HOW TO TIGHTEN AN AUGER BELT ON A CRAFTSMAN MTD OR CUB CADET SNOWBLOWER TO THROW FARTHER
Рет қаралды 13,830
Күн бұрын#garagegear #craftsman #snowblower
HOW TO TIGHTEN AN AUGER BELT ON A CRAFTSMAN MTD OR CUB CADET SNOWBLOWER TO THROW FARTHER. Don't know how to TIGHTEN the AUGER BELT on your SNOWBLOWER? Watch and see how I CHECK and ADJUST my CRAFTSMAN Snowblower AUGER BELT PROPERLY with these easy STEP-BY-STEP INSTRUCTIONS. I show you how to properly adjust it THE RIGHT WAY so you can make your snowblower throw farther! But will your auger LEVER be TOO TIGHT? LIKE and SUBSCRIBE!!!
CONTACT INFO:
EMAIL: garagegearjb@gmail.com
INSTAGRAM: garagegearjb
SUPPORT THE CHANNEL or help me take the GARAGE GAL out to dinner!
paypal.me/garagegear?country....
GARAGE GEAR AMAZON STORE
www.amazon.com/shop/garagegear
Thank you for supporting the channel!
SNOWBLOWER SCHOOL - RUSTPROOFING COURSE OPTIONS:
1.Amazon Storefront:
See pinned list labeled - SNOWBLOWER SCHOOL RUSTPROOFING
www.amazon.com/shop/garagegea...
2.Etsy:
www.etsy.com/listing/15789027...
3.Email garagegearjb@gmail.com to purchase a PDF file of the Rustproofing Your Snowblower Course. An invoice will be sent to you via email. When you receive the invoice, you will be required to PayPal $9.99 to garagegearjb@gmail.com. Please include your email and name in the comments section. You will receive the PDF in your email within 24 hours after payment is received.
Thank you supporting Garage Gear!
WATCH THESE NEXT:
HOW TO CHANGE SNOWBLOWER AUGER BELTS - FAST & EASY Replacement and Installation • HOW TO CHANGE SNOWBLOW...
HOW TO REPLACE AUGER & DRIVE BELTS ON A SNOWBLOWER FOR BEGINNERS • HOW TO REPLACE AUGER &...
HOW TO LUBRICATE AN AUGER GEARBOX ON A CRAFTSMAN, MTD OR CUB CADET SNOWBLOWER (Without A Drain Plug) • HOW TO LUBRICATE AN AU...
HOW TO ADJUST SKID SHOES ON A SNOWBLOWER (Save A Scraper Blade) • HOW TO ADJUST SKID SHO...
HOW TO DO AN OIL CHANGE ON A CRAFTSMAN SNOWBLOWER (Ever Changed Before?) • HOW TO DO AN OIL CHANG...
HOW TO START A CRAFTSMAN SNOWBLOWER FOR BEGINNERS (Cold Start, Restart & Electric Start) • HOW TO START A CRAFTSM...
BEFORE YOU BUY AN ARIENS PROFESSIONAL 28 INCH SNOWBLOWER, WATCH THIS! (Better Than A 32"?) • BEFORE YOU BUY AN ARIE...
PRODUCT LINKS:
Craftsman 24" Snowblower Auger Belt (Ensure fit prior to purchase) amzn.to/3O63mAl
Craftsman 24” 208cc Snowblower amzn.to/3MOfpl9
Pittsburgh 225 Piece Socket Set amzn.to/4bbkvTp
Ariens Professional 28" Snowblower amzn.to/46iGt2P
Ariens Professional 32” Snowblower amzn.to/3Qn5KEs
Fluid Film amzn.to/3C0fvRg
Blaster Surface Shield amzn.to/3S3Xrym
Liquid Wrench Silicone Spray amzn.to/3GeTaly
Liquid Wrench Rust Inhibitor amzn.to/3JL0iFL
WD-40 amzn.to/3yUxRS9
Ariens Snowblower Mat amzn.to/3CxhsmF
36" x 72" Snowblower Mat amzn.to/30E94nP
Weather Tech Snowblower Mat amzn.to/3LfQbsQ
Ariens Deluxe 24" Snowblower amzn.to/3qT1Gzq
Ariens Compact 24" amzn.to/3qYrcDp
Ariens Deluxe 28" Snowblower amzn.to/3CMOKO1
Pivoting Workbench Dock Light amzn.to/3wCa1ur
Gladiator Workbench amzn.to/3osnsbb
Gladiator Cabinets amzn.to/3sk6cWF
Gladiator Floor Cabinet amzn.to/3sfhGuQ
JB and Garage Gear do not own the rights to the additional photos and clips used in this video.
