Viral Tips and Tricks That Every Woodworker Should Know!

Рет қаралды 127,888

Күн бұрын

As Makers, there should be no secrets. In this video I'll be covering some of my most viral tips and tricks that in total have had over 250 Million views.
These are game-changing woodworking hacks. Throughout my career, there have been certain tricks I've learned that I still use every day. No need to learn the hard way!
★ Plans! All plans include exploded views, cutting layouts, and easy-to-follow step-by-step instructions.
www.matthewpeech.com/
★ The New Outdoors Channel! / @pale-horse-outdoors
★ Support the page and join the community!
/ matthewpeechwoodworking
Access to behind-the-scenes content, plan of the month, Q&A, Early access, and tons more!
★MPW DISCORD! / discord
Our Discord is a place where you can chat with like-minded makers, share your brags, and ask questions about anything woodworking.
★ THE BRAG BOARD! Share your brags and view brags from other makers!
The brag board has its own discord channel where you can post, view, and comment on builds. Just follow the Discord invite link above!
★ Subscriber Discounts! (Affiliate links help to sponsor the content)
-------------------------------
The Most Comfortable Mask I’ve Ever Worn!
RZ Masks
15% off with promo code: PEECH
www.rzmask.com/m3
-------------------------------
Love my hearing protection!
AXIL Electronic Hearing Protection
Get 15% Off With Promo
Code: MPWOODWORKING
GSX 2.0
goaxil.com/pages/gs-extreme-a...
--------------------------------
MaKRS
Stain Pad - amzn.to/4aL7Aa8
Stain Sponge - amzn.to/442ty5A
Tack Cloth - amzn.to/4aG9XL2
--------------------------------
★Proudly Supported By / Partnered With:
Carhartt - Check out the latest Deals!
carhartt.pxf.io/NKWbyO
Kreg Tool - www.kregtool.com
RZ Masks- www.rzmask.com/m3
---------------------------------
★Links to tools you may see in my shop (Affiliate links help to sponsor the content)
Dewalt 1 1/2” forstner bit amzn.to/3u25YIX
25pc Hanger bolt amzn.to/3SAEuna
T nut amzn.to/3u8Sv1Y
Router amzn.to/3UiqJL1
Hammer amzn.to/3ru3YDU
CA glue amzn.to/3bu8RbR
Glue bot amzn.to/3cnVM44
Kreg Pocket-Hole Jig 720 PRO, Blueamzn.to/3trFHkt
Dewalt Jig Saw amzn.to/3tGmkUS
Tin snips amzn.to/3UhSMdn
Tape measure amzn.to/3tF1IME
Pencil amzn.to/3PePbHX
Dewalt cordless orbit sander amzn.to/3qmYc7t
Swanson Square amzn.to/3TgUgSx
DEWALT 20V Max Cordless Drill Combo Kit, 2-Tool Drill Driver/Impact Combo Kit
amzn.to/3Kh5OAE
Dewalt Brad nailer amzn.to/3cEjysY
Dewalt Brad nails multipack amzn.to/48IfRdE
Glue bot amzn.to/3wHSFKT
Titebond III Exterior wood glue amzn.to/36HHBEx
DEWALT Compound Miter Saw- amzn.to/3fqkIWX
3M Cubitron II Mixed Pack!
I finally found it!!! - lddy.no/1i8ua
Check out my Amazon Page for links to all the tools you see throughout my shop!
amazon.com/shop/matthewpeechw...
------------------------
Instagram: / matthewpeechwoodworking
TikTok: / matthew.peech
Facebook: / primitivemillworks
KZfaq: / matthewpeechwoodworkin...
Let’s Work Together
www.matthewpeech.com/
#DIY #tips #woodworking #palletwoodprojects #craft #woodworkingtipsandtricks #tipsandtricks #build
00:00 Easy Ways To Save Your Build
00:30 Dents Can Be Fixed!
03:49 No Zero Clearance? No Problem
05:04 This One I'm Stealing
07:40 Dust Collector... Not what your thinking.
09:23 Mitered Corners Clamped The Easy Way

Пікірлер: 292

@chrisnash2154 5 ай бұрын

Man! That corner clamp jig blew my friggin mind! It’s so simple!

@MatthewPeechWoodworking 5 ай бұрын

Sometimes solutions are so simple we overlook them.

