How to transfer your favorite tool brand logo onto wood

Рет қаралды 565,904

6 жыл бұрын

This video will show you how to transfer your favorite tool brad's logo (or any picture) onto a piece of wood. Basically, it's a how to video for transferring a picture to a piece of wood.
www.anrdoezrs.net/links/836668... (affiliate link)
Items needed:
logo printed on laserjet printer
Mod Podge
Foam brush
Wood
Scraper/Credit card
Patience
Disclaimer: these logos have a trade mark on them, so it is not advised to sell any item made using this method.

Пікірлер: 312

@MatthewHarrold 6 жыл бұрын

I finished some 8*10 inch black-heart sassafras blocks and transferred pictures of my nieces/nephews to them as Xmas pressies for the family a few years ago. Mod Podge worked really well, I should have spent more time clearing away the paper, but a half-finished job adds somewhat of a patina that worked. My 12yo daughter told me about it. Circle of life. Thanks for the video.

@ToolReviewZone 6 жыл бұрын

+Matthew Harrold lol, thanks for the comment bro

@carolinasart9051 3 жыл бұрын

This is so cool! I would have never thought this would work. Thanks!!!

@tomorrowstools2159 5 жыл бұрын

It’s so smooth! I can’t believe that does that! Super cool! I’m going to try this out.

@ToolReviewZone 5 жыл бұрын

So smooth! Yeah, this is a cool little trick here bud. Make sure to let it dry for a day before taking it off.

@ralphb.3802 6 жыл бұрын

Good video. This technique on a wood project I was doing. I wanted to put a “brand” on the piece. The piece was stained by didn’t have polyurethane coating yet. I tried the heat transfer method that I saw on other videos but that didn’t produce good results. Mod Podge worked best, it gave the brightest transfer.

@ToolReviewZone 6 жыл бұрын

Hey Ralph, thanks for the comment. Yeah it definitely does a really good job

@jamesbradford856 4 жыл бұрын

use polycrylic instead of mod podge. Put poly on wood, place picture on top of poly. shouldn't have to wait but 1.5-2 hours. use toothbrush and warm water to get paper off. Bam! done in half the time

@retiredtvbear9383 5 жыл бұрын

I saw a video this morning that uses the backing sheet from mailing labels. (These were a sheet of two labels)The print is made on the shiny side of the backing. Next step is to apply the Modge Podge or whatever you use on the wood, (DON"T try to apply to the shiny side of the paper) Lay the printed side down just like your video shows. Make sure to squeegee all the bubbles out. Let it dry and lift the backing sheet off. No rubbing ad risking removing the toner.

@ToolReviewZone 5 жыл бұрын

Nice. Do you have a link for that Bear?

@Trim01 5 жыл бұрын

That man's comment NEEDS to be pinned Plus here's the link below kzfaq.info/get/bejne/np12fseImtTIfKs.html

@danburch9989 7 ай бұрын

I believe they still make inkjet/laserjet photo paper. It also as a shiny side for printing photos. I wonder how it would work.

@StefanosBand 6 жыл бұрын

Excellent job !!!! Best transfer method for laser prints !!!! Thank you for sharing !!!!!

@ToolReviewZone 6 жыл бұрын

+StefanosBand my pleasure. Thanks for the great comment!

@AphoniaMute 5 жыл бұрын

To get the paper off much faster without harming the image just use water and a toothbrush... So much faster and has no effect to the image.

@ToolReviewZone 5 жыл бұрын

Nice!

@mbforwood6926 6 жыл бұрын

BEEN WAITING TO TRY THIS.......GOING TO DO SO IN A WEEK OR SO - BEEN WORKING ON A WOODSHOP - HOPE IT WORKS!! SOME GREAT TIPS - ESPECIALLY ABOUT THE LASER-JET - HELPED PREVENT THE FIRST MISTAKE!!

@alecvansiclen4035 5 жыл бұрын

HOPE IT GOES WELL

@caipingsu1023 6 жыл бұрын

Thank you for the video. Easy to follow

@ToolReviewZone 6 жыл бұрын

+Caiping Su any time. Thank you for the comment!

@sowards80 6 жыл бұрын

Inkjet printers can also yield the same quality, and using polycrylic for your transfer works very well.. Great video! Nice job!

@sami6577 5 жыл бұрын

Twisted Trees Farm hi can you tell me how to tranfer using inkjet

@Mike-ib7um 3 жыл бұрын

I did the polycrylic with inkjet and the image rubbed off. Does anyone know why?

