How to Sublimate on Wood using Polygloss and White Paint

Рет қаралды 9,810

2 жыл бұрын

How to Sublimate on Wood using Polygloss and White Paint
In this tutorial video, I will be demonstrating how to sublimate on wood using polygloss and white paint.
With the PloyGloss solution and white paint mixed together, you can create your own sublimation wood blank and decorate any piece of wood for your projects.
I will be going through this process step by step and if followed exactly, you will have that wonderful finishing product on your wood.
Get your Polygloss here - bit.ly/3CYZqu1
White primer paint - amzn.to/2VZRPu5
Paint Brush - amzn.to/3g71SFa
Varathane Polyurethane Water Based - amzn.to/3z5iEMt
Helmsman Water Based - amzn.to/3sjw1WG
Water-Based Polycrylic Spray - amzn.to/37LpE4T
Rust-Oleum 2X Gloss Clear - amzn.to/3xQeLtf
Silicone Mats - amzn.to/3mf6m02
Amazon Links:
Use my Amazon affiliate links below for shopping.
Silhouette White Cameo 4 - amzn.to/3rO3Uxx
A-Sub Sublimation Paper - amzn.to/2OWARJW
Printers Jack Sublimation Ink - amzn.to/3cp1OOk
Sublimation Keychains Blanks - amzn.to/3thJ6ij
Transfer Tape for Vinyl - amzn.to/2ONvFI6
Joyinland Heat Transfer Vinyl 12'' x 20feet - amzn.to/2OsPLYc
Round Sublimation Rubber Coasters - amzn.to/3wp5d8c
Hiipoo Sublimation Ink - amzn.to/3syHsco
Round Subimation Coaster - amzn.to/35Es9oI
Heat Resistant Tape - amzn.to/3xuctQw
Blank sublimation metal name card - amzn.to/3gIYIXD
Other videos you may be insterested in
How to coat on stanless steel with polygloss - • Coating Stainless Stee...
Watch how I coat on Ceramic Items - www.youtube.com/watch?v=U-ymH...
Sublimation on 100& polyester - • Sublimation Printing o...
Sulimating on Ceramic Plate - • Sublimation Printing o...
Sublimating onto a tile - • Sublimating on Ceramic...
🔴 Subscribe for more free KZfaq videos: kzfaq.info/love/hQT...
🔴 If this content brought any value or impacted you please like and share this video.
🔴 Leave your comments below if you have tips, questions, or would love me to do another video.
============================================================
Social Media:
▶️ Instagram: / allan21thom. .
▶️ Facebook Business Page: / allan21thompson
▶️ Email: atprints47@gmail.com
If you would love to Contribution and help support the channel send to:
Paypal: www.paypal.me/pianoboy21
FTC Legal Disclaimer - Some links found in the description box of my videos may be affiliate links. This will not cost you extra to use my links/codes. This is another way to support me and my channel.
Thanks.

Пікірлер: 77

@atprints 2 жыл бұрын

Make sure to check out how I sublimate on socks 👉👉 kzfaq.info/get/bejne/bc14oJhoqdzQh5c.html

@angiwilliamson2707 Ай бұрын

Did you mean Socks or Rock

@GlenworthJosephWORD 2 жыл бұрын

What an awesome job. I don't do any of that stuff but I was impressed. I just want to say to all those who will benefit from this that I hope you find it in your heart to send this guy a donation for all the hard work he does that you benefit from. Keep up the great work AT Prints.

@mutedmutt 2 жыл бұрын

Thank you!! I love how grateful and down to earth you are!!

@atprints 2 жыл бұрын

You are most welcome. I enjoy doing these videos to help as much as possible. Thanks so much for your support.

@MakingwithMarilyn 2 жыл бұрын

Thank you for such a thorough review of this product! Great video.

@atprints 2 жыл бұрын

Your are most welcome and I’m happy the video could help you.

@sundarmann6167 Жыл бұрын

Great work Alan!

@atprints Жыл бұрын

Thanks very much

@jalisaclarke5086 2 жыл бұрын

Wowwww!!! 🔥 🔥 I love the finished product. This is very innovative and creative and I know people will indeed get a wealth of knowledge from this tutorial video.

@atprints 2 жыл бұрын

Thanks very much for your kind words and I am happy you could also get that wealth of knowledge.

@gertrudecharles 2 жыл бұрын

Awwsome

@atprints 2 жыл бұрын

💪💪💪

@jordanlotus188 2 жыл бұрын

Grate work nice video. Please go on making more such video.

