I like this guy. Straight talking. Knows his business. Clear and concise. I also like the fact there is NO MUSIC. Good job FH!

That tip about cutting with miter saw and moving the trip in a few tines was gold

My favorite part of these types of videos is how they bring out all the know-it-all, ultimate construction, tough guys saying how everything this guy did was wrong. The very guys that made me leave the trades. Nothing wrong at all with how this guy trimmed the door. If it looks good at the end, you did it right. Period.

Wow a video that was straight to the point and actually good information also. He didn’t even tell us to subscribe and like all of his videos for 5 minutes. 👍🏻 appreciate people like this.

This gentleman is a delight to watch and his narration is crystal clear...GREAT VIDEO SIR...

Kudos to you for putting the header up first. I've had arguments with carpenters who insist on putting the legs on first. This causes a "trap" situation where both header miters have to fit the legs perfect or you end up short after making your adjustments. With the header on first you can adjust the miter on the leg if you need to and most of the time a small space at the floor is going to be of no consequence, or possibly being cut even shorter by the flooring installer.

I own my home and it was build in 1952 and back them no tools no ideas of this work of art this video is gold to me i have to do all my doors and windows thank you papi

This was fantastic. Thank you so much for the wisdom!

You gave really great directions, clear and concise. Thanks.

Did my first door trim today thank you! I was lost before I saw this.

This video was extremely helpful. It shows how to measure properly and how to start. Also how to get great miter joints.

All I can say .Thank You.my knowledge just got better with the extra tips I got from You.

good job my friend. very straightforward.

Made easy! Looks great, thanks.

Now I can tackle this after this straightforward, no nonsense video. 👏🏻

Fantastic work and decent length of video. Definitely subscribing to this one, thanks man!

Great video! This encouraged me to take a solo flight into framing my apt doors the easy and correct way. Thanks Mr: Larson!

thank you sir you are a great instructor. Awesome

Nice video! Good job keeping it simple. Sometimes with a corner that is fighting me to get tight miters, I'll barely lift the front edge of the casing as I make the cut on the saw. This provides a very subtle back bevel to your cut, and is sometimes just enough to allow your joint to be tighter. For DIY first timers, make sample corners out of scrap pieces first before you go cutting your final pieces. Not every corner is a true 90 so making samples and recording the angles on the backs will allow you to make the correct cut the first time on your good pieces. Also, cut 1/16 or more away from your pencil line if this is your first time doing this. Bring the piece up to the door and check for accuracy, you'd be amazed at how short you may come up by simply trusting your line the first time. It happens, and at least if you're too long, you can go back to the saw and nibble away a bit more until it's correct. Moldings aren't cheap, so do it right the first time. And the obvious, if you're planning on painting this, buy pre-primed paint grade molding, not the unfinished stuff. You'll save a lot of money.

Great tips and to the point. I feel super confident now. Thanks.

Awesome video, been looking at a lot of videos but this one is the best. Starting from the top is the best way

Great video, concise explanation, love the tips of not having to measure with a tape. Thanks for taking the time.

Wow, that was some amazing hacks there. Doing it this way I will never need a tape measure.

You have saved me a ton of future mistakes by teaching me how to use a test piece to check my miter before cutting the side trim! It’s such a simple hack that I’m embarrassed I didn’t think of it myself. Great instructional video that is easy to understand and follow with great details and tips regarding how to find the short points of the top trim, to dip the blade and move the board until you get to your mark before making a full cut, to keep your nails and inch away from the outside corners to prevent splitting, and to wipe away the glue before it dries. A+

This guy is so Smooth .. lol. Love the video

Great work, thank you!

Excellent. Thank you for sharing.

very easy to follow, makes perfect sense

Great video. Thanks for sharing.

You make it look so easy. Thanks!

Great video!

Bang on, great video, thank you

Great staff. Many thanks.

I was taught to nail the trim to the door casing all the way around and then a nail through the miters BEFORE nailing the entire trim to the wallboard......Just a different way to skin a cat. Great video!

Special video.Congrats

Great teacher man thank you

Looks great

OMG . . . I love how he teaches. I've laid engineered flooring, ceramic tile and wainscoting and I was terrified of trim and moulding. Until NOW! He has given me a huge boost of confidence. Now I need to find his video on crown moulding and baseboard trim!

Great straight forward video! 5 stars

Awesome video, thank you!

Thank you so much. Great video!

Super job , bravo .

Perfect work 👍

Nice job. Thank You !!!

Awesome tips. SUBSCRIBED!

Idk why but I like this guy alot.

Thanks for sharing this knowledge. I am about to hang three interior doors. Really helpful.

this is o great thank everyone for all your great help

Good work!!

Thanks for the video!

Very good video- thanks!

excellent tip

Great institutional video, thank you, im tackling baseboards and door trim.

Good Job teacher

Great information. Thanks

Great vid great details thank you

Great video.. Helped me out a ton.

Looks easy enough. Thank you Travis. I'm going to give it a go and fix my sticky door.

Well done mate 🙏

Excellent!

Another great video.. very informative..

I love this guy

Great tip, made easy. THANKS

Very nice show. Thanks for all the info

You are the man.

Congrats on a really good video.

Good work thanks.

Thank you

Thanks 😎great job señor

Thank you you give me a big idea I like your tutorial.

Best video ever.

Nice video. Well done.

Well done.

- VERY good info. Thanx.

Very informative

Good job. I like it. I want these 2 tools for my husband.

Great vid thank you

Very very good. Congratulations FROM Brazil

good job

Great video.. Thanks

great video guy explains stuff excellent

非常好，清析，实用，赞

Nice job on this video! Ive installed a lot of door moulding and these little tips helped a lot!

Thank you so much ! I learned something today.

1 word for this gentleman. HOLY CRAP YOU'RE GOOD!

nice job brother thanks 🇭🇳😍🇺🇸

Good video primo

Thank you.

8:43 Best Part!

Good video!

Simple and looks great, nice video.

I love watching these older videos!!

Cheers mate.

Awesome video I’m 23 just got my first house and doing all the work myself great tips

thank you so much! now i have the courage to do it, just need to convince the wife!

One of the best how to vids I've ever seen.

Nice job

A million bucks job !!!!!!!!!👍

thank you very good job , my respects

Good job