Don't like loose saggy gundam joints? Neither do I! Let's get through this together! ^-^ Reupload due to reasons. Noisy reasons.
Пікірлер: 504
@alvodisco7 жыл бұрын
Holy shit I cannot get over how you pronounce Barbatos
@MechaGaikotsu7 жыл бұрын
I get these comments quite often, and I'm going to assume you watch the dub and that's where most people got the BARB-a-tos pronunciation. In the original it's バルバトス (barubatos), which is more like bar-bah-tos as they don't put any emphasis on the u sounds.
@alvodisco7 жыл бұрын
Don't take my comment as a negative reaction to how you pronounce it. If anything it just catches me off guard. And I've actually never seen the dub of the show
@mikazuki59317 жыл бұрын
The tail blade is upside down
@Pikminer-50877 жыл бұрын
Mecha Gaikotsu Next tutorial: how to stop tiny joints from pooping out. Looking at you rx 78 2 the origin sp.
@vali697 жыл бұрын
Mecha Gaikotsu barubatos sounds mooore delicious then barbatos or barbeatos
@lemeres24784 жыл бұрын
When they released the MG barbatos lupus, they will just put an actual mace into the box. Not a model- they will just put an actual medieval mace in there.
@GKaisaer1087 жыл бұрын
Nail Varnish? Its sounds like how to lazy tighten the joints with FABULOUS WAY
@mooncrysta4 жыл бұрын
Wait, is nail varnish = nail polish? enlighten me pls
@Gadcolouis4 жыл бұрын
@@mooncrysta It turns out that regardless of where you are from, you can call it whatever you want. If it lays a coat of color over your nails it’s nail varnish/ polish/ enamel/ lacquer/ paint.
@InconsistentContent3 жыл бұрын
@Carlos Keifer Delos Reyes it clearly doesn't
@baconace3 жыл бұрын
@Carlos Keifer Delos Reyes You're thinking of nail polish remover, which is acetone, and will definitely melt most plastics.
@lexy17483 жыл бұрын
If you’re fixing the Barbatos, you might as well fix those hands too
@barkssss7 жыл бұрын
You should just start calling this " The Lazy Tutorial Series " or something. ...Crank-nii
@thetsarofall86667 жыл бұрын
Ein Dalton C R A N K U N I
@doctorlasagna11876 жыл бұрын
BALLDOOIN TOKUMU SANSA
@angelabatiii27292 жыл бұрын
I'm 4 years late in watching this but I just started building gunpla. Thanks Mecha Gaikotsu for the tip in tightening loose pegs or joints 😁👍
@yodela4567 жыл бұрын
now off we go to get the nail varnish and tighten them balls. i mean the ball joint.
@themclord64437 жыл бұрын
Ikhlas Saikyo does nail polish also work?
@guillotinegundam12336 жыл бұрын
TheMCLord64 yes
@hteekay7 жыл бұрын
the mace itself can't even hold its own weight. The handle start to bend once you extent it
@KhezuWiggles4 жыл бұрын
hteekay maybe you could add in a lot of extra detail(carving) and a few stylistic holds?
@orno03214 жыл бұрын
I guess you could fix that if you -somehow- drill a hole straight through it, and put in a steel rod?
@lemeres24784 жыл бұрын
The barbatos here is a nice example for explaining why you can't have weapons that are too long and heavy for a given material.
@kurukuru41204 жыл бұрын
@@lemeres2478 being a mace is okay, but having a goddamn long mace is where it starts to screw up.
@lemeres24784 жыл бұрын
@@kurukuru4120 exactly. The longer it is, the more leverage it has, which better allows the weight to act against the tensile strength of the material. Especially a weapon that has all its weight at one end like this. This is why you don't see great swords until the middle ages. The metal just sucked too much to avoid snapping.
@duelgundam7 жыл бұрын
Well, for me: I use a VERY thin layer of super glue to bulk up the joints(the key is to let it dry BEFORE attaching the connecting pieces) But do not that abs joints can wear out even worst if the joints are bigger than it's intended clearance.
@sayonarashadow7 жыл бұрын
Lol, I second the nails thing! My nails grow at an accelerated rate I cut them and then bam! 3 days later I look like Lupus rex. But they come in handy more than you'd think.
@MechaGaikotsu7 жыл бұрын
+Stephen Davila do you find that your hair grows way too damn fast too? It's a real pain in the ass!
@Frost_Glitch2.03 жыл бұрын
@@MechaGaikotsu yess I experience the same thing ik your comment is three years old I am just bored
@NexusSamurai2 жыл бұрын
Rip them off
@cissuperdroid7 жыл бұрын
Glad someone else uses clear nail polish! I figured it out years ago, and it hasn't failed me since! Also functions as a kind of glue, as well as the obvious clear coat!