Disclaimer:
Due to factors beyond the control of Garage Gear, I cannot guarantee against improper use or unauthorized modifications of this information. Garage Gear assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Garage Gear recommends safe practices when working on machines and or with tools seen or implied in this video. Due to factors beyond the control of Garage Gear, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Garage Gear.
JB from Garage Gear is a member of the Amazon Affiliate Program and may receive a commissions on select purchases. These commissions do not influence the prices you pay on Amazon. Thank You for supporting Garage Gear!
@GarageGear 5 ай бұрын
Here is a LINK to the CRAFTSMAN AUGER BELT used in this video. Be sure to Ensure Fit prior to purchase. Thank you for supporting the channel! 👍 👉amzn.to/3O63mAl
@PainterD54 Ай бұрын
And it's a good idea to notice the gap between the impeller and the housing. Time to install an impeller kit too! That will get you some distance with your snow throwing!
@GarageGear Ай бұрын
I’ll be doing that on this craftsman once we get some snow next winter!
@yalerich7417 5 ай бұрын
I've still got a 90's computer (Lol). Now I can say I've tightened my belt-up a notch!
@GarageGear 5 ай бұрын
Rock on! Go Bills!
@gjordan8800 5 ай бұрын
I finally had a chance to adjust the auger pulley now I have to wait for the snow to see how it works thanks for the great video!🙏👍
@GarageGear 5 ай бұрын
You got it gjordan! Youre ready for the next storm!
@mikemontagne2703 5 ай бұрын
JB, is it a coincidence? Yesterday morning, after yet another 6 inch or so of "White Blight". I started up my 24 "Troy Bilt 3 stage to go out and clear away all that fall out. As always, it started just fine, it's one notable feature, the 3rd front impeller(no longer?) is nearly N.F.G. . Anyhow, about 25 down the side of my house, the auger handle suddenly goes slack, and the auger stops throwing. ####en, piece of ###, explicit(s)..... So, nearly 3 hours of hands-on work, and most thankfully, our City's snow plow, was busy elsewhere, Not the usual, just after clearing my driveway, plow berm to have to ,again clear away :)! So, when I had the time to inspect the auger mechanism, to see what malfunctioned, dreading a broken auger drive belt. Turns out to have been an accumulated ice/snow, had dropped down from the inside of that black plastic cover jamming the whole works. Oh, thank you G*d, an easy fix. The morning before, we'd had a dump of snow, and I'd helped my New Canadian neighbor next door clear away the plow berm infront of his driveway, and I hadn't throughly cleaned up my machine. The mechanism on the your snow blower is identical to my Troy Bilt, go figure (?)...
@GarageGear 5 ай бұрын
Glad it was an easy fix and this video ironically came out today! Great timing. That is quite a story. Lol I’m glad it’s all good now. Now you can enjoy the weekend.
@karleriklund428 5 ай бұрын
Cheers from Norway, I am replacing the auger belt on a similar blower. But it jumped off twice🥶. I see that those machines do not have a pin on the outside of the belt on the top wheels? Maybe I should bend some pins and attach with bolts and nuts💪 funny thing is that it seemed to jump off during blowing, that means with full pressure on the belt. Jumped off on the big lowest wheel. Bend som pins around that too maybe 😂. Love your videos 😀
@GarageGear 5 ай бұрын
Thanks for following along. Love the positive feedback! Glad you’re following from Norway too! Yeah, that could work.
