How to Setup Home assistant on Ubuntu (supervised) from scratch as virtual machine (KVM)
Рет қаралды 48,982
3 жыл бұрынFind out how to install Home assistant (supervised) from scratch on UBUNTU as virtual machine using the KVM Hypervisor.
Really want to show your appreciation? You can always "Buy me a beer"...
www.buymeacoffee.com/homesight
Commands:
ifconfig
iptables -I FORWARD -o virbr0 -d 192.168.122.242 -j ACCEPT
- virbr0 = Virtual interface name (Gateway)
- 192.168.122.242 = Virtual Machine IP Address
iptables -t nat -I PREROUTING -p tcp --dport 80 -j DNAT --to 192.168.122.242:8123
- 80 = incoming port (80 is the standard web port)
- 192.168.122.242:8123 = Home Assistant Virtual Machine Address + :8123
- NOTE: You'll need this command for any additional ports you need forwarded eg (1883 for MQTT)
** IF YOU WANT TO MAKE THE IPTABLES RULES PERMANENT, RUN THE FOLLOWING **
iptables-save
Music: www.bensound.com
Video: Free Stock Video Footage by Videezy!
@malcolmmcgrath9344 Жыл бұрын
Thanks to your clear instructions I have installed Ubuntu 22.04 on an old PC then KVM then Home Assistant and can now access it from my Windows 10 machine. Thank you very much !
@andrieshatane8503 2 жыл бұрын
Thanks for adding the Networking side of things....
@HomeSight 2 жыл бұрын
You’re welcome. Glad it was helpful.
@ThijmenCodes 2 жыл бұрын
Thank you, great tutorial and easy to follow. Love how chill you explain everything. Have a good evening!
@HomeSight 2 жыл бұрын
Thanks!
@alm0stbeast Жыл бұрын
THANK YOU, i spent all day trying to figure it out
@carlitoscris 5 ай бұрын
you just solved in 10 minutes what i've been struggling with the last couple of days.. Than you!!
@gerolori Жыл бұрын
thanks a lot for the video, i wouldn't have made it without you One thing that i wanted to point out if anyone else wanted to use the server for something else, when you're configuring the prerouting, instead of port 80 (which is a commonly used port) you can route the exact 8123 port or anything else, to display there home assistant, so that if you type your server ip address on your browser, you won't only get the home assistant side of things (there's plenty of cool dashboards to display all the current services installed on your server). Thanks again man, happy tinkering everyone
@reyos110 2 жыл бұрын
Thank You So Much For The Great Video. Everything Explained Simple And I Found No Issues With The Tutorial. Appreciate The Good Work.
@HomeSight 2 жыл бұрын
Thanks for watching Rey, glad it worked out for you
@nikolajschulz5515 Жыл бұрын
Great video. Worked well for me on Ubuntu 22-04 :)
@slj3458 2 жыл бұрын
I am giggling like a 5-year-old, seeing this ip-tables magic! I could not click "Like" and "Subscribe" quickly enough. Rarely do I get what I want for Christmas, but you changed that--thank you for getting me out of the VirtualBox rabbit hole.
@HomeSight 2 жыл бұрын
You’re very welcome Scott! Glad to help!!!
@chewitt86 3 жыл бұрын
Great video! I'm rather jealous because starting a youtube channel and talking about the exact things you're talking about is what I've wanted to do for ages but never had the courage. It's like you've taken me and my brain but created something better than I ever could. Keep up the good work!
@HomeSight 3 жыл бұрын
Thanks James. I got fed up of watching out dated videos, so have tried to make videos that I would have wanted to watch!
@chewitt86 3 жыл бұрын
@@HomeSight totally get it! This one is particularly pertinent to me as I've been looking to move away from a docker container to a virtual machine in Ubuntu. Although very recently I've debating just building an unpaid server
@chewitt86 3 жыл бұрын
@@HomeSight do you have or have you thought about starting a discord server?
@dickwans 2 жыл бұрын
And I'm still here wanting to create a video on this topic ^^ Great job!
@ThomasFauskanger 3 жыл бұрын
Very well explained. Thank you!
@HomeSight 3 жыл бұрын
You’re very welcome, thanks for watching!
@martink9785 3 жыл бұрын
Thanks, I think I had only welcome to home assistant and password on first install with Virtualbox. I assumed it wasn't working as I didn't see the home assistant logo that showed when you entered root. 🤦🏼 You're the only person that shows how to forward through the NAT on the VM too! Subscribed!
