I do window tinting in Texas and I’ve been asked about this many times. this is probably one of the best instructional videos I have come across thank you
@aomelodioushawk9023 жыл бұрын
Could I use tint from wish to tint mine? They said it was window tont so in wondering if I could still use it
@ShawnGS300 Жыл бұрын
Did he use the smoke tint or the dark tint?
@lifewitwooh Жыл бұрын
I just got asked and here I am lol
@miguelmarquez6358 Жыл бұрын
I used they’re tint and used this video to help me tint my tail lights and headlights and that shit worked amazing
@kennantate90006 жыл бұрын
"I'm actually on the website too if you'd like to purchase me"
@lakerland245 жыл бұрын
Kennan Tate omfg ahahah
@stanleysoss6 жыл бұрын
this car is also available on the website
@andrelewis89216 жыл бұрын
Stanley So lmao
@alexafa3166 жыл бұрын
He’s also available on the website
@jawkman1016 жыл бұрын
why would they use or advertise other equipment when they have there own to sell and rep to show it gets the job done lmao
@alexafa3166 жыл бұрын
jack bush exactly
@JamesSiek6 жыл бұрын
Stanley So lol
@Angel425156 жыл бұрын
Surprised he didn't try to sell us his water gun😂
@StefanThePro6 жыл бұрын
raul menedez Premium Brand spray bottles are available on the site as well
@sleepclaim6 жыл бұрын
And his fing too hahhahah
@mymindtattedalready92576 жыл бұрын
Available on the website lol
@marcovalle94106 жыл бұрын
The website is also available on the website
@daraprom17846 жыл бұрын
raul menedez yuh Drf uded um hi hi h nu gh
@cloud45656 жыл бұрын
The claybar and soapy water reminds me of chris fix
@XevilangleX6 жыл бұрын
Ishaaq Ansar soapy wooder*
@Aidan157005 жыл бұрын
Wonder
@roni26715 жыл бұрын
Out with old in with new one 😂😂😂
@MayoBO95 жыл бұрын
i read soapy water in his voice
@Sierra-or9fx5 жыл бұрын
LOL so true
@curlygirly2405 жыл бұрын
In my opinion tinted tail lights are easier to see because the red tail lights you can’t really tell when the light is on it’s just a brighter red. I love the look! Had my civic taillights tinted for 3 years never had a problem
@Alflame3 жыл бұрын
This vid covers all bases and whilst I've seen a couple of these how-to's on youtube, this is just so well done. Thanks man. Quite well laid out and made it easy to watch!
@barbara58785 жыл бұрын
This Jetta is actually also available on our website
@chestercheetos3394 жыл бұрын
And for that reason I'm out!
@nightcall73983 жыл бұрын
Out of all the videos I have searched this was the most helpful one that made me feel confident in doing my own install. Thanks guys! Much love and respect from Cali!
@huntergray41162 жыл бұрын
how did it go?
@lukestevenson97452 жыл бұрын
@@huntergray4116 not so good
@tunaonwhitenocrusts4 жыл бұрын
4:32 Second hand is also available on our website
@muhammedomarmalik89093 жыл бұрын
Best comment 😂😂
@JustinBarger-qd5hs6 жыл бұрын
Just wanna say very well done video. So many instructional videos on KZfaq are clunky and aggravating but you guys nailed it.
@Mikkifive2 жыл бұрын
At first, I didn't think I could do this myself on my 08 HHR SS rear lenses, but after watching your very instructional video, I think I can. I'll have to wait till spring though. Thanks for the video!
@karhaa4 жыл бұрын
11:37 you can purchase that air bubble on their website
@Roulette554 жыл бұрын
That's the hole in the taillight, he even explains that during the video
@idkchocolate3 жыл бұрын
@@Roulette55 the hole wasnt on the bottom right
@karambrar85523 жыл бұрын
Bro this guy got roasted so bad in the comments. 🤣 🤣 🤣 🤣
@StanleyKubick13 жыл бұрын
3m views makes up for the jabs
@Vibezz9210 ай бұрын
He got 27 k likes … you got 43 🤦♂️
@stephan976 жыл бұрын
Forget the lights, I need homeboy’s barber
@goodstuff516 жыл бұрын
TheLegend27
@JM-yx1lm6 жыл бұрын
Its available on the website..
@mathewbolles3146 жыл бұрын
Stephan D that is a fresh cut.
