How to sharpen a curved scissor

No video

How to sharpen a curved scissor - Jende Industries

Рет қаралды 18,414

Күн бұрын

Sharpening curved scissors is not for the faint of heart! They can be confusing, and require some extra techniques and tools to effectively sharpen them. I use a 1" wide stone that is contoured/rounded on one side to match the curved bevel and inside ride line, and the flat side of that stone is used to do the opposite ride line and bevel.
More sharpening videos: • Different shears and s...
Jende Industries is an international company that specializes in sharpening and sharpening gear. We are the makers of Jende Reed knives, Jende Nanocloth Strops, Jende Diamond Emulsions and Jende Leather Knife Rolls. We are also the distributor of Maestro Wu Bombshell Steel Knives from Kinmen and we custom cut stones for guided sharpening systems such as the Jende JIGS for Knives, Hapstone, Edge Pro, TSProf, KME sharpener, and Wicked Edge. So if you are a musician, chef, outdoorsman, or sharpener of any level, Jende has something for you! Check out, like, and subscribe to our official Jende Industries youtube channel to see more descriptions and performances of all our sharpening products and services.

Пікірлер: 38

@PA30000 2 жыл бұрын

I would have had to try and find a very specific specialist for this, instead I find someone who has the same knowledge in a different field that applies. Its crazy the value of communication! Thanks for this video, its starting me off in a very productive skill!

@PA30000 2 жыл бұрын

9:33 "It looks different, make it look good again" If you wrote a novel with this at the start :)

@JendeIndustries 2 жыл бұрын

The crazy beauty of sharpening is that it is actually quite segmented between the different types of blades. Kitchen, fishing, hunting, shaving, and scissor sharpeners all follow the same rules, but have specialized procedures to ensure the rules get followed! I try to tiptoe through all of these genres and cross pollenate where ever I can. Thanks for watching!

@leaheiden2436 2 жыл бұрын

Thank you so much for this! I've been trying to learn how to sharpen my curved scissors and this was incredibly easy to understand and follow!

@JendeIndustries 2 жыл бұрын

Glad it was helpful!

@rachelmascena8572 2 жыл бұрын

As a groomer I appreciate your thoughtfulness!

@JendeIndustries 2 жыл бұрын

Thank you for watching! I'm glad you found it helpful!

@denisewildfortune4058 4 жыл бұрын

That was awesome! Though I don't intend to try this difficult challenge, I've added your techniques to my knowledge base.

@JendeIndustries 4 жыл бұрын

Ideally you would use a jig for this kind of thing, but the techniques are exactly the same, just not freehanded.

@dfailsthemost 2 жыл бұрын

I was looking for exactly this. Thank you.

@JendeIndustries 2 жыл бұрын

Thank you! Glad you found it helpful!

@MK-jn9uu 3 ай бұрын

I think the concave part of the shear is supposed to use the convex part of sharpener. To prevent widening the ride line?

@JendeIndustries 3 ай бұрын

Thanks for watching! In general, the concave aspect of the ride line needs to be sharpened flatly. Over an extended period of time the contact points between the concave/hollow will widen and ultimately go flat, then convex from abrasion (which is why many people avoid the ride line all together). You are not trying to recreate the hollow grind on the ride line, unless you are actually trying to regrind them to hollow - which is far more advanced than even this. 👍

@garyhenderson6504 4 жыл бұрын

Well done. THi is a very useful video.

@JendeIndustries 4 жыл бұрын

Thank you! These are not the easiest kind to sharpen.

@Mrplacedcookie 4 жыл бұрын

Thank you

@JendeIndustries 4 жыл бұрын

Thanks for watching!

@heni63 2 жыл бұрын

Thank you man

@JendeIndustries 2 жыл бұрын

You're welcome!

@dfailsthemost 2 жыл бұрын

Man, I told my buddy I only sharpened knives, and he was like "come on, how hard can it be!?" Then I saw that they were radiused and knew I was doomed. Just going to strop them with diamond paper and give them back haha Honestly, I'm not even good at sharpening knives. I just do it to relax. Never actually tried to improve my technique.

@JendeIndustries 2 жыл бұрын

The key to sharpening is to always have fun. Many people enjoy the Zen of it, but sometimes new or different blades cause frustration because it ruins the mood. However, if you persevere, then it becomes a fun challenge once you get over the learning curve of a new type of blade. It took me about 6-8 months to FINALLY understand honing straight razors - at least enough to get a usable result! It was seriously frustrating and all consuming, but once everything came together with the theory, practice and technique, honing razors is now something that is relaxing.

@dfailsthemost 2 жыл бұрын

So, in order to keep from touching the ride line, would you just slightly come in a higher angle?

@JendeIndustries 2 жыл бұрын

I actively go for the ride line :). However, if the blades don't separate, then I would make one, maybe 2 very light passes flat on the ride line in order to remove some of that burr buildup. That avoids crunching the edge when you close them up.

@ritavorobjova 2 жыл бұрын

Lovely technique and finish! What is the name of the curved edge stone you are using? And what model is the buffer machine?

@JendeIndustries 2 жыл бұрын

The stone I used is the Naniwa 1K Chocolate bar, it's homemade. I cut it from a full size stone. The buffer is a 1hp no name bought locally.

@marianoalfredoespinozacond8447 2 жыл бұрын

Hola amigo buen video donde puedo encontrar la priedra curva y su pudiera enviar el enlase gracias

@timchapman5553 5 ай бұрын

Which stones do you use

@jiro209 10 ай бұрын

May I ask where can I buy the sharpening stone used?

@JendeIndustries 10 ай бұрын

Thanks for watching! You can find the full size sharpening stone almost everywhere. If you are looking for the sticks, you can contact us from our website - www.jendeindustries.com

@tannerclark1159 4 жыл бұрын

How sharp is your shapes knife ? I’m part of the knife sharpening Facebook group that your in ?

@aquaticnstuff7666 Жыл бұрын

is there no rideline on that blade

@JendeIndustries Жыл бұрын

I'm of the school of thought on scissors that sharpens both sides of a blade. Many times a ride line is corrupted, or there is just a big honking burr to remove. There was a hollowness to the inside of the blades though.