How to Spray Paint a Tumbler Without Getting Drips

Рет қаралды 23,987

Күн бұрын

Hi lovelies, in this video, I am continuing with the basics of making a tumbler and will show you how to spray paint a stainless steel tumbler without getting any paint drips.
If you enjoyed this video, please like the video, subscribe to my channel and hit the notification bell to be alerted to new videos I post. It is completely free and really helps support the channel.
I also wanted to remind you of my Facebook Group, Lovely Creations. In the group you will be notified when I release new listings, new tutorials, when I have sales, and will have access to a discount code for my Etsy shop which is exclusive to group members.
Lovely Creations - A Group By Lovely Lou Lou Designs
/ lovelylouloudesigns
Did you like this tutorial? If so, you can now buy me a coffee to help support my channel so I can continue producing content. Donations are one-time (no recurring fees), flexible and entirely optional but greatly appreciated. If you would like to buy me a coffee, you can do so here:
www.buymeacoffee.com/lovelyloulou

Пікірлер: 74

@emem009 3 жыл бұрын

Who would believe this tutorial was needed - I learned it was!

@LovelyLouLouDesigns 3 жыл бұрын

Thank you 🖤

@lovehomenow22 3 жыл бұрын

Great advice!!! I will do that!! Thank you

@LovelyLouLouDesigns 3 жыл бұрын

You are so welcome!

@susanamarin7342 2 жыл бұрын

I needed this! Thank you

@LovelyLouLouDesigns 2 жыл бұрын

You're welcome 😁

@britteegardin4242 2 жыл бұрын

I want to thank you so much for this video. I was having nothing but problems trying to spray paint my cups. Constantly getting wrinkles and bubbles, so frustrating. Then I tried your technique and it went on perfectly no problems. Thank you soo much.

@LovelyLouLouDesigns 2 жыл бұрын

You're very welcome! I am so glad you found it helpful!!! As you get more comfortable with it, you will get faster too. ♥️

@rhondajohnson9596 2 жыл бұрын

Thank you for that wonderful tip all this time I was using my wrist. And I didn't know about turning the spray can to stop it from clogging up so much paint wasted.

@LovelyLouLouDesigns 2 жыл бұрын

I'm so glad this was helpful! ❤️

@jill_o_lantern3283 2 жыл бұрын

I'm happy I found your video - I'm a novice spray painter/diy-er and you taught me a lot about how to avoid drips. 🙂 Thanks. - expat Canuck who remembers only-too-well Canadian winters 🥶😬🥴

@LovelyLouLouDesigns 2 жыл бұрын

Oh the winters. I already miss summer and Fall only technically started yesterday lol

@sherylldupuis6323 3 жыл бұрын

Very good video. I am too spastic to do the short bursts. 🤣. You covered everything needed to know. Thank you for that. Very informative. EXCELLENT. 🥰❤️🇨🇦

@LovelyLouLouDesigns 3 жыл бұрын

You're so welcome! 💜

@asfybylorna5920 2 жыл бұрын

Great video Lou Lou -

@LovelyLouLouDesigns 2 жыл бұрын

Thank you 💜

@SEXYMAMA11772 2 жыл бұрын

New subscriber! Awesome I had paint drips on my first spray. Won't make that mistake next time.

@LovelyLouLouDesigns 2 жыл бұрын

Thank you for subscribing 🖤

@vonellevanzant237 3 жыл бұрын

Thank you!

@Kathy-Carr Жыл бұрын

Thank you so much for this! Extremely helpful! 💐🌟. P. S. Love your logo!

@LovelyLouLouDesigns Жыл бұрын

Thank you so much! I'm glad you found the info helpful :)

@kaylapointer8108 3 жыл бұрын

Great video:) looks like overspray is painting your table as well :)

@LovelyLouLouDesigns 3 жыл бұрын

Thank you! And yes, occasionally my spray gun comes out in my workshop. I can't have nice things 🤣🤣

@funmoviesxxx2775 3 жыл бұрын

Spray painted my first one just now...yeah I shoulda watched this first lol

@LovelyLouLouDesigns 3 жыл бұрын

Oh no. Drips?

@kathleenlawrencepurrington9486 2 жыл бұрын

I tried an N95 mask and a total face covering (I could see through) and broke out on my arm, face, eyes, and ears. So getting a respirator may be the solution for using epoxy resin. THanks. Very good video.

@LovelyLouLouDesigns 2 жыл бұрын

If you are having reactions on your skin, you may need a full PPE suit.

@brookeb2032 3 жыл бұрын

Your video helped a lot. I noticed the first layer you did solid spray, the next you did short burst. How do you determine when to do what? I apologize if you said it in the video, im watching this while our tv is on lol.

@LovelyLouLouDesigns 3 жыл бұрын

You can do it either way. I was showing how you can do it both. If you have a gloss paint or want to blend colours, I find the short bursts are easier. They also use less paint. But it can get tiring if you're doing a lot.

@harrissquad0309 2 жыл бұрын

This was helpful.. What can I do about the tumblers that I have drip?

@LovelyLouLouDesigns 2 жыл бұрын

Any textured tumbler will work. Even an opaque glitter will cover most drips.

@Lediardcrew 3 жыл бұрын

I have a couple questions. Where do you spray your tumblers in the winter? Would the cold air outside affect it? Also, all that overspray, doesn’t it get on your skin and clothes? I wish I had a spray booth to catch and filter all that overspray.

@LovelyLouLouDesigns 3 жыл бұрын

I will run outside, spray and run back in. I wear old clothing or clothes specific for working in. I try to prep tumblers only on good weather days. I'm working on a plan for a spray booth with ventilation in my garage. But that is still awhile away.