@duelette 5 ай бұрын

I am 65 years old now but I worked at a cabinet company called Baker furniture in my teens in Holland Michigan. In the fine sanding department. We used to just spit on the dent in the furniture and used the iron. I have been a carpenter since but I still learn from your videos! Retired now but still building hideaways for wealthy people. I really appreciate your videos! Thanks Brad.

@MatthewPeechWoodworking 5 ай бұрын

Thanks so much Brad! I can't tell you how many times people have called bs on that trick.

@tremont2k 5 ай бұрын

"We used to spit on the dent" 😅

@CaptainHowdy420 5 ай бұрын

You just saved me a ton of money on corner clamps. Those jigs are worth their weight in gold! I absolutely love your videos and highly recommend them to anyone doing woodwork or DIY stuff. Keep up the great content.

@MatthewPeechWoodworking 5 ай бұрын

Glad to help and thanks for the support!

@connielea1896 5 ай бұрын

I love the tip for your 45° jig. I'm 72 year old grandmother just got back into woodworking after many years away from it. I will gladly use this tip and many others, if for no other reason than to prove that an old dog can learn a new trick (tip).😅

@jeramiahshastid6041 5 ай бұрын

72yr old grandfather here. I had my granddaughters in my wood shop and they learned so much while thinking it was fun. Some of the best times in my life. I’m back to woodworking again after years away. SEMPER FI

@TheFeralFarmgirl 5 ай бұрын

I'll have to make those jigs! I know the rest of those tips from working at a wood shop, but they had professional miter clamps. I'm too cheap to buy those, so these will come in handy. Also, bonus tip about saving sawdust is, you can use it around the house too. Chipped cabinets or molding? No problem. Tiny crack or gap appearing in your wood flooring? Solved. Bust out a corner of your husband's desk while vacuuming? Never happened. 😆😆😆

@davidguinta4550 5 ай бұрын

Peech comes thru again...even on Sunday!! Thanks for the helpful tips!

@MatthewPeechWoodworking 5 ай бұрын

You bet!

@georgeparker7409 5 ай бұрын

As a "in house" furniture repaiman with 50 odd years of experience, (new patron member) a couple of short tips. A small dent in wood if you are in some ones home is to use a drop of spit. The enzimes in it seem to expand the fibers slightly and fill the dent. Also carry a small wood burning iron on the job for heat if needed. We also make custom picture frames from 200 year old Maine Pine salvaged from old barns/houses etc. Spring clams (cheap from NEMU) for holding the joints while gluing. quick/easy. Your experience in this work and passing along the knowledge is a welcome treat. Good luck and thanks.

@MatthewPeechWoodworking 5 ай бұрын

Thanks for sharing! I've known instrument makers that have used this trick for years. Reclaimed pine is my jam. I've worked with it my whole life. People underestimate it as they compare it to new pine. And yes, spring clamps are great as well... Just have to be careful with placement.

@georgeparker7409 5 ай бұрын

Hi Matt: I was just on LOWES and found HOMESTEAD WALL PANELS". Very cheap and I just made some picture frames . Just about the same price as pickets.@@MatthewPeechWoodworking

@donaldjclaxton 5 ай бұрын

The miter clamp bit was most helpful. The ironing trick looks pretty good. Looks like the dowel project isn't quite precise, but close. Not quite sold on it, but will definitely give it a go. Thanks Matthew,. Hope you're having a fantastic 2024 so far!

@MatthewPeechWoodworking 5 ай бұрын

Thank you and you as well.

@janesserearden7770 5 ай бұрын

Great video! Thank you and happy New Year!

@lindacurtis-smith9835 5 ай бұрын

Once again, you've made my day. Yesterday's forecast was filled with cold, wet, and high levels of frustration. Today looks better. On advice from Pops, I purchased my shop iron ($13) from our local French establishment, Tarjay. I'm ironing veneer to some dining room chair legs. Fingers crossed. Thanks again Matthew!

@MatthewPeechWoodworking 5 ай бұрын

Rock on!

@kevinmclaughlin4569 5 ай бұрын

very helpful love to watch and learn

@edwardvanvalkenburg3254 5 ай бұрын

Yep learned two things to teach to other family!!! The tape and dowels and the clamps. My whole front room will be clean soon now!!! Thank you and still Have a Great Year.

