No video
How To: Sublimate A Ceramic Mug
Рет қаралды 151,888
Күн бұрынIt is Friday and therefore time for another How To video! This week Adam takes you through how to sublimate a ceramic mug. Adam is using our 11oz Sublimation Mugs and a JTrans heat press.
Here are the templates: (If you can't see them please email adam@dyesublimationsupplies.co.uk and ask for the link)
www.dropbox.co...
Happy Sublimating !
Find us at www.dyesubliamtionsupplies.co.uk or if you are interested in the products used throughout this tutorial take a look at the links below:
Ceramic Mug
www.dyesublimat...
Heat Press
www.dyesublimat...
Reiver Media 'Ashness' Dye Sublimation Paper
www.dyesublimat...
Thermal Tape
www.dyesublimat...
Heat Resistant Knitted Cotton Gloves
www.dyesublimat...
@handichick 3 жыл бұрын
To make it easier to remove the tape WITH gloves, try bending the tape onto itself to create a “tab” on the end big enough to pull off. That way you’re not fumbling around trying to peel off the tape nearly burning your fingers as shown in this video (at 4:30)
@joanneamandadesigns6534 3 жыл бұрын
That’s a fantastic idea. Thanks
@handichick 3 жыл бұрын
@@joanneamandadesigns6534 I tested it and it works. Another thing is if you don’t have a tape dispenser you can do two twirls of the tape then cut and that creates a type of easy grab “tab” too. That’s my go to method I do since those tape dispenser are so expensive.
@ChristyHardaway 8 жыл бұрын
Thank you so much for the info on heating the base! I kept trying to figure out why the bottom was cloudy.
@dyesubtv9210 8 жыл бұрын
+Christy Hardaway hi, glad you found it usefull took me a while to figure that one out. Adam
@nandihenrico2268 6 жыл бұрын
is it at all possible to change gel cartridge on Ricoh printer to liquid?
@brusmaker1050 4 жыл бұрын
Dye Sub TV Witch paper is it. The link is not working. Please send a new one to me.
@MelanaC 4 жыл бұрын
Brusmaker 10 do you need the template link? Or do you want to know which paper to use for sublimating ?
@jackievargas3608 2 жыл бұрын
Hello. Can u provide link for mug template? Thank you
@martinlissjohansson3943 4 жыл бұрын
Thanks for the presentation! Just would like to know if there is any special ink for the sublimatio? or just any print ink? Cheers!
@MelanaC 4 жыл бұрын
Martin Liss Johansson you need sublimation ink... and a heat press :)
@ahmedalexandrvic7657 Жыл бұрын
you saved my life man thank you
@face909 4 жыл бұрын
i'm so late but do the mugs have to be coated or can any ceramic mug be used?
@anettesnyman1507 2 жыл бұрын
It has to be a sublimation mug, I've seen people buy a sublimation coat and put it on a normal mug to sublimate
@HECTORJABUNDISJR 2 жыл бұрын
Do you guys know what kind of paper I can use to heat press a coffee mug? I have a seeutek 5 in 1 heat press and an Epson XP 15000 printer.
@bettyjohanson8020 4 жыл бұрын
Do you need a certain type of mug or could you use any type
@RealWizardry 3 жыл бұрын
Is there anything special about the ink / printer? I presume the image needs to be printed onto a specific material?
@adrianwilliams-ug2lf 3 жыл бұрын
can you use any mug and ink or are they special ones that you have to buy?
@AshfanSaja 3 жыл бұрын
I have the same question
@newfieflip 3 жыл бұрын
@@AshfanSaja I also want the same question answered? Any type of mug and can i use HTV
@Violetasnaturalscents 4 жыл бұрын
My first mug is always perfect but another and another one faded ?? Why is like that?
