How To Setup A Grandfather Clock In Beat and Regulation To Keep Correct Time part 4 of 4
Рет қаралды 435,563
Күн бұрынLink to this video's blog posting with text summary and hi-res photo gallery.
www.toddfun.com/2016/11/02/how...
In this (part 4) video I show to setup your Grandfather Clock in beat and in regulation so that it keeps perfect time.
Link to my first video on this grandfather clock
www.toddfun.com/2016/01/10/how...
Link to my test Stand build and hammer refurbish video
www.toddfun.com/2016/03/13/gra...
Link to part 1 (Examine clock)
www.toddfun.com/2016/03/14/how...
Link to part 2a (Disassemble clock)
www.toddfun.com/2016/05/30/how...
Link to part 2b (Clean clock)
www.toddfun.com/2016/06/01/how...
Link to part 3 (Oil clock).
www.toddfun.com/2016/08/07/how...
Link to part 4 (Setup clock).
www.toddfun.com/2016/11/02/how...
Shopping:
---------
Clock oil I get on Amazon:
amzn.to/2PeoZgz
Clock grease I get on Amazon:
amzn.to/2PcNVoI
Mainspring Grease Bellows
amzn.to/2VDBjwS
Clock cleaner
amzn.to/2Sixuck
Movement Test Stand P1942 $80.00
www.merritts.com/clock_parts/p...
timesavers.com/i-8950881-grand...
Bushing tools
timesavers.com/i-9500841-clamp...
Shopping and parts for floor clocks:
timesavers.com/
bigbenclocks.com/ecom.asp?
store.howardmiller.com
www.blackforestimports.com
retail.blackforestimports.com/...
www.kieninger.com/english_lang
www.clockworks.com/clock-move...
Useful links on floor clocks:
www.howardmiller.com/
www.clockworks.com/clock-movem...
www.clockworks.com/clock-movem...
www.grandfatherclocks123.com/c...
Thanks for joining and please subscribe to my KZfaq channel.
/ toddrharrison
@DP-sx8nd 2 жыл бұрын
Thank you so much for helping me. My grandma’s grandfather clock was lost to the whole family. They gave it to me after she passed “it’s broken” and now it runs like a top. Each time it chimes, I remember her house as a boy. Thank you
@gethegood 3 жыл бұрын
These may be some of the best how to videos I have ever watch on You Tube. Thank you Todd. My mother just gave me her old grandfather clock circa 1974. I I now feel confident enough to service it.
@ToddFun 3 жыл бұрын
Glad to be of help. Let me know how the servicing goes.
@elaineshapiro8703 7 жыл бұрын
Todd: Your tutorials are EXCELLENT!! I was given a Grandmother clock that hadn't been touched in years and in pretty rough condition. I like challenges soooo... I watched all of your videos and followed your instructions carefully. It took about a week of patience and perseverance but the clock is running and keeping great time!!! Kudos for being so thorough in all that you do!!
@ToddFun 7 жыл бұрын
Wow! That's great to hear. I'm glad to have been of help.
@michellebetke9800 4 жыл бұрын
This video helped me 2 fix the grandfather clock I just purchased. THANK YOU!!! Now the clock runs beautifully!!! THANK YOU 😊
@gamebrain123 5 жыл бұрын
Greetings Todd, I would like to thank you for these informative videos you posted on grandfather clocks. They have helped me greatly in bringing back to life an old grandfather clock I bought with confidence all thanks to you after watching these videos! Keep up the good work! You are a blessing to us all!
@ToddFun 5 жыл бұрын
That is very kind of you. Thanks for the comment, I'm very glad I was able to help.
@catslivesmatter1268 4 жыл бұрын
@@ToddFun question ? Is it a good idea to put some 3in1 Oil on the arm for the pendulum shaft ? I'm having a hard time getting it exactly , either to fast by about 5 minutes in a day or two slow
@catslivesmatter1268 4 жыл бұрын
Excellent video 👌 thanks for your help with this 👍 many people don't get it and I guess I'm one of them , my mantel clock all of a sudden decided to go out of wack What are you using the phone for , that might help me with my situation ? Is there a app to use ? I'm amazed at the information you are giving
@ToddFun 4 жыл бұрын
@@catslivesmatter1268 I used the Apple iPhone with ClockMaster app. It is not free but it is real good and only for the iPhone as of now.
@PowefulSolutions Жыл бұрын
Although my grandfather clock was a different manufacturer and model, this video touched on several issues I was having and helped me correct them. Thank you !
@eastforkfisher 4 жыл бұрын
I’m not sure what would cause 96 people to give you a dislike when you put together such an informative video on something that can help so many of us new to the clock game. Thank you very much, I really enjoyed the video and learned a lot. I’m putting together my grandma and grandpa’s pearl grandfather clock and trying to get it in beat and this video was exactly what I needed. Don’t pay attention to those haters and keep posting great content Todd!
