Perfect video! I just wanted to check new battery voltage before putting it in an old laptop to check if it was charging. The pin out observation alone was worth the video!

Genius, love your equipment.

great video. Just what i needed. Thanks a lot

great video! have you taken apart a laptop battery & replaced cells? or rebuilt a laptop battery pack? thanks

Indeed, that's the exact battery I have in my hand here. Thank you!

So if I wanted to check the voltage of my laptop battery, measure the resistance between the ground on the end, and other other pins, and any that are near zero are also grounds. Then connect any of those grounds to the ground on the end when measuring the voltage?

good analysis, sir

Hellow i have a question. Which spade conector do you use in order to fit indise the terminal of the battery?

Thx mate this was good and useful. Cheers 🍻

thnaks for the explanation to find the battery Ah...am impressed the way explained.... just wanted to ask out of curiosity, are we can use that "+ & -" two pins for reverse charging rather connecting 3rd/4th wires to the laptop battery?, becoz there will be BMS board present in the battery already... thanks in advance

Just found your channel. I really enjoy your detailed approach to electronic trouble shooting. Your mixture of "trial and error" with traditional troubleshooting makes for great videos. Thanks for sharing your knowledge.

Hi! I have done what you suggest at the video but no voltage appeared at multimeter. Do you have an idea why this is happening? Thank you very much!

I signed in just to say well done sir. Freaking the dude who posted better be earning six figs. Very clever.

hey,man.Could u plz tell me the things i need to build a breadboard like u do, I m a student and I wanna learn,and the necessary instrument if i wanna do better so that i can apply to the school to get them, Thank u!

Very good video. Thank you.

Very useful Thank you!

Thanks for a useful and informative video. You saved me some head scratching and wasted time.

very helpful..Thankyou !

Best of the best, very nice video: I use it for DIY 2in1 power bank for phone +battery for my ASUS laptop :) And it worked (15 min tested till now)

Thanks man!

Can you put the link for the circuit you built in the description? Thank you.

very nice thank you I did not understand the bit with the transistor though

Hi! Thanks for posting your video. I would like to ask you a query. My laptop battery was working fine till last night with a battery back up of 4 hr and suddenly today it has experienced a permanent failure. The laptop is not switching on with the battery, when i plugged in the charger it display "battery permanently failed". What will be the reason behind this ? Is there any way to repair my battery.

when charging a laptop battery externally should the jumper be in place for current to flow into the battery for charging?

Can this also be used to revive a battery that has fallen below the threshold for charging? I have an Asus laptop that sat for about a year and won't charge... can I short the pins and apply a constant current or voltage to bring it back?

Good stuff!

Thanks a lot my friend, I could make a laptop battery which was not charging to star charging with your explanation!! Thanks again for sharing

Help with Dell D600 battery: (C1295) With a jumper between Ground and the SYS PRESENT pin I can measure voltage and discharge the battery using a R/C charger /discharger. However I can not charge at the out most pins. If I put the battery back in the laptop it will charge it full again. Would you know if I need another jumper to allow the battery to accept charging?

Elmer Fudd in electronics. Good work and good info.

Hello I have a Dell laptop battery model J1KND 48w 11.1volt How can it be charged without a laptop? Which pins are negative and positive? Can its negative and positive pins be used as a power bank?

Great video. I followed your instructions to measure the voltage of my old Asus battery and it looks fine (this battery has lost a lot of its capacity but still works a little). My new battery suddenly stopped working. when i use your technique, it only measures 0v. any thoughts?

Very useful... Thanx 😇👌🏻

Hi sir, congrats for you neat project. I saw a similar solution in another video, and ever since I been looking for a more elaborated plan, and yours is perfect. Only a well centered mind can present an idea based on scientific principles. This video brings an important solution for a common problem, and it's very convenient from the ecological point of view. I will give a solid 10.