@tommymisenhimer1056 6 жыл бұрын
All sublimation coffee mugs you can get off e bay or Amazon very reasonable they come from China I found a dollor store where I get mine but beware not all dollor stores are the same product if you try a dollor store just get a few to try out first
@christalmarriot1038 3 жыл бұрын
Is sublimation mugs the same as color charging mugs or magic mugs
@tommymisenhimer1056 6 жыл бұрын
Fore coffee mugs and plates use sublimation papper as mugs and plates I get mine at a dollor store thay woork
@kkeaton6996 3 жыл бұрын
I was told I couldn't use dollar store mugs. Do you still use them. I know this post is old
@abiolakirton911 4 жыл бұрын
I used a submilation printer with sublimation paper, but my image was NOT transfer to the ceramic mug, plz shine some light
@18Janeen 3 жыл бұрын
Did you use a sublimation mug? Basic mugs won't work, it must have the proper glaze.
@RocksWA 8 жыл бұрын
Hi. In your humble opinion, is an inkjet printer ok for mugs or is a sublimation specific printer best? Thanks RP
@tommymisenhimer1056 6 жыл бұрын
Rachel Prudham as long if it uses pigmentation ink
@loriwilhelm1548 3 жыл бұрын
I use an Epson Printer with the sublimation ink
@alanwaggett6593 7 жыл бұрын
hi i use sublimation-blanks and galaxy v2 press and 11oz Dino Glossy Duram style mug at 180c and 180sec and works great but i was think of buying sum 11oz Polymer Mug and insert at in this video
@ChaosShipaby 6 жыл бұрын
I have problems with printing black color, its looks burned
@dyesubtv9210 6 жыл бұрын
You may need to reduce your time or temperature, settings do vary from press to press so it can take some adjustment to get the right combination
@danbarb9728 4 жыл бұрын
Wow, this is now the 10 video i have seen and the 10th different temperature/heat setting :) Pretty confusing i would say. Whats also confusing is that some give the press time in complete and some give the press time from the moment the press reaches the aimed temperature. The last temperature setting i saw was 165 C and 90 seconds.
@MelanaC 4 жыл бұрын
Dan barb every machine is different as it depends on the heat collar/plate. Go by the manufacture specifications or contact the supplier. My heat press has a button mode and I select for what I want to press - mug t shirt cap etc. Then it has heat settings for that product as the heat required depend on the product thickness, shape, structure etc
@marymargaretconley 2 жыл бұрын
is this is Imperial or Metric? 180 C = 356 F
@kostakostou2479 8 жыл бұрын
Hello mate.. Can I ask you a question please? I followed your directions and mugs come fine.. But sometimes they come very dark colors... I play sometimes with the pressure.. Could be from very high pressure? I try to use heavy one.. But most if the time they are like burned...and dark...with the same heat press I see some use much less like time? Could you advise please? My press is the same and another problem I saw is that the platen doesn heat equally on the end it is like 40-50'C less.. But I just put the mug to the other end and avoid that issue.. Just that bloody dark colors.. Do I over cook it or too high pressure.. Wasted to many mugs already... Thanks mate
@dyesubtv9210 8 жыл бұрын
If the mugs are coming out as burnt then they are either been cooked on too high of a temperature or for too long, pressure may have some part too play as we'd normally go for a medium/firm pressure rather than the heaviest
@nadiagillylan2331 5 жыл бұрын
Hi, thanks for this video. Would you be able to share the type of program you use to format and measure the pictures before printing?
@dyesubtv9210 5 жыл бұрын
Hi, thanks for the comment. when printing designs here i use Adobe Photoshop
@panamono9217 4 жыл бұрын
You can use Corel Daw, Adobe Illustrator if you want to add text!!
@MrBullydog34 7 жыл бұрын
Hello, I have the exact mug press and am using your exact time and temp. The picture comes out great on a white mug but wherever there is no picture, it turns yellow from the paper??