@gertkroucamp3605 4 ай бұрын

With my first project, chest of drawers. Pressed wood build. Sections were broken off/out (corner). Sawdust and wood glue made an excellent compound to build it up again. Need to be pressed on most all sides. It work great. Excellent wood filler option.

@dawnawerbeski825 3 ай бұрын

You are now one of my three top fav’s. thanks so much on behalf of all new woodworkers 😀

@Ron-FabandBuild 5 ай бұрын

Always great information and tips on your channel. Thanks Matthew .

@latenightwoodworker3283 5 ай бұрын

Love them all. Thanks

@mjoe877 4 ай бұрын

Awesome tips! Thanks for sharing!

@mattbendzinski4945 5 ай бұрын

Awesome as always Mr. Peech. Many thanks for the great ideas especially the corner clamp.

@MatthewPeechWoodworking 5 ай бұрын

Very welcome

@michaelheyward7668 5 ай бұрын

Awesome! Thank you for sharing...

@stephenking1218 5 ай бұрын

OMG, thank you for the miter clamp idea! I just finished a bathtub tray project for my beloved that had me clamping 45 degree miters for the main rail. I'd bought some of those special finger-activated corner clamps, and upon use I found out they're not worth a crap. I will definitely make and use this jig (out of pallet wood, of course) going forward.

@user-no7lg7nz7h 5 ай бұрын

Thanks. I love the corner clamp and dowel trick. I’m making something this week and they will help!

@MatthewPeechWoodworking 5 ай бұрын

Great!

@dougstultz1206 5 ай бұрын

Love the tips Mathew! Got your plans for the planer table Put it together and it works so well! No more working on my knees! Thank you 🙏🏼

@MatthewPeechWoodworking 5 ай бұрын

No worries! I designed that transforming table to solve a shop problem. So glad you enjoy it!

@dalesuggs3658 3 ай бұрын

THANK YOU VERY MUCH FOR SHARING YOUR KNOWLEDGE, TIPS, ADVICE AND WISDOM. THESE TIPS TRULY HELP WITH MY PROJECTS.I HAVE A VERY SMALL SIMPLE SHOP. GOD BLESS YOU AND YOUR FAMILY

@mynightoff 5 ай бұрын

The simple corner glue up jig is an excellent idea. Thanks for sharing and keep up the good work.

@MatthewPeechWoodworking 5 ай бұрын

You bet!

@lorihughes8873 5 ай бұрын

Great tips Matthew!

@rayansandysteward7474 4 ай бұрын

Thank you Matthew, great video. Definitely some things that I'm going to try.

@ventureoutdoorswithkirk 5 ай бұрын

Nice tips. Great for people starting out, very cost effective.

@MatthewPeechWoodworking 5 ай бұрын

Thanks for the support.

@skippylippy547 5 ай бұрын

Wonderful tips and tricks! Thank you. 🥰

@keithsanville2361 5 ай бұрын

Cool and Thanks!

@willleskin3360 5 ай бұрын

Love the corner clamp! One trick that has saved my butt is if I drill a hole just slightly off where it needs to be and there’s no way to redrill the hole just a little bit to the side of it without it caving into the first hole. Wood filler won’t work in that situation, but a dowel will. I just fill the bad hole with a dowel and glue, let it dry and then I can redrill right next to it without the new hole caving in.

@sueb4154 5 ай бұрын

You can even use a golf tee in smaller situations, Saved me a lot of trouble when my Fence pro messed up the swinging brackets on my gate.

@willleskin3360 5 ай бұрын

Nice

@MatthewPeechWoodworking 5 ай бұрын

Very nice tip! I've use the golf tee trick on stripped screws.

@cindyabbott780 5 ай бұрын

i absolutely love your videos. I dabbled here and there with projects for a few years prior to 2020, I lost my husband, we were 49 years old. After he passed, Woodworking became a stress relief for me. Today, I cannot fit a single car in my 2-car garage! I still have a router and circular saw that intimidate me, I'm not even sure what kits or plates to use for the router. I can go into a store and never gain knowledge on it.....BUT, I will eventually get there. I would LOVE to know how you made the tall chest of drawers with the jagged split in the middle! That is so fascinating! Can you share your Patreon link? I'd love to become a member! Thank you for every single video, you are a wealth of knowledge and I look forward to learning more! Cindy from Raleigh, NC

@donaldlemoine3032 5 ай бұрын

Always great information Mr Peach!