Hello .. I have a 15v 5900mah laptop battery, it is safe to use my laptop charger directly connected to my battery ? my charger out is 19v 9.23A.. or I need a step down DC-DC ?

where do you get those value? 0.5167 and 2.63

Thanks for sharing 💕you are awesome

Hi, thanks for your guide on finding right pin to enable workload. Is it possible to charge battery w/o laptop? How to find right pin for charging? Thanks

It works if the positive of the battery is placed directly? Jumping the switch

Hello! Can you help me with this battery. I have an Asus laptop and I left it by mistake to fully discharge . Now the battery won't work. I opened it all the elements are fine, total voltage 15.5V. But no voltage on connector. I tried making bridge from pin 3 an 4 to ground like in your video - still no voltage. What should I do? Thank you in advance! :)

this is a great vid with alot of useful stuff. thanks for posting. 0:53 lmao am i the only one who got scared of him spazzing out here?

Very informative video. Thanks mate

Thank you sir for this topic i knew

Hello Man You did a great job... I want to charge my laptop battery directly using the same laptop charger by not inserting battery in laptop. I found + and - terminal and connected charger + - terminal to battery but it is not charging. What else should I do? In this video you connected one more terminal to charge the battery. What is it? How to find it? Please help me ...

Thank you Sir

many thanks for the video

Hi, Great video ! It worked a treat on a pair of li ion batteries I had sitting around from two laptops . Thought I am having trouble with two li po batteries I have , I found the ground jumped that with the other ground but it does not give me a reading or let me charge it like it did with the li ion's , Any chance I can send you a pic , it is a battery for a Asus transformer tablet/laptop 2 in 1 , the batteries have 8 wires , two for pos red, two for neg/ground black , well three really because green is neg/ground as well , Then there is a yellow , white and blue , all coming out of battery . Any help would be appreciated

Hey, I liked the video. I have a question regarding the pins you are using to connect the laptop. where can i get them? Amazon link?

Thank you. I have seen many videos teaching that you only have to connect the battery out/input to a cherger to charge it, but it is a fake, because as you have shown here one have to active it.

Hi. Just want to say thank you very much for uploading all the videos you do.....because i do exactly this as an "hobby" at home all the time to keep my technology memory updated since it was about 15-16 years ago i went to the electric courses at school as a "youngster".(Also cause it is so damn fun with electronics ofcourse hehe) I´ve noticed you have the "Atten" hot air station.I do too and i wonder how do you like yours? Mine came grounded to the handle only wich in most cases would work but i modified mine and "upgraded" to better ground as the casing on the hot air station is made of metallic material. Cheers from Sweden

Hej Mads! Er super glad for dine informative og gode kvalitets videoer! Jeg fangede ikke helt hvordan du fandt plus og de to gange minus på det bærbar batteri. Og hvorfor er det to stel? I min verden burde der kun være, Stel + Celler dvs normalt 4 forbindelser til et standart 3S batteri.

Thanks very nice

Thx Buddy for information about the Ebay cheats

Very thanks man for your video, it saved my money for buying new battery, because i thought the battery is dead because i measured between + and - terminals only and there was no voltage. THX MAN!!

I watch this video every time I can't fall asleep.

How can i test the battery of HP envy laptop with 14 wires (6 black, 1 white, 1 green, 6 red) its a flat battery

Very informative..

does this trick work with Dell batteries?

thanks a lot

Hi guys, my laptop says my battery is damaged but I know it's not as i tried new one and new cable. Is there any way I can test motherboard with multimeter?

In order to find the second ground, why didn't you just touch one of the meter's probes to the GND pin, turn the multimeter dial to CONTINUITY, and go around touching all the other pins with the second probe?

I have a question to ask you, while you test a battery with a multi-meter.... if the number of voltage increase... then the battery is most likely good and if the number of voltage decrease then the battery is most likely bad. right?

Good video. Now a question. When a battery doesn't charge it is all the time the culprit? What about the ability of the laptop circuits to charge it? Can we test that?

*This battery reconditioning program exceeded my presumptions. It worked on any drill battery, several AA and AAA batteries, **batery.repair** and any camera battery. The steps are simple and the act itself is exciting to do. No matter what type of battery you`ve got, it is sure to function again!*

Very good wish I could build that device and I am after software that might do this too John

i dont understand why anyone would thumb this down, is it because there is no music, no explosions, no exaggerated silly faces in the thumbnail?