@krismargett5 жыл бұрын
For his head or is arms?
@mmlindsey86355 жыл бұрын
AGREE
@juliusechevarria17904 жыл бұрын
I was looking for a tint tail light video and I didn't expect it to be the same e car as mine 🤣🤣🤣 thank you so much
@joepatcity83206 жыл бұрын
I clear coat them with PPG after I nightshade but I have a body shop so that's hard for anyone to do at home but I get a mirror finish after I'm done and I always tape off the reverse lights I like being able to see when I back up at night. But I still like y'alls product it's perfect for the average do it yourselfer.
@davidsgarage445 жыл бұрын
Joe Patcity ive done it 100s of times like that and all thrm lights i did still look like glass and will outlast ant film by 10 years easy
@tuTWENTY5 жыл бұрын
Exactly it’s all about the effort nightshade can be used effectively and look nice if done right. Most people just spray them and don’t even bother to see if it’s even and just leave it but if you actually but effort into them. Like spraying them then doing a light wet sand then spray a few coats if clear and also do some wet sanding and then polish them. They will come out with a high gloss mirror finish with simple products. But nobody does all that effort so they look all dull and like shit.
@davidsgarage445 жыл бұрын
Drew tutwenty thats why you clearcoat over it and not rattlecan clear either,correct way is to use a transparent black basecoat and then to clear them
@franktupa16145 жыл бұрын
david peirce were talking the average consumer who buys nightshade who it’s marketed too. Not everyone has access to professional materials or A booth. Of course the proper way is to have a body shop do it but these steps is for your average garage worker.
@Bruhx46 жыл бұрын
Is your company for sale on the website ?
@Vision-MileHigh5 жыл бұрын
Yes. Everything must go!
@darionpoole44033 жыл бұрын
I can tell he’s used to telling customers the same thing over to assure the customer everything is cool. I do car audio and I find myself repeating the same stuff for them to wind up asking the same question. Either way, good vid man I’m inspired to do my own now
@Dexfire206 жыл бұрын
2:20 "Soapy Wooder"
@colinwhite19976 жыл бұрын
Dexfire chrissssssss
@elchapo19926 жыл бұрын
Chris fix here
@mikeytuns6 жыл бұрын
Dexfire HEEEYYYY GUYSSSS lol
@jrnowlin65916 жыл бұрын
Funny
@theelectriczoneYT5 жыл бұрын
Chris Fix Be Like!
@freddieclaassens74995 жыл бұрын
looks good tried it on my audi damn it was hard , ripped it of at the end and left it stock
@Airown4 жыл бұрын
You make it look so damn easy!! 🤙🏽🤙🏽
@rustyshackleferd2045 жыл бұрын
You guys make this look extremely easy, wrapping anything is very difficult. Leave it to the pros, worth it in the end.
@benjaminkoren43263 жыл бұрын
What % tint film was that?
@TroobAdoreMusic6 жыл бұрын
is the car, also, available on the website?
@kitler245 жыл бұрын
And it actually actualizes the actualization. Actually.
@UrbanSleepersOfficial6 жыл бұрын
Hey thank you for your helpful videos! I appreciate the tips and tricks!
@RetrocarStyle5 жыл бұрын
I really dig how you mixed in the music track to the video. Keep it up mang!
@OctoCopter6 жыл бұрын
Is there anyway you can show the difference in percentages of tint vs how "blacked out" you're trying to go? This was a very helpful video my man. Many thanks!
@thaddeauscaldwell71015 жыл бұрын
You did an excellent job tinting the rear taillights. Two thumbs up👍👍. If you can tint the rear taillights on my 1995 Mercedes SL , I'll ship you the taillights , since I live out of state .
@zoerbra5 жыл бұрын
Thaddeaus Caldwell 😂😂😂
@realtywithseankemp97045 жыл бұрын
A good install and prep as well as several clear coats. Night shade is awesome
@alfredomendez52103 жыл бұрын
Hell yeah man this video is very helpful. Just what I needed to get this job done
@dartmouthskater256 жыл бұрын
if you buff vht nightshade after it dries it gets shiny and looks way better almost like film tint
@rts1596 жыл бұрын
luke tisdelle it's not good for the taillight though, it's shiny cause of the grease and grease is really bad for taillights, headlights etc.. it eats it out (my opinion shouldn't matter lol)
@moedogger216 жыл бұрын
RTS that isn't true. You can take some carb cleaner and clean your taillights off a year later if you want and it will look brand new
@joepatcity83206 жыл бұрын
I clear coat them with PPG after nightshade but I have a body shop so that's hard for anyone to do at home but I get a perfect mirror after I'm done and I alway tape off the reverse lights. I like seeing when I back up at night but still really like y'alls product it's great for the average Do it yourselfer
@SHIFTIBOI6 жыл бұрын
Yea I used Maguires Ultimate Compound on mine and they came up great. Still dark and shiny a couple years later.