@HomeSight 3 жыл бұрын
Glad to help Martin!
@snowman3130 3 жыл бұрын
Great Video!
@HomeSight 3 жыл бұрын
Thanks
@jasongrembi 2 жыл бұрын
it was a really good video/tutorial up to to the point where I wanted to make HA accessable to other computers on my network the IP tables commands did not on work Ubuntu 20
@kaixenz3294 2 жыл бұрын
I hope ur video can help me to finish my Final Year Project .. pray for me sir ... Thanks u so much
@richardheijdra4350 3 жыл бұрын
Thanks slot super handy
@HomeSight 3 жыл бұрын
Thanks for watching!
@bas5tian 3 жыл бұрын
I managed to install ubuntu with VM on my old i3 laptop, grat straitforward tutorial, not nessery long. Only what didnt worked for me was port forwarding but this is problaby due to my network. I land on briged connection on my VM. Hope this channel will grow.
@HomeSight 3 жыл бұрын
Thanks John. The principal is good, the networking part is fiddly at times.
@keplerceus5654 2 жыл бұрын
Preciate you
@DominicFlynn 3 жыл бұрын
Great tutorial and iptables NAT explanation. Do you have a tutorial for using a KVM bridge instead if NAT? I see that the downside is it exposes your HA install to potential hacking but may also make it easier to integrate devices on your home network.
@HomeSight 3 жыл бұрын
Hi, I’m afraid I don’t have that as a tutorial. I remember playing with it a while ago; it’s a bit of a pain if I remember rightly?
@jklswallow 3 жыл бұрын
great vid, thank you for the info. just curious, do u have bluetooth working in ur vm to able to work with any bluetooh devices in ha?
@HomeSight 3 жыл бұрын
Hi, thanks for watching. No, I don’t use Bluetooth with my instance.
@smarter.technology.solusions Жыл бұрын
hello. the settings for forward and prerouting are available only to first restart on the system? or they keep it forever?
@jeffwiley7065 9 ай бұрын
How does the NATting work if you are trying to scan for devices on home network? Will they still be able to find it or should the iproute tables be setup differently?
@AE-zn1bg 2 жыл бұрын
Hi Thanks for this know how. I ve a problem. I ve configurated my desktop and everything works great. I have port forwarded as mentioned. Every time i reboot I loose the forward function and my virtual machine is not reacheable. Command iptables-save does not work
@iFlu Жыл бұрын
Hi Simon, thanks for the tutorial. I followed it to the t but the very last part (networking) is not working for me (I'm using a wifi dongle on my very hold laptop). As the HA VM image did change a bit (I can't use root or info network in it) I can't identify the gateway. So I tried the second to last command (the one with the network gateway name) on every of the devices listed in ifconfig without luck. I see on the HA page that using VirtualBox is not possible with wifi, do you know if a similar restriction exists with Virt-manager (as it is not mentionned) ? Do you happen to know any workaround or tutorial showing the bridge setup instead of NAT ? I must add that I can connect to the HA page on the device the VM is, but not on my other devices (tried on the iOS app and windows computer)
@alexanderjohnson7883 2 жыл бұрын
Hello, great video. I am new to Home Assistant and worked to install it last night with this method. I did run into a few issues, but got past most of them. I am now stuck in a weird boot loop, where it installs, then reboots, and installs again. Eventually it will land on a screen that just says "-Autoboot" in my vm. Any ideas or help would be greatly appreciated.
@MrCagi60 3 жыл бұрын
Hey, thx for video, but I cannot make it work. Let me start that I'm trying to do it on a Ubunto Server without GUI so for the KVM I'm using Cockpit Machines. But that part works flawless, i can start the machine no problem and I have the ip from my Virtual Network, but when I'm using the iptables command it dosen't work. I mean when i go to another PC and try to connect to the ip address it dosen't connect to anything. Do your know if there is a way to see by the command line if the iptable command worked or a fix for this?
@eckhardneumann243 5 ай бұрын
Nice video. And now I can access HA from any other PC in my network. However, the other way round doesn't work. How can this be enhanced, so that HA will find e.g. my Hue bridge or any other devices inside my network?
@stefanthorstenson 3 жыл бұрын
Thanks, mate, lifesaver! The one thing I did different was to use "Host device en*" with virtio in the network settings. That is, no virtual bridge. I'm really no expert, but it seems to put the VM on the same network as the host, and has the downside that host and VM cannot communicate on the network. Upside: no forwarding necessary, so it should be easier to make something work... Thanks again!