@ToddFun 4 жыл бұрын
Thank you very much for the kind words. do have one more clock video in the can but have not had the time edit it for upload. Editing such videos is about 3 to 4 times as much work as the work to shoot a good video. The last video still in the can is how to successfully drill and place new bushings for wore out pivot holes which is normally the death of must post WW2 clocks as professional rebuilds are almost cost prohibitive nowadays. However with the right simple clock repair tools, supplies, patience and practice it can be done for cheap, however not too practical for 99% of those that want an old clock working again. But for those 1%'ers like me it works and everyone else can try too but most will fail if they do try. Yes, bushing a clock is that hard without the professional $1000 tools. I think I did mine for under $70 in tools and lots of practice on an un-used area of the back clock panel (claim shell).
@eastforkfisher 4 жыл бұрын
Todd Harrison wow that is very interesting and will come in handy for many people who can’t find any info on something like that. Editing the videos Is super time consuming but looks to me like u got it down. Thx again
@robertgillis2697 2 жыл бұрын
maybe 96 KZfaq horologist wannabees who somehow think it will drive viewers away from Todd and toward them?
@maryqcarnes4482 23 күн бұрын
Fools@@robertgillis2697
@terryyouth 6 жыл бұрын
That was spot on. I have been tilting and sloping my clock and still didnt work. This secret worked.. Good work on sharing this. Thanks. I did not take my clock apart. Just played around from the front under the dial and pushed around the base of the pendulum.
@johnrogers2253 3 жыл бұрын
Thanks Todd was a floating pallet unknown to most and sorted... you have a good working knowledge... excellent...
@sgnt9337 6 жыл бұрын
Thanks for posting. Exactly what I was looking for!
@xrgt505 3 жыл бұрын
Thank you. You made a lot of sense on how to calibrate, get BPH on, regulation, and setting the moon phases on an old inherited grandfather clock. It was moved, and lost its calibration. So it's not run for years. Goal has been to get it running again. Your Pic's and descriptions unravelled all the magic. Great Job.
@backyardgarage912 7 жыл бұрын
Awesome Video Todd! Thanks for all the hard work you put into these. I learn so much everytime. Keep chargin'
@ToddFun 7 жыл бұрын
Thanks a ton!
@pederlettstroem980 4 жыл бұрын
What was the name of the app?
@Michael.Chapman 6 жыл бұрын
Thanks for your high-quality advice and demos, delivered by a high-quality video too... I've accumulated five neat antique / vintage clocks all of differing genre, so much appreciated :-)
@ToddFun 6 жыл бұрын
You're welcome. Glad to be of help where I can.
@wdgilmore31169 4 жыл бұрын
@@ToddFun Hello Mr. Todd I Was wondering if you know how I can obtain a illustration or diagram to put my gears back in clock. Took apart to certain point. 😫. Not realizing gears would come out of place. Is this a hopeless situation. ? No Idea on where go couldnt see before thamhe all slip out. Seeking help!!
@ToddFun 4 жыл бұрын
@@wdgilmore31169 Not really but you can take it to any local Horologist and they'll fully understand how to reassemble.
@emmanorgord7849 7 жыл бұрын
finally😫 i've been looking for a good video on how to keep my grandfather clock maintained god bless sir
@delaneydelatorrre 7 жыл бұрын
As I have as well!! I got my grandfather clock when my nana died and I've been so perplexed as to how to maintain it, he's really thorough which I appreciate greatly. Isn't he kinda cute too?! XD
@emmanorgord7849 7 жыл бұрын
So cute!!(;
@emmanorgord7849 7 жыл бұрын
Delaney De La Torre i also enjoy how it's nearly an hour although a full hour would be best! my next request is how to maintain a coo-coo clock !
@ericb4127 4 жыл бұрын
Thank you for this video, my girlfriend recently came back with a Howard Miller model 610-373 I have the center and right weight hung and the clock is working however the left weight pulley is moving back-and-forth freely without engaging anything. I can see a small tabs on the gear connected to the pulley that looks like it's supposed to engage the gear and provide tension. Do you think the tabs bent or broken and is this a problem this particular model clock are you aware of? Thanks for any help
@annmarievoccola9906 3 жыл бұрын
You're the BEST. Thank you SO much for time and patience to try to teach us ALL. Really appreciate it. :-)
@ToddFun 3 жыл бұрын
You are so welcome!
@victormorales3144 7 жыл бұрын
Todd and the group: Happy New Year 2017. Todd you are an amazing Professor. I am a retired Engineer and a Commercial Pilot, living now in Florida. You have been my Mentor and Instructor on this matter (Hobby) for me. I have helped a couple of neighbors already to get their Grandpa and Mantel Clocks going again. They are happy. I just want to say: THANK YOU for sharing your knowledge/experience and not keeping it for yourself. Way to be a real Human Being. Now I have something else to do on my experiments bench, besides teaching, going to the beach and watching the CUBS win. :) Take care. Bless your talents!!