@boooshman836 жыл бұрын
Joe Patcity I’m I the only one who thought... that’s all of f**king work, when u can clear coat the spray tint and use compound after. Totally agree with you guys👌
@xxeidolon6 жыл бұрын
video was better than what I was expecting.
@danfinnigan24894 жыл бұрын
Wow flawless install. Great instructional video!
@dustinjackson91105 жыл бұрын
just brake cleaner to remove the vht?
@seansullivan45384 жыл бұрын
What percent tint did you use?
@joelgomez5626 жыл бұрын
I've used nightshade multiple time and mine never looked that. Especially after a good coat of clear it looks nice
@JesseEns7 жыл бұрын
Awesome tutorial. Reppin you guys on my first gen fit. I want to do a neochrome tint on my headlights.
@fatboyshadetree51396 жыл бұрын
first of all this tint job looks awesome. love the result. i was gonna spray mine but im convinced not to now. i have a 01 sunfire (its mine and i like it) and would do this myself. would you recomend using a little water/soap or a bunch on the sticky side at first?
@jrmathes65675 жыл бұрын
Thanks for putting this up P.G I've never seen it done before, it was interesting
@cdavid0015 жыл бұрын
Great video I will be tinning my light soon as my supplies come off eBay thanks a lot.
@slowpoke45475 жыл бұрын
Looks great! Good video! I learned a lot.
@rileym26786 жыл бұрын
I’ve used VHT night shades several times on my cars, if the light looks that nice after you stripped it, the niteshades wasn’t done properly is why it looks so bad, also you’re supposed to clear over niteshades after spraying it, all my lights looked as good or better than tinting the tail light. But I wouldn’t recommend using the niteshades if you aren’t a good painter of auto parts. I checked out this video because I was to try tinting my new cars lights instead of painting so it’s not permanent Great video 👍🏼
@elleryjqueen17126 жыл бұрын
I thought it looked better with the factory finish, but you done a tidy job, good video, thumbs up from me.
@shane17596 жыл бұрын
Noice! Very instructive. I will definitely will keep this vid in mind for when I get to it. Thanks guys!
@roberthein21566 жыл бұрын
Good work, fact I didn't see a can of beer next to you. Sincere job.
@vinipess4 жыл бұрын
You should have done it with the trunk open, to go across the tail lights entirely....
@sTaRkZ0916 жыл бұрын
@1:35 That light actually looked pretty sick.
@midninteranger43156 жыл бұрын
Wow what a difference looks good, I think I'll do this on my Tacoma. Thanks
@seanmeyers40505 жыл бұрын
I used a spray tint and a semi gloss clear coat and in my opinion it was way better, my taillights have odd indent designs (2003 Ford Escape) and even a weird dip in the plastic. I have them super dark and they still shine through very well. I would recommend if you are worried and have an older car to get brighter bulbs though but stock should be fine
@Tr4nc34Lif35 жыл бұрын
What version of "Danny Brown - Grown Up" is that song in the background?
@Phrippe2373 жыл бұрын
Apparently it’s a secret...
@ethandavis65213 жыл бұрын
@@Phrippe237 Yeah I've been looking for it for years. Still haven't found it lol
@kirstinb35925 жыл бұрын
I live in Arizona, I spray painted my tail lights with some cheap spray from Walmart & got pulled over 3 days later. I removed the spray paint & had it done professionally & havent been pulled over since. Tail light film is actually legal in Arizona, but your lights need to be seen clearly.
@kanoandlupo37075 жыл бұрын
I live in Arizona and our cops do not fuck around they do there job some times a little bit to much lol
@kirstinb35925 жыл бұрын
@@kanoandlupo3707 I couldn't agree more. Lol
@kanoandlupo37075 жыл бұрын
@@kirstinb3592 take care merry Christmas:)
@kirstinb35925 жыл бұрын
@@kanoandlupo3707 Thank you! You as well! 🎄
@TheLiloscar145 жыл бұрын
I agree. I live in az and never had any issues from my previous cars with tint
@ericadams4527 жыл бұрын
Nice video, thanks for going more into detail with this one.