@lesliehaycock2860 7 жыл бұрын
You are leaving the mug in the press to long
@aarongrier8150 5 жыл бұрын
Thanks for making it simple
@murdomackay7438 9 жыл бұрын
hi I don't see the link for the template for the mug
@tommymisenhimer1056 6 жыл бұрын
Murdo Mackay 180
@warmembracespabychrisville5297 4 жыл бұрын
Just wondered if you have to use special paper and ink? Can you use vinyl for your image?
@18Janeen 3 жыл бұрын
You can use printable vinyl, transfer to the mug but since it's not heat transferred you must seal it with dishwasher safe ModPodge. Even then hand wash only.
@MJT2707 5 жыл бұрын
Very helpful. Thanks so much for taking the time to share
@FillHandle 6 жыл бұрын
thank you for the info. very good to know
@18Janeen 3 жыл бұрын
What kind of a sublimation printer do you use?
@deocarlogalut7765 4 жыл бұрын
Why does my design does not stick to the mugs? Ive try for about 3mins and 200c. My paper is A Sub sublimation paper and my printer is epson wf2010 . What you think is the problem?
@dianez1327 9 жыл бұрын
thank you I have the same question as previous comments, I do not see the download, could you help me to locate. thanks
@-30h-work-week 6 жыл бұрын
But dye sublimation will fade and scratch, right? What is the best technique for: Bright colors that don't bleed into each other, stay well defined, won't scratch, won't fade from light and repetitive washing?
@dyesubtv9210 6 жыл бұрын
The print will last as long as the coating on the mug, a good quality sublimation mug should last about 3000 dishwasher washes and is consequently pretty hard wearing. Other options would be screen printing, laser transfer or I think you can us UV printing as well.
@goldieholzer9708 6 жыл бұрын
how do you laser transfer. I have a laser, and a million inkjets, including a large format....but this is sounding too costly just to have fun with saddle club awards, etc. if I have to buy another printer.
@gonzo2.0 4 жыл бұрын
You are sublimation at 180 degrees fahrenheit? That seems way to low are you talking celsius?
@noahauerbach1035 4 жыл бұрын
UK we work in ⁰C and not ⁰F so yes 180 celsius
@Rockysbeats 7 жыл бұрын
you did not mention that you need special mugsand special paper and special inks to do this. from this video it just looks like you can use any blank mug and normal ink
@tommymisenhimer1056 6 жыл бұрын
CJ Rocky I get my mugs from a dollor store as ink pigmentation ink only
@summerjohnson4503 6 жыл бұрын
Tommy, so you don't have to use a special kind of mug?
@tommymisenhimer1056 6 жыл бұрын
summer johnson not allways I get mine from a dollor store
@tommymisenhimer1056 5 жыл бұрын
73Corbin thank you dident know that
@tommymisenhimer1056 5 жыл бұрын
73Corbin question fore you my equipment is mounted in my van fore Mobil I have Epson c88 printer works great now I go to places has no WiFi at all what kind of cheep printer can I get to use out of WiFi range
@oneconnectshow442 4 жыл бұрын
My question is, is there something you spray on the mug before or you just print the paper and do the sublimation?
@TempleofBlackEroticism 4 жыл бұрын
Just print
@davidfitcher2953 4 жыл бұрын
ah, the Moog is doone?
@donnamccarroll 5 жыл бұрын
What sort of printer do I need to print the image?
@usedbyjesus 5 жыл бұрын
U need a sublimation printer or sublimation ink..
@sunseeker8457 5 жыл бұрын
You can use an inkjet printer, but you must use sublimation ink in it. The ink can not be used in all inkjet printers. So find out if yours can. Or buy a sublimation printer. They are the same has inkjet printers, but just made for sublimation like the Sawgrass SG 400.
@krispinktattoostudio1916 4 жыл бұрын
Hi we bought a ricoh printer and would like advice on which pigment to use
@nandihenrico2268 6 жыл бұрын
how do I change a gel cartridge on the Ricoh to a liquid cartrigde? is it at all possible?
