No video
How To STOP Wheel CORROSION Before it Starts...diy
Рет қаралды 295,445
Күн бұрынBest way to protect your Chrome wheels and rims from any weather condition. THIS WILL WORK FOR MOST ALL CHROME AND ALUMINUM.
ALERT!!
THROW OUT your WD-40, PB Blaster along with all your Slick 50 because we found the best Lubricant for EVERYTHING tinyurl.com/bd...
We Guarantee you will love it.
Hello Everyone, SWEET PROJECT CARS here with cool, trick and affordable ways to do things for the DIYER'S OF THE UNIVERSE!
***********************************************
If you would like to help us out.
www.paypal.me/...
***********************************************
Use this to Really Protect goo.gl/RJa6KC
TOOLS:
"SPECIAL" Rim Protectant amzn.to/2MKI7Hb or this if the first is unavailable amzn.to/3ICHz1a
Mothers amzn.to/2C18A9Z
Eagle1 amzn.to/2B4dMJz
Buffing Ball amzn.to/2CMWsKH
Polishing Cones amzn.to/2EPeAnM
Micro-Fiber Towels amzn.to/2yTPhgR
Shop Towels amzn.to/2hK8QoD
Dewalt Hand Drill amzn.to/2AXc2ls
Drill Extension Set amzn.to/2icfIHG
12" Extension amzn.to/2kk5BVz
Clear Coat (Can) amzn.to/2SaEJ63
Clear Coat (Spray) amzn.to/2Aoveun
Scotch Brite Grey amzn.to/2kajANL
Paint Bushes amzn.to/2iyyvxJ
Index Cards amzn.to/2zRsXIz
Valve Stem Remover amzn.to/2jNqYi6
Foam amzn.to/2iwnIUM
Rust Paint amzn.to/3d1XlCU
Venom Gloves amzn.to/2B8kLBh
Rubbing Alcohol amzn.to/2iuiyID
Lac Thinner amzn.to/2ILdDPU
Acetone amzn.to/2CMH7JM
Polishing Kit amzn.to/2zppltV
Air Mask amzn.to/2B547m6
Hair Dryer amzn.to/2j3zWU4
Heat Tool amzn.to/2yXid7z
Spray Tool Set amzn.to/2BkU650
Anti-Seize amzn.to/2AgSK9a
****Disclaimer****
Due to factors beyond the control of SWEET PROJECT CARS, we cannot guarantee against the improper use or unauthorized modifications of this information. SWEET PROJECT CARS assumes no liability for property damage or injury incurred as a result of any of the information contained in these videos. Use this information at your own risk. SWEET PROJECT CARS recommends safe practices when working with tools seen or implied in our video and written content. Due to factors beyond the control of SWEET PROJECT CARS, no information contained on this KZfaq channel shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this content is the sole responsibility of the user and not SWEET PROJECT CARS.
@SweetProjectCars 6 жыл бұрын
Hello Everyone, We are happy to share this DIY Simple video, we posted it so we can help all of you keep your rims and wheels lasting a lifetime. We know there are many ways to do things, but we try here at SPC's to make it easy and simple, without making a mountain out of a molehill to get it done. We Hope you Enjoy :)
@mikeb6418 6 жыл бұрын
Sweet Project Cars Happy New Year Buddy!! Sorry been a little down and out But I’ve been watching All your videos. Thanks for taking the time out to teach us DIYfres Your a good man Mike
@SweetProjectCars 6 жыл бұрын
Thank you Mike we truly appreciate you being here with us :) Have an awesome 2018 my friend
@SweetProjectCars 6 жыл бұрын
for the rims and tires, plus tax and mounting and balancing it was over 2k...
@SweetProjectCars 6 жыл бұрын
we don't worry much about aluminum as it can be sanded down and rebuffed over and over, not as much though when we use the special protectant, now you cant do that with chrome, once it is pitted and corroded re-chrome is the only option other than buying new...but we still clear or paint the aluminum rims on the backside only and we do use self-etching where needed.
@kentstevens1349 6 жыл бұрын
Sweet Project Cars ingredients used to clean & polish
@deborahblanco8338 5 жыл бұрын
I want to say thank you for your clear instruction videos for us DYIers. I appreciate that you include us females in your conversations. I LOVE working on cars! I do everything I can on my own on our cars. I know there’s many females that won’t touch a vehicle, but I am one that does and I again appreciate you including females like me in your commentaries.
@SweetProjectCars 5 жыл бұрын
Deborah you are very welcome my dear and we believe in paying respect to all those who love working on their cars...thanks again for your great comment...mike
@gunnersmategmc 6 жыл бұрын
Top notch advice that will be taken to heart. I watch a lot of your videos and I've never scratched my head through any of them. Thanks very much you fellow wolverines.
@SweetProjectCars 6 жыл бұрын
Ken thanks so much for your great comment and support of the SPC channel :)
@Truzo 6 жыл бұрын
You sir are an artist ! Road salt is a huge problem here in England so anything to keep your car sweet I'm all up for. Keep the awesome vid's coming !!!