@ToddFun 7 жыл бұрын
Thanks very much Victor! I'm glad to share what I have learned and glad it has help you and your neighbors.
@notmenotmenot99 6 жыл бұрын
Victor Morales rsstRrr
@jimkodysz5404 7 жыл бұрын
Hi Todd, What a beautiful clock! You did an awesome job of servicing it! I hope it lasts for many years.
@ToddFun 7 жыл бұрын
Thanks! there was many hours of research and reading to get through this project. The hardest project yet mostly because I was starting with zero knowledge about mechanical clocks.
@mimishimstudio 4 жыл бұрын
Todd Harrison b
@lavernaspain483 2 жыл бұрын
May 11, 2022. Hi Todd, I have been looking at my deceased husband's grandfather clock for seven years and for the past few days I wrestled with putting the drive chains back on and could not find 18-gauge wire. I found old telephone wire and used it to put on the center chain. So, now that the three chains are on, I am watching your setup grandfather video. I am hoping for the best. Thanks for the excellent video. I may have to watch it several times but Lord willing maybe this week it will be running again.
@neth1968 5 жыл бұрын
hi I have a grandfather clock by Seth Thomas. After the moving the clock stopped working can you tell which of your videos I can use to repair it (that is if it is not very difficult) Thanks.
@coffeeisgood102 7 жыл бұрын
You did a great job explaining on these videos. I am going to subscribe.
@ToddFun 7 жыл бұрын
Thanks! I have one more clock video. I"m doing a DIY home bushing job. Wish me luck because that's going to be a level 9 job and I'm going to try to do it with under $50 in tools. Yikes! I might fail but I need to try.
@highndri1384 6 жыл бұрын
thanks for posting,,,,my dad left me a grandfathers clock and now i will be able to get it working. Well done. very much appreciated. MB
@ToddFun 6 жыл бұрын
Sure thinks. Remember if you run into too much trouble just look up a local Horologist in your area for help. There are some around still ;) And I seem to be able to find most parts and supply at timesavers.com/ however there are others and I have some links in my show notes on my videos and blob postings. Good Luck.
@byecabletv3724 6 жыл бұрын
You are a lifesaver thank you very much I moved the clock to a new shop I'm opening watch battery and band watches are my trade don't know much about clocks but you explained it really well thank you so much got mine taken again.
@ToddFun 6 жыл бұрын
Glad to have helped!
@1straightcut Жыл бұрын
Really excellent instruction on setting beat and regulation - Thank you!
@tboneproductions2453 4 жыл бұрын
Excellent video sir. Thank you
@michaelqi5202 6 жыл бұрын
Great work! Interesting to watch and learn.
@ToddFun 6 жыл бұрын
Great! Glad you liked.
@jonnybenkiki 6 жыл бұрын
You sir are a master. I used your video to set up my grandfather in-law's grandfather clock (having zero clue of how do to so) and watching this video and the chain assembly video, which was the biggest pain in the ass, I was able to fully assemble the clock including getting the tick to a solid 60 bpm.We'll see if it holds. Thank you very much.
@ToddFun 6 жыл бұрын
Glad to have helped. Did you lookup the 60 bpm as the correct number for your clock? If 60 is not correct for your click it will not keep correct time. However if that turns out you can just keep making manual adjustments to the pendulum screw until you get it to keep correct time, just takes many hours if not days to do it without knowing the number for your clock. Let me know how it works out.
@jonnybenkiki 6 жыл бұрын
It was a little off but I've been adjusting it a bit and it seems to be settling.
@ToddFun 6 жыл бұрын
Good to know. Yes, you will get to a point where you have to make small adjustments each weekend for a month then you will find it just changes a bit every weekend no matter the adjustment mostly do to temperature changes in the house over the week. When you're down to about 1 or 2 minute off each winding then just adjust the clock hands not the pendulum when you wind the clock.
@gilbertcisneros8815 2 жыл бұрын
Thank you for great presentation, I learn so much, I was ready to buy new movement, I think I would follow your video and see results. Thank You Again
@kshack9925 Ай бұрын
How do you line up the dial face with the movement gear, I attempted to put face on but it binds.
@mikezeth7184 2 жыл бұрын
Hi Todd I just purchased a Howard Miller gong clock but it’s missing the tubes any idea how or where I can find replacement tubes more importantly how are they mounted
@drummerspenc 4 жыл бұрын
Thank you, Todd, for doing this video. I have regulated my 3-8 day cuckoos with the IOS app nearly as accurately as a Quartz ; which is to say, magnificent, since my oldest cuckoo is circa 1890. BTW, as a fourth generation, north side Chicago native, Go Cubs Go!
@johnbrodehl9743 3 жыл бұрын
I find that very hard to believe. The design of the movement, and the lack of any way of making a precise adjustment to the pendulum, would make that virtually impossible.
