In this video, we show you how to set up your foil. Begin by removing your front wing, rear wing, hardware set, fuselage, mast and mast base from the protective carry bag.
Take your fuselage and drop it into the recess on the front wing. Rotate the frontwing over and secure it with the three screws.
Flip the assembly back over and drop the rear wing into the recess on the back of the fuselage and secure it with the two screws.
Take your mast and drop it into the slot in the fuselage. Turn the assembly upside down and secure it with the three screws.
Take your mast base and slide it over the top of the mast before installing it with three screws. Remove the adhesive backing from the rubber anti-chaff pad and install that on top of the mast base.
Take your slotbox screws and thread them through the nuts with the flat sides facing away from the head of the screw.
Take your slotbox screws and slide them into each end of the two slot boxes.
Align your foil with the center of the slotbox and slide each of the screws into the slots in the mast base. Secure each of the four screws.
Your foilboard is now ready for the water.
Produced by Samuel Tomé
Rider David Jeschke
Discover the GUNSAILS HY-Series: gunsails.com/en/wing-foil
#wingfoiling #gunsails #hyseries