@charsteelcap7 жыл бұрын
Nice. My Vidar is loose af and this video just popped up. thank you papa
@nikamirhalim7 жыл бұрын
Char F. which vidar did you bought? Hg or fm 1/100?
@charsteelcap7 жыл бұрын
1/100
@keegagongon5 жыл бұрын
I looked up this video just for my vidar. I hate the backpack wings....
@cantrememberusername4 жыл бұрын
My first build was a vidar 1/144, AND Man it was so loose, still waiting to build another kit but idk, hope others arent so.loose
@RathalosEmperor2 жыл бұрын
Well this sucks I really wanted to vidar. I just got into gunpla but vidar looks cool
@samurai_v946 жыл бұрын
Lmfao I died when he said “but I don’t have all that shot” too relatable
@zacharyadams6159 Жыл бұрын
This helped a TON. I have the Heavy Arms Custom HG kit from 97 and one arm joint was too loose to pose. After watching this i got the idea to jam a small piece of scotch tape in the joint and it worked like a charm
@ME-kx9od7 жыл бұрын
I am new at Gunpla building and stuff. So it is great to see that you are making these tutorial vids.
@thedudemanist5 ай бұрын
This helped immensely with a trigger hand that wouldn’t stay clasped. After about four coats it’s not coming loose on its own! I’m trying this with the RG RX 78 2 on a lot of joints that just don’t want to stay on. Even the shitty hands have improved, though I’m on like 5 coats and I’m incredulous that’ll truly solve the problem with them.
@thomashare67337 жыл бұрын
What we learned today, Big Mace Chan is bad.
@ZeroStrife13967 жыл бұрын
Thomas Tiger Mace-chan did nothing wrong (>3
@krysle33377 жыл бұрын
Etienne de la Rosa The Barbatos isn't weak. Mace-chan is just too sexy for any Gundam ever
@crocgator36935 жыл бұрын
Mace Chan is overweight
@billrex4 жыл бұрын
@@crocgator3693 too thicc
@pickauusername4 жыл бұрын
It is mace kun for the lupus rex
@BigWired3 жыл бұрын
Hey, I was googling up how to fix loose joint issue, and this video came up in the search results. Thank you for the advice, I only put together these kits every now and then, and I've a 1/100 Tallgeese to finish, but the joints are way loose, to the point where the arms will fall off under any kind of weight. So, off to the store tomorrow to buy some nail varnish.
@gudakoalter7 жыл бұрын
loved these lazy tutorials. please make one about painting kits
@tenebrasolanum42157 жыл бұрын
I loved the display of the lupus smashing down on thin air at the end. But yeah, it seems nail varnish is the way to go, people like Vangelus who builds transformer kits (which are bulkier and heavier) use it all the time in his streams. EDIT: You might want to do 2-3 coats tho, depending on how loose the actual connection is, if the hand is flopping with no weight on it, then tighten the wrist with cement or maybe some thin blu-tac, then try putting nail varnish on it if it persists. Only problem with taking things apart is the Lupus' legs on all of his models, they have a clip just on the inside of the heel that makes it near impossible to take apart without forcing it and breaking the tabs, but the inside of the foot has pegs, so tightening those and a little cleanup should do it.
@hungrybonsai71807 жыл бұрын
I like how you hit the highlights in a short period of time. I don't always have 20-40 minutes to find out to use paint or nailpolish to tighten joints. working on my first Gundam now and find your videos helpful. new subscriber here. thanks for the videos.
@CyberScorpio947 жыл бұрын
I would like to thank you for making this video because I got this kit today and seeing this helped me fix the problems of the loose joints as I am assembling it.
@Zeromusicmm5 жыл бұрын
Dude - you just saved my HG Psycho Gundam . . . I was about to give up on that sucker, just couldn't hold up that MASSIVE shield. THANKS!
@ShroudSavage7 жыл бұрын
have you ever tried using pledge floor care? it thickens joints really well in comparison to the ones you showed in the video. you just have leave it to dry over night.
@fikrifauzan18297 жыл бұрын
i'm building the same kit and did the way you done it, its very useful,its working thanks !
@matlavi40757 жыл бұрын
I'm going to try this on my mg exia. Thanks for the tutorials! I lok forward to the next one.