@Rayztubes Жыл бұрын

@@Mike-ib7um Same here. I experimented with different drying times etc. The ink always rubbed off.

@Mike-ib7um Жыл бұрын

@@Rayztubes I gave up on it. Nothing really works.

@CeeStyleDj Жыл бұрын

@@Mike-ib7um I wonder if there's a simpler way to do it like just having a decal printed out of a logo or something... And you can just transfer the decal. Don't know, seems easier.

@Brian-gw6di 5 жыл бұрын

This is pretty damn cool. Im going to try this with a Caterpillar logo for a display stand i want to make for my CAT models

@forceofone23 6 жыл бұрын

Happy to see a technique I can use with my laser printer. Much better quality. I still use the wax paper/ink jet method for a rustic look.

@ToolReviewZone 6 жыл бұрын

Hey Force, yeah that would work well for rustic. Thanks for the comment bud!

@mannyanddeleanaramirez2023 6 жыл бұрын

Great video. I do Sublimation, and learned from you how to save more money. Save money means MAKE MORE MONEY. :)

@ToolReviewZone 6 жыл бұрын

Manny N Deleana Ramirez that's awesome buddy!

@dreamkiss4u 6 жыл бұрын

you can use Minwax Polycrylic water based and you only have to wait for 2 hours to take it off and less woek cleaning it up the paper comes off faster and picture has more detail

@ToolReviewZone 6 жыл бұрын

+dreamkiss4u nice, I'm going to try that!

@ripstick2217 6 жыл бұрын

Yes - this.

@viktorperalta3090 4 жыл бұрын

What is that kind water or where can i get that

@phatbastard7350 4 жыл бұрын

@@viktorperalta3090 imported from Canada, The water is very kind

@kirubananthan57 4 жыл бұрын

@@phatbastard7350 hahahaha

@TheWoodWerker 6 жыл бұрын

Yup Yup! Thanks for Sharing! Have A Super Week!.....Gus

@ToolReviewZone 6 жыл бұрын

Any time Gus, and thanks for the comment!

@deborahpitts03 2 жыл бұрын

Awesome job.

@kiwichew8884 5 жыл бұрын

would it work if the wood already has a coat of polyurethane/varnish on it?

@DizzyDGotti 6 жыл бұрын

Great video! Thanks man.

@ToolReviewZone 6 жыл бұрын

any time!

@pitman2911 5 жыл бұрын

Great video. 👍

@oscaruribe1542 4 жыл бұрын

Gran trabajo, gracias por los tutoriales. Qué tipo de papel usa. Muchas gracias

@krylissnorwind7528 5 жыл бұрын

This seems to work pretty good! I tried Mod Podge Photo transfer and after it dries like a thick white paint on areas that are not the picture and it doesn't come off. I'll have to try the Mod Podge Matte being as it's designed to dry clear.

@wildlifeathome 3 жыл бұрын

Every brand loves free advertisments, still a good way to transfer prints.

@cusebasketballfan 6 жыл бұрын

I have a Epson R1800 printer but I was thinking about a laser jet printer. Which do you prefer? I have a ton of different heat transfers paper,a commercial heat press but I haven’t figured out how to design an image that’s in my head onto a program. What’s the easiest software to create designs? Thank You Jim

@mururoa7024 5 жыл бұрын

Try water based polyurethane. It's thinner than Mod Podge or any gel based solution. It makes it easier to remove the paper and leaves a smoother finish.

@davidruiz5383 Жыл бұрын

Hi, can you explain how it works, I want to do what the man in the video is doing with a picture 14"x14", using your method. can you help. Thanks

@mururoa7024 Жыл бұрын

@@davidruiz5383 It's exactly the same method as shown in the video, but you soak the print in water based polyurethane instead of the product he's using. It's the same water based polyurethane you would use for the top coat on any project, so it's easier to get in most countries. After you rubbed off the paper (do not use sand paper!) and only the print's pigment remains, you can apply more polyurethane to finish the surface. Make sure you really rubbed off all the paper otherwise it'll be visible after everything dries.

@davidruiz5383 Жыл бұрын

Thanks, have a great day.

@ericl899 6 жыл бұрын

Very interesting!!

@beetle8686 3 жыл бұрын

is the ridgid lettering white or the same color as the wood? i cant tell. if so when you use white does it fade away to the original wood ? looking to do this but want the white areas to show the wood color. also if the board is painted first does it still work? thanks!

@trashman6489 5 жыл бұрын

Can I use top bond gum?

