* VISUALLY EXPLAINED
For some FREE Printable Download help Leaflets: www.therepairspecialistonline...
Properly tensioning your chainsaw chain ensures that it operates safely and efficiently. An overly tight or loose chain can lead to poor cutting performance, increased wear on the chain and bar, and even safety hazards. Let's walk through the steps to correctly tension a chainsaw chain:
1. Safety First:
Before working on your chainsaw, ensure it's turned off, and the engine is cool.
Wear appropriate safety gear, including gloves and eye protection, to prevent injury.
2. Release the Chain Brake:
If your chainsaw has a chain brake, release it to allow the chain to rotate freely.
3. Chain Inspection:
Examine the chain for any visible damage or wear, such as damaged or missing teeth.
Check for loose or damaged drive links.
4. Tension Adjustment:
Locate the chain tensioning mechanism, which is typically a screw or knob located near the chainsaw's guide bar.
Loosen the tensioning mechanism to release the tension on the chain.
5. Bar and Chain Alignment:
Check the alignment of the guide bar and the chain. They should be in proper alignment with each other.
6. Proper Tension:
The chain should sit snugly against the guide bar without sagging or binding.
Tension the chain until you can gently pull the bottom of the chain away from the bar by using a gloved hand.
Ensure that the chain still moves freely along the bar when you manually rotate it by hand.
7. Test the Tension:
Rotate the chain around the bar to check for any tight spots. The chain should move smoothly without binding.
8. Tighten the Tensioning Mechanism:
Once you achieve the correct tension, use the tensioning mechanism to lock it in place.
Make sure it's secure, but avoid over-tightening, which can cause damage.
9. Check the Chain Brake:
Engage the chain brake to lock the chain in place when not in use. It should engage smoothly without any resistance.
10. Final Inspection:
- Double-check the chain tension and alignment after tightening the tensioning mechanism.
- Ensure that the chain still moves freely along the bar without any binding.
11. Lubrication:
- Don't forget to lubricate the chain with chain oil to ensure proper functioning and reduce friction during operation.
Conclusion:
Tensioning a chainsaw chain correctly is essential for safe and efficient cutting. Regularly inspect and adjust the chain tension to prevent excessive wear on the chain and guide bar, extend the life of your chainsaw, and enhance overall cutting performance. By following these steps and prioritizing safety, you can maintain your chainsaw in top working condition.
Many thanks indeed. Craig Kirkman (Owner and Creator of The Repair Specialist Channel)
Please check out my amazon shop. I have recommended some useful items from Amazon below. I guarantee you that these items are the sorts of things I use on a daily basis so I know they are good. I have to be careful in recommending products because I have my name and credibility at stake. So I will only recommend good products. www.amazon.co.uk/shop/therepa...
#ChainsawMaintenance
#ChainsawChain
#ChainsawSafety
#ProperTension
#ChainsawTips
#ChainsawCare
#GuideBarAlignment
#OutdoorEquipment
#ChainsawOperation
#ChainsawSafetyTips
#ChainsawMaintenanceGuide
#ToolMaintenance
#ChainsawSafetyGear
#SafeChainsawUse
#ChainsawTensioning
#DIYChainsawMaintenance
#ChainsawPerformance
#SafetyFirst
#ChainsawTechniques
#ChainsawLubrication