@anub1s155 жыл бұрын
thanks for the tip, picked up a bottle of XF-24 and it's worked wonders for Kshatriya and 00 raiser making them a bit more rigid and stable, thinking of trying the upper arm to shoulder joint on the 00 raiser next see if he has a chance in hell of keeping his sword oriented anyway but down. also seems to be working for sinanju ,he couldn't even hold the empty gun in his hand before without it shooting loose at the lightest touch, now he can hold it with the big bazooka attached but the wrist which i for a moment thought was stiff and strait is actually not and is unable to hold it up but that what the XF-24 is for :P ( update : hand peg tight enough, wrist peg tight enough, connection between hand and wrist giving a little... it never ends T.T i'll get him to hold this stupidly sized machinegun+hyperbazooka combo yet even though it almost clearly seems like a actionbase 4 combo so you can support the thing :P)
@kenaldrineph55505 жыл бұрын
thank you for showing as all for tithening the ball joints
@thebuildbear5 жыл бұрын
Dude. I tried the nail varnish on my EW Epyon Gundam--specifically the heat rod. It worked. I also tried it on my wing tips for MG wing zero custom that kept falling off. And the GN Shoulder Shield for 00 Qanta. All parts are stiff as hell. Though the heat rod is loose beacuse its degined that way when not in Mobile Armor mode. But it works.
@thebignut55715 жыл бұрын
Omg thank you my Leo lpd was super loose on the waist and legs and now it's perfect thank you!
@fatalstriker13107 жыл бұрын
Funny since I just started having loose joint problems, great tutorial, thanks
@HallwayofCopium5 жыл бұрын
Pretty surprised it actually still works after a few years. But 1 minor complaint is that it causes the plastic to do some weird stuff, or it could be the nail polish/varnish
@Shaqdog7 жыл бұрын
you can also use elmer's glue for the joints to tighten it up if you don't have paint
@dedysugengsantoso75057 жыл бұрын
Nice tutorial dude. I would love to see more things like this one . .
@neilwood50817 жыл бұрын
Another great video for some newer modelers.
@TRIVIUMDAVEX7 жыл бұрын
Clear nail varnish is what I use, works great.
@themclord64437 жыл бұрын
B1GDAV3 does nail polish also work?
@TRIVIUMDAVEX7 жыл бұрын
TheMCLord64 works great, lasts well too
@jl_studios75706 жыл бұрын
How does it works on the Delta Plus' feet joint?
@RekoTheProducer6 жыл бұрын
陪你聊聊天柯南 it works on everything
@pixelbrander92286 жыл бұрын
Thank you I needed this my hg build strike gundam booster pack joints kept falling off now I’m painting it and it’ll work
@ChukFlanagan7 жыл бұрын
for a quick... really quick.... fix for balls joints , i put the smallest amount of poster putty, the blue sticky tack stuff in the joint . works awesome. after like a yr it might dry up.
@kentrillbg17 жыл бұрын
Great tutorial ! Just 1 thing - I use matt clear paint to tighten joins and it works great ( best is Enamel kind, but acrylic works great too)
@Akiwaaa_10 ай бұрын
I am 6 years late, but is it really better the enamel one? And if so, why?
@kentrillbg110 ай бұрын
@@Akiwaaa_ enamel is thicker (I still use Revell one) & more durable than the acrylic
@BNuts7 жыл бұрын
Oh, I'd definitely like to see more lazy / cheap ways to improve and customize gunpla. Also scratch building if you have done any of that. So far I've only kitbashed and customized using what's in the box, so to speak, and the only paint I have on hand is gundam markers. Given you'd probably end up stiffening all the joints on the FM Rex, I'm supposing you could jut get the HG and paint what needs the detail. The HG can hold up that Mega-Mace no problem, it seems, so an IBO HG finally has an advantage over the FM. But I'll wait for Bandai's final release for the Barbatos to decide which version I will eventually buy. I'm also not sure about the Bael yet. Some people are comparing it to the 1.5 Gundam, which I have. I might get the FM Vidar and do an Arya Stark custom with it when it goes on sale. I'm also curious about the Kimaris Vidar. The drill lance has sort of an _Ea_ vibe to it, and the shields remind me of the Dendronium. Drills, man. These IBO kits and their modelling tools.
@driver67503 жыл бұрын
Best intro yet
@dermieravage30407 жыл бұрын
Thanks, gonna try these tricks on my MG Gouf Custom.
@lemming47744 жыл бұрын
I used this and it worked fairly nicely
@malazarteeusef83187 жыл бұрын
I like the nail varnish because it made my Force Impulse's joints tight and the Silhouette Flyer's wings and the lower part and also the connector
@jtsh19802 жыл бұрын
Is it the HG Force Impulse Gundam Remake? I have problems with the feet/ankle joint and the waist joint. Which joints did you experience the looseness for your Force Impulse?