@SweetProjectCars 6 жыл бұрын
Truzo thanks so much for your great comment and support of the SPC channel :)
@CheekyMonkey1776 6 жыл бұрын
Great video! Thank you for sharing this information. I have a Nissan Titan I purchased new in 2012. Chrome wheel corrosion is the only issue I've had to deal with concerning this vehicle. This fix is a God send. You guys are the best!
@SweetProjectCars 6 жыл бұрын
Cheeky glad we could help my friend :)
@Surfer7901 4 жыл бұрын
WOW! Thank you SWEET Sweet Sweet Project Cars! **I put a £10 donation onto PayPal as a thank you**. Genius techniques and this will save me a small fortune! So glad I found this BRILLIANT set of Sweet Project demos on complete conditioning and prevention option for our expensive wheels. This is so well presented, for the beginner like me, you really learn. I'm in the UK where we get horrible salt and suddenly, in the space of less than 6 months, I discovered nasty corrosion under some chipped lacquer (clear coat). This is my next project. Surprising how horribly quickly this bad corrosion happens. YOU OTHER GUYS AND GALS HAVE BEEN WARNED.. We paid a lot of money for our wheels. Let's keep them good. In my case not so much second-hand, but my VW top spec standard rims new would have been something around £1500 a set. One winter of neglect can ruin a wheel, but Sweet P's tells us the genius way to protect. Better than the manufacturer did with one thin coat of clear. -After all, they just love selling wheels. I shall let you see the result when I am finished, I hope.
@SweetProjectCars 9 ай бұрын
Thank you so much!! We truly appreciate the view and donation my friend, makes all we do worth it! Glad to have you here with us from the UK, hope all is well, have a great week. mad Mike & team
@crazyhorseranchaz 5 жыл бұрын
SWEEEEET MY 2004 GMC 2500 4X4 W/ 200,000 PLUS MILES ON A 496 _8.1 BIG BLOCK, SAYS THANKS & SWEEEEET!!!! I'VE USED SO MANY QUALITY APPLICATIONS YOU'VE SHOWN HOW TOO DO ON BOTH OUR TRUCKS AND SAY SWEEEEET THANKS YOU KEEP THEM RUNNING AND LOOKING LIKE NEW. THEY ALWAYS GET THE LOOK, AND OF COURSE,, I BRAG ABOUT YOU AND YOUR CHANNEL. 🤠👍👍👍👍👍
@SweetProjectCars 5 жыл бұрын
Crazyhorse AZ thank you very much we wish there were more nice people like you
@Randy2747 6 жыл бұрын
I just accidentally ran across one of your videos and ended up watching three of them so far.... Amazing work! And thx for sharing! I'm looking forward to seeing your other videos!!
@SweetProjectCars 6 жыл бұрын
randy we have many more to come thank you so much for your great comment and support of the SPC channel :)
@coreysanders7526 6 жыл бұрын
You guys have the best DIY videos on KZfaq period! I love'em.
@SweetProjectCars 6 жыл бұрын
Corey thanks so much for your great comment and support of the SPC channel :)
@pedrofernandez3893 6 жыл бұрын
That freaking salt is a car's worst enemy, it affects just about every single component in your car.
@SweetProjectCars 6 жыл бұрын
you got that right Pedro it is a real destroyer thanks so much for your great comment and support of the SPC channel :)
@TheJared1445 6 жыл бұрын
pedro fernandez I know you'll make fun of me, but that's why I take my car through that automatic wash I work at with undercarriage. I hardly have any rust on my car from it. Yes I know it's bad for the paint, but I can fix that or repaint it. Rust is harder though.
@nightmares2night77 4 жыл бұрын
Here in Canada it fuckin sucks.... all vehicles get ruined so much faster
@1marcelfilms 3 жыл бұрын
Then drive another car in salt
@MrMisterChiliPepper88 2 жыл бұрын
@@1marcelfilms then you would be destroying that car
@MeBallerman 2 жыл бұрын
Holy mackerel. Hours and hours and hours of work - for each wheel.
@SweetProjectCars 2 жыл бұрын
You don't have to do any work, if you have unlimited funds just head right out and buy new ones my friend :) Thanks for watching, have a great day. mad Mike the hammer SPC
@MegaGmachine 6 жыл бұрын
Hey Man amazing stuff, I'm from Trinidad and I just opened a Car Care business and I'm learning so much here. Thanks alot for sharing with us.
