HOW TO SUCCESSFULLY USE THE PROXXON BSG 220 DRILL SHARPENING MACHINE

Рет қаралды 5,856

Күн бұрын

In this video I show how how easy it is to use the Proxxon BSG 220 drill sharpening machine to sharpen twist drills to DIN standard.

Пікірлер: 25

@alessandroandrenacci2372 10 ай бұрын

Minute 3:08 - about the dial ... i used some white enamel to better see the lines ... it helps

@nobbysworkshop 10 ай бұрын

A good review as usual Steve. Very clear and detailed. This should help anyone who didn't understand the instructions. Cheers Nobby

@alessandroandrenacci2372 10 ай бұрын

Minute 7:43 - perhaps ten millimeters or eleven will not do any problems. What it's important is that - when reversing the drill to sharp the other side - that distance will remain always the same, and the drill will touch again the back metal, so the rear wheel ( the plastic one with divisions ) will remain "true", to get equal sides at the point of the drill ( and the point of the drill will remain "centered" ... )

@maxpacote 10 ай бұрын

Using this grinder properly is a project in itself.

@Stefan_Boerjesson 10 ай бұрын

I bought a PROXXON Mf 70, a micro mill, a few years ago. It was converted to CNC. However I exceeded the intermittence, not told any ware, and fried the motor winding. The Swedish agent sent me the wrong motor and it took 6 months to get the payment back. When returning the wrong motor to the agent PROXXON was contacted. 2 quick Emails and the shipment reached me containing the correct motor within 2 weeks. That's German precision! Looking at something intended to be a cooling fan it's obvious that the designer had no knowledge at all regarding air flow. Loosing patience in creating a proper cooling the MF70 has only been connecting dust. Go for better, more solid tools then PROXXON. Sorry, not looking at the entire video. It started telling the back side I already experienced.

@SteveJordan 9 ай бұрын

SOME EXCELLENT VEVOR MUST HAVE DIY TOOLS:- shareasale.com/r.cfm?b=2348661&u=3715355&m=95592&urllink=&afftrack= VEVOR US FALL YARD CLEAN-UP & FOOD PREP SALE:- shareasale.com/r.cfm?b=2436181&u=3715355&m=95592&urllink=&afftrack=

@user-kw2bo5wp6o 10 ай бұрын

Thank you so much I love your content its so educational and interesting

@65cj55 10 ай бұрын

Very Handy, and a good instructional video.

@rickywoodcock7222 10 ай бұрын

Thanks Steve

@nerddub 10 ай бұрын

a smaller knob on that guide clamping screw could mean you could use less than 10mm stickout in the back, and then seat that drill guide against the face of that lower clamping block

@cbttrainer 10 ай бұрын

The dial was spinning all over as you sharpened the drill.

@SteveJordan 10 ай бұрын

Yes I know I will sort that out. It still came in at the same point, though. I just couldn't be bothered to film it again.

@rafaelsuarez7415 9 ай бұрын

Please , whats the smallest diameter drill it will "practicly" sharpen ?

@SteveJordan 9 ай бұрын

I think it will do any size, but with the smaller ones, you will need the Proxxon small dia drill adapter set. You can buy this set on eBay.

@guye7763 10 ай бұрын

If I had that fangled contraption it would be on Ebay too! The Vevor collet machine leaves this for dead, in ease of use and accuracy.

@SteveJordan 10 ай бұрын

Hi Yes, I was going to try one of those when they are sold by Vevor in the UK. They look excellent.

@matthewhibbs9602 10 ай бұрын

Totally agree, I have the proxxon drill sharpener also and because you have to flip the drill over it is very difficult to keep your grinds perfectly centred. I bought myself the vevor grinder in the end which really is worth every penny. The proxxon is gathering dust.

@SteveJordan 10 ай бұрын

I have found that the Proxxon has a perfect grind every time. However, I will get the Vevor one to try as soon as it becomes available at Vevor UK. The Vevor one looks excellent.

@alessandroandrenacci2372 10 ай бұрын

Minute 12:20 - too much forward, unless your drill has missing pieces ... half turn of the back wheel should be ok. Also the motor has very low power, and too much work can damage it ... moreover you have then to rotate all the sistem, an so the motor will work much more ...

@berniejanssen2863 10 ай бұрын

Doesn't seam like you ran the drill thru the sharphening until the wheel was finished grinding the first face of the bit. Shouldn't you keep grinding until the wheel stops grinding.

@SteveJordan 9 ай бұрын

Hi, yes, I did that. Regards, Steve