@jazzcat7300 5 ай бұрын
We almost got 3 feet of snow in N.W. Indiana. I just got my Ariens snow throw just in time. That is a awesome machine.
@GarageGear 5 ай бұрын
It for sure is! It will tackle that 3 feet without a problem!
@jazzcat7300 5 ай бұрын
KING OF SNOW.@@GarageGear
@robertclifford1423 5 ай бұрын
I'd like to point out that when you do this fix, pull on the impeller belt a little to see if the impeller pulley is loose. I sent my Toro 924 to two different repair shops for a loose belt, and they tightened it like in this video. Unfortunately, it was NOT the belt that was causing the problem, it was the auger bearing. The auger bearing had ground itself down to almost nothing, causing the same problem of not throwing snow very far and getting clogged in wet snow. The repair/replacement is fairly easy if you have the tools and the knowhow. Took me a few hours and considering the machine is 22 years old I am happy it's working right again.
@gjordan8800 5 ай бұрын
I did mine was fine thanks for the heads up👍
@GarageGear 5 ай бұрын
Thanks for the heads up robert!
@oldrustycars 5 ай бұрын
At 3:49 is the first rule of mechanics: When you need a hammer, anything within reach becomes one.
@GarageGear 5 ай бұрын
💯agree!
@swampyankee72 5 ай бұрын
JB, a tip to make it easier to adjust. Once the bolts removed, take a Dremel and grind down the hump, making two holes into one continuous slot instead of two holes. Repaint to avoid rust, let dry, reassemble. Easy peasy.
@GarageGear 5 ай бұрын
Good tip Yankee! Thanks for sharing bud
@f62darkstar 5 ай бұрын
you could also take a Dremel and open up that slot so the bolt will slide in the opening...then next time you won't have to take the bolt out....just lossen....slide....tighten.
@GarageGear 5 ай бұрын
Great Tip my friend! Like where you head is at!
@saigyl9149 5 ай бұрын
I just had to fix the tension for my auger, but mine was designed better and all i had to do was tighten the cable right under the lever
@GarageGear 5 ай бұрын
Some of these models are a little different.! Thanks for sharing
@garydunnjr8176 5 ай бұрын
lol craftsman’s user manual…its a joke! Thank you again for this series on the craftsman snowblowers!
@GarageGear 5 ай бұрын
Children’s story books give more info than that manual lol! Have an awesome weekend Gary! Go BILLS!
@craigweinstein4272 5 ай бұрын
Another great and timely video JB!! Thank you so much again for your step by step instructions that are very easy to follow
@GarageGear 5 ай бұрын
You got it Craig! Thanks for watching!
@gjordan8800 4 ай бұрын
Update still waiting for the snow so I can try the newey adjusted auger pulley 😊
@GarageGear 4 ай бұрын
Hopefully we get some more! We will see gjordan! 👍
@jaybooth4815 5 ай бұрын
Great video as usual JB! Everything is always explained and shown in detail. With a joke or two…haha. I’m sure you got plenty of use on that beast this past week! GO BILLS!
@GarageGear 5 ай бұрын
Oh for sure! Feels like we are in a snow globe this week ha! Enjoy the game, Jay!
@jaybooth4815 5 ай бұрын
That's an understatement JB!
@paulmysliborski4832 5 ай бұрын
Yeah, those MTD tensioner brackets suck. That’s why I spent a couple of hours one summer day a few years back modifying mine. I removed the bolt and pulley, and drilled another hole past the inside hole, then used a die grinder and files to create a nice little 1-1/2” slot. Now I don’t have to fight with it to adjust the belt tension. Why MTD doesn’t do this is beyond me. Another kick-ass vid, JB!!
@GarageGear 5 ай бұрын
That’s a brilliant idea, Paul! Can I hire you for more tips like this? Hope The weekend is treating you well!