@soogood_food 5 жыл бұрын

Super cool

@JADNCK 4 жыл бұрын

Does this work on already clear coated wood? Say I have wood that’s been lacquered. Can I put an image on top of that with this method?

@marhabahaji 4 жыл бұрын

I have the same question.

@667hodge 5 жыл бұрын

Do you have to apply the modpodge to the wood?

@zaccomusic 3 жыл бұрын

amazing contents friend

@ferrykacik3548 6 жыл бұрын

what paper

@just1lifexx11 6 жыл бұрын

Nice

@romanshop797 4 жыл бұрын

What kind of paper? Please!

@YesImhymn 4 жыл бұрын

The fact that it was slightly crooked was killing me! Great video though.

@mikeknoeber6507 4 жыл бұрын

Ditto

@lgtaylor1 6 жыл бұрын

I have done this many times with my inkjet printer (epson expressions 310). The only difference is that I usually use gel medium to do the transfer.

@ToolReviewZone 6 жыл бұрын

+Linda Taylor hmmmm, maybe I can try that. It comes out very dull with the Mod Podge, but my printer in not the best out there either. Thanks for the info!

@lgtaylor1 6 жыл бұрын

No problem, but I just did some more research and found that my printer uses pigment inks and that is why. Who knew?!

@AmericanBulldogRocky 4 жыл бұрын

What kind of gel medium do you use exactly?

@priyaskitchen1584 2 жыл бұрын

With the gel medium, is it ok to use the regular printer paper?

@nikkikiser9031 2 жыл бұрын

@@priyaskitchen1584 yes

@ortholoc 5 жыл бұрын

I see you're not using actual image transfer gel. I thought the bottle had to have that printed on the front. I've been searching for image transfer medium only. None of the local stores carry "Image transfer medium" you have to order it online. So can I use any mod podge gel?

@user-ht6qt6zv1c 2 жыл бұрын

Does this work on spray painted metal too ?

@josephgarcia3767 5 жыл бұрын

What grade sandpaper do you recommend for sanding the wood to a smooth quality?

@ToolReviewZone 5 жыл бұрын

1000 grit should work out good for you Joseph. Will get it nice and smooth for you

@leekahyao9680 6 жыл бұрын

Can transfer onto metal ？

@yams8390 3 жыл бұрын

How long will ink last on wood?

@catcon3997 4 ай бұрын

You can do the same thing with Minwax Polycrylic - same process.

@barbsvoboda9634 3 жыл бұрын

Does modge podge fade if I put outside? Will it weather well?

@JN-vi9iv 4 жыл бұрын

My graphics and logos have white and white text in them that I need transferred on the wood not transparent like your text was . How do I do that

@kitankin 3 жыл бұрын

Does this work with wood painted black?

@leecassin 4 жыл бұрын

Does this work on rubber

@MilkWithKni7es 5 жыл бұрын

Qucik and to the point. Not 20 extra minutes of dragged out dialogue. Thanks

@ToolReviewZone 5 жыл бұрын

Thanks spiderr!

@jogmas12 Ай бұрын

How did u get the mirror words?

@abdullahbhatti5824 3 жыл бұрын

What paper do u use and where to buy

@guyh.4553 4 жыл бұрын

Plastic $1 Store scraper maybe? I've been watching these and thinking about it. What about rubbing off with a wetted sponge?

@kiafrancedoronila3161 2 жыл бұрын

What paper did you use?

@praveen8 2 жыл бұрын

Which paper for printing?

@pekesrepose7363 4 жыл бұрын

inkjet works just as well. hands down 100%

@samettamthompson 5 жыл бұрын

Agreed

@allham01 6 жыл бұрын

Will this process go on matt paint?

@ToolReviewZone 6 жыл бұрын

+Andrew Hallam yeah it will work, but the darker the paint, the worse it starts looking

@callumpoole6687 5 жыл бұрын

Is laser jet a type of paper

@whynot5177 4 жыл бұрын

This thing that looks like glue is it glue ?

@nyacoustics8373 4 жыл бұрын

is the image when its printed on the laser jet just printed on standard laser jet paper or is it some other type of paper?

@ToolReviewZone 4 жыл бұрын

Just regular paper

@victorburgos4224 Жыл бұрын

Can you transfer to Walnut?

@uzzielanderson7871 4 жыл бұрын

Hey, the part you skipped out to rub out the film what exactly did you do cuz I've been using water and its still there

@ToolReviewZone 4 жыл бұрын

Just water is what I used

@brucegrimes2184 4 жыл бұрын

inkjet works too ive done it

@AmericanBulldogRocky 6 жыл бұрын

mod podge = white glue at 10 times the price

@greysonwayne1741 5 жыл бұрын

Can you add epoxy on top of the modge podge?

