How To: Suzuki King Quad 300 Valve Adjustment

Рет қаралды 22,880

Күн бұрын

Hey Everyone, Adjusting the Valve's in my 97 King Quad 300. This should be pretty well the same for all years but double check on your own. To find TDC without using the "watch the piston" method and use the suzuki timing marks check out • How To: Suzuki King Qu... . and go to 13:30 roughly and you will see what you need to line up. Josh
Schneids15
Cummins
How To
Ski doo 1200
Nv4500
King Quad 300
600 SDI
Ski Doo
Share my Channel to help me grow and bring YOU better content:)
If you have anyone that you think would like my channel please share by copying and pasting the link below!
www.youtube.co...

Пікірлер: 50

@scottsellars6708 3 жыл бұрын

I use a compression gauge tube and add a balloon so you can find top on the compression. Way easier to figure it out.

@scottsellars6708 3 жыл бұрын

Keep up the King Quad Videos.

@Schneids15 3 жыл бұрын

That’s a good idea. I like watching it by myself with a light because i can see exactly when i am at overlap. Of course way easier to do off camera. Lol

@robert5109 3 жыл бұрын

Thanks always enjoy your King Quad 300 videos,very informative. Not many videos out there for this machine.

@ibkg 2 жыл бұрын

your videos helped me get a 95 model back up and running after sitting for over 2 years ty for making all these helpful videos

@patrykmocarski9955 3 жыл бұрын

wassup man. im really glad i found youre channel. im after buying one of this quads in rough shape for a project. and thatnks to you im learning a lot about them. thanks so much man

@Koivumaa94 3 жыл бұрын

Thanks very much for the video. I adjusted my quadrunner 250 and no more valve noises 🙂👍

@Schneids15 3 жыл бұрын

Awesome man! I am glad it helped!

@laudurobinet3480 3 жыл бұрын

Thanks for this vid! I got 2 quadrunner, and your videos alway help!

@leontaylor3572 Жыл бұрын

Thanks sir for making this video. You helped me tremendously.

@kenmelton473 3 жыл бұрын

your King Quad videos have been invaluable. Thank you from Wyoming!!!

@Schneids15 3 жыл бұрын

Hey ken! Glad i can help. Especially Wyoming. Would love to get there someday. Josh

@kenmelton473 3 жыл бұрын

@@Schneids15 let me know if you come this way. Be glad to show you around. Question. Some people have been swapping out their petcock out with a yamaha petcock to get away from the diaphram. do you think this would work?

@Schneids15 3 жыл бұрын

That would be great! I should have you shoot me an email. My email is in the about section of youtube. You could swap the petcock but honestly i just plug off the vacuum line at the carb and the petcock and use reserve or on and have never had an issue.

@kenmelton473 3 жыл бұрын

@@Schneids15 yes i have done that, cleaned the carb, checked the petcock, but it will only run good on prime. otherwise it dies after a few seconds and is hard to start.

@thomasaarup3648 4 ай бұрын

Thank you that helped me out

@thebrooklynprepper 3 жыл бұрын

Great just what I needed thank you

@meradu2 2 жыл бұрын

Nice work just got one for $350 it probably need this to Ty for the video 👍

@geckorre 3 жыл бұрын

Thanks again🙏

@amull9426 3 жыл бұрын

Thanks for vid. Nice info

@MegaPhilQc 8 ай бұрын

My quad is hard to start when cold i put choke start shut off like 5 sec after when give throttle die too and after like 1 min finish take gaz and run when hot start easy and run great

@keithcampbell3830 2 жыл бұрын

i like video on setting valves

@The_Warrior526 Жыл бұрын

Basically the first "repair" i did on mine was to replace the old cap o-rings.

@yewwtooob 2 жыл бұрын

An easier way is to stick your finger over the hole. When valves are both closed, the piston pressure will "pop" your finger off of the hole. If you have a buddy you don't really care for you can put the spark plug against the back of his hand to verify, hahaha

@laudurobinet3480 3 жыл бұрын

hi! I got a question about my quadrunner 300 1992. The front diff is making weird clicking noise sometime when I turn or push the 4 wheeler when its off. Even if the 4x4 is not engaged. I wonder what can cause that? bad oil? borken gear or something else? The 4x4 still work, but the diff lock i'm not shure.

@Schneids15 3 жыл бұрын

Are you sure it is coming from the diff? I would be looking at a CV Joint

@laudurobinet3480 3 жыл бұрын

@@Schneids15 oh yeah, probably à cv joint, one of them got à cv boot broken since I dont know when. Thanks!

@laudurobinet3480 3 жыл бұрын

@@Schneids15 are cv joint rebuildable? Or I need to change everything?

@Schneids15 3 жыл бұрын

You can rebuild them i think.... i have only replaced boots.

@MicahBurnett-sj5wi 2 ай бұрын

Question can it stops my four wheeler for bogging out when I'm in like 4 or 3 gear

@philbabin6315 3 жыл бұрын

Great as usual. Love the videos about the kingquad 300. Just aquired a 2000 Kingquad 300 with only 1928 KLM on it but seems like it is stuck in gear because I can't shift any of the levers. Any ideas. Thanks.

@Schneids15 3 жыл бұрын

Did you push down on the lever? There is a detent that requires you to push before shifting.

@philbabin6315 3 жыл бұрын

@@Schneids15 Yes I pushed down on the lever but still no movement.

@KcYukon Жыл бұрын

Man mine is being a pain starts one time doesnt start another time.. did a carb rebuild on it now it's like almost wants to start but doesn't so fires but just not enough to start almost like flooding.... I give up any ideas?? Could it be value clearance for hard starting?? Thanks in advance

@rgordon12354 Жыл бұрын

You think both being out of tolerance would cause a lack of power i have alot of trouble keeping speed on hills

@ericneering6357 10 ай бұрын

Why didn’t you tighten is 10 mm 12 m millimeter bolt

@adelaidogarcia9017 3 жыл бұрын

Need help hooking up fuel system on LT185 SUZUKI

@snapmantools Жыл бұрын

what would make exhaust glow red when you hold high idle?

@Schneids15 Жыл бұрын

Extremely lean condition.

@johnscribb6731 3 жыл бұрын

how do you see in there to adjust the front valve, I cant get my head in there to see it?

@keithcampbell3830 2 жыл бұрын

i have a poping noise when i give throttle is that valves or carb isue

@Schneids15 2 жыл бұрын

If run without intake on it will run lean and cause a popping.

@dougfairburn2037 2 жыл бұрын

thanks eh! now i know i did do it right...

@kgrant2317 Жыл бұрын

Mine is quite cold noisy hot

@GASSmallEngine Ай бұрын

Or you can buy the proper feeler gauges

@htc4sas 3 жыл бұрын

Hey, what is a valve clearance on king quad 300 99??

@Schneids15 3 жыл бұрын

Not sure off hand. I do say it in the video though.0

@htc4sas 3 жыл бұрын

But mine is 99 model. I think its different

@lanceolson4421 Жыл бұрын

Has anyone had their king quad have a very hard start,I mean like starter wines for a bit then will turn over,some times it will turn over a few times but very hard.replaced starter same thing,pull plug turns over fast put finger over plug hole and stops turning over,I’m lost

@Schneids15 Жыл бұрын

Sounds like your starter clutch is failing. Same thing happened to mine. The one way bearing your starter spins fails and causes this.