@SweetProjectCars 6 жыл бұрын
That’s great to hear welcome from Trinidad glad to have you here with us so glad we can help
@nightmares2night77 4 жыл бұрын
BOO
@thegeneraljoe67 6 жыл бұрын
Hi. I want to start off by saying I your videos! I can appreciate all the hard work that you do and the time it takes to produce a video . I would like to comment on this particular video concerning the clear coat application on the Chrome plated Rim for Corrosion / rust Prevention. I have done this idea several years ago as a a test along with other ideas i had. They all were done at my shop , as it was my goal to prevent corrosion and rusting of rims regardless of what they were coated with . A few problems that I have faced is the clear coat will not stay on that Rim unless you scuff that surface and even if scuffed or sanded it still peeled off , but took a little longer. As you know the rim faces a lot of brutal challenges along with constant rocks and debris hitting it. And visiting the local detailer whos using whatever wheel acid that's on sale that month just worsens the situation . I have had these ideas fail and it was very disconcerting because of the time that it took it to do it . Also it seems to me the corrosion, rust, and bubbling of the Chrome starts & continues from underneath from the slightest bit of moisture entering through a seam or a hairline crack in the coating? There's nothing that I could find that would prevent it. Water would find the weakest point and eventually creep in , and it will not take years for this to happen either . I'm sorry to admit all of my testing failed and seemed doomed to happen just from a little bit of moisture getting underneath . It will start and it will grow like cancer . I'm not bashing you by any means, I think you do a great job with your videos and your knowledge however I do want to share this tidbit with you. I think this particular idea will not work for the long run or more than 2 years. Thank you for all your great videos
@SweetProjectCars 6 жыл бұрын
joe thank you for the comment...all our rims are sanded and we have never had a customer come back in 20 years where their wheels were peeling from our work, as we use the highest quality 2k clears and we have done 100's of wheels with no issues, one secret is to keep them clean in the winter when they are salting the roads. other than we have never had issues with what you are mentioning.
@crazyhorseranchaz 5 жыл бұрын
OLD VIDEO'S NEVER GO OUT OF STYLE!! HAPPY NEW YEAR 2019, FROM AZ.
@thomascarrillo4548 5 жыл бұрын
Thank God I live in the SW. No snow and rain is maybe 6 weeks of the year total. My rims only get brake dust on them.
@stephenm3874 5 жыл бұрын
Dude I just love your innovative ways. You are the man. Genius is found in the simple. You are amazing.
@SweetProjectCars 5 жыл бұрын
Stephen Moss thankyou very much my friend
@RonConsumer 6 жыл бұрын
That's a great idea... I was never that big of a fan of chrome so I started coating all my wheels with plastidip both inside and out and if it got bad on the outside of the wheel I just peeled the plastidip off and re-shot wheel. Always loved the matte black look. Another video... happy new year to you all.
@SweetProjectCars 6 жыл бұрын
Ron thanks so much for your great comment and support of the SPC channel :)
@HUBBABUBBADOOPYDOOP 6 жыл бұрын
Nicely named cleaning/polishing product. It's in the same isle as the Ronco Salad Tosser.
@SweetProjectCars 6 жыл бұрын
Hubba thanks so much for your great comment and support of the SPC channel :)
@ruggedrickrude1946 2 жыл бұрын
Imagine how much 💲💲💲this man saves the average person with his expertise and knowledge TY SCG
@SweetProjectCars 2 жыл бұрын
Thank you very much Rugged Rick, it's our pleasure to share! We truly appreciate the view and comment, have a great weekend my friend. mad Mike the hammer SPC
@dougm2681 6 жыл бұрын
Love your attention to details!
@SweetProjectCars 6 жыл бұрын
doug m thank you for being here with us and we are glad we can help my friend :) Mike
@erzincanli 6 жыл бұрын
Awesome work again. I watched every seconds of all even I have aluminum alloy rims. Today I went to tire store for balance and r/f change. Guy couldn't took off easily one cause of corrosion. I didn't use anti seize to fronts. He took his hammer and hit first to tire then rim. I stopped him ofc. But he told me "Don't worry. Nothing will happen..." I really wanna know some kind of people grow on fields or not..!!!
@SweetProjectCars 6 жыл бұрын
Said WOW they should know to never hit the rim or wheel...just the tire... thanks so much for your great comment and support of the SPC channel :)
@erzincanli 6 жыл бұрын
Sweet Project Cars Sweet Project Cars Thanks from me. Your tips are really working rather than most of here. Unfortunately I can't find some products you are using in my country or prices are very expensive than it should be. But I continue to follow with interest 👉 👏👏👏
@SweetProjectCars 6 жыл бұрын
Said we thank you for being here with us ...
@markg.2501 6 жыл бұрын
My Hero!...is there no end to the torrent of helpful car information that flows from your brain? Thanks yet again for an awesome video!!
@SweetProjectCars 6 жыл бұрын
Mark thanks so much for your great comment and support of the SPC channel :)
@JmanRx81 4 жыл бұрын
Top notch results!
@SweetProjectCars 4 жыл бұрын
thank you very much mike
@deven71 6 жыл бұрын
Thanks for this great video I live in Rhode Island and we get hit with a lot snow up here....