@ToolReviewZone 5 жыл бұрын

Yeah that would work

@TreasuredKreations 5 жыл бұрын

Can you do this with sublimation ink instead of laser jet?

@ToolReviewZone 5 жыл бұрын

I'm not really sure Sheena. Sorry

@HuskyMoving 4 жыл бұрын

Does anyone know if this would work on double wall cardboard? Also, comments said the color white does.not transfer? If that possibly because there was actually.no ink used to represent white on a white sheet of paper? Would printing a "white" using a slightly off color white that required ink work? Does anyone know the recipe for homemade mos podge???

@CL_Creatives 5 жыл бұрын

Can it be done on painted woods

@ToolReviewZone 5 жыл бұрын

If it's a light color it will work, but won't show up very well o. Darker colors

@gotbigdreams.5257 3 жыл бұрын

what if i cant find those mod podge in my country? is there any brand i can use? help me thx..

@nuclearexplosion5841 5 жыл бұрын

how do you get backwards pic like that

@ToolReviewZone 5 жыл бұрын

I just placed it in power point and flipped it. There are other methods as well, but that's what I do

@AmericanBulldogRocky 4 жыл бұрын

Can I spray a lacquer top coat over the logo after it's done?

@ToolReviewZone 4 жыл бұрын

Sure

@wheres_bears1378 Жыл бұрын

Is this permanent I am looking to apply on wooden bowls

@NLDHGRockStaR 6 жыл бұрын

i have a HP Photosmart 6510 inkjet printer, and it does work ,why keep everyone telling cant be done with inkjet?

@ToolReviewZone 6 жыл бұрын

+NLDHGRockStaR It comes out to dull

@NLDHGRockStaR 6 жыл бұрын

never had the idea it was dull, but maybe the type of ink here is slightly different here in Europe.

@ToolReviewZone 6 жыл бұрын

+NLDHGRockStaR could be. Many others experience the same thing, so they also push for laser jet. Could even be the printer

@allancollins1937 6 жыл бұрын

NLDHGRockStaR I

@armandfischer 6 жыл бұрын

Very interesting video! Thanks. How did you manage to have letters in the color of the wood instead of "white letters"?

@ToolReviewZone 6 жыл бұрын

+Armand Fischer thanks for the comment. I have come to learn that only the only transfers, not the paper color. If it was white ink on the letters it would have, but just the paper will leave the wood looking natural

@leeguitarmcr 6 жыл бұрын

Because white is not printed with a CMYK printer. White is on the image as you can see in the video but in reality the letters are blank with no ink.

@joe427ak_ground 2 жыл бұрын

Could I use a hair dryer instead of the 24 hours or does it need time to soak in

@ReformationsGlassArt 5 жыл бұрын

has anyone tested laser jet on normal paper vs laser printer paper vs freezer paper vs transfer paper ?

@eduardogutierrezrestrepo4463 6 жыл бұрын

Hi my name is Ed, very intersting video. Question, can I do this process on particle board type of Wood, they also call it fiber board . It looks pretty much like Wood but recycle. Thank you.

@ToolReviewZone 6 жыл бұрын

Hey Eduardo, it should be ok, but need to makes sure that all of the paper comes in contact with the wood. Sometimes that type of board may no be completely smooth

@sr-de5nz 5 жыл бұрын

Can I use normal ink jet printer?

@ToolReviewZone 5 жыл бұрын

Regardless of what others here have been saying, it does not come out so well

@harshana790 2 жыл бұрын

Whats wood glue

@motivationalspeech6325 3 жыл бұрын

What is paper ?

@zahabiagadiwala8929 4 жыл бұрын

Hi...which mod podge did you use? Is it Matte finish? I have 1 but its plaid but not sure if i will get the same result.

@ToolReviewZone 4 жыл бұрын

Hello, I cant remember off hand, but I have a link for the kind I used in the description 👊

@zahabiagadiwala8929 4 жыл бұрын

Tool Review Zone Thanks

@arturmoreira9716 6 жыл бұрын

Awesome brother, thanks for share. What is this "mod podge" it is like a acrylic varnish? Bye

@ToolReviewZone 6 жыл бұрын

Hey Artur, it's more like a white glue texture. I've tried the acrylic and did not come out that well. You can get the mod podge at Walmart, target or Amazon Thanks for the comment!

@stickyprickle 3 жыл бұрын

Mod Podge is a watered down PVA glue

@alfredoibarra9825 4 жыл бұрын

You can do it with pictures as well?