@HomeSight 3 жыл бұрын
Good option, yeah! That forwarding can be a pain!
@riotmode666 2 жыл бұрын
what source mode did you choose ? Bridge is default, or passtrough ?
@stefanthorstenson 2 жыл бұрын
@@riotmode666 Source mode: Bridge Device model: virtio I don't know what difference source mode does though, just happened to be default as you say...
@riotmode666 2 жыл бұрын
@@stefanthorstenson thanks for your response! did you set up a bridge ? and are you able to connect from the host as well ?
@stefanthorstenson 2 жыл бұрын
@@riotmode666 Glad to help :) I didn't do anything more to set up a bridge than just selecting bridge as source mode. I can't connect from host, so need another computer to log on to the HA web interface. Have you tried typing 'network info' in the VM command line?
@ausguy4385 2 жыл бұрын
I'm using VBox and in Windows got to auto start but I can't get it to start in mint. Any hints or ideas?
@mikecortado 2 жыл бұрын
Having some trouble with Port forwarding. I ran the commands for the tables but cannot access ha on my windows PC, Android phone, nor can I see any devices on the network. Didn't receive any errors in terminal, nevertheless I cannot connect to anything outside of the vm or Ubuntu. And tips? Edit: there's no internet connection fto the VM so I cannot install add-ons. I'm guessing 80 or 443 is being blocked?
@ThijmenCodes Жыл бұрын
Hi there, when I setup a new HA instance exactly like you have in your video and use the 'network_info' command, my 'host_internet' appears to be false. Do you have any suggestion why this might be the case?
@pixelbase7737 Жыл бұрын
Hi - I'm having the same problem. Once I applied the 2 iptables commands at the end, my host_internet becomes false. Add-On installs and other activity is now not allowed anymore. Any thoughts, Simon?
@PerryLamy 3 жыл бұрын
Simon, Why use a virtual machine to install home assistant? My network is a Unify EdgeMax and I have set up VLANs for each network such as 192.168.107.x for IOT devices. Couldn’t the network router handle traffic to the home assistant and protect it behind the firewall? VM seems like an extra layer. Thank you for the great video and explanation. I look forward to your help with HA.
@HomeSight 3 жыл бұрын
Hi Perry, I’d use a virtual machine as it’s supported by Home assistant rather than installing core. I agree in using VLANS for network segregation, but most people wouldn’t have the knowledge or equipment to do so. Using VLANS doesn’t replace the need for hosting HA on a device, be it physical like the Pi or virtual.
@kiransubramanianpallayil5861 Жыл бұрын
Hi Simon, I am new to home assistant and ubuntu, however, when I was booting up home assistant, it didn't give me an option to login as root and hence your terminal command didn't work. Is there any fix for this problem?
@zenrinzai7647 Жыл бұрын
Everything worked for setup. The forwarding doesn't seem to work though. I can't access the virtual machine from anything else on my network. Could you please help me?
@xanner82 3 жыл бұрын
I have problem whit the virtual manager. It can not connect. I only say that I need to see if a file is running
@AndreKochDre 2 жыл бұрын
Ok so I get the IP from network info but it shows as unknown in NIC. Also the IP:8123 doesnt display in my browser
@sjcsystems Жыл бұрын
Few issues in this video...ifconfig needed to be installed. Starting the KVM Manager the first time, said no connections available. Access from outside my M93P by another Windows machine? Nope. Checked it twice. Doesn't work.
@sailava88 2 жыл бұрын
Hi could any one help my right click extract function not working may I know how to I activate or install
@MrTutubo66 3 ай бұрын
Many thanks very helpful Successful installation ( Installed on Ubuntu 22.04 on KVM ) but I run and try to add add-ons it gives me this error ( AddonManager.install' blocked from execution, no host internet connection )
@ericxls93 2 жыл бұрын
is it possible to install HASSIO on a VM hosted in azure?
@JensPeterSrensen 2 жыл бұрын
Now another issue, the installer after begin installation, stops and are showing the Shell Can you please give a hint?
@jproveta 3 жыл бұрын
Hi, I use Promox VM on a mini-PC and the HA on VM.
@HomeSight 3 жыл бұрын
A good option!