@watchtalkandrepair6802 Жыл бұрын
what's the name of the app
@lelesoliveira978 4 ай бұрын
Hello, afternoon!!! I would like to know how to solve the pendulum issue, it works for 5 minutes then stops swinging, what is this happening with my grandfather's watch, could you give me a tip on how to resolve this issue?
@JesseMarrin 5 жыл бұрын
Fantastic video! I tip my hat off to your wealth of knowledge I didn’t even think that there could be an app that could help me with the best. Here I am sitting and listening to the ticking thinking I wonder how far off I actually am? but I shall look no farther
@ToddFun 5 жыл бұрын
Glad to be of help.
@jakemir 9 ай бұрын
Do you have a video showing the clutch adjustment on the pendulum on a Howard Miller
@mikemac2888 6 жыл бұрын
32:20 - wasn't that nine gongs? Still pretty fascinating stuff.
@china-trip Жыл бұрын
My best friend, thanks to you, I enjoyed watching... I'm proud of you for developing day by day.
@ToddFun Жыл бұрын
thanks much!
@HagerHay 2 жыл бұрын
I have a ridgeway and difficult to make run. The escapement can be easily rotated by finger pressure, is that OK??????? Seems it would be rotated just by it running.
@CharlieAnteby 2 жыл бұрын
Thank you for keeping it real.
@premierclocks 2 жыл бұрын
thanks, that's very informative and easy to understand!
@bobg7762 2 жыл бұрын
Todd my clock weight run fast and the other 2 and chimes in the hour and sometimes 15 after. Thanks, see if you can help me
@denaking4624 3 жыл бұрын
I have a cable drive grandfather clock the wheels are off the clock and the cable is just handing how do you put the cable back in place so the weights can hang
@ChuckBronson100 6 жыл бұрын
Hi Todd, can you please tell me or produce a video on how to clean the brass weights and pendulum on the clocks?
@ToddFun 5 жыл бұрын
Well most modern clocks after WWII are clear coated with a lacquer so just warm soap and water. If the lacquer has failed then you will have to clean it with acetone to get all the old lacquer off then buff it with brass cleaning compound until it shines. lacquer it again if you want it not to tarnish for a long time. Or buy new parts at time savers dot come.
@richardpeoples2887 7 жыл бұрын
Excellent tutorial on the mechanism, Do you have a suggestions on where I should start looking to troubleshoot a clock that was working great until it ran out while we were out of town? I have raised the weights, but the clock only runs for a few minutes and then stops.
@johnbrodehl9743 3 жыл бұрын
You're pendulum is most likely out of beat as a result of the movement stopping, while the heavy pendulum continued. Move the pendulum almost all the way over to one side of the case, and then let it go. Hopefully that will set the beat.
@michaelmellard8568 Жыл бұрын
Good afternoon Mr. Harrison, I'm a clock repairman in Conyers, Georgia. What app are you using to adjust the clocks timing using your cellphone? I normally just listen for the tick & tock to be even. Thanks.
@AnonymousWithin Жыл бұрын
I love your videos and your clock work!
@ToddFun Жыл бұрын
Yay! Thank you!
@elizabethattwood2444 Жыл бұрын
Thanks Todd, I did find an adjustable leader which looks as though it will fit. I may have to drill another slot for the catchment lever, and a difference in length of 1/4 " should be absorbed in the pendulum bob adjustment. Thanks for your help
@ToddFun Жыл бұрын
Glad to help
@j.d.8081 3 жыл бұрын
Todd, thank you so much for that instructive video! A question here: I have an antique Colonial of Zeeland « Grandmother » clock from 1919, with tubes bells just like the Howard Miller you’re showing in your video. I was wondering how I can manage to find back that smooth sound of yours. I believe that the leather on the hammers had never been changed. But can it be the tubes that got a bit to low with time? They were thightly attached so I don’t understand why I can’t hear those fine harmonics instead of a quite metallic short sound. Can you think of a solution?
@ToddFun 3 жыл бұрын
My tubes hang from cat cut but dental floss should work too. I changed the hammer leather on min and used a bit thinker leather I got from a shoe and belt repair shop and cut out myself. I have a video on that process which made the biggest difference to the sound. www.toddfun.com/2016/03/13/grandfather-clock-test-stand-and-hammer-refurbish/
@j.d.8081 3 жыл бұрын
Todd Harrison Thank you very much for the advice ! I sure will watch your video. Stay safe!
@bones007able 5 жыл бұрын
We purchased our clock in 96... we wind it once a week , keeps time perfectly... we followed the instructions when we got it and set it up and it has been going for 22 years now...
@ToddFun 5 жыл бұрын
Awesome! Very well made clock and great ownership and care go a long way.
@frankfam8617 7 жыл бұрын
Hi Todd, i replaced the part, oiled and greased as you said, now the clock works for a few minutes and it stops the clock is leveled the chains and weights are placed, what do you think?
@ToddFun 7 жыл бұрын
Must have bad pivot points. Once you have even a little wear in the pivots it will stop.
