That's a valid point. Thank you for mentioning this. As for time lapse, are you talking about video which is technically the only time lapse option there is on those cameras. Or do you mean interval shooting mode?

Time lapse video and thanks for replying so quickly.

You're quite welcome and thank you for the compliment!

@@KobieMC I must have watched it ten times, I am a novice with a k70 and I am just off out with your setting to photo dogs running around in AFC 18-135 DA WR - Thank you....

Thank you. I agree, Pentax rocks!

In the main menu you'd have to set focus peaking. Then when you're manually focusing in live view, just press the "ok" button and it will zoom in. Use the rear dial to increase/decrease the zoom amount. When you no longer need the zoom, just press the "ok" button again.

To change the image preview... Menu> 4> Instant Review. To change the menu colors and the actual brightness of the display etc. Go to the wrench >1 >LCD Display/LCD Display Settings.

I don't understand what you mean.

You could be accidentally changing the drive mode. Have a look here: www.pentaxforums.com/forums/193-pentax-k-70/366026-k-70-drive-mode-button.html

You can change the F/stop by just turning the rear dial when in TAv, Av, or, M modes.

No problem Jackie. Glad to hear (read) it 🙂

The Pentax D-Li 109 Battery is 7.4 volts

@@KobieMC can i use 2000mah?

Sure. That's just a density rating. What's more important is the quality of the battery itself. I've had issues with Hahnel and Power-2000 batteries. I've switched to Newmowa and haven't had an issue since. Others have been happy with Wasabi and Watson batteries as well.

The K-70 is a good camera but get an extended warranty with it just in case. It is a body that may suffer from the Aperture solenoid issue where it will close down the aperture of the lens all the way when the solenoid fails. Doesn't happen to everyone, but it is a thing unfortunately. The KP doesn't suffer from it, but the K-70 is a more economically priced camera. And has the flip out screen vs tilting. It depends on if you want a different camera as the companion, or would a used K-3 as a backup be a better fit for you?

@@KobieMC Good advice Kobie. If I was to purchase used gear where would you suggest is a good retailer for that. I live in Calgary.

Thanks! For used stuff, you can try Henry's, Camera Canada or KEH, Adorama, B&H Photo (KEH, Adorama and B&H ship to Canada, just do the conversion from US dollars first for a better idea on price). I've bought used from Adorama and Henry's and never had an issue, a friend of mine has bought from KEH with no issues as well.

@@KobieMC Thanks for the info Kobie. I will definitely look into it.

Sounds like you have the infamous aperture solenoid failure. Also known as the aperture block failure. There is someone on FB in the Pentaxian group, and I'm sure, on Pentax Forums that do the repair. It needs a better solenoid. Pentax's original supplier cheaped out unfortunately.

Another thing you can do is use a manual aperture lens (don't forget to activate aperture ring in the menu).

@@KobieMC how do I do this

@@beetweet4420 Are you asking, How do you activate "use aperture ring"?

@@KobieMC never mind sorry, I got I figured out

You mean to reset the camera back to factory defaults doesn't work?

@@KobieMC check your insta DM

@@KobieMC thanks for the reply

I haven't had any issues at all. Auto focus in live view was actually a bit faster after the firmware.

@@KobieMC I took the leap and I notice a difference right away. I enjoy taking photos in low light settings and this seems to make things easier... unless Im nuts hahah.

No, not nuts. I think that instead of tweaking firmware to continue improving the K-30, they just moved on and used that firmware for the K-50. Even though they're literally the exact same camera inside.

@@KobieMC Thats too bad. Pentax seems to have a tight community, you'd think the developers would treat them well. Thanks for your videos btw, they're very helpful and Im jealous of your Storm Trooper camera.

I'm a bit surprised about it too to be honest. I'm hoping they've learned, but we'll see. Well, as for the storm trooper... Don't worry, my K-3 is Vader Black lol

Check if you're in Auto or SCN mode. From my K-30 manual, custom image is not available in those modes.

@@KobieMC thank you

@@AOK2Blaze No problem. Hopefully that helped.