@WomanUnfiltered 5 ай бұрын

As always, I've learned even more from you. The mitered corner jig & dowel trick will be very helpful in pushing me to do more. Those have been fears I've avoided. Thanks!

@MatthewPeechWoodworking 5 ай бұрын

Great to hear!

@scottromero2091 5 ай бұрын

My dad was a finish cabinet carpenter. He used to call the little hammer marks that I left behind when I "helped" him, elephant tracks. Brought back memories. I'll bet he would have loved to know about the trick with the iron. Good video.

@AlleyAgent 4 ай бұрын

Hey Matthew, I, at 50 have been a carpenter most of my life starting with a cabinetry course that was offered in my high school as an elective course, they also had a building constructions course, that began at layout and design, followed by blueprinting and planning, to everything from flat concrete and footings to finishing out with crown molding. I took all the trade courses offered by my high school knowing full well I was no collegiate scholar ( yes I googled the spelling! LOL). I have to tell you, that the Iron and wet towel (I never put just water on any wood) trick was one of the first carpentry "Hacks" I ever learnt..(yeah I just did) . I also later in life as I listen to woodworking and construction related podcasts have picked up a few new tricks or Hacks.. Like for instance, if a small trim screw like for a door hinge gets over tightened and stripped, I use a simple wood golf tee to fill the hold to put the screw back into. Ultimately, Thank You for sharing info like this.. we as older craftsmen need to push the trades and how easy it really is to be a good craftsman with less effort then they actually imagine it would be..

@richardandrade9418 5 ай бұрын

You're always bringing me back into wood working my friend thanks for your content. I work fulltime at a really good job but i love this so much and you inspire me to make time for it. Thank you!

@MatthewPeechWoodworking 5 ай бұрын

Right on. Always make time for the things you love... You never know... it could grow into something big!

@filldev 5 ай бұрын

I really like the way you did that miter clamp. Definitely making some. Thanks for yet another great video!

@stephencoyne310 5 ай бұрын

Informative thanks

@kimhavey7850 5 ай бұрын

Love the mitered corner jig!! Will be making at least 4 of them for a upcoming project!

@MatthewPeechWoodworking 5 ай бұрын

They are great to have around!

@madbomber40 5 ай бұрын

Nice . I really love the way you describe this .

@1Tibs1 5 ай бұрын

Thanks! Smart.

@mariem5990 5 ай бұрын

Thanks for the great tips and video

@beerbottlebaby 5 ай бұрын

Really enjoy these types of videos, it's always good to learn something new that is actually useful. Keep em coming!

@MatthewPeechWoodworking 5 ай бұрын

Thanks, will do!

@imsowright90 5 ай бұрын

Very useful information. Thanks for sharing.

@MatthewPeechWoodworking 5 ай бұрын

My pleasure

@ronswoodshack 5 ай бұрын

Great tips!! Thanks Matt!

@MatthewPeechWoodworking 5 ай бұрын

You bet!

@MultiKENB 5 ай бұрын

Brilliant tips 😊

@samsanderson7159 5 ай бұрын

Dude, you are so helpfull and inspiring. I actualy seen the mitre clamp short a couple days ago. I'm definitely going to be making a few. And the dowel trick will work for a lot of things that don't need to be auper precise. I love the content. I watch a couple other woodworkers but you are by far my favorite. Really looking forward to seeing what's on the build list for valentines day and spring.

@MatthewPeechWoodworking 5 ай бұрын

Thanks man. That's what I'm here for... and plenty more to come!

@jimrosson6702 5 ай бұрын

Great tips as always Matthew thanks for sharing. Definitely going to make a couple of those 45 degree clamps great idea

@normancurd8719 5 ай бұрын

Love the clamp idea!!!!

@mikebirnie6381 3 ай бұрын

Thanks Dude...awesome tips as usual...appreciated

@bfelton427 5 ай бұрын

Keep the tips and tricks coming. Loved it!!!

@ClaytonsWoodArt 5 ай бұрын

Great content Matthew!

@aerialrescuesolutions3277 5 ай бұрын

Excellent, thank you. JIm

@alwebster9052 5 ай бұрын

Love the corner jig.

@greghurt4944 5 ай бұрын

Love the 45 degree clamp jig... wonderful idea Matt

@MatthewPeechWoodworking 5 ай бұрын

Glad you like it!

