How to Setup and Level Artillery Hornet 3D Printer with Test Print
Рет қаралды 8,226
2 жыл бұрынGet the Artillery Hornet 3D Printer on Geekbuying bit.ly/3rDfb57
Use Coupon Code: NNNDGBGAH3D and get this printer for only $169.99 for the first 50 people who purchase with the code.
Merl unboxes, assembles and then levels the Artillery Hornet 3D Printer showing you how to get everything up and running to start your first 3D test print. Note multiple passes of leveling were done, only the first pass was shown in video with calling out 2 additional passes were done after.
#3dprinting #artilleryhornet #geekbuying
💯Disclaimer: We may make affiliate commissions if you buy from one of our links. All of our reviews are 100% honest and reviewers opinion alone. #commissionearned
Did you find the content useful, helpful or entertaining?
☕Consider buying us a coffee www.buymeacoffee.com/dragonbl... ☕
Most videos edited and produced with Filmora on this Channel.
✅ Download Filmora www.dragonblogger.com/suggest...
✅ Filmstocks Effects www.dragonblogger.com/suggest...
✅ ProductionCrate Effects www.dragonblogger.com/suggest...
Want your product (hardware or software) unboxed, reviewed or showcased to our audience and channels? You can fill out a request here www.dragonblogger.com/product-...
we welcome working with new brands and always give 100% honest opinions.
@3dthailandhappy3d-thailand46 Жыл бұрын
Yup. wrong way to level the Hornet bed. at 15;14 you should have gone to "level corners"that is the 4 corner and centre level using the physical bed adjust knobs. once that is done. you should do "level bed"click to begin 1-9starts the software MBL. You use paper under the nozzle but you use the knob next to the screen to lower or raise the hotend from the bed. still need the nozzle scraping lightly on the paper..once happy on each probe point, press the knob to go to the next one..This is Manual Mesh bed levelling..basically auto levelling but you are the Bl touch.
@FelipeGonzalezHerrera Жыл бұрын
Wrong way to level the bed and... why were you trying to tighten the belt with the eccentric nut?
@pjqazi9647 Жыл бұрын
the leveling of the bed is wrong and the loading of the filament is wrong, I still haven't watched it
@yno3837 2 жыл бұрын
thats the wrong way to level the bed...
@nebbus 2 жыл бұрын
what is the right way then please ? any vid that describe the right process on the Hornet somewhere ?
@yno3837 2 жыл бұрын
@@nebbus first manual level, then MBL
tr3nD maker
Рет қаралды 112 М.
kukomio
Рет қаралды 3,8 М.
Ricky Impey
Рет қаралды 363 М.