@stevespencer44452 жыл бұрын
Mine are being tinted right now. Good to see how it's actually done 🙂
@barberek22016 жыл бұрын
Well done! Very profesional video
@GeraldArndt6 жыл бұрын
For those "bubbles", wouldn't filling them in with clear nail polish work to prevent the dimpling effect? Kind of like transparent bondo. Let it dry and smooth it with the clay-bar again.
@mrbobsevil2 жыл бұрын
The nail polish solvent would "fog" the plastic on the tail light. You definitely want the film bonded with the light itself not with any filler between.
@felixfortunato18956 жыл бұрын
Nice video!! I was wondering Do you guys sell pre-cut tail light tints for an 02 Toyota Sequoia? Can they be tinted the rear tail lights.
@djmikesea Жыл бұрын
great vid. you explain everything really well. thanks what percent tint did you use ?
@85boxchevy105 жыл бұрын
What percent tint was ‘this for the taillights
@zernid4 жыл бұрын
There’s no percent they are done by shade where I went had a tailight with shade samples
@ZL1Dnero4 жыл бұрын
Looks like 10%
@yodead3694 жыл бұрын
@@ZL1Dnero 10!!! 5 is lambo..fuck lol.
@knifethrower97334 жыл бұрын
I thought it looked sick when he wiped half the spray tint 😂
@stevensnooks31525 жыл бұрын
Iv done quite a few diff lights now. But i just cant seem to do a renult clio cup sport. There impossible
@tankenner60126 жыл бұрын
I feel that rubbing off the parts that emits the brake lights will do. The nightshade on the outer region will give it a pretty decent fade off effect
@MrFunkapotamus6 жыл бұрын
indent in light could easily be filled with Super/Krazy glue ( Cyanoacrylate) and 3000 grit paper.
@intensegaming52287 жыл бұрын
is it just me or was this uploaded a few days ago
@sawyerhiscox11336 жыл бұрын
Hey guys Chris fix here
@Jamsk8s76 жыл бұрын
U do it so perfectly if I did it then you would have to be my mentor
@Fabb9084 жыл бұрын
I tried vivids dry application and this film seems a lot more forgiving. The vivid wrinkles a lot and you can’t get enough heat to make it lay nice without burning it. Definitely gonna try this film next
@ZZ907556 жыл бұрын
Why didn’t you show the damage you did to the right tail light
@elomeli2115 жыл бұрын
What damage?
@willbrewa4 жыл бұрын
@@elomeli211 I think he's talking about overheating the plastic... seems fine to me.
@fernandomfm846 жыл бұрын
Yes when they use the Nightshade they forgot to do one last step which is to put a couple coats of clearcoat or else he would have come out looking pretty good
@81recinos6 жыл бұрын
That looks really good
@tokyokimi25313 жыл бұрын
Ahhh best video ever. I can’t wait to do mines.
@darrellsyrnyk68753 жыл бұрын
Great diy video . Looks awesome. I'd like to ask what %of tint did you use for the taillights?? Yes I agree looks much better than the spray method for tinting the taillights.
@jasonking15302 жыл бұрын
ever found out what the % was
@AlexsReviews6 жыл бұрын
Looks super thick is it not the same as window tint
@rts1596 жыл бұрын
Nope, window tint and taillight tint are different products and work differently also
@prestonweitersjr.94605 жыл бұрын
8/14/18, Super thick like the guys who do this stuff. I wouldn't, if I were you, but of course I'm not. :)
@GeronimoLogistics5 жыл бұрын
@@prestonweitersjr.9460 what % of tint is this?
@spydergs075 жыл бұрын
@@GeronimoLogistics Light tint normally just comes in light or dark. It's not the same as window tint with %.
@rga74823 жыл бұрын
Its a great video thanks. I watched another videos too and the question is that can I or need to take it off the foil after I finished it?
@bradymatheson25875 жыл бұрын
Have you every tinted the tail light on a newer Ford f-150 with blind spot monitoring? I'm wondering if it's worth trying due raised panels.
