHERN HOSPITALITY!

Thank You David, been watching a lot of your videos, because you use the same methods as I do. I’ve been keeping bees for about 5-6 years. But end up losing them over Winter, only to have to buy them again every Spring, Extremely Frustrating. But I was trying So Hard not to use very much Pesticides. Going to start using lots now. I even tried using the OTS method, On/The/Spot, which worked pretty well. But I was in the middle of moving, and couldn’t take care of them. Might try again someday. I’ve used the Queen Castle two years and had Success both of them. All four mated and returned both years. I really like your Basically Queen Castle Split Up. I want to try those tiny Nucs, I believe they’ll work Great. Thanks again for all your videos. Keep Buzzing Along.

Yall are awesome helping new beekeepers. Thank you..

Great video David. I built six of these queen mating nucs last fall. Lost all my bees over winter. So I have to start over.

Very informative David. I enjoy your videos along with Mr ED and the Dirt Rooster. Than you. 🐝

Hello, I am new to your videos and I love them. So much information. I am about 2 weeks to starting my 1st Nuc. Yayyyyy

This is what I have been looking for for a long time. I just have a few hives and would like to have my bees survive with a insurance for queens for the season if needed in the late fall if necessary. I will try this year and hope it works.Thank you Barn yard Bees.

man your good! i love these videos King David! your #1 in beekeeping and very valuable to us all!!!

Great vid Dave, the best one for me yet. Can't wait to try this. Thank you.

I just built two of those out of Cedar I transferred two frames can’t wait for a new queen to be born this is so simple I can’t believe thank you so much for the videos I am building at least six more of these my son has a meal we have cedar on the property we have all kinds of cedar to make what we want to make thank you

Thanks Dave for all the info on the Walk away nucs. I watch all of yours and The Fat Man Beekeeper as well as dfisher videos. Very informative, thanks bud.

Thanks David: Built two 2 frame and one 3 frame from scraps. Will do more as a rainy day project.

Thanks dave very informative. Wish you and Jimmy a very good year.

Thank you again for another great video David! i have to try these 2 frame nucs!

I overwintered some 2 frame nucs in southen maine this winter. so far all are still viable, and looking like there gonna make it. i did bring them inside a garage for December, January and February

Another great video, Thanks David

David there was a good wiggle dance going on, on that frame. Good video y'all

These are some of the best ideas I've seen out there! So practical that maybe even I could keep bees successfully. It actually makes me excited! I was wondering- could this mating nuc be downsized slightly to work with medium frames? I'm thinking of going with one size box for my whole operation and would like to use medium 8 frame boxes...Thanks so much for sharing!

Nice tips. Thanks for sharing your experience. Théo (from France)

Great video, you have a nice and productive yet simple style, I like it. I have 3 frame queen castles and I had trouble raising laying workers in the middle nuc. Perhaps the pheremones from the other ones made a conflict for the middle one? I certainly will try your technique here to see if I can get some better results. Once again, thanks for sharing, from Canada

How do you tighten the fishing line on your starter strip frames. Thanks for your time putting these videos out.

I’ve been watching bee videos for 2 years now! Can’t wait to get all my own stuff. I’m going to keep it in my front yard in town due to limited space.

Thanks for the wisdom brethren! One Love, Peace & Fortitude God Bless

hello again David great vids I'm learning so much, I'm so new at this in the video you say make sure you have drones when you start these mini nucs, do you mean have drones in the parent hive or have some drones on the frame you start the mini nuc on? thanks

Thanks for sharing your knowledge kind man! God bless you ❤

Thanks Dave for the excellent video. I have old frames available that some had honey in them which was extracted. Is there any downside to using one of these frames in the queen mating nuc?

Trying to see if i can keep bees in my urban back yard. Thanks for all your information.

Great info. If I try this by removing frames from an existing hive, can I keep the 2 frame nucs next to the original hive, or do I need to move them 2+ miles away?