@r.a.fgattaiguy8455 жыл бұрын
Say, I just used that nail keratin thingy :I How long do I have to let it sit for?
@Riitje Жыл бұрын
I'm still fairly new to building and have only done a couple of kits. Mostly Medabots. I find them to have very loose joints which makes posing a nightmare. Thanks for the tips!
@TotalXPvideos Жыл бұрын
Exact same problem i have with my metabee, especially his lower arm joint just got chewed up while inserting.
@strykerj22627 жыл бұрын
It works pretty well. My Rex is holding the Mace up pretty well
@yusufihafiz10476 жыл бұрын
I use super that's in a bottle and squeeze out a bit and wrap it around the loose joint. Just a different way if you don't have all the things in the video. If you don't have superglue, I don't know what can
@bigbrainchica54737 жыл бұрын
I use superglue.I put some glue on the joint,I stick it inside,then move it around to make sure it doesn't get fixed.Not only does it tighten the joint,but also the polycap/peg hole it was in.
@outerspacekaloy Жыл бұрын
Thanks for this, and it's exactly the Barbatos' joints why I'm here 😅
@Grease133 жыл бұрын
I put a small dot of superglue/nailglue ontop of the ball and i use the skinny plastic handle piece of a q-tip and spread it thin on the ball and let it dry for 2-3 mins.
@OtherMomo4 жыл бұрын
When the MG Barbatos comes out, can you use this Baratos Lupus Rex Mace to test the arm strength of the MG? I noticed the original mace got a slimmed-down redesign and I'm wondering if it was to be made lighter or to make it more sleek, cuz the barbatos swung it like a baseball bat, which is hard to imagine at it's original size. So yeah, see if the new MG can hold this behemoth of a Full Mechanics mace
@hawkensanimations25164 жыл бұрын
im telling you right now mg can hold it like a boss
@ikhwan-saneq-0184 Жыл бұрын
Do I need to topcoat if I wanna use the nail polish? Acetone-free ones, of course.
@m8subject996 Жыл бұрын
usually if i have a loose joint or connection in a kit i just put a piece of papertowel... its just to hold it in and it works pretty well.
@jeiku_balmung_iraisan6 жыл бұрын
I had no idea the master grade Barbatos lupus Rex arms were a ball joint connected to a polycap that could be pretty useful for kit bashing with kits like a master grade Exia from Gundam 00 to make a even fiercer mobile suit ^^
@tokugeeky29315 ай бұрын
Nice video hope this will work for my HG Destiny. Love the kits but I don’t know if I put it wrong or something the joints feel so loose 😂
@AttisSoul3 жыл бұрын
Cool i will try these on my loose Leo and see if it will stay together.
@venomouslizards6 жыл бұрын
Do these same techniques work on polycap joints? My old 1/100 Shenlong Gundam is in need of it.
@terutend0777 жыл бұрын
saw somewhere on a reddit to take grocery bags and stuff bits into the joints tried it myself and it works wonders
@apatoxic7 жыл бұрын
Anthony Matero wow,how about neck joints? My 1/144 HG SCHUZRUM GALLUSS' head pops of when i move it
@kenway98577 жыл бұрын
What i do is i spray paint all the runners that contain frame parts before assembling the kit. Gives it a better look and makes every joint tight.
@Nel9807 жыл бұрын
Will this work with the RG Build Strike's loose waist? I haven't gotten around to actually building it, but your review made me nervous about the build.
@granmastersword6 жыл бұрын
Question, in which parts do you need to fix from the Delta Plus and how? I like the design and I would like to buy it, but first I would like to know how to fix its stability issue
@thebuildbear7 жыл бұрын
im going to use this on my rg Exia and RG Strike Freedom. The GN Sword for my Exia and Rg Qan [T] are loose in some areas but mainly the weaponry
@dangernoodle88677 жыл бұрын
Something I suggest is to look into rc cars parts because there are certain things that are basically fast drying plastic that you can paint on to add friction
@robertwhite78455 жыл бұрын
You can always use nail polish as well to tighten joints on gundam model kits
@dylanher16687 жыл бұрын
does enamel paint work better or does acrylic paint work better for tighting the joint?
@supershadixboom40407 жыл бұрын
I agree mechagaikotsu people always tell me to cut my nails but I think its useful separate pieces on a kit
@HaohmaruHL Жыл бұрын
So how are the joints 6 years later? Does nail varnish cause any degradation or other negative effects on plastic?
