@oystercatcher943 Жыл бұрын
Just what I needed. The manual is now ONLY online and even then didn’t have any fitting instructions! Thanks
@SzynszyL01 28 күн бұрын
Yes. Online like youtube video 🤣
@thomascray 2 күн бұрын
Fantastic instruction. Didn't miss a thing, and didn't waste our time with extra. Great job!
@unalteredcapture 7 ай бұрын
Perfect video, wish KZfaq was more like this! No BS, clear and instructive - Well done!
@mlb6d9 9 ай бұрын
Nicely done, thorough without all the extra Jibber-jabber....Thanks! I constructed my first replacement front brake line yesterday with one of those barb presses. Handy to have and cheap!
@marklangley217 8 ай бұрын
This was so helpful. Just bought a set of SLX brakes but the website didn't say they weren't fully assembled. I've done bleeds before, but never installed hoses before, so hopefully your video will help me to minimize my screw-ups when installing! Thank you!
@AlexDryga 21 күн бұрын
Thank you this was the most simple tutorial that I could find
@richyriches Жыл бұрын
I've watched tons of how to vids on KZfaq, on dozens of topics. That was as good as I've seen. Great job, keep it up.
@TheBikeSauce Жыл бұрын
🙏🙏🙏 thx!
@kazymerchyk Жыл бұрын
This is the best video I’ve seen in this by far man! Thank you
@adwwdawad 2 ай бұрын
Very good thanks for saving me a trip to the workshop
@hardmtnbiker Жыл бұрын
One of the best “easy to follow” new brake installation videos. That dedicated brake line cutting tool and barb tool is really nice!
@tylerseboe Ай бұрын
4:15 Thanks for that…I swore it opened all the way but couldn’t figure it out.
@danielsanculi1344 Жыл бұрын
One of the best videos i've seen to show how this is done correctly.
@kuri8015 Жыл бұрын
That was succinct. Good job!
@kpflugshaupt Жыл бұрын
Love how easy Shimano make this stuff! I really think I can do a full oil change in about the same time it took me to swap a brake cable. Now if I‘d only had this nice video back when I started… 😉
@Savrotir Жыл бұрын
Very detailed but at the same time easy to follow video. You have a thing for educational videos dude.
@TheBikeSauce Жыл бұрын
😆 thx. My day job spilling over into the channel..
@celynjones4958 Жыл бұрын
Did this for the first time last year. Easy once you know how. Hope the SLX are worth it. I got older XT, soo nice to have reach adjustment. Cheers
@TheBikeSauce Жыл бұрын
Nice! These have reach adjustment as well. Only difference is XT has a free stroke adjust as well, but I’ve heard it doesn’t work too well, I opted to try SLX
@superyamagucci 9 ай бұрын
@@TheBikeSauce Engineering-wise, the master cylinders are identical to XT. Take out the blank cap with a pair of circlip pliers and put a screw in there. I put gold ones in mine because it looks awesome, and if you don't like it, you're wrong. Can't remember the thread size sorry. Don't know how well they work, I just like how they look.
@TheBikeSauce 9 ай бұрын
@superyamagucci that would be an awesome diy video
@matthewmoodie6553 7 ай бұрын
Thanks so much man, appreciate the procedural walk-through and respect your attention to detail!
@Alistair_Spence Жыл бұрын
Good video. Nice to get a refresher on these kinds of maintenance tasks.
@WalkerBikes Жыл бұрын
Was looking for a tutorial, what a great surprise to see your channel!
@yycmtbr5087 9 күн бұрын
Great video. Always wondered what the crow's foot was for.
@jamesthomson5370 Ай бұрын
Excellent tutorial.Thanks a lot.
@mjojrjr6231 Жыл бұрын
Dude, this is very detailed and just what I needed to know. Thank you so much.
@ivan_di_dio97 Жыл бұрын
For the bleed is better remove brake pads and push the piston back , insert che the bleed block to lock the pistons. Connect the Shimano funnel with oil and press lever . When you don't see air bubble , remove the funnel with oil , remove the bleed block , reinstall the brake pads and done.
@irfuel 6 ай бұрын
Yeah the "bleeding" he does isn't bleeding at all actually ....
@AlexGirodo Жыл бұрын
very complete and easy to understand HOW TO, thank you
@speedikat6822 Жыл бұрын
Great job! I could've used this info a year ago. I ended up giving the install to my LBS. But now I can take a Crack at doing it myself.
@TheBikeSauce Жыл бұрын
Not too bad!
@NeuroticNexus 8 ай бұрын
Wondering why you have to take out the olive? Is this step in the manual? Thanks for the decent, easy to follow video. I have to finish the same brakes the next days. Hope it will go as smoothly as in your video 😊
@johnmurray9746 Жыл бұрын
Great video, super clear instructions hitting every important point. Thanks!
@TheSasquatchNation Жыл бұрын
This was a huge help. Thanks for making the vid 🤟🤙
@AskDrKing Жыл бұрын
Great, straight forward video!
@itscaptainadobo Жыл бұрын
Great vid! Just what I needed, have a friend that needs this work done and you made it look easy peezy!
@TheBikeSauce Жыл бұрын
Right on, Bob!
