Hi Steve. I have stripped down a dc motor off of a wobble machine. I can get the anti vibration washers back between the housing and bearing. Ant ideas?
@Md.HabulKha3 күн бұрын
দাম কত
@rabidcougar64654 күн бұрын
Easy to make? I'm sure everyone has a metal drilling lathe in their garage and the other equipment you are using. What a joke, LOL!
@slakjawnotsayin54515 күн бұрын
The DLM is too weak to run a treadmill motor properly. It works, but it hums and is only good for light duty sanders or similar projects, not anything that requires much force. You can pop it open and turn the potentiometer up to get closer to the listed values, but it's not going to be the same as the original treadmill guts unfortunately. I never bothered, because I wanted to try the original power supply to see what the difference was, and it was huge! I really couldn't see that DLM box working much better because of it's physical size alone. So I'll use it for something else down the road I'm sure... But it does work for sure, just depends on what you want to use it for. I used mine on an old beast of a lathe with double cone pulleys and a leather flat belt, and the DLM was humming and would only make that motor run on there at about 20% compared to hooking it up using the original power supply and controls for the treadmill. The original made no overworking and struggling humming sounds at all, and it spun that thing way faster than it was supposed to spin I'm pretty sure! Both struggled with the initial starting and spinning, but that lathe is over 100 years old and HUGE, which had a big 220v motor on it, but I can't read and into off of it unfortunatly, and I can't even find any info online about it... Anyway, I just wanted to let people know that I tried the DLM box from the video, and it worked, but only at a fraction of what the original treadmill could do with that 2hp motor of mine!
@Hazzy2388 күн бұрын
Been awhile Steve since your last video. I really enjoy them and learn from them. Keep 'em coming. Thanks Bro.
@mark4lev9 күн бұрын
Is that an ml7 ?
@MAGATRON-DESTROY10 күн бұрын
If you dont have a lathe you can use silver solder to braze the original hose barbs to new correct size fittings or what I did is make a T fitting with 2 regular size hose barbs and a small hose barb for the hand torch but I'm a glassblower so I use a bench torch at the same time
@Dylon198112 күн бұрын
I think that electric screw driver was designed for electronics screw.
@raymonddahlberg12 күн бұрын
How can I get more torqe on the low speed? I just cant understand the parameter in the manual. If I adjust P72 the motor get a bad noise
@Derekmurrin-zt1xe12 күн бұрын
Very informative video... Quite knowledgeable individual!
@michaelford370513 күн бұрын
Great project and have two questions- Why did you slit the mandrel before you cut the taper and why did you use brass for the expander?
@mattsan7013 күн бұрын
Steve, which grit number for the Satene Abrasive Compound would you suggest for say brass polishing? I really have no idea . thanks
@mohdzubair883718 күн бұрын
Kya price he is pump ka
@RonithCastro20 күн бұрын
Thanks for the infos, bought this for 880 Philippine Pesos and it came today. Didn't know how to use it haha, the one in the manual are just basics. Didn't know what the torque is and how to put the things 😂😂😂
@colinmartin292120 күн бұрын
Great.
@inssan655021 күн бұрын
If it's not the chuck flexing it's the.... Chuck to spindle engagement Head stock bearings The extra mass of the bigger chuck should help, rather than hinder, if anything.
@jan.catrysse21 күн бұрын
Please buy the original genuine part. If you can't afford it, then buy a Dremel.
@jimsterling215622 күн бұрын
well done ! thank you for educating me sir.
@kandhorizon25 күн бұрын
ทำให้ลำบาก เพื่อ
@khozemapainter900726 күн бұрын
i want to buy where should i contact!
@AanKuswanna27 күн бұрын
Harga
@AanKuswanna27 күн бұрын
Harga
@KevoksssАй бұрын
Do you have the app? QR sends me to a website that does nothing. Looks like download link does not work
@normshafer2243Ай бұрын
Thank you Steve. Nicely done! Norm in Arizona
@MayLing-xh5rcАй бұрын
Put a peace of string through it, then you can ware it round your Neck, That Would be BANGGOOD 😂😂😂
@Donald-dh7rwАй бұрын
Let's see a Shed 🔥 Fire, That would be BANGGOOD 😂😂😂
@MayLing-xh5rcАй бұрын
When You have a shed fire, Can you Make a video of That, it will be BANGGOOD 😂😂😂
@MayLing-xh5rcАй бұрын
Its RUBBISH and won't Last Very Long 😂😂😂
@MayLing-xh5rcАй бұрын
Dont come back next YEAR 😂😂😂😂
@martytoal6547Ай бұрын
Well explained but I think I’d remove the Allen head and replace it with a bolt with a double thickness head, it would be easier to get a spanner on and keep the locking key engaged while tightening,
@gavinowen4776Ай бұрын
Can you tell me the model of the motor if you said it in the video I missed it
@femiakin-olugbade4141Ай бұрын
How can I change the plastic belt? Please advise.
@TKNolandАй бұрын
Tks so much. Your video is the most instructive on reassembly I've seen. The Setra is identical to the Sheridan Blue streak.
@gregh6794Ай бұрын
Awesome idea for the handle grub screw
@RustyInventions-wz6irАй бұрын
Very nice work sir
@tonedec1769Ай бұрын
Inherited a Myford A2 (ML4?) recently and could not work out what the backgear assembly was all about. Appreciate the explanation as it firmly knocks out one of the bigger questions I have about this lathe. Thank you.
@qwertyui90qwertyui90Ай бұрын
what rpm are you using when doing the ball turning ?
@MayLing-xh5rcАй бұрын
Steve used to work in Aerospace industry, But his job was Mopping out the Toilets and Sweeping The Floor. 😂😂😂
@MayLing-xh5rcАй бұрын
Do a Magic trick with it. Sit on it, then with a bit of luck, when you get up, it'll be GONE 😂😂😂
@TomBoyd-vw1wrАй бұрын
I was wondering if you sell them?
@OneWildTurkeyАй бұрын
One very important thing to remember is that ptfe tape is NOT a sealant. It's a lubricant. It just makes it easier to seat the different components that perform the sealing. Using too much tape can prevent getting a good seal.
@waleed312312Ай бұрын
So weak man
@davehimlin2374Ай бұрын
does it easily melt silver ?
@russlikely1137Ай бұрын
I got the wasabi one. I don’t know how much a difference it is, but I Shepard an old knife I found in the back of an old car pretty nasty looking chef knife. But boy you could cut.
@laurensjanse777Ай бұрын
Very straight forward review, for those who plan on buying one it's valuable content, much appreciated sir!
@maggiechildofgod974Ай бұрын
Much thanks for sharing!
@jimmaragos5225Ай бұрын
Its perfect. Just what i was looking for, and well thought out. Now on my way to make one for my mini lathe. Keep up the great work. I also noticed your indexing unit added to your chuck plate! It's a beautiful piece of work and design. Thank You!
@thelastgs-pian9965Ай бұрын
have you tried this method with boiled linseed oil , do these need to be repeated after every rainy season or do they last for years?
@coburnlowmanАй бұрын
👍. I've found that the newer vehicles that use the ultra thin motor oil works well as a cutting oil. Its free when changing your oil. Its nasty tho.