Thank you so much, this is the only machine I found on Facebook that looked like mine. I could NOT for the life of me figure out how to get the green thread through the last three loops until I found your video. Green thread was about to be my thirteenth reason after 4 hours of trying

I wanna say thank you so much! Without your video I would have been so discouraged and threading this. I'm the type of person that's need a visual look. So again, thank so much!

Thank you! Instruction book didn't help me to thread the blue looper correctly--now, thanks to you, it works!

Thanks for the perfect video. I watch this every time I use my serger! Thanks for your help!

I am so glad I found your video. Now I can actually use my serger!❤

Thank you so much, your directions helped me so much! After waiting 10 months to opening the box this machine came in, only to find all the threads undone, I was able to rethread my machine....now...I am on to learning how to use a serger! Wish me luck!

Thank you! You saved me a trip to the repair shop!

Thank you so much for sharing! I was stuck at one section with the “green” thread, and you cleared it right up! I never would have thought of opening the other side. 😂 Thank you thank you!

Thank you so much! It’s that first thread that’s the kicker. I really appreciate it.

You have more faith in me then I do!! But you got me through it! Thank you!

Omg thank you! Super clear, perfect pace

After 5 other tutorials I could not make heads or tails of, I’d lost hope… then I found yours. My serger is successfully threaded again…. Thank YOU!!!!!!!!

Thank you so much, I have the manual and still was having trouble until I watched your video. Thank you, Amy from Moline, IL

Thank you so much!!! This has helped me tremendously since I purchased the machine at estate sale and don’t have a manual. Great job! 👏

Super helpful- you saved me! Thank you! (I love listening to you sing too!)

Thank you for this video ! I have only threaded my machine twice so far , I always pull up your video while I’m working it ❤ thank you !!!

Thank you sooo much. I usually try to tie off my threads but didn’t have a long enough start so I had to re-thread everything. That was so hard but was made a lot easier with your video.

Thank you!!!! This is an amazing tutorial!

I just want to share a tip... When threading the needles if you lick your finger and then wipe the back of the needle it seems to help thread the needle. But as she showed in the video you have to have smooth cut ends... Good video 😊

Thank you so much for this video - I couldn’t have done it without you!!!!

Thank you! You are amazing and I appreciate this video so, so much!

Thank you so much for putting this video!! It took me a while to thread, but I did it!!

This was super helpful! Thank you very much!

Thank you for such life saver! It’s greatly appreciated!

You have an incredible singing voice. Love it!

This was perfect, I could not have done it with out you!

You are my HERO! However, the chirping heard on your video sent my mother in law, brother in law and husband searching for the carbon monoxide detector with a dying battery which was hilarious because i kept saying it was the video. I just needed help threading the lower looper, and you're guidance saved my sanity!!! Thank you again!

thank you very much!!! im so excited to start serging now:)

I would recommend that you rehearse your video first. Iron out All The kinks and then record for good. I was very confused with all this going back and fixing this and going back and changing that and cutting the thread shorter and longer. I very much appreciate that you did this because yes it is very complicated but I'm sorry to say that I'm almost as confused as I was before I started

Thank you for your video. It's threaded.

Thank you!!!❤️🙏🏼 green is a pain in the back!!❤️

Thank you for this video. It helped me so much today.

hi thank u i am so inspired this vidio.... it really hellped me so much!!! like i used the instructions the first time to rethread and i somehow .... miraculously? got it to work..... but the part where u explain how to do the 2nd thread from behind that saved my life!!! i was so confused and frustrated before i was ready to give up!!! i subscribed and and will be forever watching what u put out!!! tthanks again

This saved my butt today, thank you!

Thank you, bless you and your baby!

This video saved me! Thank you!

Thank you so much!!!

Thanks so much!

Thanks so much! The manual isn't as clear with the graphics as your camera work is. I'm a very visual person, but couldn't figure it out until I found your video. Much appreciated.

Life saver thank you

Thank you so much for this I went from😢 to 😊.

How do you like the Janine 8933? I am considering one as my first serger.

I thread the first thread (turq color) just like you say and it still keeps breaking The hardest one...green

i am stuck with the blue thread, can you zoom in closer so i can see exactly where your placing the thread

Thank you! I finally got it threaded. I guess I need to set my tension because my right thread keeps breaking. I have it set as 3, 3, 3, 3...side knobs top 3 bottom 1??

Thanks a million!

Can you do tutorial of Stirling Overlock

Sorry if it's not the best footage! I am so happy to see that so many of you find it useful!!!!

Thank you..

Stumbled across video after trying 5 unsuccessful hours to get my machine re-threaded! The video is extremely helpful with the green thread, which I thought was my issue 😒 sadly, my machine is not making chains. What have I done wrong or what am I missing?

OMG! I got rid of my viking husquavarna 936 because I wanted a machine where I didn't need surgical tools and a degree in engineering to thread. THIS was the wrong machine for me. I wish I would've watched your video BEFORE I bought the machine. Thankfully, amazon takes returns.

How do u like it I was thinking of returning my brother sdx for this one the brother is so big and bulky and this one is nicer looking the brother feet are so hard to change that’s what really makes me want to return it

If your lower looper thread doesn't lay on top of upper looper thread it won't work.

I need help!!! My thread keeps breaking at the needles.

mi green point tread keeps on breaking!!!

Oooommmmggggg😬

Please change your smoke detector battery

Playing the first half several times I was able to thread. But for another time concentrate on threading the first thread - the rest are pretty straight forward. Voice needs to be clearer without background noise. Hands shouldn’t be blocking what you are doing but how you solve, I don’t know.

You're too far. I can't see anything 😭