@kusmanf 7 жыл бұрын
Todd, I have a problem with my grandfather clock running. I checked the level and recently oiled the machine too. When given a push to the pendulum it runs for minutes and stops and sometime runs for hours and may be a day or two and stops. My clock is Ridgeway 114cm/60 (481-853 C SK). As in your part 4 video I checked up the pendulum movement and the tick-tock is not correct and the pendulum runs beyond the tock. As in your video my one does not have a crutch clutch adjustment and if I am to adjust the beat how should I adjust and what part of the clock? Please help me with your valuable advice.
@ToddFun 7 жыл бұрын
I would need to see pictures and even then it might be hard. The crutch will have an adjustment like a clutch but if the crutch is just a bit of wire then you simply bend the crutch wire a little on one direction to make the correction. You can find my email on my about page in the show notes if you want to take photos.
@cruzenforabruisen6368 4 жыл бұрын
great job very informative thanks!!
@ToddFun 4 жыл бұрын
Thanks for watching!
@TheDtrolinder 3 жыл бұрын
Hi . Thanks for your service. I have a pearl grandfather. The three weights , two are about the same weight. The third is about 3 pounds heavier. Can you tell me where the heaviest weight goes. Left, middle or right side. Thanks again..
@ToddFun 3 жыл бұрын
Heaviest from right to left. kzfaq.info/get/bejne/qcx9pNtpprrdc6s.html
@keithmccauley4512 2 жыл бұрын
Appreciate you Tom it was really helpful stay out there man and be safe Jesus name
@user-rq9po2zv4k 3 ай бұрын
Дуже важливо знати, дякую вам за працю 😊❤
@williamhanna5224 4 жыл бұрын
Great job awesome clock !
@ToddFun 4 жыл бұрын
Thank you! Cheers!
@elizabethattwood2444 Жыл бұрын
Hi Todd, I have watched lots of you videos and have set my clock up referring to them. I saw a video you posted showing an adjustable leader for a Howard Miller G/Father clock, which had an adjustable leader. It had a rotating cam at the top. I have been looking for one to fit to my clock. Do you know where I could find one. i find the adjustment on my clock keeps going out, and it is very temperamental to adjust? I would appreciate any help with this. Thank You.........!
@ToddFun Жыл бұрын
Not sure if you could get one or modify one that would fit but try timesavers.com/
@jimc4731 5 жыл бұрын
If you have an antique clock, how do you derive the number ( yours is 3870 ) for setting the beat when there is no one to ask? I tried to find the App, "Clock Master" without result? Was it discontinued? I liked your video very much. JIM
@ToddFun 5 жыл бұрын
If you can read the make and model numbers stamped on the back plate I might be able to help. Otherwise just let it run and if looses time raise the pendulum bob and if it gains time lower the pendulum bob. It will take a week or longer but once you get it spot on then take a reading of how many beats per hour and write it on the back of the clock or in a note book you keep in the clock.
@RobStone84 4 жыл бұрын
Question regarding activation of gong and other things at top of the hour. My cuckoo clock is activating everything 2 minutes past the top of the hour. I noticed you mention to spin the minute hand on its rivet slightly. My clock does not have a rivet on the plastic minute hand. Is there an adjustment that can be made to dial in the activation of everything at top of hour? Thanks! Love your vids!
@ToddFun 4 жыл бұрын
Darn I wouldn't know about a cuckoo clock. Strange it doesn't have a rivet. I guess it is a square hole that is in the minute hand. You might have to take it to a horologist to see if there is a cam with a set screw that can be tweaked a little or something but I wouldn't know. Maybe somebody else in the comments will replay.
@johnbrodehl9743 3 жыл бұрын
First of all, it is a bushing, not a rivet. Antique cuckoos don't have the bushing. The hand is directly on the center shaft. It is possible that the movement has shifted in the case, causing the hand to be off. Other wise, the movement will need to be removed from the case to make the adjustment.
@flaviothepage 4 жыл бұрын
I have an Urgos clock recently overhauled, but it's chiming just the Westminster Melody out of three. I really don't know what's happening, and the watchmaker either! What can be happening?
@ToddFun 4 жыл бұрын
Something didn't get put back together correctly that switches the melody sprockets.
@lisetteneubauer7289 3 жыл бұрын
Great video Todd! I just bought this used clock today! Same cabinet with a slight difference but almost identical to yours. I was searching for the style since I didn’t see it anywhere on the web.I almost doubted it was a Howard Miller but, now I know it’s the real deal! Only difference is I have a different moon face. Do you have a video on how you cleaned the cabinet? Also, my pendulum is a little dirty, what would you use to clean brass and how do you stop it to clean it. Thanks in advance
@ToddFun 3 жыл бұрын
Yes, I think the first video in my playlist here: kzfaq.info/sun/PL40clH-yZ7flbW79e7sXZ8Ws9sJbA5zFj
@frankfam8617 7 жыл бұрын
I could get it to work. How do i find out about beat per hours for Jauch PL 78?