Great video keep them coming .

hi, great video, Dave, can you show the feeder you made for the 2 hive nuc and how that works?

Excellent videos man.

Awesome video. Can’t wait to give it a try!

Hi. Thanks for this video. I'm going to try if I can get some made. David do you have video on how you add starter strip and fishing line to your frames? I just ordered case of Rite-Cell foundation. Can I rip those down for starter strips? Thanks again. Always appreciate the info.

Fun video. I like your experiment. I'm curious what you think about how far away to put smaller nucs and mini nuc style stuff to keep them from being overwhelmed by nearby large bee hives, especially with a bee yard like yours. Its also really fun to see your bee yard and the rows of hive boxes. It looks very clean and peaceful.

Thank you Dave for all your info! Could you please tell us the inside dimensions? I'd like to use materials on hand.

Good session.....what is pro/con of 2 frame mating Nuc vs using 5 frame Nuc box? Thanks

Great video. I see where you use fishing line on your frames horizontally. Can you briefly tell me how you string it? thanks.

I built 4 of these Nucs yesterday from your cut sheet with just a couple of minor modifications. I cant wait for it to warm up in oHIo!

Thanks for the great videos Dave. Question: I have a hive five weeks out from a package. When I get up to 8-9 frames full I would like to split. Would it be ok to do the split during the summer dearth? and do you recommend a two frame split to make a queen or 5 with mated queen? Suggestions..

Good info. Anyone can do this. So simple yet effective way to raise queens. Thanks

Thank you so much for your video! I am in state WA and it rains a lot. What is your opinion on the plywood material you made your nucs can I cook it in parafin and oil for preservation? Like I mentioned it rains a lot an regular outdoor paint is not helping much.

Thank you for the video. I am a new beekeeper getting my bees (nuc) end of april. My question is: if I am succesful in rearing more queens than I need, what do I do whith the extra queens/nucs? On the nucs that dont rear a queen, do I add those bees back into an existing hive? Thank you, Tami

Hi David, Do you offer a cut list for your viewers for your 5 frame & 2 frame deep nuc? I built 6 deep supers this morning from one sheet of plywood...no rabbet joints...styled like your nuc! Thanks!

superb video.It helps me a lot.

Excellent presentation.

Odlični nukleus, bravo👍

Hello Dave..been watching your channel for a while , and have subscribed for more info...I find your videos very helpful....and am wondering when making queens in these mating nuc ..would you say the frame from the donor hive to use is the one next too the frame you find the queen on? I been looking at my hives and when I spot the Queen I find the frame you speak of to be on either side ????? what is your opinion on this?....I am planing on doing this this weekend....Thanks again for sharing your Journey Robb

Intresting video. Thanks!

I sure do enjoy your video's

Good video David thanks for posting....an ancient Aussie beek

David what is the plan for nucs that dont "take"? Do you just shake them back into an established hive or just add a fresh frame and try again. Thanx

Do you have the directions to make these two frame nuc boxes? Thanks for video very informative. Just getting into raising queens and this looks simple. Thanks!!

Look like great idea I will try this technique and able gifts to our friend. Thank you very much.

Hi David. Great video.. do you have the plans for these mini nucs?

Hi David, this is the video I needed to see! I do want to ask one thing. If I decided to graft some queen cells in this two frame nuc, how many grafts should I put in? I guess I'm worried about too many queens hatching near the same time. Thanks in advance!

Thanks so much for the videos.

IF you let your Queens start lay eggs in the mating nucs could you gather frames from sevral mating nucs and make a nuc to winter?

So basically, you can make queens without seeing queen cells if you have day old eggs and the bees will make a queen out of it. The new queen flies off and comes back to the hive it flew from. One flew the cuckoo's nest and then came back.

super awesome knowledge thanks for sharing

What kind of feeder do you use on the queen mating nuc? Do you screw the nuc to the 4x4’s to keep it from blowing over with spring storms?