@SweetProjectCars 6 жыл бұрын
thanks so much for your great comment and support of the SPC channel :)
@paulfrank8625 2 жыл бұрын
Very awesome video comprehensive I appreciate all the time and effort you put into this and made it so easy for me to find the product she used thank you so much for your time and awesome video!!! 😊👍👍👍
@SweetProjectCars 2 жыл бұрын
Glad you liked it Paul! Thank you very much for the view and comment, we truly appreciate it, have a fantastic day my friend. mad Mike the hammer SPC
@TedCornish 6 жыл бұрын
My friend you are a master craftsman, superb work and very well described. Beats my old clear plasticoat spray n pray method
@SweetProjectCars 6 жыл бұрын
cornish thanks so much for that, we do appreciate it my friend :)
@3257bm 3 жыл бұрын
Great video! Doing this for my next project.
@SweetProjectCars 3 жыл бұрын
Go for it! Thank you for watching and sharing Michael, have a great day and all the best on your project my friend. mad Mike the hammer SPC
@petercrutchley6085 6 жыл бұрын
Many thanks for the excellent information ...... and your great attitude.
@SweetProjectCars 6 жыл бұрын
Thank you Peter I truly appreciate that and as far as our attitude life is too short to worry about the small stuff have a awesome day my friend
@petercrutchley6085 6 жыл бұрын
Sweet Project Cars Appreciate your response. People like you make the world a better place. Take care. Peter
@SweetProjectCars 6 жыл бұрын
Peter you are very welcome and your kind comments mean the world to us :)
@prettyboy1970 5 жыл бұрын
Great informative video. Thanks! Friendly advice: take off your wedding band when doing mechanical work. A hand injury could result in serious finger swelling and cause real problems if you’re wearing a ring.
@SweetProjectCars 5 жыл бұрын
GuestThank you very much we truly appreciate your comment and thank you for looking out for us have a great day
@donkenny1666 6 жыл бұрын
Hi from the UK.....great infomation ...love all your vids..
@SweetProjectCars 6 жыл бұрын
Don thanks so much for your great comment and support of the SPC channel :)
@rallywagon261 6 жыл бұрын
Just happened across your videos. Glad to see a fellow michigander rocking a decent yt channel. Looking forward to seeing the rest.
@SweetProjectCars 6 жыл бұрын
Rally Wagon we don't get a lot of fellow Michiganders so it is good to see you here with our many DIYer videos :)
@asablack1364 5 жыл бұрын
Great video. Thanks for sharing your secrets with us DIY’rs.
@MrWiskin 6 жыл бұрын
I am gonna subscribe just because of your accent, you sweet man!
@SweetProjectCars 6 жыл бұрын
Fellatio thank you, very much for the great and kind comments, we are very glad you are here with us :)
@NazVick 6 жыл бұрын
So meticulous! Beautifull work. Thank you.
@SweetProjectCars 6 жыл бұрын
thank you very much we try :)
@20_below 6 жыл бұрын
great video, it's cool how you show all the work
@SweetProjectCars 6 жыл бұрын
20 thanks so much for your great comment and support of the SPC channel :)
@daveisme8075 6 жыл бұрын
Wow a 28 item shopping list, That is why I don't buy those fancy rims. i have painted rims and take care of the myself. The thing I didn't see in your list is Brake Dust Repellent which I just discovered this year, it works really well and I only have to recoat every 3 months. Thanks for you video, it was very informing.
@SweetProjectCars 6 жыл бұрын
dave you did not see this in the list my friend "SPECIAL" Rim Protectant amzn.to/2CiYEse thank you very much and glad we could help, we truly appreciate it and you being here with us also :)
@ninagoldiloks 6 жыл бұрын
Spectacular look, wow. Did not kno about the care of the back side. Cool. If this vid is any indication this is gonna be a great year! TY sir. Luvit ♥💛
@SweetProjectCars 6 жыл бұрын
Nina thanks so much for your great comment and support of the SPC channel :)
@ninagoldiloks 6 жыл бұрын
Sweet Project Cars Y'all are great, with great info...easy to support. Kisses to ya! 😄😘😍😗😎
@SweetProjectCars 6 жыл бұрын
thank you so much Nina
@themanrecon6652 6 жыл бұрын
My friend thxx again for the very imformative video,out here in Jersey not only do we have to worry about road and sand being thrown on the roads in winter but that damn Brime they use is a SOB on all auto metals,gona use this info soon..Happy New Year to you and yours my friend..keep sharin...Karl
@SweetProjectCars 6 жыл бұрын
Karl my friend thanks so much for your great comment and support of the SPC channel :)
@tismgarage 6 жыл бұрын
Another thing you can do is take new rims to a ceramic applicator and have then do a ceramic clear. Its UV resistant and salt resistant. Its not a diy project but if you have a large investment into rims its always a good idea.
@SweetProjectCars 6 жыл бұрын
yes you can do this but we try to keep it simple for the home DIYer, we feel what we show anyone can do on a weekend and it works...it is far better than doing nothing at all, and it did not break their bank...thanks for sharing :)
@TheTruth4313 5 жыл бұрын
Wondering if one of the spray on rinse off silica sealant products might work fairly well and be easier then all this at least if you do it before your wheels get too dirty/worn down. I jst got some clear coated wheels I was thinking of trying the ceramic stuff on.