@ebazileyes1475 Жыл бұрын

I wish I had watched this video before I wasted a whole can of copper spray color. It was dripping and running as soon as I started I I wiped with a cloth to get rid of it but that made it worst plus had 3 piece to spray with one can paint so it was not enough ..I didn't wait to dry between coats. I may have to sand the bad parts and get a new can to respray and do as you suggested in the video. Bummer!1😕 Thank you a million

@LovelyLouLouDesigns Жыл бұрын

Oh no! I find metallics are more likely to run that non metallics as well. Especially when they don't have a built in primer. Make sure you use a primer first and definitely take your time with it. Light coats are going to be your friend.

@Funwithbrittanyt 3 жыл бұрын

How do you seal it after the you complete it

@LovelyLouLouDesigns 3 жыл бұрын

This channel specializes in epoxy resin tumblers :)

@kathyb-007 2 жыл бұрын

Did I hear 'Canadian Tire'? S-weet. Now we're talking. A fellow Canadian. Stores will be the same. Must subscribe...

@LovelyLouLouDesigns 2 жыл бұрын

You did! I'm in Ontario :)

@amirudin5678 3 жыл бұрын

Can you making tutorial video about how to wear and fit check Respirator mask, i hope you can make it

@LovelyLouLouDesigns 3 жыл бұрын

I cover respirators to an extent in this video. It discusses what type of filter and cartridge you'll need as well as good to tell if your respirator had a good seal kzfaq.info/get/bejne/hs6ohqVpsZOqmn0.html

@amirudin5678 3 жыл бұрын

@@LovelyLouLouDesigns i hope you can making tutorial video, please

@nataschakyler2446 Жыл бұрын

What do you do if get a few drips? Sand?

@LovelyLouLouDesigns Жыл бұрын

It depends. You can try Samsung with a fine grit sandpaper, clean and spray again. If I need it to be completely and perfectly smooth though I clean with acetone and start again. Sometimes I will just use that blank for another project that I will be making with texture that will cover the drip.

@cyndeemontalvo8646 3 жыл бұрын

Can these be used to sublimate on?

@LovelyLouLouDesigns 3 жыл бұрын

No. You need tumblers that have a special sublimation coating on them. DAHT Merchandise sells sub tumblers as well.

@starkiller7057 2 жыл бұрын

How about the tumblers cover !? How do you do it?

@LovelyLouLouDesigns Жыл бұрын

Sorry, I'm only just seeing this now. I used plastic containers from Ikea and cut on opening for the arm.

@yagirl_kam8120 3 жыл бұрын

How do you spray it, without getting the inside spray painted ?

@LovelyLouLouDesigns 3 жыл бұрын

I just clean the inside with a Magic eraser and acetone.

@ashleybowes5506 3 жыл бұрын

Where do you get your tumblers from ?

@LovelyLouLouDesigns 3 жыл бұрын

I order mine in bulk direct from manufacturer.

@kishahankston186 3 жыл бұрын

what if you get drips? can you fix? or do you strip and start over?

@LovelyLouLouDesigns 3 жыл бұрын

Depending. If you are adding glitter or texture over the drips, you should be fine (especially with a more opaque glitter), but if your spray paint needs to be smooth, you will need to wipe it off and start again.

@kishahankston186 3 жыл бұрын

@@LovelyLouLouDesigns Thanks

@Welchfruitsnacks 3 жыл бұрын

Are u aloud to use regular spray paint and also are u aloud to wash it without messing up the paint

@LovelyLouLouDesigns 3 жыл бұрын

Your base paint should always have at the very least a built in primer. After the paint is dry, you can wash it if you need to with mild soap and water. Just don't use anything abrasive and be careful not to scratch it. It will be easy to scratch without the sealer. You will need the epoxy sealer to make it safe for incidental contact with food.

@Welchfruitsnacks 3 жыл бұрын

@@LovelyLouLouDesigns on will mod Podge work

@LovelyLouLouDesigns 3 жыл бұрын

@@Welchfruitsnacks not as a final coat sealer.

@tippetsm 3 жыл бұрын

Do you still spray outside during the winter?

@LovelyLouLouDesigns 3 жыл бұрын

Mostly, yes. Unless it is below 20 °C. Then I will spray in my garage. I try to check forecasts in advance and prep tumblers when the weather is good. But you can't always plan that.

@tippetsm 3 жыл бұрын

@@LovelyLouLouDesigns thank you. I live in Chicago and we are getting slammed this year so I was wondering.

@LovelyLouLouDesigns 3 жыл бұрын

I'm sorry to hear that. Despite being Canadian, I don't do winter well. I hibernate. 😂🤣

@CrystalChristianStore 3 жыл бұрын

I can't spray the tumblers outside 😩 because is cold

@LovelyLouLouDesigns 3 жыл бұрын

I hear you. We're entering that weather here now too. I run outside, spray and run back in 😂🤣

@CrystalChristianStore 3 жыл бұрын

@@LovelyLouLouDesigns lol 😆 I did last year but I noticed the cold or wind make bubbles in the paint

@LovelyLouLouDesigns 3 жыл бұрын

For sure the wind. I definitely will spray in my garage with the door open on windy days. I find I don't have issues with the bubbling as long as it's above -15° C

@CrystalChristianStore 3 жыл бұрын

@@LovelyLouLouDesigns ♥ thanks 😊

@moneymotivater5833 3 жыл бұрын

Can u smell the paint through the mask