@korenasloane2142 2 жыл бұрын
Do you have to still mirror your images for a mug like a t-shirt?
@kimberlyrynders9877 6 жыл бұрын
Can you tell me exactly what products you used? Links to the products would be SO appreciated! (Printer, transfer paper, ink, heat press) Thank you!!!
@tommymisenhimer1056 6 жыл бұрын
Kimberly Rynders I use a epson printer as long if it is pigmentation ink as papper sublimation papper you can get 100 sheets from e bay at a time reasonable as coffee mugs I get mine from a dollor store but also be careful using them
@sunseeker8457 5 жыл бұрын
Kimberly. If you are still looking for information about sublimation products etc. Then start here. He is from the UK and has been doing this longer than me. His channel has about 33K. He does videos about everything including problems etc. kzfaq.info/get/bejne/ht-Iacl0sa-Yn30.html
@leereedembroidery 3 жыл бұрын
Thank you
@DivineEssencepoet 6 жыл бұрын
Is there any reason you didn't use a sublimation mug? Im torn between ceramic and sublimation mugs. I keep being told its best to use sublimation. Thanks for your response.
@dyesubtv9210 6 жыл бұрын
This is a ceramic sublimation mug, it is a ceramic mug with a dye sublimation coating on it, you will need to use sublimation coated blanks to use a sublimation transfer
@DivineEssencepoet 6 жыл бұрын
Dye Sub TV thank you
@DivineEssencepoet 6 жыл бұрын
Are your templates exact to size for the 11 oz mugs?
@evelladesign 5 жыл бұрын
Hey, when I put my mug in at 110°c to heat up to reach 180°c, it seems to stop heating up...jumps down and slowly increases and also just stays at the same temp. I'm afraid to leave my mug in there far too long.. is there a better way to heat the mug? Or am I doing it wrong? Thanks
@sunseeker8457 5 жыл бұрын
Hi Aoife. When you put your mug into the press the temp will go down in the beginning. This is because the mug is cold and your press isn't (if your press is in standby mode). So it is normal for it to do this. But only when you put your mug in at the start. If your mug press temp is going up & down, you need to contact the people you brought your press from.
@TazDoll16 4 жыл бұрын
No matter what combination I used, I keep getting a yellow residue ON the mug from the heat tape. I'm starting to think my tape quality is the problem, but wanted to post here in case anyone had an answer I'm not thinking of. Setting have included 350*/180sec, 250*/180 sec, 350*/120sec, and 350*/120sec but the lightest pressure I could get on my particular press. With the exception of the 250* temp one, all the colors came out good. But that was also the one that had no tape mark on it! All the rest have the tape marks :(
@MelanaC 4 жыл бұрын
TazDoll16 I suggest getting new tape. If it’s that then easy fix and if not the at least it has got rid of that question.
@TazDoll16 4 жыл бұрын
@@MelanaC I ended up changing my tape and it was absolutely the tape quality that was the problem. One thing I could NOT chintz out on! Thanks for the reply!
@jasongiles1191 6 жыл бұрын
hi there can you use a normal Ceramic Mug ?
@dyesubtv9210 6 жыл бұрын
The mug would have to have a polymer coating in order to be able to hold the ink so I would recommend getting mugs for sublimation as they are pre-coated
@jasongiles1191 6 жыл бұрын
Dye Sub TV ok thx for the fast reply and much appreciate it and the help
@tommymisenhimer1056 6 жыл бұрын
jay I get my mugs from a dollor store
@911HerbalinfoGoneRaw 5 жыл бұрын
So I use regular printing paper to do this? I've got a photoprinter and it prints the images beautifully. Can I adjust my images accordingly in my cricut machine if I use regular printing paper? Or do I have to use the software recommended to resize my images? Thanks!
@selenabenavidez839 5 жыл бұрын
You have to have a specific type of printer to do this, as well as sublimation paper/ink. You can use your cricut machine as the program for creating your projects.