@SweetProjectCars 5 жыл бұрын
TheTruth4313 you can do this as well kzfaq.info/get/bejne/nd6fqMx_vZ6ufWQ.html watch our process to ceramic coating wheels. thanks The Hammer
@Hectoriousz 6 жыл бұрын
Wow better than new
@SweetProjectCars 6 жыл бұрын
Hetor thanks so much for your great comment and support of the SPC channel :)
@muznick 6 жыл бұрын
Absolutely. No way would they look that good when you buy them. That goes for anything really. Bought a new truck once and the dealer was bragging about how their long time detailer did such a great job on it. I took it home and spent an hour fixing all the smudges and places he missed with the wax.
@Kpar512 6 жыл бұрын
WOW! So many great tips here, Sweet! I have a couple of additional comments and a question. 1) A buddy of mine who happens to be a top Jaguar (mostly E-Types) mechanic told me that UV is VERY bad for chrome- your technique protects against that very well! 2) I have been changing out my chromed Acorn lugnuts every few years or so (due to rust and peeling of the chrome), I never thought of "clearing" them. Thanks. 3) I recommend putting some oil based lubricant (or maybe anti-seize) on the chamfer of the lugnuts- as you say, oil is the enemy of corrosion. My question: You cleaned off the glue from a previous wheel weight, but I noticed you did not disturb the existing wheel weight on the rim used in this video. Do you think it would be worth removing said weight to treat the rims and re-balance? As one changes tires over time, the weights will end up in a different place on the rim, requiring more efforts to prevent corrosion.
@SweetProjectCars 6 жыл бұрын
Kirk Thank you for the very useful comment it is great for the entire channel we are glad you are here with us:)
@shestrece 6 жыл бұрын
I love ur videos! Very informative & easy diy’s! Thx u very much ... *detroit*⭐️🤩
@SweetProjectCars 6 жыл бұрын
Trece Ttrece thank you so much :)
@Tec2Nut 6 жыл бұрын
Another great video , and a big hello from Co Mayo Ireland
@SweetProjectCars 6 жыл бұрын
Martin welcome and we love Ireland a visit is on my bucket list you are very much welcome :)
@Tec2Nut 6 жыл бұрын
Sweet Project Cars Any time, I do look forward to you Vids amazing stuff and a big hello for snowy Ireland
@SweetProjectCars 6 жыл бұрын
Martin thank you very much we do appreciate you here with us :)
@toamataafa4647 6 жыл бұрын
Awesome video SPC..always looking to your videos..Blessings.
@SweetProjectCars 6 жыл бұрын
Toa thanks so much for your great comment and support of the SPC channel :)
@toamataafa4647 6 жыл бұрын
Sweet Project Cars Mahalo and Aloha...Blessings.
@luvr381 6 жыл бұрын
Been subscribed since I first saw one of your videos. Thank you, and keep up the good work!
@SweetProjectCars 6 жыл бұрын
thanks so much for your great comment and support of the SPC channel :)
@tectalabyss 6 жыл бұрын
Hi SPC. Awesome information has always. and has always L,S, and added to playlists.
@SweetProjectCars 6 жыл бұрын
bobby thanks so much for your great comment and support of the SPC channel :)
@jimbola77 6 жыл бұрын
thank you partner for sharing alway's looking forward to your excellent work.
@SweetProjectCars 6 жыл бұрын
thank you Jim
@FrenchValleyAirport 6 жыл бұрын
such a good rim job looks new ;)
@SweetProjectCars 6 жыл бұрын
thanks so much for your great comment and support of the SPC channel :)
@Jimmy_Cavallo 2 жыл бұрын
💥such great info, thank you. 11:05 I’ve searched through your “see more” list but do not see your secret concoction that you are using here. It’s the most valuable part yet I don’t know what it is. 🤟🏼
@SweetProjectCars 2 жыл бұрын
Please go to the SHOW MORE of the videos description, all of the products/tools we use in all of our videos will be there. Thanks for watching, have a great day. mad Mike the hammer SPC
@mikeb6386 6 жыл бұрын
Wish they did video two months ago before all the salt on the road. It was warm too.
@SweetProjectCars 6 жыл бұрын
Mike I know sorry we are so backlogged with videos to do thanks so much for your great comment and support of the SPC channel :)
@RonMack07 6 жыл бұрын
Thank you for all of your tips
@SweetProjectCars 6 жыл бұрын
You’re very welcome my friend glad we could help
@toddlesiak3837 Жыл бұрын
I have one more question for you: I'm going to clearcoat the insides of brand-new wheels, so do I still need to use both the alcohol & lacquer thinner, & which should I use first? Thanks again for all your help!!
@SweetProjectCars Жыл бұрын
Yes use both that we recommend, use this one first amzn.to/3wIDQHd and then this amzn.to/33tPuYw make sure you use these exact products Todd. Thanks for watching and asking, have a great week and all the best on your project my friend. mad Mike the hammer SPC
@toddlesiak3837 Жыл бұрын
@@SweetProjectCars Thank you!!