@@KobieMC it did solved the problem first decent camera I got but it rocks

Translated from Google: Hello . Very good your video on the configuration of the Pentax K 50. Unfortunately I do not speak or understand English which complicates things a bit. Let me ask you 2 questions. How is it that by framing my shot on the LCD screen the release does not take place while it works in the viewfinder? And why do I have to work at the maximum ISO (51200) with the Il values ​​at most + 5 to hope to have a correct exposure? An explanation would please me, it has been a long time since I tried to solve this problem in vain. Thank you in advance Regards JC English translated to French: Salut JC. Il semble que vous ayez une défaillance du bloc d'ouverture sur votre K-50. L'objectif n'ouvrira pas l'iris même si vous modifiez le réglage. Il sera toujours le plus fermé possible (F/22-F/32). C'est un problème connu et la solution consiste à remplacer la pièce par un nouveau solénoïde/moteur. Pour le déclencheur ne relâchant que dans le viseur, il peut s'agir de réglages que vous avez pour la vue en direct. Ou vous pourriez avoir un problème similaire à mon K-30 où il ne se concentre tout simplement pas, donc il ne tirera pas. Il est difficile de dire ce qui cause ce problème. J'espère que cela vous aide. English: Hi JC. It seems that tou have Aperture block failure on your K-50. The lens wont open the iris even if you change the setting. It will always be as closed down as possible (F/22-F/32). It is a known issue and the fix is to het the part replaced with a new Solenoid/motor. For the shutter button relasing only in the viewfinder, it could be settings you have for live view. Or you could have a similar issue to my K-30 where it just doesnt focus so it wont shoot. It's hard to say what's causing this issue. I hope some of this helps.

Merci pour votre réponse qui confirme ce que je pensais . C'est très aimable à vous car vous êtes le seul à expliquer le pourquoi de la chose . Merci encore et tous mes vœux pour cette nouvelle année .

French to English translation: Thank you for your response which confirms what I thought. It is very kind of you because you are the only one to explain the why of the thing. Thank you again and all my best wishes for the New Year.

Which camera are you using? You'll need to set continuous AF, not auto AF but either spot AF or SEL/zone. Make sure the AF switch on the side of the camera is set to AF.C, Not AF.S or M/MF.

thank u so much idol...is that settings? applicable for panning sir? By the way, I am using K30 lens 55mm-300mm

Also make sure you're using a fast shutter speed.

Which part is it that you're having trouble with?

@@KobieMC all of my pictures and videos are coming out too dark. I'm an amateur and just don't get it.

Oh, it might be an actual fault with the camera (aperture block failure). To rule that out, put the camera in auto or P and take a picture in decent light. If it's still dark, then you most likely have the aperture block failure. Which lens is it that you're using? Do you have another lens you can test with? Best would be a lens with an aperture ring on it that you can adjust manually. Either that or you've accidentally moved the ring to the smallest aperture instead of leaving the ring on "A". Again, I don't know what lenses you're using.

Remove the battery, plug the charger into the wall, and put the battery on the charger.

Unfortunately Pentax doesn't do "clean HDMI" so it won't be only what you recorded. It'll show exactly what's on the back of the screen. You'll need a seperate capture device that would go between the camera and the laptop. I use an older Avermedia Live gamer portable capture card. You'll need a micro HDMI to HDMI adapter as well. If you have a monitor or tv with HDMI you could plug the camera directly into that BUT as I said, it will show exactly what's on the rear LCD. What you'll get from the SD card is what you'd expect. The actual recorded video. Tethering without a clean hdmi signal will always show the red record icon and settings etc. If you're asking "can I use the camera as a webcam to record live directly to my laptop, the answer is, unfortunately no.

@@KobieMC Thanks mate; I've been struggling with this for about 3 hours. It's better to know that it just can't be done than spending 3 more hours on this. I'm heading to Office Depot in an hour to see if they have some sort of El Gato CamLink but in a much cheaper price and see if they can "try" it in the store with my K-50 and my laptop. Otherwise, I'll just buy a webcam. Thanks a lot man; I'm really happy to learn that I should not waste 3 more hours looking for something that doesn't exist [I tried "DigiCam Record", "Imaging Edge" and "SparkoCam" but of course none of those worked]. THANKS FOR CLEARING THIS UP MAN.

Buy a K1

Hmmm, have you tried setting the camera back to factory settings and then check the menus?

@@KobieMC yes. Sadly still the same. There is another reset I can try Really odd Both cameras have non highlighted menu issues Red camera the interval shooting isn’t highlighted but is on the black camera Save user mode good on the red. Not highlighted on the black ...... Both are super low shutter counts too Red is 270 Black is 385 A bummer real that the custom image is inoperable

Interval shooting will only work if I remember correctly, in single drive mode. I think.

@@KobieMC A real bummer that on the black camera the custom image is inoperable 💩 I have joined Pentax Forums. I hope someone there knows something we don’t 👍👍

Have you tried the same lens on both cameras?

That's a personal preference. In the past I've used 4 stars but found the jpegs to be a bit too sharp, so out of habit, I leave it at the manufacturer default.