@pascalvidal731 Жыл бұрын
Très bien expliqué, compréhensible même en anglais 👍
@rafort09 9 ай бұрын
Great. Explained everything. Thanks.
@trevorsowers2202 Жыл бұрын
Nice job on this! Well done video
@ttuurrookk1 11 ай бұрын
Ty gonna use ur video to install Shimano Saints
@jurgenrossaert8437 8 ай бұрын
Perfect! Thanks
@danielhughes8103 Жыл бұрын
Excellent video very informative!
@Bikeparktrails24 8 ай бұрын
Perfect, thank you!
@EveryTongue 5 ай бұрын
Great attention to detail! You presented this very well.
@AlexNijv 9 ай бұрын
thanx!
@edvardfranke 5 ай бұрын
Thx
@lukasjerad707 Жыл бұрын
Big thank you
@mikemoccia4965 Жыл бұрын
Thank you!!
@petrzibrid239 Жыл бұрын
Díky!
@TheBikeSauce Жыл бұрын
Thank you!!
@LucasLWJ Жыл бұрын
How about better way to bleed tektro 4 pistons using by Siskiu T8... Mine very spongy on the lever... Thanks for your reply soon😊
@applemansanas3246 9 ай бұрын
i hope someone can notice but the banjo bolt in the caliper. can you reposition it to other side?
@cebruthius 5 ай бұрын
The 2mm thickness of the SRAM rotor works with the Shimano caliper?
@thedownunderverse Жыл бұрын
Dude, I recently tried contacting you via ur site RE: the FS 2.0 blank cartridge… are you gonna sell them?
@qfina 3 ай бұрын
Does the cable come with oil in it too then?
@damienmitchell3080 6 ай бұрын
Why the Hell is the seal bursting on the lever when I brake a bit harder??
@6.0burnsey Жыл бұрын
Im new to mountain biking but i just picked up a bike that has these on it. What are the little thumbscrews on the lever for? Thanks and hopefully thats not a dumb question 😂
@TheBikeSauce Жыл бұрын
Happy new bike day! They set the lever position in or out (it’s called ‘reach adjustment’). There’s no right or wrong position; set it where it feels comfortable and where the lever isn’t pulling all the way to the handlebars
@6.0burnsey Жыл бұрын
@@TheBikeSauce ok thanks for responding! Just wanted to make sure they weren’t for anything else. 👍
@AFDL17 Жыл бұрын
You mentioned being able to use the preinstalled barb on the new hose if you don't want to shorten the line. I noticed the barb has a film over the end to keep the fluid in. Does this film need to be removed first?
@TheBikeSauce Жыл бұрын
Oh I wasn’t aware it had a film on it. It would need to be removed first
@AFDL17 Жыл бұрын
@@TheBikeSauce I figured. That’s what I did and it seems to have worked well. Thanks for your videos, by the way. Great stuff!
@kmdem Жыл бұрын
Hi did you just scratch the film off the barb? Shimano web site did not mention it. Thanks.
@AFDL17 Жыл бұрын
@@kmdem Yes, I just used my fingernail to make sure the barb didn’t get nicked. The film was well attached so it took some work but it came off cleanly.
@kmdem Жыл бұрын
Thank you so much.
@peterpage9017 Жыл бұрын
Why not use the same brake hoses?
@davidamora2565 Жыл бұрын
Why’d you switch from srsm to shimano? I heard sram has better modulation
@TheBikeSauce Жыл бұрын
I personally don’t like messing with dot fluid, and my sram levers started getting stuck (known issue on sram levers).
@davidamora2565 Жыл бұрын
@@TheBikeSauceeven on sram code r’s?
@munakim1 Жыл бұрын
Would this break system work on a GT aggressor pro?
@TheBikeSauce Жыл бұрын
Sure would
@outbackwack368 Жыл бұрын
Great, detailed explanation, thanks! The "olive" is called a ferrule. I turn my bike upside down and pump the brakes too. This is why I take mine to the bike shop... so I don't have to buy $100 in tools to do a $20 job 🙂
@TheBikeSauce Жыл бұрын
Haha ferrule is the cap that goes on the end of brake and shifter housing.
@tamasvarga67 Жыл бұрын
Why would you need to buy $100 tools to do this job? The only thing really necessary is the $5 plastic funnel and some mineral brake fluid…
@mountainbikingwithalan Жыл бұрын
Yeww
@AwesomeAngryBiker 27 күн бұрын
totally wrong dude, You don't need to remove the bolt or olive from the lever, they are left in there intentionally and the cable just sits directly in (after cutting). The other error is the cable is not prefitted with a barb. The thing that's in the cable is a plug simply to stop the mineral oil leaking and this must be removed before attaching to the lever. On the cable just below the sealing plug is a small marking which indicates the minimum amount of cable that MUST BE REMOVED before inserting the supplied barb
@TheBikeSauce 27 күн бұрын
😆 removing the olive and nut is a personal preference to make sure the barbed hose sits fully in the lever. Neither correct nor incorrect. Of course the cap on the uncut hose isn’t a barb; we ended up shortening the hose anyway. Why are you an angry biker? Bikes are supposed to be fun 😀
@iamcyberpunk68 5 ай бұрын
for a G I you speak ok english dude
Pinkbike
Рет қаралды 252 М.
Syd Fixes Bikes
Рет қаралды 892 М.