@graz-e.m.s 6 жыл бұрын
Awesome shine & protect 😎
@SweetProjectCars 6 жыл бұрын
Graz thanks so much for your great comment and support of the SPC channel :)
@handyman-ir9qu 6 жыл бұрын
Happy new year, keep those videos coming.
@SweetProjectCars 6 жыл бұрын
thanks so much for your great comment and support of the SPC channel :)
@gregorygray7359 Жыл бұрын
Hi guys how do I make my 2021 Denali 1500 22 inch aluminum wheels look like Crome Do the wheels have a clear coat from GM on them that need to be removed before polishing them l would like them to look shiny like you did in this video Also what was the secret stuff you Applied at the end to protect the wheels I also live in the salt roads Thanks Greg
@SweetProjectCars Жыл бұрын
Greg, you will need to remove the clear coat, make positive that your wheels are hard chrome coated and not vacuum chromed. Then polish them up following the video instruction. If you live in salty areas, I highly suggest you use this amzn.to/3lgx0W1 to clear coat them shown in this video kzfaq.info/get/bejne/g8yblrelzL64hKs.html We have tons of videos on wheels, you can learn a lot. Thank you for watching, have a great week and all the best on your project my friend. mad Mike the hammer SPC
@diarmuidoc9427 6 жыл бұрын
Excellent work.👍
@SweetProjectCars 6 жыл бұрын
thanks so much for your great comment and support of the SPC channel :)
@exodus3155 6 жыл бұрын
Thanks for another great video.
@SweetProjectCars 6 жыл бұрын
shane thanks so much for your great comment and support of the SPC channel :)
@brucesheehe6305 Жыл бұрын
Only other way is to not drive your beautiful vehicle in salty conditions. Have a winter vehicle to take the beating.
@SweetProjectCars Жыл бұрын
Agreed! But some don't have that option Bruce. Thanks for watching and sharing, have a great day. mad Mike
@strangerdanger4212 6 жыл бұрын
My chrome wheels thank you. Hope you have a great 2018.
@SweetProjectCars 6 жыл бұрын
you as well my friend
@mrcancer6002 6 жыл бұрын
Great video man. Keep up the great work
@SweetProjectCars 6 жыл бұрын
Mr thanks so much for your great comment and support of the SPC channel :)
@hidefsteve 3 жыл бұрын
Awesome!
@SweetProjectCars 3 жыл бұрын
Glad you think so! Thank you for watching Poison Dart, we really appreciate it. Hope you have a great week my friend. mad Mike the hammer SPC
@albertosantiago2171 6 жыл бұрын
Happy New Year 2018. Great video, love your handy dandy tricks.
@SweetProjectCars 6 жыл бұрын
Alberto thanks so much for your great comment and support of the SPC channel :)
@mattmcmillan8920 6 жыл бұрын
Great video wow now that looked real good when you were done.
@SweetProjectCars 6 жыл бұрын
Matt thanks so much for your great comment and support of the SPC channel :)
@tykellerman6384 6 жыл бұрын
Damn looks brand new🤠👍
@SweetProjectCars 6 жыл бұрын
Hello Ty if you think that looks good look for the video we just put out actually look for the last two videos we just put out this week the wheel video will blow your mind have a great weekend
@ChrisPadillaAZ 6 жыл бұрын
Happy New Year! I love your videos....
@SweetProjectCars 6 жыл бұрын
Chris thanks so much for your great comment and support of the SPC channel :)
@garyr7027 5 жыл бұрын
If those wheels ever needed sanding down, they would be tough to do. Makes the aluminum ones I'm gonna do look like a piece of cake... i won't be complaining about anymore.
@SweetProjectCars 5 жыл бұрын
Gary Riefle they will never need sanding...they are chrome
@garyr7027 5 жыл бұрын
@@SweetProjectCars i see, good thing then.
@LordJesusIsGodAmen 6 жыл бұрын
Just in time. I have some new chrome rims sitting in my dining room that will go on my Foxbody once it gets out of the body shop, and I was looking for a way to treat them before putting them on.
@SweetProjectCars 6 жыл бұрын
there you go good luck with it :) thanks so much for your great comment and support of the SPC channel :)
@bperry8940 6 жыл бұрын
Sweet Project Cars uhhg pllx
@harlodg4355 3 жыл бұрын
great vid. however, i have bad knees, are there places that would clean them like you're doing?
@ssbrutal 3 жыл бұрын
You can get ahold of your local detailer I'm sure one of them will do it
@SweetProjectCars 3 жыл бұрын
I'm sure there are Harlod. Thanks for watching, have a great day. mad Mike the hammer SPC
@williamweir300 6 жыл бұрын
If and when you come over i would be very happy to show you about glasgow
@SweetProjectCars 6 жыл бұрын
William that sounds awesome We might take you up on it my friend :)
@bleepnsheep2310 6 жыл бұрын
Should remove tire aswell. I have similar rims condensation corroded one through from the inside. I'm never going to waste money on these chrome plated pot metal rims again.