@kellanstevens 3 жыл бұрын
I’ve done this before, but when I reset my Ubuntu server awhile back I struggled to set it up again, although I did use docker. I’m currently using one of my dad’s old All in One Acer PC’s with a cracked screen so it’s just being used with Ubuntu server to run all my HA stuff, Homebridge, Plex, NTP server and some other stuff. I’ve got this cool little think centre PC which is currently locked down by an Amazon ChromeOS bios, hopefully I’ll be able to reflash the bios chip after my Finals in December, I’ll use that to run my server stuff 😋. My dad doesn’t want me to have the Acer PC behind the TV (so I can use Ethernet) but once I have that think centre pc up and running I’ll be able to use Ethernet and sim definitely use this video to setup HA on a VM
@HomeSight 3 жыл бұрын
Hi Kellan! Great stuff, thanks for watching.
@craigtomanelli3964 5 ай бұрын
Great instructions, I was able to work through this and have HA running in a VM on my Ubunto machine. But it does not appear to be the supervised version. I am new to HA and had it running in docker, but only the core version. I do not see the expected supervisor to click in the left column. I need to get some add ons that are only available through the supervisor.
@HomeSight 5 ай бұрын
Hi, supervised version is not available to be virtually hosted.
@craigtomanelli3964 5 ай бұрын
@@HomeSight Hmmm, thanks. that is not how I interpreted the documentation. I was excited when I found your video that indicates supervised in the description. If it really is not available you may want to update that description. Either way I learned a lot going through the exercise. So time not wasted.
@David-hh8uw 2 жыл бұрын
Great video! I’ve gone through the process you showed but I’m now having issues with the supervisor. When I try to install add ons in the add-on store I get an error pop up ‘AddonManager.install’ blocked from execution, no host internet connection. If I go to the terminal in the VM and type ‘ha network info’ I see that that there is no host internet, host_internet: false. Does anyone have any suggestions? I’m running hassos 6.6 if that helps. I haven’t found any useful information in the forums.
@L1van 2 жыл бұрын
Hi David I facing exactly the same issue with latest version of HA since 2 days, without any solution. Do you find any solution to solve this problem? @Home Sight can you please help ?
@HomeSight 2 жыл бұрын
Hi, I haven’t seen this on my installation(s) do you definitely have a default gateway and a DNS server set?
@David-hh8uw 2 жыл бұрын
Hi @Losev Ivan, no I couldn't get it to work. My DNS server and default gateway were definitely set correctly though. Looking online it seems that others have had the same issue with this virtual machine, but had no luck resolving it. I resorted to using virtualbox instead of virtual manager. That seemed to work for me.
@philipmikkelsen7993 2 жыл бұрын
Hi Simon, great tutorial , as always!! I am aiming towards converting, my house into a smart home using Homeassistant, I got a Pi 4, 8GB, model B. and a Conbee II stick, I was able to set it up with zigbee2mqtt following your epic tutorial, (for the conbee II i had to watch a number of other channels tutorials as well) but it does work now!. i am running HA directly on the PI and did that before discovering your channel. now for the actual question: what pros and cons are there, if i move over to ubuntu like in this video? since i am not a programmer nor an advanced user in this world yet, i want to feel secure in choosing the right path at the beginning in terms of network security, connectivity and speed/delay between the ZigBee devices. i know there may not be a short answer, but if you could just point me in a direction..
@HomeSight 2 жыл бұрын
Short answer is stick with Pi if I’m honest, with the Pi4 it’s powerful enough to give you many years of HA fun! Just make sure you keep doing your backups because your SD card will fail at some point…
@philipmikkelsen7993 2 жыл бұрын
@@HomeSight Thanks!
@michaelmac8 3 жыл бұрын
Thanks for the video. My installation cannot discover any devices on my network however...no Google Cast for example. How do I fix that?
@HomeSight 3 жыл бұрын
That is one limitation of this method, auto discovery is more difficult. You will need to forward the necessary ports through the iptables command, like we did in the video for 8123. I’m afraid I don’t use google cast so I’m not sure what ports to forward. According to google you will need TCP 8008 and 8009; and. UDP 32768 through to 61000.
@michaelmac8 3 жыл бұрын
@@HomeSight thanks for the reply. Seems like maybe this method isn't for me. I've tried Proxmox but couldn't seem to get it to work either. Probably just going back to the Rpi for now.
@DanDanroonie 2 жыл бұрын
Google wifi router doesn't permit multiple IP ranges. Accessing HA on the linux box works, But port forwarding is failing since KVM IP addresses are out of range, Any known workarounds?
@HomeSight 2 жыл бұрын
Sorry, I don't know the Google Router. You should be able to forward to the host, and map the ports through.
@robertinogg Жыл бұрын
Why do we need VM?
@4sayken 3 жыл бұрын
Is it just me or is the opening song the same at one of drzzzs animation songs?