@sunseeker8457 5 жыл бұрын
@@selenabenavidez839 No you do not need to have a special printer. Some normal inkjet printers will work (but not all). You must use sublimation ink. But you do not have to use sublimation paper. You can use normal copy paper or laser printer paper. PhotoShop works perfect for printing, even PhopShop Elements: Watch this: kzfaq.info/get/bejne/fbZghtqQzeDHlo0.html
@LuvRainKinnyaani 3 жыл бұрын
Can you only use the printed piece once??
@emugeneralimporterp.l.c6608 6 жыл бұрын
good day, kindly let me know if i can use image transfer prepare for mug. i used image transfer paper and the image got in mug in nice way but the picture would measly remove by easy way scrap off. please help me why this happened .
@MelanaC 4 жыл бұрын
Emu General image transfer paper does exactly that... it transfers a sticky coating from the paper to the surface. This will wipe or peel or scrape off... This is for things like t shirts or canvas bags to cheaply and quickly pop an image on with an iron. This machine in this video is a sublimation press. It uses the physics & chemistry of sublimating the ink into the coated surface of a sublimation blank. You need the right ink on the right paper and the right mug to make this work with a heat press
@marisathom4226 4 жыл бұрын
Can I use tapered mugs in this machine? I also have a 17 ounce mug. If I wanted to have a a smaller image can I put that mug in?
@18Janeen 3 жыл бұрын
Unfortunately tapered mugs don't work
@dyesubtv9210 9 жыл бұрын
hi guys sorry for the late reply i have been away on holliday YEY!. It seems the link has gone wrong i will fix that today
@ciorstaidhyoung3 7 жыл бұрын
Still no link??
@dyesubtv9210 7 жыл бұрын
It keeps dropping it for some reason, here it is: www.dropbox.com/s/qjxxoqbr51owt5y/Print%20template.jpg?dl=0
@chrissysmith9663 3 жыл бұрын
I keep getting white marks come out on my mugs, what causes that?
@JanetDiaz6152 6 жыл бұрын
Thank you.
@asp9990 6 жыл бұрын
Hi, I have followed your instructions using sublimation mugs, a Ricoh printer with sublimation ink. The mug is faded on the print. I have printed the images as a tiff and others. Neither of them work. I have waited until the temp was raised on the mug before commencing the cooking process. All have come out faded! Any help or ideas of what I’m doing wrong would be gratefully received....
@dyesubtv9210 6 жыл бұрын
Hi, if you email the results you are getting through to info@dyesublimationsupplies.co.uk we will see if we can offer further advice!
@DivineEssencepoet 6 жыл бұрын
would you happen to have a 15oz template? or where to download one?
@rulys168 7 жыл бұрын
I heard you should dunk it warm water after ? Is this true ? And what for ?
@amlaboy 6 жыл бұрын
It stops the sublimation process and prevents color bleeding/shadowing. You should remove the transfer paper immediately once it comes out of the sublimator.
@DivineEssencepoet 6 жыл бұрын
Might be a silly question but did you print your sublimation paper with a sublimation printer?
@dyesubtv9210 6 жыл бұрын
yes i printed this transfer through a ricoh 3110dn printer with sublimation ink
@reginawarigi3191 6 жыл бұрын
Can I use Epson artisan printer
@tommymisenhimer1056 6 жыл бұрын
Divine Valentin all printers using pigmentation ink only
@tommymisenhimer1056 6 жыл бұрын
Regina Warigi as long if it uses pigmentation ink
@LordAndyvaile 5 жыл бұрын
hi i tried doing a mug for the first time i got the sublimation paper and the dye/inks and did what you did but the result is a blank hot mug ...ant ideas why
@Christopher-fz4cw 5 жыл бұрын
Make sure you're using the correct side of the sublimation paper
@sunseeker8457 5 жыл бұрын
Were you using a sublimation mug? You can not use any old mug. It has to have a sublimation coating on the mug.