When did you make this video, just wondering what month as I want to do some splits as early as possible. I get the night temps and everything just curious how early there’s enough drones usually? I’ve made 20 of these mating nucs and chomping at the bit to get started. Thanks Dave and being an apprentice bee keeper I just love your videos and all the knowledge you freely share, you’re an awesome guy! Thanks, oh and btw I ordered 2 packages from BYB’s and they have done wonderful actually made 7 splits off of them and as of now they’re all doing well! 🐝😊👍

thank you so much great tutorial video

Can't wait to try this.

I need to get some of these 2 frame nucs!

Great channel. I am in the UK but always interesting to see how it is done elsewhere. I like your approach - very natural - letting the bees make their own queens who then mate naturally. I also really like that you allow them lots of natural comb so they can raise as many drones as they want to.

What type of feeder do you use that fits in the mini boxes?

Someone mentioned a cut list for the nucs from the 4x8 sheets of advantech. Do you have a cut list that would cut down on waste when building the nucs?

David can you use a drawn out frame or does it have to be one with a starter strip for the second one? Carl from Michigan

How late is too late to make walk away splits like this? I'm in central Texas. I made one successful spit in March, but 3 didn't produce Queen. But I'm still trying. I'm trying not to take eggs from my two production hives. Or if I can, could you make video on how to do that without demoralizing the colonies? Thanks for all the videos you make available for us all to learn from.

Would it hurt to use foundation frame or a drawn frame for the new frame with the other frame of bees?

I have a question, is it ok to put down landscaping cloth underneath your hives to keep the weed growth down and so I don't have to disturb the bees with weed eating around the hives?

Sir thanks for yr good video.iam an indian bee keeper.

Do you have another yard for the 2 frame hives, so the other hives don't rob them out

great video. very interesting.

Hi David, really love your videos. I saw you gave a dimension list to another commenter, but was wondering if you'd consider making a video of you actually building one. I'm not great at woodworking, and seeing people actually building equipment encourages me. Also, a while back, you made a video of yourself building a fat bee man style feeder for your mini mating nucs. They looked great, but you don't seem to be using them. Was wondering why. Wish I lived closer (central Florida) so I could visit. Maybe one day, but meanwhile keep those videos coming. Thanks again!

what size plywood is that osb i would like to make some of those boxes do you have measurments great videos thanks

how much oxilic acid in a sulimation stick, would you recommend when the 5 frame nuke is 2 or three frames of brood?

When I make my mating NUCs and load them with a ready to emerge queen cell, how far from the donor hive do the NUCs need to be? I'm thinking that the majority of bees in the NUC are nurse bees so it's likely they will stay with the brood. I only have a half acre to work with so, do I need to find a location far away for the NUCs?

Hi Dave, I currently have 5 frame wooden nuc. Can I use a 5 frame nuc as a matting nuc?

This will be my 1st year be keeping I never see honey bees around any of my trees or flowers or garden and I was wondering if I should be worried about a potential lack of drones?

Great video

What happens to the two frame nuc after you use the queen that used to be in it

I love it!! Awesome content as always.. 👍

Dave, do you have a problem with SHB's getting into your pollen patties? I made some pollen Substitute before (made with Honey as a binder) and found plenty of SHB larvae mucking up the pattie. Maybe it's not the same as the store bought pattie, not sure. Do you ever have problems with the SHB's in the mating Nucs?

Thanks for the video

Good videos! Thanks for taking time to share your lessons learned, kudos to ya!

Hi, do you use the queens that these 2 frame mating nucs make? I thought that theses queens are of inferior quality as there aren't enough bees to produce lots of Royal jelly.

You said it is best to do it early in the year. Is mid May too late?

Do you ship bees and supplies at all? I'm located in Albaugh Ga.

If i bought a 5 frame nuc, do you think this would work for me? I live in Louisiana, and have very short winters

Excellent- thanks

What does your feeder look like on that two frame nuc?