@HomeSight 3 жыл бұрын
Not sure?!
@riotmode666 2 жыл бұрын
i had problems after virtual manager install (unable to connect to libvirtd). i got not connected QEMU/KVM in the Virt.Manager. A "sudo virt-manager" in Terminal helped me here. And when installing HA i got "Waiting for Home Assistant CLI , jump into Emergency Console.... and now i'm stuck here... help would be highly appreciated
@riotmode666 2 жыл бұрын
ok this helped in the console, but the time is correct in ubuntu. systemctl daemon-reload systemctl restart systemd-timesyncd.service systemctl status systemd-timesyncd.service exit = Now its running , but i can only access via Windows , lol
@GeirForbord 2 жыл бұрын
@@riotmode666 The problem was solved when i entered BIOS and changed to uefi and allowed virt-machine
3 жыл бұрын
Hello guys... Very good video, very well explained. The question arises for me, when I restart the Virtual Machine, I have to repeat "iptables -I FORWARD" and "PREROUTING" and again "iptables-save" or is there any command that would actually save Permanent? Otherwise I like everything very much... Thanks for a very instructive video.
@HomeSight 3 жыл бұрын
Hi Robert, I don't actually have this running at the moment to be able to try, but you can take a look here: www.thomas-krenn.com/en/wiki/Saving_Iptables_Firewall_Rules_Permanently
@HomeSight 3 жыл бұрын
The other thing you could do, is add it as a .sh script and run it in via Cron on boot up?
@scrivuk 3 жыл бұрын
I have the same issue! Looking to solve now.
3 жыл бұрын
@@scrivuk hi, I apologize for my late reply... I wrote one command after the end off "sudo iptables-save" the following command: >> "sudo netfilter-persistent save". then you can check if the record is in: sudo nano /etc/iptables/rules.v4 it helped me...
@mariankoniuszkousa 3 жыл бұрын
Why unsupported Ubuntu instead of supported Debian? Is there any particular reason? Just asking as new HA user running HA and Debian VM.BTW Great source of informations. Thank you.
@HomeSight 3 жыл бұрын
Hi, It's not that it's unsupported, because it's hosted in the virtual environment.
@mariankoniuszkousa 3 жыл бұрын
@@HomeSight Thank You for your response, I got it that it is VM but if you go to the supervisor tab it says "You are running an unsupported installation" and this is where my question as noob comes from. I originally installed Ubuntu VM but because it is going to be my everyday HA instance I wanted it to be as "legit" as possible. After installing Debian VM the warning is gone and everything works fine so why most people choose Ubuntu not Debian? I don't want to make a mistake at the very beginning if there is any good reasoning behind it.
@HomeSight 3 жыл бұрын
Installing it within KVM was supported when I last looked... I’ll have to check that one!
@fly-fpv Жыл бұрын
Im on iobroker, but Home assistant looks so much better 🙈 should I switch?
@HomeSight Жыл бұрын
Yes, yes and yes! Maybe spin up a raspberry pi and chuck it on there to take a look!
@pfr3695 2 жыл бұрын
my Hue lamps dont show up, why?
@jefftatum2503 3 жыл бұрын
Thanks for video walk through. All working but HA is not seeing any devices. Have a version running under Docker on Synology that sees 20+ devices. Do you have any idea why I'm not seeing my devices? Cheers....
@HomeSight 3 жыл бұрын
Doing it this way is a bit manual, you're unlikely to do any auto-discovery since they will be on a different network. Have you added your devices manually?
@jefftatum2503 3 жыл бұрын
@@HomeSight I might be too much of a novice to do that. I just tried adding a new integration - Sonos - and it tells me no devices found. I have 12 Integrations on the Docker/Synology version. Similar TP Link Kasa same., no devices. Am I doing something simple wrong?
@HomeSight 3 жыл бұрын
Running it in this way is kind of advanced, same as running in docker. I would look at getting a pi and running it on that if I were just starting out.
@jefftatum2503 3 жыл бұрын
@@HomeSight Thanks for help. I'm running unsupported on 418play but all working. Just set old laptop up with Ubuntu and VM as VM under Windows was hit and miss. I find my Pis a bit fiddly, hence thought Ubuntu /VM was way to go. Back to drawing board for me. 😊 I might give up. Thanks for help.
@jefftatum2503 3 жыл бұрын
@@HomeSight I persevered and have managed to manually setup most of my system, plus some extra integrations. I wasn't going to let it beat me!! Thanks again for the great video and taking time to reply.