@atprints 2 жыл бұрын

Thanks very much. Make sure to stay connected as I do have more coming

@thatonegamer2709 Жыл бұрын

I had been looking for something this forever!!! Amazing so glad i found your vids.👍

@atprints Жыл бұрын

You are most welcome and I am happy that you got value from the videos.

@osedura1 2 жыл бұрын

you are great !!!!!!

@atprints 2 жыл бұрын

Thanks very much. I appreciate it

@jeremylawson6648 Жыл бұрын

i see other black ppl sublimating i subscribe, thanks for sharing the game bro.

@atprints Жыл бұрын

Thanks very much for your support.

@teezthatpleez6873 2 жыл бұрын

Awesome! Just an Fyi, if you don't have Polygloss or don't want to wait for the drying process, you can always just heat press thermal laminate onto the wood then sublimate it. Looks great too!

@atprints 2 жыл бұрын

👍

@akloaiza 8 ай бұрын

I was wondering if that could be done too

@lij-alchemistsjoy6400 Жыл бұрын

Hello Allan, thank you for this video tutorial. Have you tried heat pressing a laminating sheet on the paint and then sublimating the image ? I am about to try that based on another tutorial but would like to hear how you do it.

@atprints Жыл бұрын

Thanks for your comment and question. So I honestly never tried the laminating process before. I've seen others use the process but I wonder how long the colors etc stand up. I am also wondering if it is wise to paint the wood and then laminate as you wouldn't want the heat to wake up the paint and allow it to come off. I believe it will come down to temperatures and timing. Did you get to try this process yet?

@stormnation6387 Жыл бұрын

Allans right, you cannot paint then laminate as the laminate will not adhere to the wood through the paint, however if you have pre-laminated wood ( ie formica ) you can laminate then print on that but you can also risk discolouring the white to a tarnished yellow.

@stormnation6387 Жыл бұрын

That was an awesome video Allan, I didn't care how long it was because it was a very precise informative video and well worth the credit to you. I have one question though, as this was done on natural ply... do you have any tips on prepping MDF as i've tried it and the white still becomes yellow due to the manmade fibres in the board. cheers buddy and keep up the good work. Storm.

@atprints Жыл бұрын

Thanks very much for your support, I appreciate it. In terms of reducing the yellow on the MDF, you will have to allow the Polygloss to dry on its own and then you can use the heat press to cure it. However, when curing it make sure you don't use too much pressure on the heat press. Make sure to use a silicone pad which will help. You can also press it in 10-second intervals and then lift up the press for 10 seconds and then back down for another 20 seconds. I hope this helps and let me know about the progress.

@stormnation6387 Жыл бұрын

@@atprints Thank you again

@LanceMcGrew 3 ай бұрын

Would a foam brush help remove the brush marks seen in your camera close-ups? Also, what do you use for brush clean-up or do you dispose after one use?

@atprints 3 ай бұрын

Thanks for your questions. If you are referring to the white lines after the image was pressed, this is actually because the wood isn’t fully flat so because of this when it was finished sublimated it produced those white lines. However, with the clear coating that would clean it up. To clean up your brush you can use water as it was mostly a water base paint or thinners. I hope this helps.

@jerseytalw 2 жыл бұрын

Loving your videos. Can you use colored paint?

@atprints 2 жыл бұрын

Thanks so much for your comment, for watching and also for your question. I never tried colored paint but what I will say is that if you are looking to print an image onto the wood you would have to make sure that the colored paint is a light color so when you sublimate onto the wood you will be able to see the image. I hope this answer helps and feel free to ask more questions.

@jalisaclarke5086 2 жыл бұрын

Question for you. If I already have a piece of wood that is painted with plain white paint and I wish to sublimate onto it, would you advise to apply a second coat of paint mixed with polygloss or should I be able to apply the polygloss and catalyst mixture two times and allow it to cure then sublimate ?

@atprints 2 жыл бұрын

Thanks for your question. In relation to your question, the latter part of the question is what I would advise which is mix the polygloss solution coat it, allow it to dry for 1-2 hours then apply a second coat and allow to dry for 1-2 hours and after you can sublimate onto the wood. I hope this helps. Happy sublimating 💪

@angiwilliamson2707 Ай бұрын

Thanks, are the finishes food safe.

@atprints Ай бұрын

Yes the polygloss is good safe but not dishwasher safe.

@Woodworks-zd7iw 2 жыл бұрын

does the first coat have to be mixed with pain, or can you paint then do 2 coats of polygloss?