@ToddFun 7 жыл бұрын
I don't know but you can always do it old school. Just get it close make small adjustments every, 15 minutes, hour, day until it takes a week to get off. At that point it will be at its best as these types of clocks will need a small adjustment once a week or once a month.
@andywin7419 4 жыл бұрын
Todd, my problem is when the clock was 12:00 it only struck 6 times, so we are always short with 6 strikes on my grandfather clock. The rest of the clock works perfectly! Can you advise, how can I reset the clock ?
@SumProject18 3 жыл бұрын
Move the minute hand to allow the clock to strike the hour. Move the hour hand to the number on the dial to however many chimes you hear (This sets the chime to the correct hour.)
@edarmstrong6986 6 жыл бұрын
Todd, I am attempting to fix a vintage Colonial Grandfather Clock for an elderly woman in my church at no charge. I have no clock experience to speak of, but I have enjoyed repairing a number of other vintage items. I was told that the clock was cleaned, oiled and serviced on regular basis by a professional clocksmith up to about 4 years ago when he passed away. The clock is running fast, gains about 1 hour every 24 hours. I applied your pendulum test using a blank piece of paper, the pendulum appears to be tick tock-ing at a balanced beat, however the pendulum has a slight wobble as it swings back and forth, Also the clock has a "second hand" display that seems to consistently jump ahead 2 or 3 seconds at the 20 second mark. Any suggestions would be appreciated. I have photos and videos if that would help. thank you, Ed
@ToddFun 6 жыл бұрын
Check to see if the pendulum spring is bent, cracked, broken partly or twisted in some way. You could have some bad gear issues or just about anything else really. This might require another Horologist expert in your area before you get too deep into it I'm afraid. www.google.com/search?q=grandfather+clock+pendulum+spring&rlz=1C1GGRV_enUS753US753&source=lnms&tbm=isch&sa=X&ved=0ahUKEwiZs8uHvPvYAhUr_4MKHSRgCnYQ_AUICygC&biw=1920&bih=974 If it's just the spring and you can get the make/model numbers off the back plate you can order a new one from: timesavers.com/
@edarmstrong6986 6 жыл бұрын
Todd, thanks for replying so quickly, I will check the pendulum spring.
@eeandersen 6 жыл бұрын
You can get many new pendulum springs from timesavers.com/, I did! There is a premium for small orders, but it may be the only port in a storm, if you know what I mean.
@eeandersen 6 жыл бұрын
Nice work, thanks. Very personable presentation with good detail. Speaking for the content of the series, as I watched I felt that I was listening to a good mentor. Working on a tired grandfather clock from the 70's, I followed the cleaning, oiling and now working on getting the right beat. In the process of cleaning, I found a badly wallowed out pivot in the chime mechanism. I suppose I can live without Westminster chimes; but I'd like to see and follow your re-bush video when it comes!
@ToddFun 6 жыл бұрын
Thanks for the kind comments. I have the base tools and I'm practicing on re-bushing now. I think I have it down where others can follow simple instructions including the most inexpensive tools possible and instructions on how to order correct bushing and drills for the job. I just have to shoot the video on a practice click and then compile the instructions and links. Maybe before summer if all goes to plan.
@eeandersen 6 жыл бұрын
Couldn't get the clock into beat. Ended up buying a new pallet from timesavers.com/ for $11. The old was bent a little and when I looked at the two side by side, I decided not to try to straighten the old one first. Since it is adjustable on my Hermle 451, I had to guess at proper orientation of the anvils (?). Now, the clock is in beat (lucky guess), next trying to see what I can do for the chiming.
@BradfordNeedham 5 жыл бұрын
The Wikipedia page on Westminster Quarters gives the tune in musical notation. It also has a Midi recording of the tune, so you can compare it to your own clock's quarters when aligning the musical drum. I always thought the quarters were just shortened versions of what's played on the hour, but not so. en.wikipedia.org/wiki/Westminster_Quarters
@sputnik4216 11 ай бұрын
Now you need a Renoir or nice Van Gogh painting on the wall flanking that clock! Lookin' good!
@Benicio_Fols Жыл бұрын
Hi if I put a quartz clock and I’d the ticks from my grandfather are the same as the quartz clock, is it in beat?
@ToddFun Жыл бұрын
no, not guaranteed. The tick needs to be the same as the toc sounds on the clock.
@SumProject18 3 жыл бұрын
My grandma's clock that i repaired works amazingly, just doesn't keep time very well. When adjusting the pendulum, with a week it'll either be 5 mins ahead or 5 mins behind. Should each tick-tock be 1 second apart, like a battery mech?
@ToddFun 3 жыл бұрын
No a tick tock does not need to be 1 second. If it is off by 5 min in a week then just give the pendulum bob nut a little twist, up to run faster, down to run slower and then give it another week. If it is always off it could just be the quality of the clock or some age to the moving parts showing.