@SharkFishSF 7 жыл бұрын
hi, that's a great and simple video, I have a query, could you let me know how to remove the sublimation coating only? I have 200 of them which are transparent but they're coated and hence in frost color texture now. thanks in advance.
@dyesubtv9210 7 жыл бұрын
Hi, unfortunately, we don't have any tips for how to remove the sublimation coating, sorry!
@SharkFishSF 7 жыл бұрын
Dye Sublimation Supplies so sad 😞 I was excited
@imagecollections6665 5 жыл бұрын
is the image printed with inkjet or a laser printer?
@jordancook1836 4 жыл бұрын
Hi, Ive followed the steps in the video but my image on the mug looks very faded. Have you come across this before? Thanks
@MelanaC 4 жыл бұрын
Jordan cook make sure your print quality is high and that you are using sublimation paper, sublimation ink and a printer that has print heads capable of printing with these
@jordancook1836 4 жыл бұрын
Melana C thanks for the reply. All sorted... I had the paper the wrong way round 😞
@nicolelovell8207 8 жыл бұрын
I can't see the template either?
@joemccullagh613 6 жыл бұрын
Which is better sublimation paper or heat transfer paper on mugs
@tommymisenhimer1056 6 жыл бұрын
joe mc cullagh fore mugs and plates sublimation papper
@sunseeker8457 5 жыл бұрын
@@tommymisenhimer1056 You do not have to use sublimation paper. You can use normal copy paper or laser printer paper. And you should spell `for´ with no `E´ on the end. Watch this: @
@allthingspersonalized2940 5 жыл бұрын
thanks for the video & template
@andresarguello7971 2 жыл бұрын
Hi!! I have an answer...what about the print quality? It has to be an specific brand of printer o the only thing that it changes is the "paper" ? Thank you so much i liked the video
@leannetweedie2148 5 жыл бұрын
Do you have the link for template please
@jtdoug1248 5 жыл бұрын
Can you take an SVG and sublimàte it
@LuvRainKinnyaani 3 жыл бұрын
Greetings what software are you using to edit? I've tried many. Nothing great so far. .?
@nereyda515 3 жыл бұрын
I use affinity and it’s really good
@Coco-qy6st 7 жыл бұрын
Could you use a similar method on metal?
@dyesubtv9210 7 жыл бұрын
Yes! There are a few different metal items available, it does need to be coated with a polymer sublimation coating but you can buy some things already coated. This video shows how to sublimate a metal insert for for a tin: kzfaq.info?o=U&video_id=NEvIEG6mVMw
@tonisilverthorn6160 7 жыл бұрын
Is there a link to the template?
@jennytan8722 6 жыл бұрын
hi.. what software are you using for the photo editor? what kind of ink you are using aside from the sublimation paper?
@dyesubtv9210 6 жыл бұрын
Hi jenny, I use Adobe Photoshop or illustrator to create images and i primarily print from photoshop. At dye sublimation supplies we primarily use sublisplash sublimation ink
@tommymisenhimer1056 6 жыл бұрын
Jenny Tan ink has to be pigmentation only
@jennytan8722 6 жыл бұрын
Tommy Misenhimer thanks for the reply...
@tommymisenhimer1056 6 жыл бұрын
Jenny Tan your welcome you can get the mugs off e bay or Amazon responsible thay come from China I found a dollor store where I get mine but beware not all dollor stores are the same get a couple to try out first to see I was lucky
@ryandinhotenacious3999 6 жыл бұрын
can i do sublimation on ceramic mug or or afto be sublimation mug
@dyesubtv9210 6 жыл бұрын
Hi, it will need to be a ceramic mug that has been coated for sublimation
@thedoc6248 4 жыл бұрын
so you put extra tape on vs. what you show people to put on at first so people really have to pay attention or this video is not going to give them the best results
@WithYalo 5 жыл бұрын
Which paper do i use to print on mugs like these?