@giaphu520205 жыл бұрын
- I have tried this at home but the way i see it is to paint on the joints 1 TIME only (paint the joins too much or too many times will leave residue) and then add a small piece of tissue paper (or normal paper) as small as the size of the points, this will make the joints be stiff but movable.
@RathalosEmperor2 жыл бұрын
Would it be smart to just do this to all joints or parts that will be moving most for posing just incase and to avoid any loose issues ?
@GSE19163 жыл бұрын
Youre most likely not gonna see this but i have a legit dumb question for the varnish. Does the nail varnish also work for robot spirits joints, especially the metal robot spirits?
@kazuma23554 жыл бұрын
What a life saver. Thank you sooooo much!
@matthewbrookeart3 ай бұрын
I have some really old 90s models and the arms are super loose specially on my gundam maxter I’ll give this a go
@neilsutcliffe5825 Жыл бұрын
5 years later, which of your tightening techniques has held up best?
@muladiajisasmito13617 жыл бұрын
I have already played the 'why' part more than ten times, is that normal?
@claresaprama4997 жыл бұрын
Muladi Ajisasmito Yes, it is...
@darthzillaa6 жыл бұрын
My 1/100 graze commander/standard type has extremely fragile arm joints to the torso the arms just keep falling off with the slightest touch and it’s very disappointing, do you have any suggestions on how to fix this?
@chrlsvllstr9 ай бұрын
The dark gray paint just literally tightens the joints, but will still be loosen over time. So even though covering a joint on paint, the gunpla wouldn't hold a pose for just even a day.
@karlgaspar99227 жыл бұрын
DUDE PLEASE MAKE MORE GUNDAM BREAKER 3 VIDEOS HUHUHU BEEN WAITING FOR THE NEXT PART
@drakonemperor1446 жыл бұрын
Does adding tamiya plastic cement on the ball joint of the manipulator work?
@alexforster45983 жыл бұрын
What is the chemical in certain nail polishes/varnishes that would melt plastic?
@seb247897 жыл бұрын
Just what i needed right now. My G-Arcane has a problem with the huge ass sniper rifle.
@RedRadio114 жыл бұрын
Are we really need to use acrylic paint? What if I use gloss paint instead, is the effect still same?
@Ozwald_Baskev7 жыл бұрын
assuming it would work withe the 1/100 Gusions upper leg joints right?
@Press_X_to_doubt7 жыл бұрын
How about putting adhesive glue on the sucking to mimic a rubbery texture of the polycaps?
@palewhite5 жыл бұрын
How often are joints weak from same model to model? Wouldn't it be determine more from cure times from manufacturing?
@nbrs5602Ай бұрын
My Barbatos lupus rex has a problem with its shoulder joint which it keeps on poping out (the circle joint that makes the arms flap that part you pointed out at 3:14) and also the shoulder guards so how can i fix it?
@stunned_iroiki7 жыл бұрын
Dude thank u so much! This helped out so much
@russellthescout96395 жыл бұрын
Can I use clear nail polish generally? like just thickening everything with just nail polish?
@alosthigh-endgpu72545 жыл бұрын
That intro showing barbatos shouting "WWWHHHYY!!??"
@gcell104 жыл бұрын
Would this work on the hands of the early 2000s 1/144 RX-78 GP02 so they won't fall apart from the wieght of the shield?
@itzneoxys27816 жыл бұрын
Is it possible to use Elmer’s cement for the seam line and ball joints?
@MrMegaDude2017 жыл бұрын
Another lazy way is to use 1 or 2 ply paper and put it on the peg or ball. My Exia Dark matter's hip joints became loose and painting seemed to stretched the female end. So I used paper towel and now it does not slip off.
@jasperzoids25447 жыл бұрын
what brand of nail polish do you use to tight the joints ?
@aldiferdiansyah52262 жыл бұрын
I don't know I'm new to this gunpla things, i just use tissue for the loose joint, is it bad idea?
@mostlyjoe4 жыл бұрын
I wonder if you can use a tiny amount of Loctite tread locker on those rotation joints.
@michaelb65546 жыл бұрын
I am new to your channel, looking good and am so jealous, great gundam sets.
@UnversedXIII7 жыл бұрын
I've been having problems with My RG exias gn sword. The blade is too heavy.
@mars93807 жыл бұрын
I learned this stuff because i have no budget to buy tools and paints. Before i bought my nippers, i use nail cutter to remove excess nubs 😀
@sejo52307 жыл бұрын
This guy's voice is awesome
@An-Account_16 ай бұрын
Will these methods work for the MG Nu Ver Ka?
@user-kp6ej2bd8o Жыл бұрын
I use tissue paper to put in between the ball joints and sockets