Remember that the capacity shown on batteries usually is noted at below 1C discharge rate and no higher. Higher discharge rates makes internal resistance come into play, and they then will not live up to specs.

Would you please tell me what is that small prob that you sticked between the battery leads? thank you.

can any of those equipement of yours do a pulsed discharge test and if there any what it called that equipement

Like the equipment.... UT61E Multimeter & Rigol Oscilloscope! 👊👍😁

If the battery power can run for about 2 hours then the battery is good and if the battery can run for 10 minutes then the battery is most likely bad. right? There are more than one way to test your batter to see if its good or bad. right?

no you were right. The transistor will allow 1 amp to pass through it. You just pointed at the resistor. The transistor being the active component and the resistor being the passive I wouldn't say the resistor is "allowing" anything.

+1 for constant current load project

that is good.thank you

thanks it worked, i could not find out the resistance of pins, it showed 0, so I used only wires to find the groud pin, battery didnt blow

I have a laptop that has to be turned off first before it begins to charge... If it's in use and you try to charge it it won't charge

First of all! Perfect video! Congratulations! I searched but didnt find the Howto of the circuit. Do you have one? Best regards! :)

How many voltage required for charge a laptop battery

Hw to recharge it without laptop

كم قدره البطاريه

Did he open beer at 8.13 ?? ;P

السلام عليكم.. شكرا اتاذ على دروسك الاكثر من رائعه .. عندي سؤال لو تكرمت .. عندي قرص الE فيه بيانات هامه فعند الرغبه بفتحه يطلب مني format ؟؟ اتمني المساعده اذا تكرمت .. نسرين من اليمن

i love this lecture but can see the cell buy is problem in my area may God help us

At 7:47, you mentioned that the "battery will cut off automatically". It seems it did cut off at 9.87v, that's about 3.29v per couple. Pretty safe for lithium cells. I wish to know did it cut off automatically because of the battery's internal circuit, or because of you custom made load circuit? If that cuts off because of it's internal circuit, that would save my efforts to add protection circuit and I could directly use laptop batteries in my electronic projects.

Is the best

My Battery is ok but voltage not coming at connector

Muito bom gostei , pena que não entendo muito sua linguá kkk mais valeu obrigado ..... ty

I didn't know that laptop batteries are controlled by an "ECU" almost the same as the fuel administration to the engine in a injected fuel type. Even though my battery was somewhat deteriorated after forgettting it on sleep mode without autoshutdown, it was still working 40 minutes or more, now it has locked by software, and the order to charge it is sent from the chip inside the battery, and if this chip decides to put the battery in protect mode, it will not allow the laptop battery module to put tension to the charging terminals. And the battery neither will unlock the positive terminal to supply off the grid. So now i have what it was a working battery locked by software. I can bridge the terminals but it would even be safer to use a power bank plug to the main DC input (19v). I don't wanna mess with the charging terminals of the laptop. This method didnt work for me, the battery ECU is bricked (i made a short circuit in the first pair of cells with a drill, drilling on the wrong spot.

Creeperguy55 My brother, the virtuous, the battery is stolen from me and I want to know only how the first battery is another Atari Valsokt to Vellab Top I want the numbers of the years to the South by the battery type and size Tani pure external battery What are the negative and positive parties to the top dog to bring them a battery with only two wires Thank you very much

Nic ❤

he got tazeddddddd

🎉

To test the voltage why don't you just stick a diode in the battery socket?

Dude, I cannot see what your wires are doing around 3:00.

Determine laptop power consumption. Use the laptop as dummy load.

Hi, It would have been still better if you show complete video of replacing cells in VGP-BPS22 battery, when Laptop shows message "0% available, (plugged in, charging)". And how to avoid BMS chip from “shutting down” or disabling if the cells are removed/changed and may even refuse to allow charge the cells after completing replacement of cells.

Audio continuity is much easier since with beaps it will give you an obvious rating. Great video tho !!!!!! :D

Hi. Maybe you should rename the title to help people find the video easier? It's Laptop for reference.

Who uses graph paper and doesn't stick to the lines?!

see later.

You kinda sound like a Dalek :D