@johnbrodehl9743 3 жыл бұрын
These antique American clocks were typically only accurate within 5 minutes a week. It will gain time at first, then even out, then lose time. Adjust the pendulum to find a happy medium.
@michaelbauers8800 7 жыл бұрын
Nice BBT t-shirt :)
@poipoiparty8427 3 ай бұрын
I have this exact one. So this video is perfect for me. Now I just need motivation to actually do it...
@ilkosj 6 жыл бұрын
I have Seth Thomas clock tha is late as 2 minutes on every 12h. I cleaned and lubricated as you recommended. I set the weight on the pendulum as high as I can. What else I can do?
@ToddFun 6 жыл бұрын
Are you 100% sure the pendulum you are using is original to this clock?
@ilkosj 6 жыл бұрын
No, I'm not an expert. The clock belonged to my mother in law, after she moved se put it on the ground and stay for years without working then she give it to jewellery store guy to repair it and put the clock in our house but he couldn't make it work so I took over.
@ToddFun 6 жыл бұрын
Classical example. Thanks. People know to remove the pendulum and weights when moving a clock and many times the pendulum gets separated from the clock as it is moved around. Then when somebody like a "jewelry store" gets the clock to repair they order a replacement pendulum that isn't the correct length thinking all grandfather clock pendulums must be the same. Sometimes weights are replaced incorrectly in the same way. Lets start with taking out the clock mechanism and reading all the numbers off the back plate. We might get a model number that I can use to lookup the correct weights and pendulum length. Assuming there are no other incorrect parts, missing parts or worn out parts we might be able to figure something out quick. If not, then it would get expensive to track down the problem at which time you might consider taking it to a Horologist in area to get a professional evaluation or just put the money directly into a known working clock.
@travisarp1677 7 жыл бұрын
Great job!!!!!!
@ToddFun 7 жыл бұрын
Thanks Travis!
@sarasarah723 2 жыл бұрын
Thank you !!! I never knew how to set the moon!
@aaronstepp1062 3 жыл бұрын
I have a Ridgway grandfather clock and it's chming the wrong time of minutes you have any advice I would fix it without breaking it
@ToddFun 3 жыл бұрын
Could be just about anything. If you're not comfortable servicing your clock it is best to look up a local Horologist and have them service the clock.
@garynaskrent7500 3 ай бұрын
I have a Pearl G.F. clock. The right and left weights do not go down, only the center one goes down. Have an idea of what could be wrong? Everything else works.
@ToddFun 3 ай бұрын
Are you sure it’s not as simple as the silence switch is engaged? Most such clocks have a lever on the right side of the face plate to switch on silent mode which just stops the gears for the left and right weights but lets the center time gears and weight to move.
@aservant2287 4 жыл бұрын
Hi, Mr. Todd, I was given a small winding clock by a costumer, like a small grandfather clock. It has the key but the pendulum is just a straight rod with a round weight out the bottom. It has a hole in the back and on the face. Can you help me along with how to properly winding up and set the time. I don't want to damage anything and I know nothing about these clocks. Thanks for your time
@ToddFun 4 жыл бұрын
Sorry, I really wouldn't know.
@aservant2287 4 жыл бұрын
@@ToddFun ok. Thanks for the attempt to help. Be blessed
@johnsujith12 Жыл бұрын
Excellent video!!!
@ToddFun Жыл бұрын
Thank you very much!
@showandgo 3 жыл бұрын
Please help. I have HM GFC, it is ticking backwards, any thoughts? Thank!
@johnbrodehl9743 3 жыл бұрын
Ticking backwards?
@jr2201 7 жыл бұрын
Todd, your Westminster chime is off by 4 notes. Your ending on the 3/4 chime prior to the hour strike. Sounds like your hammer drive cam is out of alignment for the start and stop points.
@ToddFun 7 жыл бұрын
I know. I fixed it and made a video on the correction: kzfaq.info/get/bejne/a9mWq5xh16fapKc.html
@lonnypaynelonnypayne6172 Жыл бұрын
How can I get some one to come to my home to get my grandfather clock running? Some that don't have come across countrie some one close to Delaware County Indiana.
@ToddFun Жыл бұрын
google or yellow pages for a local horologist.
@fredflintstone8048 3 ай бұрын
Thanks for sharing.
@doumb1555 3 жыл бұрын
HI Todd i was wondering where i can find the bph or bpm for different models of clock not sure i got the info right ... is there a web site or.. thanks fpr your video i fixed and clean my 5 th grandfather clock soon thanks again hope your well! DOMINIC.
@ToddFun 3 жыл бұрын
There are 35 pages of different clocks here, you might find yours: minnesotawatches.com/clock-beat-rates/ It can be calculated using either of these pages but much more difficult. www.angelfire.com/ut/horology/Pendulum.html theindex.nawcc.org/CalcPendulumLength.php
@doumb1555 3 жыл бұрын
@@ToddFun thank you so much mr. Harrison i saved both links and will look it up i already found two of my clocks. Thanks for the help! Hope yoir well amd stay safe in this pandemic world... Dominic
@SniffaThumb 2 ай бұрын
You are great! Thanks.