@jeffwiley7065 9 ай бұрын
Just an FYI. I had to do a reboot after Virtd install in order for it to connect properly.
@jeffwiley7065 9 ай бұрын
Also, NAT commands didn't work for me so for now I can only view webpage via local machine.
@freibuis 2 жыл бұрын
your going to have a bad day using KVM in nat mode. use a bridged network instead.. Some devices will not work if they are not on the same network segment or translating through Nat ..
@scotttipton7893 3 жыл бұрын
Fantastic video! I was wondering how to do this. I'm having one issue though. My tp-link light switches aren't being discovered. Is there something I need to do to make those available to the HassOS VM?
@HomeSight 3 жыл бұрын
Hmm, you shouldn’t need to, have you definitely got the switch in pairing mode?
@scotttipton7893 3 жыл бұрын
@@HomeSight The switch is already connected to my WiFi network, but I can’t access it on my HA system in Ubuntu VM. The one on my raspberry pi where I loaded HASSOS directly works just fine.
@HomeSight 3 жыл бұрын
Ah right, I’m with you now. I don’t use the TPlink switches if I’m honest. How do they integrate? Is there an integration? Using this method is a little more manual than having it on a Pi (for instance) on the same network.
@scotttipton7893 3 жыл бұрын
@@HomeSight Yea, there’s an integration that autodiscovers and can’t find them on my network. For the reason, I was wondering if it was just searching the VM network only and not the rest of my system. Some of my other integrations like Speedtest also don’t seem to work.
@scotttipton7893 3 жыл бұрын
@@HomeSight Also, the switches show up if I set the network to eno bridge instead of virtual NAT, but for some reason if I do that, it takes forever for my HA system to load (20 mins) and it is really slow.
@Acemarcelo12 2 жыл бұрын
how is it not working for me? i cant access from another PC still. and why did the IP change to 192.168.1.142?
@HomeSight 2 жыл бұрын
Have you got it on the same network range that you use?
@Acemarcelo12 2 жыл бұрын
@@HomeSight yes, one pc for linux and another windows pc. They are both on the same Hotspot network.
@phillipcastillo8111 2 жыл бұрын
I also got the same problem, any ideas?
@joeslife520 2 жыл бұрын
I had the same problem before. Just follow all the commands in the video. But when you use another PC, you have to enter the IP address of your ubuntu machine, not the virtual machine. You can find it using "IP addr show" in the Ubuntu terminal, and the address right next to "it" will be the IP address to enter in your other computers. Feels like the previous part of the video is kind of misleading, and the explanation at the end makes me understand everything.
@herissonlaurentoz 2 жыл бұрын
@@joeslife520 you saved me. Great video, but just this little bit of information at the end would have saved me hours, this Joe's life saved mine ;)
@Asinthe Жыл бұрын
wow supereb
@kapilsharmay9924 Жыл бұрын
I am not getting the IP address, what could be the issue?
@HomeSight Жыл бұрын
Are you cabled in? I would try and plug another device in (maybe a laptop?) and make sure that gets an IP address.
@kapilsharmay9924 Жыл бұрын
@@HomeSight I am using a wifi network.
@kapilsharmay9924 Жыл бұрын
Stuck in it from yesterday
@mertronsken Жыл бұрын
Everything works by me until the port forwarding part. I double checked the commands but I can't connect to HA from outside
@JayK108 2 жыл бұрын
[WARN] Home Assitant not starting! jump into emergency console..
@JayK108 2 жыл бұрын
solved. just had to wait and it worked somehow. now wiating for the installation screen 20 mins wait time..
@HomeSight 2 жыл бұрын
Glad you got it working.
@Thegreekgeekss 26 күн бұрын
You waited with the [WARN] showing on screen?
@CCoburn3 Жыл бұрын
These instructions do not work as of 1 JAN 23.
@MobileDecay 2 жыл бұрын
It's odd that you start this by showing how to install the os. Just imagine every windows tutorial started off by telling you how to install windows. Lol. The Linux community loves to make everything look as complicated as possible when it really isn't. 🤣
@HomeSight 2 жыл бұрын
It’s a very good point… but I guess I was trying to do it for someone who had never done it at all?!
@DjMrMors Жыл бұрын
@@HomeSight actually I agree cause I am not that familiar with Ubuntu. I want to ask this HA it has addons? Or it’s like core edition.
Home Sight
Рет қаралды 73 М.
Everything Smart Home
Рет қаралды 123 М.
virtualize everything
Рет қаралды 10 М.