@paulmysliborski4832 5 ай бұрын
@@GarageGear Two six packs and a sandwich, and I accept the job! 🤣🤣
@GarageGear 5 ай бұрын
@@paulmysliborski4832 deal!
@gjordan8800 5 ай бұрын
Great video! I have changed my belt a couple of times with no results I thought it was odd there was no way to really adjust the belt the auger tensioner was no help so with that being said I just want to thank you very much!
@GarageGear 5 ай бұрын
ROCK ON Jordan! Thanks for watching my friend!
@Rebel9668 5 ай бұрын
We got a few inches of snow yesterday so I got to try out my Ariens 10M4. I discovered I'm too tall to run the machine comfortably, lol, or the handles are too short. Being 6'8" sucks a lot of the time though, so I'm not really surprised, I'll just make it work like I always do. I know why the gear box was dry now, lol. Seals leak. This spring will take the whole front end apart and repack the bearings and get new seals, etc. and will also drive that broken bolt out of the auger (it still turns with the axle somehow) with heat as now it even laughed at the Ingersol Rand air hammer punch I tried on it. It does throw the snow though, there's no doubt about that. :)
@GarageGear 5 ай бұрын
Hey rebel you’re a tall one! Maybe consider welding on taller handlebars?🤷♂️ good idea to work on it in the summer time!
@The_Mace 5 ай бұрын
For a quick second JB, I was really wondering where you were going with the "It was floppier than a..." joke.... 🤣
@GarageGear 5 ай бұрын
Originally went another route but the KZfaq overlords said ,”No”! Had to keep it PG! Lol! Next go around though… I ain’t holding back! Have an awesome weekend bud!
@dougweir441 5 ай бұрын
Another great video. Haven't been using the Toro much this winter. We have only received about 10" total this winter in N.W. Iowa. Not going to complain.
@GarageGear 5 ай бұрын
Appreciate you doug! Some areas seem to be a little out of sync with winter this season. 🤷♂️
@gjordan8800 4 ай бұрын
Update that damn groundhog I guess I am not going to get any snow to try out the newly adjusted all the belt😂😂😂
@GarageGear 4 ай бұрын
There’s still a chance! Winter ain’t over
@demetriosa7646 5 ай бұрын
My craftsman doesn’t have the adjuster on the pulley. I can only adjust it by the cables that turn up or down and lock in the setting with a reverse bolt
@GarageGear 5 ай бұрын
Is this an older model?
@demetriosa7646 5 ай бұрын
@@GarageGear yes it the older craftsman eazy steer. It has the 2 belt auger pulley. I’ve had it for for about 21yrs. It’s is old and reliable! I’ve maintained it religiously 😉
@GarageGear 5 ай бұрын
@@demetriosa7646 yeah, yours will be different because it’s about 10 years older than this one.
@evenito9455 5 ай бұрын
What's your opinion on the EFI system on Ariens machines? The Pro 28 only comes with hydrostatic and EFI in Norway :) You are the Ariens guru and I trust your opinion
@GarageGear 5 ай бұрын
After researching efi in snowblower forums, Facebook groups and speaking with shop owners I decided to stay away from it. Shop mechanics said they are having multiple issue with them. They even said to stay away. Many people online said they are having trouble getting their machine started. I wish I could have gotten the transmission without efi but that’s the only way they sell it. I would avoid until they work the kinks out. 👍 thanks for being a cool fan evenito 👍
@evenito9455 5 ай бұрын
@@GarageGear thank you for such elaborative feedback JB 👍
@GarageGear 5 ай бұрын
@@evenito9455 you got it bud!👍
@gjordan8800 5 ай бұрын
JB please don't forget to include the link for the pull cord thank you
@GarageGear 5 ай бұрын
I’ll see what I can put together.
@gccjarsonists 5 ай бұрын
My craftsman blower has never thrown snow good lol i was gonna tear it down this summer and check on the bushings but we'll see if i get around to it haha
@GarageGear 5 ай бұрын
Always a fun summer project!