@t.kaygooding5256 6 жыл бұрын
the weights dont have left right and center on them, how do you know which one goes where?
@ToddFun 6 жыл бұрын
I wouldn't be the person that could tell you 100%. From what I have learned the heaviest goes on the right and the lightest goes on the left. However that could be different base on how the gear train is designed. Sorry I couldn't be of more help. Maybe you can lookup a local horologist in your area and ask if they have more information.
@aztecahernandez6539 3 жыл бұрын
Thank you bbberrry much Teacher. Now to fix the Grandmother clock.
@ToddFun 3 жыл бұрын
You're welcome
@nugrohotrikopramono Жыл бұрын
Good sharing..., thanks👍👍🙏
@ToddFun Жыл бұрын
Thanks for visiting
@Wbangsarrr 5 жыл бұрын
Hello bro can I know what the size pendulum it's it 114cm 116cm tq
@ToddFun 5 жыл бұрын
Mine is 100 cm
@johndyer1297 2 жыл бұрын
I can not find the grease on Amazon. It is out of stock. Do you have another source for this product?
@ToddFun 2 жыл бұрын
timesavers.com/i-8944621-moebius-8300-8301-spring-grease-20cc.html
@celiastevens1829 2 ай бұрын
Thank you so much for creating these amazing videos! I have been given a grandfather clock that my great grandfather built, so it's been amazing to have it running again! Do you have any tips on how to get the hour to chime on the hour and not a minute past? Each other chime line up perfectly with no issues. It is just the hour that is slightly off. This is the first time it has been running in over 40 years.
@ToddFun 2 ай бұрын
normally the hour hand is just press fit. When it chimes take off the minute hand and pull off the hour hand and press it back on on the hour. if it’s the minute hand that is off take it off and use a pliers to gently turn the nut on the back of the minute hand to correct pointer. the nut is normal pressed into a rotatable bracket if some pressure is used with a pliers. but if you say it’s ok pointing at 15,30,45 the that process will mess things up.
@celiastevens1829 2 ай бұрын
I understand and I may just leave it then. It is the minute hand that is a minute past before it chimes the full hour. Your videos have been a great help! I'm working on cleaning up and setting up a second movement that needs some care. This has been so fun and rewarding to do.
@V.G.F. Жыл бұрын
Do I have to count 129 or 128 minutes for every clock or does it matter what model?
@ToddFun Жыл бұрын
It matters for each model
@johnrogers2253 3 жыл бұрын
Hi Todd can you help me with an Urgos pallet shaft.. needs tightening... I,d really appreciate it.. John...
@ToddFun 3 жыл бұрын
Sorry, not something I do. Google for a local horologist.
@johnbrodehl9743 3 жыл бұрын
How loose is it? Is there a set screw? Some of these are only friction tight to allow the beat to be set.
@danoberste8146 7 жыл бұрын
It's 3am. Go to be Todd. {Thanks for the video} ( { } = in a hushed tone. )
@geoffreysykes1362 6 ай бұрын
Hi Tod the descending 4 note are quarter past and the last 4 notes of the three quarter on a Westminster chime,you have them set wrong as the last 4 notes of the hour chime.
@ToddFun 6 ай бұрын
I know. I fix it already. Thanks.
@alinatamang5937 5 жыл бұрын
Can you manage me where its find I need to buy this clock price?
@frakenfish1 4 жыл бұрын
Thanks Todd
@ToddFun 4 жыл бұрын
Very welcome Fraken.
@maryhummel9926 Жыл бұрын
I have grandfather clock, floor it doesn't work. How to start it?
@franknovelli3529 3 жыл бұрын
Have grandfather clock all weight are completely down still chimes
@frakenfish1 4 жыл бұрын
I have to tilt the clock face to keep it from stopping, why is this...? Thanks
@johnbrodehl9743 3 жыл бұрын
What do you mean, tilt the clock face?
@hakouhayou 3 жыл бұрын
Hey i have a tempus fugit clock that stop after 5 minute every 5 minute i have to push the pendulum again can you help to solve this problem!?
@ToddFun 3 жыл бұрын
Many many many possible problems. if you values the clock and want it working it's best to take it to a local Horologist for service. It might need a good cleaning and oiling or it could be warn out and need rebuilding. Could be bent pivot shaft, cracked suspension spring or just not level. So so many possible issues.
@hakouhayou 3 жыл бұрын
@@ToddFun thank you very much for your response
@user-pp8qd6fs4k 4 жыл бұрын
Какая суточная погрешность данных часов в секундах?
Born Again Clocks
Рет қаралды 257 М.
David Harper Antiques TV!
Рет қаралды 37 М.
Clock Shop
Рет қаралды 122 М.
Live Free
Рет қаралды 355 М.