How to: Soundboks LED Walkthrough

Рет қаралды 14,316

4 жыл бұрын

Upgrading Soundboks with addressable LED strip and Arduino to control it via Bluetooth.
New Wi-Fi LED control module: • LedBox V2 | StanleyPro...
Music: ST4N - Night Walk • Video

Пікірлер: 24

@jannikstrubin3232 4 жыл бұрын

Thanks dude definitely gonna try this!

@viraltype3503 4 жыл бұрын

Nice video bra bra... Big luv!

@dr.sergej1026 3 жыл бұрын

And how to connect it to the battery??

@Jonas-jm3kp 4 жыл бұрын

Can you make a video how to capelin it together?

@jesperhansen5373 4 жыл бұрын

Looks great! Is there any chance that you have the standard set commands for the Bluegiga WT32i that comes with the Soundboks 1 or 2? I was messing around with mine and was stupid enough to not have a backup before doing so...

@StanleyProjects 4 жыл бұрын

Thanks! No, unfortunatelly I don't. I was just adding an additional module, rather than messing with the existing one.

@HotNHorny 4 жыл бұрын

This is awesome. If only I knew half of how this stuff works 😂

@ooerty 4 жыл бұрын

Really want a suggestion on how to do this on my sb3

@Frederik_Kreuz 3 жыл бұрын

Same

@soriu_val 3 жыл бұрын

Same

@Bob-pl8oy 3 жыл бұрын

If not too late, buy led strip with a transformator, mine I control with an app, removed the usb power supply and wired it to x4 AA batteries, thats 6 volts, its all covered up and almost invisible. Glue/tape the led to the grill, and it will sit perfectly

@pfefferminzbonbonverkaufer8836 3 жыл бұрын

Basically the same way, the sb3 is pretty similar

@jonassrensen646 3 жыл бұрын

Can you do a fill video

@aleksanderperl 3 жыл бұрын

Hey man! thanks for this movie, its looks awesome! Im courious if it is possible to connect SP107e (5V) throught a USB cabel (5V) to average powerbank 20000mAh as a power supply. You think it is possible to work? Greetings from Austria!

@StanleyProjects 3 жыл бұрын

Hey! Glad to hear you liked it. I don't see a reason why it shouldn't work. However, depending on the length of your strip, the current consumption might be higher than what your powerbank can provide. This might result in an unexpected behavior or even a damaged powerbank, so if you want to be safe, always calculate the worst case scenario power requirement for the strip and check whether your power source can handle it.

@aleksanderperl 3 жыл бұрын

@@StanleyProjects you right! Thanks for an answer 😉

@pfefferminzbonbonverkaufer8836 3 жыл бұрын

@@aleksanderperl Geh auch heute an das Projekt hab mir schon alles bestellt, wenn du eine Powerbank von beispielsweise Anker nimmst, welche selbst erkennt wieviel Strom benötigt wird sollte es kein Problem sein. Ist es richtig das ich wenn ich den SP107e habe garkeine arduino teile brauche?

@ProxyProof 4 жыл бұрын

If you want the animation to react to the music wouldn't it be simpler to just hook up the Arduino to the wire powering the speaker itself and listen in on the current that drives the speaker coil? Wouldn't that be simpler and less noisy than listening to the actual sounds with a microphone?

@StanleyProjects 4 жыл бұрын

Good thinking, but the output of the amplifier driving the speaker can have pretty large voltage variation. However, you could listen in on the audio signal that is fed to the amplifier, and that would most likely be the ideal solution.

@178skaeboard 3 жыл бұрын

You will burn your arduino

@fitzroyshakes1850 2 жыл бұрын

There is nothing wrong with the Soundboks design the design is perfect but to get the quality sound to get a deep bass you need to make it with 2,15 inch speak and a bigger battery and more power We want one box to do the job of two, the design of the box should not be change it just need to be bigger you should not need to buy five box when you can use 2,15 inch bigger speaker in one box As one of Soundboks best customer my opinion should be valued soundboks is going around in circles you have made all the box the same size and then you call that new to be new you have to step out of your comfort zone and be innovative I love the design but I need you Soundboks to go bigger if you say that you're for the out door party's then that defeat the hold object

@pfefferminzbonbonverkaufer8836 3 жыл бұрын

Hey man, why is the Website of the code not available anymore?

@StanleyProjects 3 жыл бұрын

Hey. I've just released a sound-reactive Wi-Fi module that can be used to drive all programmable LED strips. Be sure to check it out since it is a more convenient replacement for this. kzfaq.info/get/bejne/esh3ecKDlbmUdaM.html

@StanleyProjects 3 жыл бұрын

I've just posted a new video about my new module that can be used as a sound-reactive LED controller. kzfaq.info/get/bejne/etKqmtmgprabh30.html