@SweetProjectCars 6 жыл бұрын
I’m with you they are not the highest quality of rims that’s for sure we tell people they should buy aluminum rims then we will polish them to a chrome finish and then ceramic coat them thank you for sharing my friend have a great day
@marlonalva 3 жыл бұрын
Hello Mike! Thank you again for another great vid! 👍🏼👍🏼 Question, I live in NC and we don’t have much problem with corrosion here, do I really need the clear coating on my wheels? Will the clear help to keep them cleaner longer? I’m watching ALL your Cleaning Wheels videos because I’m about to polish my aluminum wheels. I’ll be using all your techniques and products. 😎 Sweeet!!
@SweetProjectCars 3 жыл бұрын
Watch this Marlon kzfaq.info/get/bejne/g8yblrelzL64hKs.html it's fantastic! Thank you very much for watching and asking, have a great day my friend. mad Mike the hammer SPC
@toddlesiak3837 Жыл бұрын
Do you need to use primer on the inside of the wheel before using the clearcoat? I thought the clear won't properly bond to the chrome unless it's primed first. Thank you
@SweetProjectCars Жыл бұрын
If you use this amzn.to/3wIDQHd and use this amzn.to/33tPuYw it will bond beautifully Todd, of course try to keep nice wheels out of salt/chloride type environments, but we know that most people who have nice wheels don't use them in the winter. Thank you for watching and asking, hope you have a great week. mad Mike the hammer SPC
@toddlesiak3837 Жыл бұрын
@@SweetProjectCars Thanks for the help!
@melodicdreamer72 6 жыл бұрын
I didn't do much to maintain my chrome S95 Cobra wheels and didn't think anything of it until earlier this year when I took the car out and heard this horrible clanking sound. I thought there was some brake problem or something else more serious before finding the chrome had peeled up and started to make contact with the brake caliper. While that chrome might be thinner than what's on the outer surface, it is thick enough to make a heck of a racket when it gets like that. It looks like eventually I'll have to have the wheels refinished. I don't think there is any saving it as they are now. Bummer...
@SweetProjectCars 6 жыл бұрын
melodicdreamer72 that is a bummer but hey you may end up with some new wheels in the future and thats good :)
@nihilisticpunk24 2 жыл бұрын
How is clear coat able to adhere to such a surface? Is it different from non clear paint in that it doesn’t have to have a sanded surface to stick to?
@SweetProjectCars Жыл бұрын
When you follow the process the clear adheres like crazy glue my friend. Thanks for watching, have a great day. mad Mike
@MrEyad1990 6 жыл бұрын
Awesome stuff , really good.
@SweetProjectCars 6 жыл бұрын
you are very welcome my friend and thanks for being to see our many DIYer Tips :)
@DET_C0RD 2 жыл бұрын
Would I be better off using spray clear coat or brushing it on? Getting new rims soon and I’d like to do this before they even think ab start corroding.
@SweetProjectCars 2 жыл бұрын
Do this kzfaq.info/get/bejne/g8yblrelzL64hKs.html it's the best we've found Mike, you will love the results my friend. Thank you for watching and asking, have a great day. mad Mike the hammer SPC
@cigarcaptain 6 жыл бұрын
worth the effort
@SweetProjectCars 6 жыл бұрын
cigar thanks so much for your great comment and support of the SPC channel :)
@jimbola77 6 жыл бұрын
very vey nice partner you can make a lot of$$$$$$ with them excellent skill's you have achieved! thank's a million for sharing!!!!
@SweetProjectCars 6 жыл бұрын
Jim thanks so much for your great comment and support of the SPC channel :)
@joshuaneal4125 6 жыл бұрын
Excellent! Wish this video came out a month ago. It's 25℉ in NC. Guess I'll wait till spring to do my 2013 F150 wheels
@SweetProjectCars 6 жыл бұрын
Joshua if they start putting salt on the roads spray them down with some wd40 to get you by until spring thanks so much for your great comment and support of the SPC channel :)
@timwilhelmson8707 6 жыл бұрын
love the tips
@SweetProjectCars 6 жыл бұрын
tim wilhelmson thank you very much my friend :)
@ScotWalt858 6 жыл бұрын
Wow! Very nice. Might be moving back to the midwest in a few years, will have to keep this in mind. My apologies if this is a "less than intelligent" question, but why not clear both side?
@SweetProjectCars 6 жыл бұрын
Scott Walters we use this video for those who want to really protect the outside kzfaq.info/get/bejne/nd6fqMx_vZ6ufWQ.html thank you very much, my friend, we truly appreciate your comment! :) Please share our channel that would really help us out !!
@denisparker4916 6 жыл бұрын
What a nice guy
@SweetProjectCars 6 жыл бұрын
thank you very much :)
@SweetProjectCars 6 жыл бұрын
this may be correct on some, but most all have Jump points you can connect to just for jump starting
@petercrutchley6085 6 жыл бұрын
Excellent video as always. Many thanks and best wishes for 2018.