@ACIDBURN66617 жыл бұрын
Hey, just a question regarding the legality of these. I've been hearing that it's "illegal", but I've also heard it's "legal"... Something about the reflectors in the lights aren't visible. I live in Iowa so it is probably different for california.
@deviousone57316 жыл бұрын
Iowa here. I see a lot of cars down here in the southeast that have this tent. Some are even factory. You just can't have them dark like what he cleaned off. Been pulled over and received a ticket for it being too dark. State trooper said I would have been good if you can see the brake light.
@CoreyThaemert6 жыл бұрын
Here in MN anything that's on your tail light that didn't come from the factory is illegal. as far as the reflectors in the tail lights... not every car has them some cars like mine have the reflectors built into the bumper separate from the light. Iowa should also have their state statutes online too.
@jennaduvall20606 жыл бұрын
ACIDBURN6661 It's definitely illegal here in Arizona, not sure about California.
@omarm6186 жыл бұрын
Illegal in California but people still do it
@silasv49896 жыл бұрын
ACIDBURN6661 who cares about California everything there is illegal lmao
@Big_daytona3 жыл бұрын
all im gunna say is when the spray tint was just on the edges it looked kinda sick here this 1:36 id put that on my car
@Yrn.jrrr_3 жыл бұрын
That’s how the 2020 Nissan Altima’s are
@Hazie3456 жыл бұрын
Nice job ! I tell you I tried tint on my suburban and that shit isn’t as easy as you made it look ! Got frustrated and just used night shade and came out perfect
@1sniper1wolf16 жыл бұрын
I fucking love skilled craftsmanship like this. Good job fellas.
@steveent53196 жыл бұрын
Baby shampoo works best for your soapy water lol, soap soap leaves a film/haze
@FosterMedia6 жыл бұрын
Is it not easier to take the light out, must be able to get a better edge finish, no?
@cerberus5.0856 жыл бұрын
Brad Foster I was thinking the same thing.
@JZProductions7136 жыл бұрын
It's tough when you take the light out because then you need another hand or two to hold the light still as you're using both of yours in the process of applying the film
@1theheightofparadise6 жыл бұрын
Jackson Castronova wtf dude. Couple electrical clips and you literally go inside with the brake light and do it at a table
@MikesVlogss7 жыл бұрын
@premiumautostyling I enjoy watching your "How-to" videos. 💯👍
@Givingitashot4 жыл бұрын
Great video! Thank you man!
@GAMEVIDSnorwegian4226 жыл бұрын
3:07, isnt those holes there so the lights dont fog up?
@joshua74265 жыл бұрын
@@maddawgnoll nope, they are actually holes on the taillight. Manufacturers that use a specific plastic added small holes to allow water evaporation from build up, thermal expansion from light heat, and drainage. Usually cheaper made ones or models that were known to have a seal issue due to cheap products had this done to combat the issue without having to do a recall or change the way they built the parts allowing them to keep a lower cost
@joshua74265 жыл бұрын
@@maddawgnoll Maybe do a little research? Try googling and educate yourself a bit. Having worked at a manufacturing plant nearly 20+years. I can assure you especially in older vehicles and many cheaper made production models, a small hole was indeed placed in the two plastic layers for those reasons. It allowed for thermal expansion, as the car ages with cheaper plastics used in tail lights they would break down due to built up trapped heat. This air way allowed air to escape so that when it expanded it would reduce cracking. Next time you goto a car wash pay attention. You'll even see this on alot of new cars still. When it's a beautiful and hot day , a person takes their car thru a touchless car wash, gets home and notices theirs quite a bit of condensation in the rear lights. This small pin hole allows the heat of the light and the sunlight to evaporate the water and allow it to escape. With out this pin hole it would be like a water bottle in sunlight, it continuously condensate on the inside lens without drying possibly shorting out the light. You're welcome for this little bit of factual knowledge. ;)
@345chop95 жыл бұрын
Kevin Noll my Jetta has holes in the tail lights, stock lights and lenses.
@GAMEVIDSnorwegian4224 жыл бұрын
@@maddawgnoll All of our vehicles got holes in the taillights atleast and their purpose is for the light not to fog up.