@atprints 2 жыл бұрын

Thanks for your question. You can try that method, however l, remember with the polygloss mixed into the paint it gives it a strong life. I mean I do believe the way you want to do it would work having a white board and just pasting the polygloss and sublimating should work. But if you want my advise I would say mix it in the paint so it can be a strong solution. I know the process is long but your looking for longevity. Hope this answer helps.

@deenies8966 Жыл бұрын

Hi Allan, do you know why my black shows up as brown? I cant seem to fix this issue

@atprints Жыл бұрын

Thanks for your question. Well my question to you would be is it turning brown when you print it or after you sublimate it onto the wood? If it turns brown after you sublimate it onto the wood it means that you burnt it. If you sublimate it for to long or the temperature is to high or even to much pressure when not needed you can end up burning the image.

@kathybond5512 Жыл бұрын

Would this process with the paint work with stainless steel as well?

@atprints Жыл бұрын

Yes, it can, however, if you are referring to stainless steel drinking items, it would be great to use spray paint. Kindly see the link with a video I created where i refurbished 20oz tumblers - kzfaq.info/get/bejne/hNKRidOSzJnVeXU.html

@chenadupont1345 2 жыл бұрын

Like the accent!

@atprints 2 жыл бұрын

Thanks very much.

@dwaynejohnson7499 2 жыл бұрын

Is there a way i could get this mixture in a spray gun should incase you have many substrates to coat. I have seen another guy spray painting on youtube so am wondering if its the same mixture he is spraying

@atprints 2 жыл бұрын

Thanks for your question. Yes you can also do it in a spray gun.

@dwaynejohnson7499 2 жыл бұрын

@@atprints thanks ould you send the mixing proportion when doing this.

@atprints 2 жыл бұрын

@@dwaynejohnson7499 you can reach out to me on Instagram or Facebook all my links in the description and ill send some info I have.

@dwaynejohnson7499 2 жыл бұрын

@@atprints ok will do

@dwaynejohnson7499 2 жыл бұрын

@@atprints send you Instagram link please

@lesanderson2791 Жыл бұрын

Does this work for slate as well?

@atprints Жыл бұрын

Thanks for your question. If you are referring to a rock slates, yes this process can work.

@Volzzchic 2 жыл бұрын

Can acrylic paint be used in this process?

@atprints 2 жыл бұрын

To be honest i never tried that before but its worth the try. PolyGloss can work on anything basically but just remember if you are looking to sublimate the paint has to be a light color.

@andreadewitt5653 2 жыл бұрын

Is the poly gloss self leveling?

@atprints 2 жыл бұрын

Hi can you give some more clarity?

@andreadewitt5653 2 жыл бұрын

Will it show brush strokes or will it level out to a flat surface?

@atprints 2 жыл бұрын

@@andreadewitt5653 thanks for your question. Once you use the brush and you gently pass the brush with the polygloss over the wood it will level out. Make sure you don’t rush the process.

@yli9538 2 жыл бұрын

To ne honest what I think about this mug is that this is a sublimation blank mug. Exactly as the set I always bought for sublimation but i really hope this poly thing works that well.

@atprints 2 жыл бұрын

Thanks for your thoughts. However, I’m not sure if you got mixed up with the videos as this video was how to sublimate on wood using polygloss and white paint and not mugs. I have another video showing the process for coating polygloss onto mugs and plates.

@thespirituallifeofman7563 6 ай бұрын

Screen print on tiles send video

@atprints 6 ай бұрын

I am sorry but I don't have a video on screen printing.

@deanturner1865 8 ай бұрын

Iv set you a challenge to do it on rock slate please let me know if it works 💪

@atprints 7 ай бұрын

Challenge accepted. I just need to find some slates that aren't coated.

@deanturner1865 7 ай бұрын

It does work iv done it lol

@deanturner1865 8 ай бұрын

Have you tried this on normal slate 🤔🤔

@atprints 8 ай бұрын

Hi, Are you referring to rock slates?

@deanturner1865 8 ай бұрын

Yes rock slate the ones people buy ready sublimation on im sure there's a way of doing it yourself instead of paying silly money for them just knowing what paint they use 🤔🤔

@javeediqbal190 Жыл бұрын

What is the name of the catylist?

@atprints Жыл бұрын

The name is actually dyepress catalyst.

@javeediqbal190 Жыл бұрын

What is it's chemical name.

@atprints Жыл бұрын

@@javeediqbal190 The name of the chemical that is used is called dyepress polygloss and it comes with an added solution to it which is call dyepress catylist. CHeck out the website here to see it 👉bit.ly/3CYZqu1