@ToolReviewZone 4 жыл бұрын

Yep

@JhunRageRebucas 3 жыл бұрын

Can i used woodglue or any white glue sir?

@pescaycazasinfronteras5031 5 жыл бұрын

What kind of paper do you use to transfer wood????

@ToolReviewZone 5 жыл бұрын

I just used regular printer paper

@johncleggkreative 6 жыл бұрын

what kind of paper?

@ToolReviewZone 6 жыл бұрын

Just regular printing paper

@happydragonph7814 5 жыл бұрын

What kind of paper this you use?

@ToolReviewZone 5 жыл бұрын

Just regular printer paper

@JN-vi9iv 4 жыл бұрын

You said that you want to cut the logo out because if you don’t the white from the paper will transfer. Well then how come the white letters from the logo did not transfer white it transferred transparent

@Pvt213 6 жыл бұрын

I don't understand the why there's 16 thumbs down at the time of posting this. I thought it was fantastic. I'm eventually going to come across a project where I'll want to do this. Does anyone know if this method can handle photos?

@skydrones2012 6 жыл бұрын

Pvt213 use the wax printer label method

@shaunbarnett2972 5 жыл бұрын

Just use transfer paper. Any paper with a layer of wax on it will do so the ink doesn't soak into the fibres of the paper but instead sits on the surface ready to be easily transferred to another surface.

@arsitayyab2208 6 жыл бұрын

You are subscribed but i have Questions are you using normal paper or Transfer paper? Also can we use PVA Glue?

@ToolReviewZone 6 жыл бұрын

Normal paper buddy

@FishingwithCristina 6 жыл бұрын

I just subscribe to your Channel I have a question what program do you do to invert the image

@ToolReviewZone 6 жыл бұрын

+fishing Miami Florida +fishing Miami Florida All I use is PowerPoint really. Hope this helps!

@driver209 6 жыл бұрын

fishing Miami Florida send it to STAPLES and just have them invert it. They can do it with a touch of a button.

@fatihsuzer2598 6 жыл бұрын

Is it necessary to print it by laserjet printer ?i have inkjet printer

@ToolReviewZone 6 жыл бұрын

Honestly Fatih, it will work ok but not as good. The laser comes out much brighter and more defined

@rodrigopadillamanzano1434 6 жыл бұрын

thst is like glue ?

@ToolReviewZone 6 жыл бұрын

Ye was and no really. I looks just like Elmer's, but dries a lot differently. Its definitely different

@mertkars1463 5 жыл бұрын

what kind of paper is it? normal a4 paper?

@ToolReviewZone 5 жыл бұрын

Just standard cheap paper

@online12plus 5 жыл бұрын

does it work with your second favorite tool brand on wood?

@ToolReviewZone 5 жыл бұрын

Haha nope. Great comment though

@Annie261. 4 жыл бұрын

Upside down? Don’t you mean backwards?

@tiffanynelson8067 3 жыл бұрын

I did mine upside down & felt so dumb 🤣

@knight7se7en 5 жыл бұрын

Will this work on wood that’s already been painted?

@ToolReviewZone 5 жыл бұрын

Depends on the color. If the paint is to dark, it won't stand out at all

@knight7se7en 5 жыл бұрын

Tool Review Zone: the wood is painted navy blue and I wanted to lay down gray or white text

@ToolReviewZone 5 жыл бұрын

Yeah, probably not going to work buddy. The white does not transfer, and the blue with probably be to dark. You can try it, but don't think it will come out bro

@louiemoreno8339 6 жыл бұрын

Hey my name is Louie I've been watching your videos. Jet ink from Kinko does not work

@ToolReviewZone 6 жыл бұрын

Hey Louie, Correct, it has to be a laser jet

@drewjohnson4673 6 жыл бұрын

I think the printing reference is “ reversed” not printed upside down.

@thephoenix602 5 жыл бұрын

You said the white would transfer on to the wood but the white in the lettering did not?

@ToolReviewZone 5 жыл бұрын

Mistake

@whitneyboecker6111 6 жыл бұрын

Is it possible to do this on a stained wood?

@ToolReviewZone 6 жыл бұрын

Hi Whitney, You can add this to any surface, but I noticed that the darker paints/stains don't come out as nice. If you go with a lighter stain, you will be fine.

@whitneyboecker6111 6 жыл бұрын

Thanks so much for the help and for the speedy response!

@ToolReviewZone 6 жыл бұрын

Any time, Good Luck!!!