No video
HOW TO SLIDE YOUR TANDEMS AND BRIDGE LAW
Рет қаралды 3,048
Күн бұрын#trucking #cdl #tractortrailer
@noir-resurection4066 Жыл бұрын
4in spacing = 250 a hole 6in spacing = 400 a hole 5th wheel slide =500 a hole If your trailer has no kingpin length marks, grab a measureing tape and measure 10ft from rear of trailer, that will give you the California 40 and 9ft is the 41. Also always scale with at least half a tank or greater. If you need to fill up. Diesel weights about 8lb a gallon. Keep in mind those numbers as you will get a ticked if your caught at a scale.
@cru5124 Жыл бұрын
Wow awesome tips! Good to know. Thanks. Love your videos!
@danstafford5977 Жыл бұрын
That's what you're learning in CDL School... also the California Kingpin setting your tandems need to be 40 ft from the Kingpin!
@tonyringtail Жыл бұрын
I was taught that each tandem hole was only 200 lbs... what is correct?
@sille2160 Жыл бұрын
It depends on the company and their trailers honestly my company each hole is 250
@thisotrlife7400 Жыл бұрын
Never heard of 200's. Typically dry van and refers either have 250 or 500lb a hole trailers. Some trucks have a psi gauge for the drive axel. While not 100% accurate it gets you close to legal at the shipper. Always use a cat scale to double check.
@reggaeriderr Жыл бұрын
Good information. But he needs a mic on him 2 hear him clearer
@MoonKeyDLaughy Жыл бұрын
I didn’t understand 🥴
TruckScience
Рет қаралды 6 М.
Cornell Collins
Рет қаралды 20 М.