@berna8688 5 жыл бұрын
Alphxa Hey there! It’s a special type of paper named Sublimation paper, now there are many brands out there, but never buy Chinese paper.
@sunseeker8457 5 жыл бұрын
@@berna8688 You do not have to use sublimation paper. You can use normal copy paper or laser printer paper. Watch this: kzfaq.info/get/bejne/fbZghtqQzeDHlo0.html
@jamr6902 6 жыл бұрын
Please may I know what kind of printer, ink and mug to use?
@dyesubtv9210 6 жыл бұрын
Hi Jacqueline, for the video we used a ricoh sg3110dn printer with sawgrass ink and a JTrans press. We wouldn now recommend going for a ricoh sg3110dn still but with Sublisplash ink and using a Double Digital Mug Press
@felixking3505 7 жыл бұрын
can we use a standard transfer paper
@usedbyjesus 5 жыл бұрын
No use sublimation paper and use sublimation ink..pigment based ink preferred
@Evelyn-si5jj 8 жыл бұрын
Hello! Can I use my Epson to print the images or do I nee a sublimation printer? Thanks
@dyesubtv9210 8 жыл бұрын
Hi Evelyn, You will need to use some form of sublimation printer. they use specialist ink that bonds with the coating on the mug Hope this helps Adam
@Evelyn-si5jj 8 жыл бұрын
So helpful! Thank you so much!
@Evelyn-si5jj 8 жыл бұрын
Question. I have an Epson WF 3640... Can I use sublimation inks?
@dyesubtv9210 8 жыл бұрын
Evelyn Hi, I'm not sure really, Epsons can be used for sublimation but I don't know about that model, have a look online you may find some! You would have to look at flushing it out as well before putting the sublimation carts in the printer.
@Evelyn-si5jj 8 жыл бұрын
Which one do you recommend? Under $200 :D
@simongreaves210 4 жыл бұрын
Can you not just cooler-peel?
@homeusecomputers3697 8 жыл бұрын
Were is the link for the temp plate ?
@dyesubtv9210 8 жыл бұрын
+Home Use Computers If you send an email to adam@dyesublimationsupplies.co.uk we will email it over, for some reason the link keeps dropping off!
@willybandz8539 6 жыл бұрын
How do you print on styrofoam cups?
@dyesubtv9210 6 жыл бұрын
Hi, Styrofoam cups are commonly printed using a silk screen printing method.
@sophielouise2176 6 жыл бұрын
Hi do u use sublimation cups?
@dyesubtv9210 6 жыл бұрын
yes these are sublimation mugs
@steveos111 5 жыл бұрын
So i can just use normal ink and normal paper? AWESOME! :-)
@greggbell 4 жыл бұрын
How about a template for 15 oz mug. 11 oz is like shot of espresso...=)
@18Janeen 3 жыл бұрын
Just size it to the mug you are using. Resizing is simple within whatever program you are using
@mycreatiolove8423 6 жыл бұрын
What type of paper do you use?
@dyesubtv9210 6 жыл бұрын
i tend to use S-race paper cut to mug size
@mycreatiolove8423 6 жыл бұрын
Thanks but where would I purchase that from?
@dyesubtv9210 6 жыл бұрын
www.dyesublimationsupplies.co.uk/products.php?product=S%252dRace-Pre%252dCut-Sublimation-Mug-Paper
@Ghostfanofurs 5 жыл бұрын
Obviously unless you are prepared to Buy everything Sublimated in order to go this route, it will cost you alot. Sub mugs, sub printer, sub ink, sub paper. Aughh
@wickedwinnie 3 жыл бұрын
geez that constant beeping is ANNOYING, can it be silenced?
@tblazinztip 7 жыл бұрын
Why is the subject 'how to' when it's already a sublimation mug!!!