@gccjarsonists 5 ай бұрын
@@GarageGear after that 7' of snow we just got I can't wait for summer lol
@tempusveritas8901 5 ай бұрын
Good Advice on the mid-pulley. I see you used a handheld Pittsburg Socket Wrench. I used my Milwaukee M-12 powered ratchet for that adjustment. Big Mistake !! ( I tore out the threads) :-(
@GarageGear 5 ай бұрын
Ouch! Usually any tensioning things like that I’ll do by hand. Thanks for watching!
@kevinpickard9212 5 ай бұрын
Hi. I'm wondering if you have any problems finding new parts for MTD products. I have had no success at all, for my yardwork riding mower or my yard machine snowblower. I'm quite happy with the functionality of both machines, aside from getting parts. I enjoy your content, and find your teaching easy to understand. Thanks 👍
@GarageGear 5 ай бұрын
Glad you’re enjoying the channel! Thanks for following along. How old are your machines? That may be why it is difficult to find parts.
@kevinpickard9212 5 ай бұрын
@@GarageGear the lawn tractor is 2011, snowblower is 2010ish. Was looking for steering parts for the tractor. After three months , MTD was still unable to find parts Fortunately, I found a doner tractor with the parts. After four months waiting for a chute for the snowblower, they couldn't find any, and returned our money. They were very nice, just not very helpful. Also, any shop I have taken it to, won't work on it, because they can't get parts. Thanks for your reply.
@GarageGear 5 ай бұрын
@@kevinpickard9212 a doner may be the way to go!
@kevinpickard9212 5 ай бұрын
@@GarageGear thanks again. Was just hoping you knew of any resources. They are fine machines, and I keep them maintained, thanks to your channel. Have the best part of your day soon.
@GarageGear 5 ай бұрын
@@kevinpickard9212 you could always put a wanted ad on Craigslist in your area and see what comes up. Maybe you’ll have luck that way too.
@georgebenevides 5 ай бұрын
Good video. Terrible design. I'm glad my Murray doesn't have any crazy adjustments. Keep up the videos JB. Thanks in advance.
@GarageGear 5 ай бұрын
Appreciate the positive feedback George! Thanks for watching
@edallard6287 5 ай бұрын
Instead of fighting the bolt into the second hole could you insert it into the pulley first then the nut on the insides?😊
@GarageGear 5 ай бұрын
No, because the threaded end will bump into the impeller housing. It won’t fit. Thanks for watching!
@pjpankratz8829 5 ай бұрын
Thanks for the cable tension advise. Not something I was looking at but will going forward.
@GarageGear 5 ай бұрын
Glad to help!
@signintoconfirm5175 5 ай бұрын
JB, put a shutoff valve on that beast. I know, I know, I've previously asked on one of your vids and you awesomely said you'd put that on the list. It wont be easy though. My craftsman snow blower model is 247.886912 which is a similar engine setup to what you have.
@GarageGear 5 ай бұрын
I just haven’t gotten to it yet, but it’s on the list.
@lanceb940 5 ай бұрын
Nice, I have a similar unit w/ a Tecumseh engine. Noticed my belt seems a bit loose this last snowfall. It didn’t chirp when engaged this fall and seemed to struggle in slushy slop at the end of the driveway. I will check this. Thanks J
@GarageGear 5 ай бұрын
Give it a look! Maybe it just needs a tightening
@lanceb940 5 ай бұрын
@@GarageGear Sorry about your buffalo bills. HOW BOUT ThOSE CHIEFS!?!?!?!!!
@TecumsehRulesbcserk 5 ай бұрын
I’ve seen on the single stage snowblowers a second set of holes further up the handlebars for the engagement lever to fit into, when you put it into those holes it puts more tension on the cable and pulls the tensioner further down on the belt. This is also done to remedy the belt stretching out overtime. The strange thing is that I’ve been getting a lot of Ariens S18 single stage snowblowers coming into my shop because of shredded belts, to the point where I had to get an entire surplus of those belts just to keep up with demand. I believe this is happening because these belts are really thin compared to the one you’d find on a Toro single stage, and I’m guessing people are trying to clear really heavy snow with it and as a result it destroys the belt.
