How To Set Your Timing on any Honda CB Four 69-78

Рет қаралды 10,004

3 жыл бұрын

Mark goes through the steps on how to check and adjust the ignition timing on any Honda CB Four from 69-78 - The CB350F, CB400F, CB500F, CB550F, CB650F and the CB750 - that have a points style ignition system - all the tools you need and detailed description of how to do it - perfect for the beginner or seasoned pro. Cheers!

Пікірлер: 21

@HighMileageOffroad Жыл бұрын

Damn, out of the tons of videos I've watched your was the only one that made any sense and thats because you showed your work and how to use the tool VERY WELL DONE you've helped me more than you know thank you!

@carquestions Жыл бұрын

Anytime RC - cheers from Canada!

@garyhardee2720 2 жыл бұрын

Excellent video. Owners manual ok for checking timing with simple circuit light, but this is great for timing light. Thanks for the clarity.

@carquestions 2 жыл бұрын

Anytime Gary - Cheers from Canada!

@BluemanC 3 жыл бұрын

Righton man! Great tips!

@carquestions 3 жыл бұрын

Anytime Blueman - Cheers!

@savneo 3 жыл бұрын

Great detailed video very helpful, just one note did you set your timing light for 6 degrees as per the manual. I tried at 0 degrees and i was not able to correctly see the F mark. With the light set at 6 degrees it was spot on.

@carquestions 3 жыл бұрын

Saveno - No - my timing light doesn't have that - for your trype of light you should set yours to zero and recheck and set - or try another timing light - something is not right

@Kanes350bigbear Ай бұрын

What should I do if I can't move the plate far enough to get the timing in spec?

@carquestions Ай бұрын

something is wrong then - you may have the timing light on the wrong cylinder - triple check your work - Cheers and keep at it Kanes!

@aidenbailey1234 2 жыл бұрын

Great vid but how do u set the time if the bike won't run

@carquestions 2 жыл бұрын

Aiden - you need four basic things for an engine to run. Air to get in, good compression, fuel and spark - so check your air intake and filter, do a compression check, clean carburetors, check ignition cables and replace spark plugs - let me know how you make out - Cheers from Canada!

@aidenbailey1234 2 жыл бұрын

@@carquestions ok it will run but it takes like an hour to it to crank and it has fuel like it's really hard to actually get it to run

@aidenbailey1234 2 жыл бұрын

@@carquestions and even then it's hard to get it to idle also just letting you know it's a Honda 250 custom

@carquestions 2 жыл бұрын

@@aidenbailey1234 Remove and rebuild the carburetors - will help a lot

@aidenbailey1234 2 жыл бұрын

@@carquestions ok will do I might do a video

@Stripping_Bolts 2 жыл бұрын

Use JIS screwdriver, NOT Phillips on these old Japanese bikes

@carquestions 2 жыл бұрын

Yes SB - should have mentioned that - good advice - Cheers

@Stripping_Bolts 2 жыл бұрын

@@carquestions Do you know why my bike might be leaking white smoke a little bit out of that breather on the top of the engine? Where that tappets and cam are? It's a freshly rebuilt engine bored 50 over only 80 miles on it and I'm not sure if I should be worried about it or not. It's a 75 cb400f