@blackwaterprepper4254 5 ай бұрын

I don't have an iron so all of the stuff I make with dents and scratches, I just call it rustic. 🤣🤣🤣🤣🤣🤣🤣🤣🤣

@MatthewPeechWoodworking 5 ай бұрын

Call it rustic chic and charge double.

@shawnr771 5 ай бұрын

I start out with mostly scrap wood. Its all rustic. I dont own a level that isnt bent.

@sweetpeas8206 5 ай бұрын

Black Water? You are my kinda woodworker! 😉

@fdort3971 5 ай бұрын

@MatthewPeechWoodworking try using tracing paper and charcoal or pencil...just like in the spy movies to make a paper copy of a unique piece you need to make another of. For example if you are replacing a broken inlay but can't remove the inlay completely...carefully chip out the broken section to leave a straight edge in the design. Place the tracing paper over the empty space and the good piece...using gentle pressure rub your charcoal pencil (can be purchased in art supply store) back and forth to reveal the pattern! Been done on old grave stones to reveal faded lettering.

@rhettbrown1372 5 ай бұрын

I call it character

@toddcrockett5957 5 ай бұрын

Love the 45 degree holder idea. Thanks.

@Sawfly1369 5 ай бұрын

Great vid. My wife and I probably watch every episode that you put out. So many tips that I may need to start taking notes, lol.

@petrag.4092 5 ай бұрын

Thank you for sharing.👍🙏🇺🇸

@MatthewPeechWoodworking 5 ай бұрын

Thanks for watching!

@chrisb2557 5 ай бұрын

Loved the corner clamp trick!!

@shawnevans827 5 ай бұрын

I just used the sawdust wood filler trick this week on my table project in Puerto Vallarta. Probably need it in the chairs too which I just cut the pieces today for.

@abrahamrodriguez1569 2 ай бұрын

I appreciate your videos. Thanks.

@kellyblodgett3214 5 ай бұрын

Thank you for this video. I’m going to be making this jig today, what a great hack! Thank you thank you!

@MatthewPeechWoodworking 5 ай бұрын

You bet!

@martingilmour4968 3 ай бұрын

Your videos have really helped me through alot mate. thank you ❤

@dcruicks1 5 ай бұрын

As usual I learned so much. The only thing I could add is I use the painter tape to do handles. Thanks Matt

@jefferyszalaj2308 5 ай бұрын

thanks for the great videos

@MatthewPeechWoodworking 5 ай бұрын

Thanks for watching!

@crustyoldoffroader7436 5 ай бұрын

Great stuff Matthew, thank you

@MatthewPeechWoodworking 5 ай бұрын

No worries!

@oliviadejong6000 5 ай бұрын

Great video! Thanks!

@MatthewPeechWoodworking 5 ай бұрын

You bet!

@kris_kreations 5 ай бұрын

Awesome tips. Thanks

@MatthewPeechWoodworking 5 ай бұрын

No problem!

@MaddMaxxWoodWorks 5 ай бұрын

Thank you Mathew

@MatthewPeechWoodworking 5 ай бұрын

You’re welcome!

@warrenbridges4095 5 ай бұрын

I just recently came across your channel and I'm enjoying your content. I've been building things out of steel for over 30 years as a job & doing side work / builds out of wood for 5 years. I recently finally decided to name a business and start making some money on my wood builds instead of just the home repairs & remodeling that I've been doing & was searching KZfaq for guidance on the direction that I wanted to start off in with my business. Your channel has been the best guide that I've found & your delivery is very professional. I don't have a patron but I believe I will join for the first time to get better info. Thank you sir for your information.

@MegaDadof6 5 ай бұрын

Great video tips. Going to make those corner jigs. Thanks

@georgemaerkle3427 5 ай бұрын

Brilliant 😊

@MatthewPeechWoodworking 5 ай бұрын

You bet

@robertapreston4200 Ай бұрын

I've used all these tricks except the corner clamps.....NEVER have I seen this.! AWESOME!! And as always, thanks.

@Jimc4007 5 ай бұрын

The dowel idea is great! Never seen anything like that before. I'll have to give it a shot!

@mattedwards4533 3 ай бұрын

good tricks and good presentation.