@GarageGear 5 ай бұрын
Wow! Good to know thanks for sharing that info! Appreciate it.
@LL-mt2nz 5 ай бұрын
The single stage Toro Power Clear is the best single stage bar none. There is a reason why contractors have them in their trucks.
@GarageGear 5 ай бұрын
@@LL-mt2nz thanks for sharing this.
@sukhs1317 5 ай бұрын
Hello brother, I have a question for you, I am bit confused with ariens engine showing on different websites with different designs. One is showing with deluxe sho 28 model 921048 with ariens round badge sign on front. Other sites showing same exact model without that badge or sign on front.
@GarageGear 5 ай бұрын
They’re all the same my friend.👍
@kencurtis228 5 ай бұрын
TY for Sharing
@GarageGear 5 ай бұрын
You got it!
@stevepelino5986 5 ай бұрын
Thank you JB for another informative and easy to follow video…Go BILLS !!
@GarageGear 5 ай бұрын
You got it Steve! GO BILLS!
@BenNawrath 5 ай бұрын
Would tightening that cable have the same effect as moving the bolt? I understand there’s limitations to both…
@GarageGear 5 ай бұрын
If the belt is really stretched out you have to move the pulley forward.
@gjordan8800 5 ай бұрын
Hi JB I was wondering if you have a video on how to change a pull cord on a craftsman snow blower?
@GarageGear 5 ай бұрын
I’m working on it. I’ll see what I can do. Stay tuned. Thanks
@gjordan8800 5 ай бұрын
Thanks JB😊
@lougarza2559 5 ай бұрын
Having an issue with my auger cable freezing up on my Husqvarna st224. Found the problem and it looks like I'll have to replace the cable in the spring before I put it away. Any input on how you adjust the tension on that model?
@GarageGear 5 ай бұрын
It could vary between models. I would have to see it in person to figure it out. Perhaps a small engine shop in your area could help?
@lougarza2559 5 ай бұрын
@GarageGear thanks mate, I'll look it up a bit more before taking it to a shop. Being a cheapskate is a big motivator for me lol
@kpd63110 5 ай бұрын
Hey love your videos. I have a quick question for you. I just bought a used Ariens 24 inch, I noticed yesterday that the auger continues to rotate after I release the auger control. When I push down the piece that the cable is conected to it stops moving. Would that be a cable ajustment issue or something else? Reply
@GarageGear 5 ай бұрын
Should be a simple cable adjustment is all that is needed.
@kpd63110 5 ай бұрын
Thanks@@GarageGear
@apexiumim2741 5 ай бұрын
Yet another winning vid! Have an awesome weekend!!
@GarageGear 5 ай бұрын
Thanks apex! Stay awesome my friend!
@whitke5504 5 ай бұрын
Put the bolt in from the other side?
@GarageGear 5 ай бұрын
The threaded side won’t fit. It will bump against the impeller housing.
@okanaganpeterjames 5 ай бұрын
what if you put the bolt through the other way when you put it back together? Probably the way it should be installed.
@GarageGear 5 ай бұрын
The threaded end won’t fit on the other end. It will bump into the housing.
@okanaganpeterjames 5 ай бұрын
like you said stupid design... i would only take it out once then I would take a zip disc and shorten the bolt... @@GarageGear
@GarageGear 5 ай бұрын
@@okanaganpeterjames not a bad plan
@chriswagner6310 5 ай бұрын
You are funny bro you crack me up😂😂😂😂😂
@GarageGear 5 ай бұрын
Haha! Glad I’m doing my job 😂
@chriswagner6310 5 ай бұрын
You do a good job making me laugh bro. The oil I use in my snowblower right now is royal purple synthetic oil that is the best oil you can use in the snow blower bro
@chriswagner6310 5 ай бұрын
I use 5W-30. Royal Purple. Synthetic oil
@chriswagner6310 5 ай бұрын
That's why it's still running today bro because I use Royal Purple. Synthetic oil. She is running strong as good as ever bro. You should put that in your snow blower
@GarageGear 5 ай бұрын
@@chriswagner6310 that’s good stuff!