@SweetProjectCars 6 жыл бұрын
Peter my friend thanks so much for your great comment and support of the SPC channel :)
@soulless7192 6 жыл бұрын
BEST KEEPE'D SECRET'S . THANK'S. ALWAY'S GOOD VID'S! 😆
@SweetProjectCars 6 жыл бұрын
soul thanks so much for your great comment and support of the SPC channel :)
@marqueemolina6929 2 жыл бұрын
Do you still recommend wheel waxes for chrome looking aluminum wheels ?
@SweetProjectCars 2 жыл бұрын
This goo.gl/z9TrgR is what you want to use if you don't want to have to do it again Marquee. Thanks for watching and asking, have a great week my friend. mad Mike the hammer SPC
@Goo-Yee 2 жыл бұрын
How do u recommend cleaning inside were the lug nuts go u said brush but I do not see one in the links thank you
@SweetProjectCars 2 жыл бұрын
Not sure, are you trying to clean the areas because they are corroded, we use this amzn.to/3iX0tCx otherwise wash as normal with these amzn.to/2yP98Cw Thank you for watching Goo Yee, have a great day. mad Mike the hammer SPC
@Goo-Yee 2 жыл бұрын
@@SweetProjectCars yes I am trying to clean them because they are corroded but those brushes would not scratch the chrome?
@tykellerman6384 6 жыл бұрын
Nice job
@SweetProjectCars 6 жыл бұрын
Ty thanks so much for your great comment and support of the SPC channel :)
@smh4536 6 жыл бұрын
amazing vid
@SweetProjectCars 6 жыл бұрын
Sean Harold thank you very much, my friend :)
@shaeshae9831 6 жыл бұрын
Yes us michiganders love us some rims Detroit
@SweetProjectCars 6 жыл бұрын
LOL you got that right :)
@fredpearson5204 5 жыл бұрын
Don't neglect the spokes!
@battlesox9565 6 жыл бұрын
GREAT VIDEO! How would you address this for painted wheels? I've been struggling w satin black painted wheels. The only product I use with success as far as making the wheels look rich "black" is a product I've been getting from a friend. I'm wondering if I clear coat the satin will it maintain the look like when the wheels were new? I've only used them a few months and unless I use this product my wheels look dull on the barrels. The outer part is machined with a clear coat. thanks
@SweetProjectCars 6 жыл бұрын
Battlesox this is the video I would do on painted wheels kzfaq.info/get/bejne/r6h8qMuTnJjLooE.html we are actually doing a video on this, this week or very first of next, it will be done on chrome wheels but the same principle applies for painted wheels as well.
@battlesox9565 6 жыл бұрын
Thank you. I will take a look. Much appreciated. Keep up the great work...
@faustsmith 4 жыл бұрын
Which primer should I use before spray painting a plasma vapour coating process chrome finish aluminium alloy wheel over the existing chrome finish described?
@luissierra5598 5 жыл бұрын
Nice and specific i like that
@MrStreetmedik 6 жыл бұрын
I clean my chrome running boards twice a week. How can I keep them clean? Will waxing the chrome work?
@streetsurvivor687 6 жыл бұрын
Good Video
@SweetProjectCars 6 жыл бұрын
street thanks so much for your great comment and support of the SPC channel :)
@danhill2382 3 жыл бұрын
Hello, I was just wondering if you could provide a another link for the rust paint? The one that you have in your description has been removed.
@SweetProjectCars 3 жыл бұрын
This amzn.to/3d1XlCU Thank you so much for watching and letting us know about the link Dan. Hope you have a fantastic day. mad Mike the hammer SPC
@John-mh6mi 5 жыл бұрын
The auto parts store recommended acrylic based clear coat? Not right I am guessing?
@SweetProjectCars 5 жыл бұрын
Jeff Williams you just need a good 2k clear coat any will work great for this my friend ty mike
@enedifanovaha7713 3 жыл бұрын
What about if it's rust please
@SweetProjectCars 3 жыл бұрын
If they're chrome and rusted, they're toast and you are better off just buying new as re-chroming is very expensive. Hope this helps. Have a great day. mad Mike the hammer SPC
@troy9864 6 жыл бұрын
Awesome video! Question though: How about when it comes time to have your wheel balanced at the shop and they have to scrape the old wheel weights off the inside? Wouldn't this damage the clear coat?
@SweetProjectCars 6 жыл бұрын
tee roy when they move the weights to another place on the rim when blanaced you will just re-clear the area where the weight previously was located thank you very much for your great comment and we are glad we can help :)
@antonio30824 6 жыл бұрын
Hey do y'all have any video on leather seat repair? Mines cracked today when I was vacuuming it out. As my elbow was pressing down on it.
@SweetProjectCars 6 жыл бұрын
Block we have many leather repair videos take a look through our archives :)
Right Now Powder Coating
Рет қаралды 168 М.
Harley Quinn with the Joker
Рет қаралды 12 МЛН
1A Auto: Repair Tips & Secrets Only Mechanics Know
Рет қаралды 177 М.
6th Gear Garage
Рет қаралды 1,6 МЛН