@hollyknapp2650 5 ай бұрын

❤ always love your videos

@roncolpo3731 5 ай бұрын

I'm a 40 + year cabinet maker finish carpenter,as a foreman I have done exhibit work for maps air museum, nasal, princess Diana museum , and the rock and roll hall of fame in cleveland........I found your videos 3 days ago....excellent content thank you

@johnbaker1263 5 ай бұрын

I save my small off cuts and sawdust as you did, but I also use them to eliminate knots. Drill them out and fill them. Works great, hope you try it.

@jennieholmesrealtor8957 Ай бұрын

LOVE your videos! LOVE your smalls! BUT I'm nervous to try many of them because my dad, despite tons of safety measures, had a table saw "kick" and pull him thumb and forefinger into the blade when I was a kid and that's all I can imagine when I think about trying! Maybe make a video helping us build some confidence with that piece of machinery?

@kellydelmas6628 5 ай бұрын

Thanks Have a Blessed day

@MatthewPeechWoodworking 5 ай бұрын

You too!

@Cotton2Ennis 5 ай бұрын

Just wrapped up Christmas projects and wished I had know about the drilled and miter clamp, I will incorporate this in my meek and tiny "shop" , this will save much time and take up virtually no space. Best wishes to you and yours in '24

@MatthewPeechWoodworking 5 ай бұрын

Thank you so much for your kind words! I'm glad you found the miter clamp helpful for your Christmas projects. Best wishes to you and yours as well in '24!

@donmiller8712 5 ай бұрын

As always, a great video

@COLTUL_RUSTIC_93 5 ай бұрын

AWESOME, AWESOME, AWESOME AS ALWAYS, MATT !!!

@MatthewPeechWoodworking 5 ай бұрын

Thanks!

@alsprettycreations8005 5 ай бұрын

Excellent

@MatthewPeechWoodworking 5 ай бұрын

Thanks

@ERLong-ww7yn 3 ай бұрын

Awesome video. Love this channel.

@joeplume8048 5 ай бұрын

Love the tips and tricks videos, can’t wait for the next one. Would you happen to have one for cracks in wood besides filler or a bow tie?

@Eagles25 5 ай бұрын

Great video!!! Learned some great hacks! Love the channel. Thank u.

@MatthewPeechWoodworking 5 ай бұрын

Awesome! Thank you!

@marting.7564 5 ай бұрын

Great idea 👍🏽

@MatthewPeechWoodworking 5 ай бұрын

Thank you! 😊

@davidjefferds8532 5 ай бұрын

I'd like to see more of these type videos.

@shawnr771 5 ай бұрын

Good tips and tricks. Happy New Year.

@MatthewPeechWoodworking 5 ай бұрын

Happy new year!

@shawnr771 5 ай бұрын

@@MatthewPeechWoodworking I have really appreciated all the tips and tricks videos. Although I am not a woodworker per se. They help when doing handyman work. Sometimes those angles and cuts have to be as perfect as possible. Every little bit of information makes life easier.

@brentfowler2317 5 ай бұрын

Hey bud, when you grab your wood filler and it's dried out. You can simply add a little water to it. And mix it together, rehydrating the filler. The more water you add the longer it'll take to dry. I worked in a cabinet shop for a could years, and that's something I started doing there. Anymore thanks for the great content. Until next time.

@samanthahannon8894 5 ай бұрын

YES. Bloody love you , thanks

@MatthewPeechWoodworking 5 ай бұрын

Thanks for watching!

@tyson457 3 ай бұрын

Your videos are the best wood working videos on KZfaq, keep up the great work bro.

@hansdegroot8549 4 ай бұрын

Great tips. Thanks for sharing. I heard about most of them before, but they were never so well explained. I did keep/save and use saw dust in small containers to eventually fill holes with, but the results never were that good. Sanding dust is much better

@user-gf2hu7mk7x 4 ай бұрын

I just started woodworking. I finished a couple of projects and pretty proud of myself. Wish we could post pictures of our projects. But I like this I'll make some soon :)

@420driftcamper 4 ай бұрын

Man, the dust was cool, the 45 scrap clamp is awesome!!!

@johndunn3615 5 ай бұрын

Miter clamp is brilliant. I was planning on buying a strap for clamping a box, but this just beats the hell out of that. Simple and efficient, great video keep them coming. I like the dowel tip , I have avoided dowels up until now and have been using Kreg, maybe I will give this a try and use a few less Kreg screws.

@MatthewPeechWoodworking 5 ай бұрын

Worth a try!