@High61Way 5 ай бұрын
right on time !!!
@GarageGear 5 ай бұрын
Thanks for watching 61!
@gil3green 5 ай бұрын
More good stuff thanks!
@GarageGear 5 ай бұрын
Glad you enjoyed it! More to come!
@yalerich7417 5 ай бұрын
Oh, @ GO-BILLS!
@electroddxful 5 ай бұрын
Great video JB 🙏👍🙏👍
@GarageGear 5 ай бұрын
Thanks Ray! What’s the plan for the weekend?
@johnknorr1140 5 ай бұрын
Go Buffalo Bills 🏈🏈🏈
@GarageGear 5 ай бұрын
GO BILLS!
@user-qg6ep2fo3j 5 ай бұрын
Do you have a video of how to replace the impeller on a Sears 42" 2 stage snow thrower?
@GarageGear 5 ай бұрын
Hey my friend unfortunately I do not! Thanks for watching
@liljoeii6091 5 ай бұрын
THANK YOU FOR THE VIDEO
@GarageGear 5 ай бұрын
You got it Joe!
@Two_Buck 5 ай бұрын
Another good one JB.
@GarageGear 5 ай бұрын
Thanks Two-Buck! Have a good weekend!
@chriswagner6310 5 ай бұрын
How you doing bro
@GarageGear 5 ай бұрын
I’m doing great! Still snowing a little bit here. How are you today?
@chriswagner6310 5 ай бұрын
You did your job bro. You always make me laugh
@GarageGear 5 ай бұрын
@@chriswagner6310 I do what I can! Lol 😂 have a good weekend.
@chriswagner6310 5 ай бұрын
You have a good weekend too bro
@BigDaddysGarage 5 ай бұрын
Slacker! 😂
@GarageGear 5 ай бұрын
No McFly will ever amounted to anything in the history of hill valley! Lol
@BigDaddysGarage 5 ай бұрын
😂😂😂@@GarageGear
@smallblock412 5 ай бұрын
Loose belts sink snowblowers 😏
@GarageGear 5 ай бұрын
Got that right! 👍 what’s the plan this weekend bud?
@smallblock412 5 ай бұрын
@@GarageGear trying to stay warm, 12° as I type 🥶😁
@GarageGear 5 ай бұрын
@@smallblock412 about the same here my friend! Super cold!
@mj.5067 5 ай бұрын
That stupid shovel they include in every snow blower 🤦♂️
@GarageGear 5 ай бұрын
It’s pretty lame
@gjordan8800 5 ай бұрын
That stupid shovel is for the stupid people that would put their hand in the shoot! And then try to sue the snow blower company.
@GarageGear 5 ай бұрын
@@gjordan8800 yep! That’s what it is for!
@apexiumim2741 5 ай бұрын
It’s for pickup up dog poop.
@jeffk3499 5 ай бұрын
Some people still use those floppy disks🥸. Great video!
@GarageGear 5 ай бұрын
ROCK ON Jeff! 👍
Garage Gear
Рет қаралды 8 М.
HOW TO LUBRICATE AN AUGER GEARBOX ON A CRAFTSMAN, MTD OR CUB CADET SNOWBLOWER (Without A Drain Plug)
Garage Gear
Рет қаралды 98 М.
Bushcraft skills
Рет қаралды 14 МЛН
Natali Skorlupkina
Рет қаралды 2,5 МЛН
Özden Söğüt
Рет қаралды 17 МЛН
Nahuelinho RU
Рет қаралды 3,3 МЛН