Enjoy the free mini! And come hang out during the Livestream where we'll support more minis, and you can ask any questions you have about the process, and I'll do my best to answer :) Wednesday May 26th, from 6pm - 8pm CST! www.twitch.tv/rybonator

I also apologize profusely for that intro. I hate it just as much as you all will... But I also love it haha :)

I am still midway through the video but I hope the support is love and caring XD

I don't even know why I watch every video you put up about making things? I don't have a 3d printer and don't play dnd in person anyway. Idk I just find your voice so calming, sometimes I fall asleep during your videos

This is going to be really useful in about 3 months time when I buy my resin printer (elagoo Mars 2) for my birthday! Thanks for the video and keep up the great content.

My boyfriend has been getting his as kicked by our elegoo printer. This is hopefully going to be super helpful for him.

Rybo...Dude! You are a godsend! This is one of the things I have really been struggling with since I got a printer. Thank you!

You have the best explanation of how resin printing works thanks

Watching this in 2024 with my Elegoo Saturn 4 Ultra getting into 3d printing for the first time

i dont have a 3-d printer. i have been buying mini, and i can respect them more understanding just how somethings can go wrong now. and i always enjoy learning something new

I can't thank you enough for this amazing tutorial. I had been avoiding printing things that required creating supports since getting my printer, but, man, this video sure did fix that hesitation. After watching, I went and created supports for a model that printed flawlessly. I had already watched a few videos on this topic prior, but none were as helpful as yours. Thanks again!

As someone who is still relatively new to SLA/ resin printing I can highly recommend prusa slicer, it has the best supports I have used with any slicer ever and it even lets you export your supported models as stls so you can import them for printers with their own proprietary slicers or formats

Ah the Ashborne map. I’d say simpler times but uhhh... yeah. Great video! Dice are awesome but I also enjoy your more technical kinda educational videos on other stuff like this.

THANK YOU. I have been searching for a tutorial in this forever!! Now I can feel moe confident supporting my own sculpture.

You, sir, are a lifesaver.

This was super helpful and made printing less scary

As of Nov. 2023 ive had very good results with auto supports actually , but this helps to fine tune

I use autosupport on 74% fill. It rarely takes me more than 5 minutes to find and support anything that was missed.

I don't have a 3D printer, but I see Rybonator, I watch.

Thank you🙂 Very informative.

Thank you for this video! This is usually the part of the process that I dread and yet the part that literally makes or breaks my prints. I can have a decent post-print process that makes a print look good, but I’ve practiced on my many failed prints to get a decent post-print process down. Looking forward to your next video on how to remove the supports since I’ve tried a few ways and they seem to leave some sort of marred surfaces that I just can’t fix.

Thank you very much for this video.

Alexei??? ALEXEI??? I have a character named Alexei! They're, uhh, less of an explosives character and more of a "allow me to introduce you to my lord and saviour, MY AXE TO YOUR FACE".

Your gloves look like exactly what i'm looking for. Are we getting info on them in the next video?

The only thing in this video that needed more support was the intro, not enough puns

isn't 6 sec way to much for the mars 2 ? The official chart says 2.5 sec with the standard resin.

just fyi the original supports were made on lychee slicer not chitubox, which is why they look so different.

Right in time!! My elegoo Mars 2 P came this weekend, i'm only printing pre supported models, the First time i tried to manual support i got my first resin failed...

Will you do a video on supporting rounded dice for 3d Prints?

4:21 haha, you said do-do

you should try lychee with the ability to brace and parent supports :)

Thanks from a total noob!

noot noot

Nice

Nutttt

Awsome

How do you add supports and then change the size of what you're printing? It always removes my supports when I try to but it's so much harder to navigate and add supports when I'm printing at 2 or 3 mm

Why there fkin isn't contact diameter setting on new chitubox version when you select contact shape as "none" but old versions have.

Ryb destop icon look awfully similarto my desktop icon

🔥❤👍

whats with the failed supports on the front of your print? I cant see where they fit in on the rigged stl file. did you print something else there and just merge the raft?

What a massive waste of material. Couldn't the supports be joined to a main support, which then branches off to smaller supports?

Amogus

Great video, except for the lack of puns in the beginning.