@stk9285 жыл бұрын
could have done all 4 lights with that piece ;-p
@megangrover24695 жыл бұрын
Seriously...he wasted so much material
@RoscoSuperfly4 жыл бұрын
They must charge per sheet + labor. Lol probably made $300-400 bucks off this poor guy. 🤦♂️
@crf80fdarkdays4 жыл бұрын
When it costs like $20 max haha
@gldixon866 жыл бұрын
Don’t worry about the internet trolls bringing ya down nice job on the lights an good job getting out there an actually showing step by step very thorough. 2 thumbs up.
@Nathan-uh4nr6 жыл бұрын
I know you'll obviously wanna buy the tail light tint mentioned in the video, but could you use windshield tint to do these also?
@j.64786 жыл бұрын
Just subscribed and great video! Do ya'll know what % tint this is?
@spydergs075 жыл бұрын
Light tints normally come in light and dark. They don't have % like window tint.
@greenbullitt69996 жыл бұрын
The nipples can be sanded down and tail light buffed with metal Polish ... Then tint them properly and have no trace left behind ...... Liked and Subscribed ... Great channel
@lancebennett48536 жыл бұрын
Or buffing compound....then polished
@user-tj9ks1zv7k4 жыл бұрын
Can’t wait to get the taillights on my ‘17 Silverado wrapped in gunsmoke.
@ericroach73275 жыл бұрын
the film is so nice bc the lights are still visible and then when they are off it looks aggressive and clean, definitely going to use the film
@Pinkielover6 жыл бұрын
illegal in most states. any changes to factory tail lights are just waiting to get a ticket
@prestonweitersjr.94605 жыл бұрын
Dumbest (well almost) thing I ever saw. 8/14/18 :(
@stevethea52505 жыл бұрын
Prefer stock lights anyway. Easy to see, as intended.
@garymathe98635 жыл бұрын
Incorrect. There are visibility laws, so if your lights are visible from the legal distance and they are not some funky color, you're fine.
@robertct065 жыл бұрын
How would they know. Chevy has dark tinted tail lights from factory
@jjamaya015 жыл бұрын
My dad wants this done to his Ford Explorer and the sport models come with pre smoked taillights so I doubt its illegal
@joshunited6 жыл бұрын
Anyone know the song?
@ethandavis65216 жыл бұрын
Did you ever find out? I'm trying to find it.
@RetrocarStyle5 жыл бұрын
me too..shazam sucks sometimes!!
@mtbridingog90835 жыл бұрын
Trying to find it 😂
@flyboygangmejia52366 жыл бұрын
Badass hell yeah imma buy some of this product thanks for the video.
@1809erce2 жыл бұрын
Loud and clear brow….thank for your tutorial
@masscreed60836 жыл бұрын
This is also a good way to have your insurance deny a claim if you get rear ended
@hiteshvishnu86165 жыл бұрын
wow never thought of this.
@jserrano3165 жыл бұрын
Matt Thompson great point! Never thought of that
@Carwash19895 жыл бұрын
got rear ended last month, no claim, 100 free repair. hat them ultra dark even shattered lights :D
@alexs.56755 жыл бұрын
What about the bigass car itself
@joshuabechtold43185 жыл бұрын
Progressive will just take $50 off your deductible. Just went through this with my insurance.
@neilbarnett30465 жыл бұрын
Just don't. As soon as the sun comes out, your lights are invisible, the point of lights is to show light. Not mask it off.
@splooshkaboom42105 жыл бұрын
Not even true
@spydergs075 жыл бұрын
@@splooshkaboom4210 Actually it is. Even the light smoke tint on tail lights in bright sun light reduce the actual visibility of the lights by over 75%. In a shop or dim light setting the difference does seem like a lot, but once you get into bright day light it very much indeed does affect the visiblity. Hence why smoked or tinted headlights and tail lights are illegal on roadways.
@spydergs075 жыл бұрын
@@splooshkaboom4210 I have worked so many wrecks from people not seeing the tail lights it's ridiculous. (The person with the tinted lights is pretty always found at fault as well for altering the visibility of the light)
@travscott88825 жыл бұрын
spydergs07 cool bro.
@Krazy_Kenny3 жыл бұрын
Great video, thanks. Awesome job.
@SX74SI5 жыл бұрын
the stock lights look SO much better, but the job you did was great
@ArtIsLife37 жыл бұрын
is light tint is the same as window tint ?
@cooram6 жыл бұрын
hamad rashid No, different products. Window tint is made to go on the inside.
@7ruckin6 жыл бұрын
hamad rashid I've done lights and emblems with window tint